Multistage sequential extraction with different sequences was applied to extracting natural surface coa tings（NSCs）, and the results were compared with those by single stage extraction technique. The optimal sequent...Multistage sequential extraction with different sequences was applied to extracting natural surface coa tings（NSCs）, and the results were compared with those by single stage extraction technique. The optimal sequential extraction scheme with the best performance was selected and incorporated into the method of selective extraction followed by adsorption and statistic analyses to study the adsorption parameters of Fe oxides, Mn oxides and organic matters in NSCs for Pb and Cd, to validate the applicability of the sequential extraction scheme. The Langmuir ad sorption parameters of each component of surface coating estimated according to the adsorption data of single stage extraction of NSCs were all similar to those of sequential extraction of NSCs, and the maximum difference between the metal adsorption abilities of the components estimated via the two extraction techniques was only about 20%, in dicating that either extraction techniques could be used. The optimal sequential extraction scheme obtained was first extracted with NH2OH·HCl, then with Na2S2O4, and finally with oxalic acid.展开更多
Ultra-high molecular weight polyethylene(UHMWPE)membranes were prepared by 5 wt%UHMWPE/parafn oil gels via thermally induced phase separation method and dried in air without signifcant collapse.The UHMWPE membranes we...Ultra-high molecular weight polyethylene(UHMWPE)membranes were prepared by 5 wt%UHMWPE/parafn oil gels via thermally induced phase separation method and dried in air without signifcant collapse.The UHMWPE membranes were annealed at 110℃ for increasing the pores size in order to decrease the capillary forces.Furthermore,a new multiple stage extractant exchange drying(MSEED)technique was adopted to decrease the shrinkage of the UHMWPE membranes.Specifcally,the parafn oil was extracted by dichloromethane,then dichloromethane was replaced by ethanol,next ethanol could be exchanged to other liquid which is non-afnity with UHMWPE,for example water.UHMWPE membranes(annealing for 25 min)dried by dichloromethane-ethanol-water-air process have the lowest volume shrinkage of 16.5%and the porosity is as high as 88.29%.Moreover,compared with supercritical CO_(2)(SC-CO_(2))drying,atmospheric drying UHMWPE membranes have a lower pure water permeance,but a higher carbon particles rejection.展开更多
基金Supported by the National Natural Science Foundation of China(No.20877033)the Major Science and Technology Pro-gram for Water Pollution Control and Treatment, China(No.2009ZX07207-001-03)
文摘Multistage sequential extraction with different sequences was applied to extracting natural surface coa tings（NSCs）, and the results were compared with those by single stage extraction technique. The optimal sequential extraction scheme with the best performance was selected and incorporated into the method of selective extraction followed by adsorption and statistic analyses to study the adsorption parameters of Fe oxides, Mn oxides and organic matters in NSCs for Pb and Cd, to validate the applicability of the sequential extraction scheme. The Langmuir ad sorption parameters of each component of surface coating estimated according to the adsorption data of single stage extraction of NSCs were all similar to those of sequential extraction of NSCs, and the maximum difference between the metal adsorption abilities of the components estimated via the two extraction techniques was only about 20%, in dicating that either extraction techniques could be used. The optimal sequential extraction scheme obtained was first extracted with NH2OH·HCl, then with Na2S2O4, and finally with oxalic acid.
基金This research is supported by Shanghai International S&T Cooperation Fund(No.16160731302)the Natural Science Foundation of China(No.51473031).
文摘Ultra-high molecular weight polyethylene(UHMWPE)membranes were prepared by 5 wt%UHMWPE/parafn oil gels via thermally induced phase separation method and dried in air without signifcant collapse.The UHMWPE membranes were annealed at 110℃ for increasing the pores size in order to decrease the capillary forces.Furthermore,a new multiple stage extractant exchange drying(MSEED)technique was adopted to decrease the shrinkage of the UHMWPE membranes.Specifcally,the parafn oil was extracted by dichloromethane,then dichloromethane was replaced by ethanol,next ethanol could be exchanged to other liquid which is non-afnity with UHMWPE,for example water.UHMWPE membranes(annealing for 25 min)dried by dichloromethane-ethanol-water-air process have the lowest volume shrinkage of 16.5%and the porosity is as high as 88.29%.Moreover,compared with supercritical CO_(2)(SC-CO_(2))drying,atmospheric drying UHMWPE membranes have a lower pure water permeance,but a higher carbon particles rejection.
