Optimization of Extraction Process for Total Flavonoids from Penthorum chinense Pursh and Comparison of Their Contents from Different Parts

[Objectives]This study was conducted to optimize the extraction process of total flavonoids from Penthorum chinense Pursh and compare their contents from different parts.[Methods]Single factor and orthogonal experiments were designed to optimize the extraction process of total flavonoids from P.chinense Pursh with the volume fraction of ethanol,the ratio of material to liquid,heating reflux extraction time and extraction times as factors,and the content of total flavonoids as the index.A verification test was carried out.The optimized extraction process was adopted to compare the contents of total flavonoids from different parts of P.chinense Pursh.[Results]The best extraction process was extracting the powder of P.chinense Pursh for 2.0 h with 20 times of 55%ethanol by reflux twice.Under this condition,the contents of total flavonoids were 3.63%,8.90%,11.28%,and 4.36%from stems,leaves,flowers and whole grass of P.chinense Pursh,respectively.[Conclusions]The process is reasonable,feasible and stable,and can effectively extract total flavonoids from P.chinense Pursh.The contents of total flavonoids from different parts of P.chinense Pursh were quite different,and the value was higher in the leaves and flowers,so the proportions of leaves and flowers should be paid attention to in the industrial processing of P.chinense Pursh.

Investigation of extraction fraction in confined impinging jet reactors for tri-butyl-phosphate extracting butyric acid process

The extraction fraction E and overall volumetric mass transfer coefficient kka of TBP extracting butyric acid pro- cess in confined impinging jet reactors （CIJR） with two jets were investigated. The main variables tested were the concentration of tri-butyl-phosphate （TBP） and butyric acid, the impinging velocity V, the impinging velocityratio of two phases Vorg/Vaq, the nozzle inner diameter di and the distance L between the jet axes and the top wall of the impinging chamber. The results showed that E and kLa increase with an increase of the impinging velocity V, the concentration ofTBP Corg, and the impinging velocity ratio Vor/Vaq. However, E and kta decrease with an increase of the inner diameter d1 from 1 to 2 mm, the concentration of butyric acid Caq from 0.5% （v/v） to 2% （v/v）. The factor L ranging from 3 to 11 mm has a negligible effect on E and kLa. A correlation on these variables and kLa was proposed based on the experimental data. These results indicated good mass transfer oerformance of CIJR in the extraction operation.

Extraction Process and Quality Standard of Danshen Jianxin Capsules

[Objectives]This study was conducted to establish the quality standard of Danshen Jianxin Capsules.[Methods]Orthogonal design was adopted to optimize the water extraction process by taking the amount of water added,extraction time and extraction times as factors,and the content of tanshinone I as the index.Salviae Miltiorrhizae,Notoginseng Radix Et Rhizoma and Radix Astragali in the capsules were qualitatively identified by TLC,and the content of tanshinone I in the capsules was determined by HPLC.[Results]The best water extraction process included the steps of adding 12 times of water each time,extracting the materials twice,for 1 h each time.In TLC identification,the test samples showed spots of the same color at the positions corresponding to tanshinone II A,ginsenoside Rg1,notoginsenoside R1 and astragaloside IV reference samples.[Conclusions]Danshen Jianxin Capsules was prepared by the water extraction method,which is characterized by high efficiency and being suitable for mass production.The quality control method is reliable,fast and accurate,which can effectively control the quality of the product.

Extraction Process of Zhuang Medicine Fumigation Lotion

[Objectives]To establish the extraction process and quality standard method of Zhuang medicine fumigation lotion.[Methods]The orthogonal design method was employed to optimize the water extraction process with the amount of water added,decocting time and extraction times as factors,and syringin content and dry extract yield as indexes.The content of syringin was determined by high performance liquid chromatography.[Results]The best water extraction process was:soaking in water for 1 h,decocting twice,added 10 times the amount of water each time,decocting for 1 h.The average content of syringin in 3 batches was 0.98 mg/g,and the average dry extract yield was 26.07%.[Conclusions]The project adopts water extraction method to prepare Zhuang medicine fumigation lotion,which has the characteristics of high efficiency and suitable for large-scale production.The quality control method is reliable,rapid and accurate,and can effectively control the quality of the lotion.

Study on Extraction Process of Phytoene from Tomato Paste

With tomato paste as raw material, the optimal extraction process of phy- toene from tomato paste was explored by orthogonal experiment on the basis of single-factor experiments. The results showed that the optimal extraction process for phytoene from tomato paste was as follows： extractant, acetone; solid to liquid ratio, 10：1; extraction time, 40 min; extraction temperature, 45 ℃. The developed extrac- tion process was stable, reasonable and feasible. Under the optimal extraction pro- cess, the extraction rate of phytoene reached 0.044 4%.

Optimization of Polysaccharides Extraction from Physalis alkekengi L.Peel and Its Effect on the Expression of Inflammation-Related Proteins in SW620 Cells

Objective:To establish an optimized aqueous extraction process for polysaccharides from Physalis alkekengi L.peel and to preliminarily explore its in vitro anti-inflammatory activity against colorectal cancer SW620 cells.Methods:A single-factor test combined with orthogonal test analysis was used to evaluate the effects of the material-to-liquid ratio,extraction temperature,and extraction time on the yield of polysaccharides from Physalis alkekengi L.peel.The antioxidant activity of the polysaccharides was assessed by analyzing their free radical scavenging ability in vitro,and the anti-inflammatory effect was evaluated using SW620 cells.Results:The optimal extraction conditions were a material-to-liquid ratio of m(g):V(mL)=1:30,an extraction temperature of 100℃,and an extraction time of 40 minutes,with a predicted polysaccharide yield of 25.7%.The polysaccharides from Physalis peruviana peel effectively scavenged DPPH,superoxide anion,and hydroxyl radicals.After treatment with Physalis peruviana polysaccharides,the levels of IL-1β,IL-18,and TNF-αin the cell culture medium were significantly reduced,and the phosphorylation level of P65 protein in SW620 cells was decreased.Conclusion:This extraction method is stable and reliable,and the prepared Physalis alkekengi L.polysaccharides exhibit significant in vitro antioxidant and anti-inflammatory activities.This study provides a theoretical basis for developing drugs for the prevention and treatment of colorectal cancer.

Optimization of Extraction Process of Clerodendrum philippinum Schauer var. simplex Mlodenke Total Flavonoids(CPTF) by Central Composite Design-Response Surface Methodology

[Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Based on single-factor test,ethanol concentration,extraction temperature and extraction time were taken as independent variables,and total flavonoids yield was taken as dependent variable. The test was conducted according to central composite design principle. Multivariate linear regression and binomial equation fitting of the result were conducted,and extraction process of CPTF was optimized by using response surface methodology. [Results]The optimal extraction process of CPTF was as below: ethanol concentration 54. 76%,extraction temperature 83. 92℃,extraction time 102. 64 min,solid-liquid ratio 1:20,extraction for twice. [Conclusions] The extraction process of CPTF by central composite design-response surface methodology was simple and feasible,with reliable prediction result,which was suitable for industrial production.

Optimization of the Extraction Process of Astaxanthin from Haematococcus pluvialis with Oil Dissolution Method

[ Objective ] This study aimed to optimize the extraction process of astaxanthin from Haematococcus pluvialis with oil dissolution method. [ Method ] Small amounts of acetone or ethanol were separately added into soybean oil for astaxanthin extraction. The extraction efficiency of astaxanthin from H. pluvialis with different methods was compared. [ Result] The extraction efficiency of astaxanthin from H. pluvialis with acetone, acetone ＋ soybean oil, ethanol ＋ soybean oil, soybean oil was 20.46, 21.65, 20.85 mg/g and 13.05 mg/g, respectively. According to the results, acetone ＋ soybean oil led to the highest extraction rate, which was approximately twice that of soybean oil and higher than that of acetone. [ Conclusion ] This study laid the foundation for large-scale production of astaxanthin.

Comparative Study on the Different Extraction Processes of Dietary Fiber from Sweet Potato

[Objective] To compare the extraction results of several different methods. [Method] The dietary fiber was extracted from sweet potato respectively by the sieve method, the enzymatic process and enzyme-alkali method. The extraction results of the three methods were optimized and compared. [Result] The extraction rate of dietary fiber by enzymatic method was the highest, which could reach 38% of total potato residue. The properties of dietary fiber extracted by the three methods were compared, the results indicated that the dietary fiber extracted by enzymatic method had good water-holding capacity, soil absorption and expansion. [Conclusion] The enzymatic method is the best for extracting dietary fiber from sweet potato.

Optimization of Quality Control Method and Ethanol Extraction Process of Psoralen and Bergapten in Ficus pandurata

[Objectives]To establish a qualitative identification and content determination method for psoralen and bergapten in the roots and leaves of Ficus pandurata,and the multi-indicator scoring method to optimize the ethanol extraction process for the effective parts of F.pandurata.[Methods]Qualitative identification was carried out by thin-layer chromatography(TLC)and content determination was made by high-performance liquid chromatography(HPLC);the content of psoralen and bergapten and extract yield were used as indicators,to investigate the effects of ethanol volume fraction,solid-to-liquid ratio,extraction time and extraction times on the ethanol extraction process of F.pandurata;multi-indicator scoring method was adopted,orthogonal test method was designed to optimize the extraction process,and verification test was performed.[Results]TLC chart of F.pandurata shows clear spots and good separation;the detected concentrations of psoralen and bergapten in the roots are in the range of 1.02-32.64μg/mL and shows a good linear relationship with the peak area(r=0.9997);these components have not been detected in the leaves,and the precision,RSD of stability and repeatability test is less than 2%;the average recovery rate was 99.8%-100.2%,and the RSD value is 1.12%-1.13%(n=6);the optimized extraction process is to use 50%ethanol as the extraction solvent,the solid-to-liquid ratio of 1∶10,reflux extraction of 3 times,and 1.5 h each time;the results of the three batches of verification tests show that the content of the two indicator components obtained is high,and the average value of the total amount is 0.34 mg/g(RSD=0.30%,n=3).[Conclusions]The established quality control method for F.pandurata is simple,easy,accurate and reproducible;the preferred extraction process is stable and feasible,suitable for the extraction and purification of coumarin effective parts in F.pandurata roots,so it is expected to provide references for further development of F.pandurata.

Optimization of Extraction Process of Zihua Qinghuo Capsule by Orthogonal Test

With quercetin content and yield of dry extract as investigation indices, three factors, amount of water added, decoction time and decoction times were investigated by an orthogonal test, so as to select the optimal water extraction process for Zihua Qinghuo Capsule. The determined extraction process was adding 8 times of water in five herbs including Viola philippica and decocting for 2 times, 1.5 h each time. Pilot scale test demonstrated that the selected process is stable and feasible, and could provide reliable reference for practical production.

Process Optimization and Content Determination of Total Flavonoids of Zhuang Medicine Clerodendrum japonicum(Thumb.)Sweet

[Objectives]To optimize the extraction process of total flavonoids of Zhuang medicine Clerodendrum japonicum(Thumb.)Sweet and establish a method for its extraction and content determination.[Methods]The total flavonoids of C.japonicum were extracted by reflux extraction method.Through a single factor experiment,the effects of extraction method,extraction solvent concentration,extraction volume and extraction time on the total flavonoids content of medicinal materials were investigated to select the optimal extraction process of the total flavonoids of C.japonicum.[Results]The optimal extraction process of the total flavonoids of C.japonicum was 75%ethanol,1∶20 solid-to-liquid ratio,and 50 min reflux extraction time.[Conclusions]This method can effectively determine the content of total flavonoids in C.japonicum and provide a certain scientific basis for the study of the quality standard of this Zhuang medicine.This method has high reproducibility.It is stable and feasible in extraction of total flavonoids from Zhuang medicine C.japonicum.

Extraction Process and Content Determination of Caffeic Acid in Laggera alata from Different Production Areas of Guangxi

[Objectives] To establish a method for determining the content of Laggera alata( D. Don) Sch. Bip. Ex Oliv. using caffeic acid the target component,and to compare the content of caffeic acid in the medicinal materials of L. alata in different production areas of Guangxi.[Methods]The content was determined by Inertsil~ODS-3 chromatographic column C_(18)( 4. 60 mm × 250 mm,5 μm,mobile phase: acetonitrile-0. 1% phosphoric acid( 22∶ 78),detection wavelength: 320 nm,flow rate: 1. 0 m L/min,column temperature: 30℃,and injection volume: 10 μL. [Results] The caffeic acid showed a good linear relationship in the range of injection volume of 0. 025 92-0. 259 2 μg( R =0. 999 5). The average recovery rate was 98. 33%( RSD = 1. 85%). L. alata in different production areas of Guangxi contained the caffeic acid,and there was a great difference in the caffeic acid. L. alata in Baise had the highest content of caffeic acid,while that in Guilin had the lowest content of caffeic acid. [Conclusions]This method can accurately determine the content of caffeic acid and is expected provide a scientific basis for the development and utilization of herbal medicine L. alata.

Optimization of Extraction Process of Olive Leaves by RSM and Evaluation of Antioxidant Capacity Measurements to the Mixtures

Water extracts prepared from seven varieties of olive leaves native to the Mediterranean area but planted in Sichuan province, P.R. China, namely Frantoiao, Leccio, Ezhi, Picholine, Pendollino, Chenggu and Huaou 9#, were examined for their total phenonic and flavonoid contents, antioxidant capacity. Total phenolic and flavonoid content were measured by Folin-Ciocalteu method and a colorimetric method, respectively. ABTS＋ method and FRAP were used for examining antioxidant activity. Response surface methodology （RSM） was used for optimizing the extract condition. Under the optimum condition, the total phenolic and flavonoid content of aqueous extracts of the dry olive leaves （DOL） ranged from 40.27 to 56.58 mg gallic acid （GAE）/g DOL and 21.59 to 33.72 mg catechin （CE）/g DOL in June, 34.31 to 52.81 mg GAE/g DOL and 17.11 to 23.53 mg CE/g DOL in November. The ABTS＋ method and FRAP ranged from 0.23 to 0.35 mmol trolox （TE）/g DOL and 313.01 to 409.69 μmol Fe2＋/g DOL in June, 0.19 to 0.30 mmol TE/g DOL and 254.69 to 418.10 pmol Fe2＋/g DOL in November. Our results revealed that the total phenolic and flavonoid, or antioxidant capacity of the water extract were higher in June than November. Moreover, it was noticed that the antioxidant activity depends on the flavonoid and phenolic.

Optimization of the Ultrasonic-assisted Extraction Process for Total Flavonoids in Primula sikkimensis Hook.by Response Surface Methodology

[Objectives]To optimize the ultrasonic-assisted extraction process for total flavonoids in Primula sikkimensis Hook.[Methods]The effects of ethanol volume fraction,extraction time,extraction temperature,ultrasonic time and solid-to-liquid ratio on the yield of total flavonoids were investigated by single factor method,and the extraction process for total flavonoids in P.sikkimensis was optimized by Box-Behnken experimental design.[Results]The optimal extraction process for total flavonoids in P.sikkimensis was ethanol volume fraction 45%,extraction time 29 min,extraction temperature 80℃,solid-to-liquid 1∶40(g/mL)and ultrasonic time 10 min.Under such conditions,the average yield of total flavonoids in P.sikkimensis was 3.09%.[Conclusions]The optimized extraction process is simple and feasible,and is expected to provide a reference for the extraction of total flavonoids in P.sikkimensis.

Thin-layer Identification,Extraction Process and Content Determination of Chlorogenic Acid in Laggera alata(D.Don)Sch.Bip.ex Oliv.

[Objectives]This paper aims to establish thin-layer identification and content determination method for Laggera alata(D.Don)Sch.Bip.ex Oliv.with chlorogenic acid as the index component and compare the content of chlorogenic acid in L.alata from different places in Guangxi.[Methods]Silica gel GF254 thin-layer plate was used for identification under an ultraviolet lamp(365 nm),with butyl acetate-formic acid-water(V∶V∶V=7∶2.5∶2.5)as a developing agent.The content of chlorogenic acid was determined under the following chromatographic conditions:column,Inertsil ODS-3 C18 column(4.60 mm×250 mm,5μm);mobile phase,methanol-0.1%phosphoric acid(28∶72);detection wavelength,329 nm;flow rate,1.0 mL/min;column temperature,25℃;and injection volume,10μL.[Results]Chlorogenic acid can be detected by thin layer chromatography with clear spot and good specificity.Chlorogenic acid showed a good linear relationship in the injection amount range of 0.099-0.99μg(R^(2)=0.9999).The content of chlorogenic acid in L.alata varied greatly among the 10 different producing areas in Guangxi.L.alata produced in Dee Township,Longlin,Baise,Guangxi showed the highest chlorogenic acid content,and that produced in Shangsi County and Pingle County showed the lowest chlorogenic acid content.[Conclusions]This method can effectively identify L.alata and accurately determine the content of chlorogenic acid,thereby providing a scientific basis for the development and utilization of L.alata resources.

Optimization of the extraction process of total flavonoids from Trichosanthis Fructus by Box-Behnken response surface method combined with differential spectrophotometry

Objective:To optimize the extraction process of total flavones in Trichosanthis Fructus(composed of Trichosanthis pericarpium and Trichosanthis semen in certain proportion).Methods:The effects of the mixture ratio of Trichosanthis pericarpium and Trichosanthis semen,ethanol concentration,ultrasonic extraction time and extraction temperature on the extraction rate of total flavonoids in Trichosanthis Fructus were investigated.The extraction process of total flavonoids in Trichosanthis Fructus was optimized by Box-Behnken response surface method combined with differential spectrophotometry.Results:The optimum extraction conditions of total flavonoids in Trichosanthis Fructus were as follows:The mixture ratio of Trichosanthis pericarpium and Trichosanthis semen was 4:6,the ethanol concentration was 70%,the ultrasonic extraction time was 60min and the extraction temperature was 40℃.Conclusion:Box-Behnken response surface method combined with differential spectrophotometry can optimize the extraction process of total flavonoids from Trichosanthis Fructus,which can provide reference for the extraction and application of total flavonoids in Trichosanthis Fructus.

Extraction Process and Content Determination of Total Flavonoids in Lonicera japonica

[Objectives]To optimize the extraction process of total flavonoids of Lonicerae japonica and establish a method for its extraction and content determination.[Methods]The total flavonoids of L.japonica were extracted by reflux extraction method.Through a single factor experiment,the effects of extraction method,extraction solvent concentration,extraction volume and extraction time on the total flavonoids content of medicinal materials were investigated to select the optimal extraction process of the total flavonoids of L.japonica.[Results]The optimal extraction process of the total flavonoids of L.japonica was 70%ethanol,1∶30 of solid-to-liquid ratio,and 1.0 h of reflux extraction time.[Conclusions]This method can effectively determine the content of total flavonoids in L.japonica and is expected to provide a certain scientific basis for the study of the quality standard of L.japonica.This method has high reproducibility.It is stable and feasible in extraction of total flavonoids from L.japonica.

Extraction Process of Total Flavonoids from Eucommiae Cortex and Its in vitro Antioxidant Activity

[Objectives]To optimize the extraction process of total flavonoids from Eucommiae Cortex,establish the extraction and content determination methods of its medicinal materials,and study its in vitro antioxidant activity.[Methods]The total flavonoids from Eucommiae Cortex were extracted by reflux extraction method,and the effects of extraction method,extraction solvent concentration,extraction volume,and extraction time on the total flavonoids content of the medicinal materials were explored through the single factor experiment.Orthogonal experiment was carried out to optimize the extraction process conditions,and the optimal extraction process for total flavonoids from Eucommiae Cortex was screened out.The total antioxidant capacity index was used to determine the free radical scavenging ability of the total flavonoids from Eucommiae Cortex.[Results]The optimal extraction process of total flavonoids from Eucommiae Cortex was 50%ethanol,1∶40 solid-to-liquid-ratio,and 1.5 h reflux extraction time.Through the antioxidant experiment in vitro,it is found that the total flavonoids from Eucommiae Cortex have a higher scavenging ability for the total antioxidant capacity,and there is a certain positive correlation with the mass concentration of total flavonoids.[Conclusions]This method can effectively determine the total flavonoids content of Eucommiae Cortex medicinal material,and provide a certain scientific basis for the quality standard research of the medicinal material.The total flavonoids from Eucommiae Cortex have good in vitro antioxidant activity.And the method for extracting total flavonoids from Eucommiae Cortex medicinal material in this experiment has good repeatability,high stability and feasibility.

Advances in Research of Extraction Processes and Anti-aging Effect of Flavonoids in Traditional Chinese Medicines

Flavonoids are secondary metabolites in plants and possess extensive pharmacological activities.Flavonoids have remarkable effect in prevent anti-tumor and cancer,but flavonoids can't be synthesized directly in the body.According to the different properties and structures of flavonoids in Traditional Chinese medicines,different extraction methods should be selected.Besides,flavonoids have good anti-aging effects.Based on three theories of modern aging,the anti-aging effect of flavonoids was discussed.It is expected to provide a beneficial reference for further development and utilization of natural flavonoid resources.