RATE VARIATIONAL EXTREMUM PRINCIPLES FOR FINITE ELASTOPLASTICITY

Dual variational extremum principles for rate problems of classical elastoplasticitv at finite deformation are studied in Updated Lagrangian rate forms. It is proved that the convexity of the variational functionals are closely related to a so-called gap function, which plavs an important role in nonlinear variational problems.

Constructal design for a steam generator based on entransy dissipation extremum principle

Steam generator is optimized by applying entransy dissipation extremum principle and constructal theory and adopting analyti-cal method.The obtained results show that the optimal spacing between adjacent tubes,the mass flow rate of gas and the maximum entransy dissipation rate all depend on the dimensionless diameter of one tube,the dimensionless pressure difference number and the dimensionless length of flow channel of gas.Besides the three dimensionless groups,the optimal numbers of riser tubes and downcomer tubes and their summation all depend on the dimensionless height of one tube.The maximum entransy dissipation rate increases as the pressure difference that drives the gas flowing increases,and as the diameter of one tube and the length of flow channel both decrease.The mean heat flux in the heat transfer process of hot gas grows greatly,and the performance of the system is improved.Compared with the optimal construct with heat transfer rate maximization,the optimal construct with entransy dissipation rate maximization can improved the heat transfer effect of the steam generator more.

Thermal insulation constructal optimization for steel rolling reheating furnace wall based on entransy dissipation extremum principle

Analogizing with the heat conduction process, the entransy dissipation extremum principle for thermal insulation process can be described as: for a fixed boundary heat flux (heat loss) with certain constraints, the thermal insulation process is optimized when the entransy dissipation is maximized (maximum average temperature difference), while for a fixed boundary temperature, the thermal insulation process is optimized when the entransy dissipation is minimized (minimum average heat loss rate). Based on the constructal theory, the constructal optimizations of a single plane and cylindrical insulation layers as well as multi-layer insulation layers of the steel rolling reheating furnace walls are carried out for the fixed boundary temperatures and by taking the minimization of entransy dissipation rate as optimization objective. The optimal constructs of these three kinds of insulation structures with distributed thicknesses are obtained. The results show that compared with the insulation layers with uniform thicknesses and the optimal constructs of the insulation layers obtained by minimum heat loss rate, the optimal constructs of the insulation layers obtained by minimum entransy dissipation rate are obviously different from those of the former two insulation layers; the optimal constructs of the insulation layers obtained by minimum entransy dissipation rate can effectively reduce the average heat loss rates of the insulation layers, and can help to improve their global thermal insulation performances. The entransy dissipation extremum principle is applied to the constructal optimizations of insulation systems, which will help to extend the application range of the entransy dissipation extremum principle.

EXTREMUM PRINCIPLE FOR VERY WEAK SOLUTIONS OF A-HARMONIC EQUATION

This paper deals with the very weak solutions of A-harmonic equation divA（x, u（x））=0 （＊）where the operator A satisfies the monotonicity inequality, the controllable growth condition and the homogeneity condition. The extremum principle for very weak solutions of A-harmonic equation is derived by using the stability result of Iwaniec-Hodge decomposition： There exists an integrable exponent r1=r1（p,n,β/α）=1/2[p-α/100n^2β＋√（p＋α/100n^2β）^2-4α/100n^2β] such that if u（x） ∈ W^1,r（Ω）is a very weak solution of the A-harmonic equation （＊）, and m ≤ u（x） ≤ M on ЭΩ in the Sobolev sense, then m ≤u（x） 〈 M almost everywhere in Ω, provided that r 〉 r1. As a corollary, we prove that the O-Dirichlet boundary value problem {div_A（x, u（x））=0,u∈W0^1,r（Ω）of the A-harmonic equation has only zero solution if r 〉 r1.

The Proof of Riemann Hypothesis, the Key to the Door Is the Periodicity

The Riemann hypothesis is a well-known mathematical problem that has been in suspense for 162 years. Its difficulty lies in the fact that it is involved in an infinite integral which includes infinite series with complex variables. To detour this is in vain, since all the messages are hid in it. To unscramble them, there is a totally new idea, that is, the “periodicity”! By investigating the numerical approximate values of zero points, an explicit distribution law on the critical line was found. To accord with this, a periodic form for the real part of Xi function was constructed and rigidly proved. The Riemann hypothesis can be divided into three progressive propositions. The first proposition (the number of zero points in the critical strip satisfies a certain estimation) had been proved in 1905. The second proposition (the number of zero points on the critical line satisfies the same estimation as in the critical strip) is ever in suspense. It can be solved perfectly with the newly found “periodicity”. The third proposition (all the nontrivial zero points are on the critical line), that is, the Riemann hypothesis, is also true. The proof is a combination of the symmetry, monotonicity, periodicity of the Xi function and the extremum principle of the harmonic functions. It is the moment to draw full stop for this suspending problem.

Constructal design progress for eight types of heat sinks

This review paper summarizes constructal design progress performed by the authors for eight types of heat sinks with ten performance indexes being taken as the optimization objectives,respectively,by combining the methods of theoretical analysis and numerical calculation.The eight types of heat sinks are uniform height rectangular fin heat sink,non-uniform height rectangular fin heat sink,inline cylindrical pin-fin heat sink(ICPHS),plate single-row pin fin heat sink(PSRPHS),plate inline pin fin heat sink(PIPHS),plate staggered pin fin heat sink(PSPHS),single-layered microchannel heat sink(SLMCHS)with rectangular cross sections and double-layered microchannel heat sink(DLMCHS)with rectangular cross sections,respectively.And the ten performance indexes are heat transfer rate maximization,maximum thermal resistance minimization,minimization of equivalent thermal resistance which is defined based on the entransy dissipation rate(equivalent thermal resistance for short),field synergy number maximization,entropy generation rate minimization,operation cost minimization,thermo-economic function value minimization,pressure drop minimization,enhanced heat transfer factor maximization and efficiency evaluation criterion number maximization,respectively.The optimal constructs of the eight types of heat sinks with different constraints and based on the different optimization objectives are compared with each other.The results indicated that the optimal constructs mostly are different based on different optimization objectives under the same boundary condition.The optimization objective should be suitable chosen based on the focus when the constructal design for one heat sink is performed.The results obtained herein have some important theoretical significances and application values,and can provide scientific bases and theoretical guidelines for the thermal design of real heat sinks and their applications.

Comparative study on constructal optimizations of T-shaped fin based on entransy dissipation rate minimization and maximum thermal resistance minimization

The constructal optimizations of T-shaped fin with two-dimensional heat transfer model are carried out by finite element method and taking the minimization of equivalent thermal resistance based on entransy dissipation and the minimization of maximum thermal resistance as optimization objectives, respectively. The effects of the global parameter a (integrating the coefficient of convective heat transfer, the overall area occupied by fin and its thermal conductivity) and the volume fraction ? of fin on the minimums of equivalent thermal resistance and maximum thermal resistance as well as their corresponding optimal configurations are analyzed. The comparison of the results based on the above two optimization objectives is conducted. The results show that the optimal structures based on the two optimization objectives are obviously different from each other. Compared with the optimization result by taking the minimization of maximum thermal resistance as the objective, the optimization result by taking the equivalent thermal resistance minimization as the objective can reduce the average temperature difference in the fin obviously. The increases of a and ? can all improve the working status of local hot spot and the global heat transfer performance of the system. But the improvement effects of the increases of a and ? on the minimization of equivalent thermal resistance are different from those on the minimization of maximum thermal resistance. For either objective, the effect of a is different from that of ?. The T-shaped fin with minimum equivalent thermal resistance is much taller than that with minimum maximum thermal resistance; for either optimization objective, the stem of fin is thicker than the branches of fin, and the stem thickness is relatively close to branch thickness when the minimization of equivalent thermal resistance is taken as the optimization objective. The T-shaped fin with flat stem and slender branches can benefit the reduction of the maximum thermal resistance.

Equivalent thermal resistance minimization for a circular disc heat sink with reverting microchannels based on constructal theory and entransy theory

Thermal designs for microchannel heat sinks with laminar flow are conducted numerically by combining constructal theory and entransy theory. Three types of 3-D circular disc heat sink models, i.e. without collection microchannels, with center collection microchannels, and with edge collection microchannels, are established respectively. Compared with the entransy equivalent thermal resistances of circular disc heat sink without collection microchannels and circular disc heat sink with edge collection microchannels, that of circular disc heat sink with center collection microchannels is the minimum, so the overall heat transfer performance of circular disc heat sink with center collection microchannels has obvious advantages. Furthermore, the effects of microchannel branch number on maximum thermal resistance and entransy equivalent thermal resistance of circular disc heat sink with center collection microchannels are investigated under different mass flow rates and heat fluxes. With the mass flow rate increasing, both the maximum thermal resistances and the entransy equivalent thermal resistances of heat sinks with respective fixed microchannel branch number all gradually decrease. With the heat flux increasing, the maximum thermal resistances and the entransy equivalent thermal resistances of heat sinks with respective fixed microchannel branch number remain almost unchanged. With the same mass flow rate and heat flux, the larger the microchannel branch number, the smaller the maximum thermal resistance. While the optimal microchannel branch number corresponding to minimum entransy equivalent thermal resistance is 6.

Non-local Problem for the Loaded Integral-differential Equation in Double-connected Domain

In this work an existence and uniqueness of solution of the non-local boundary value problem for the loaded elliptic-hyperbolic type equation with integral-differential operations in double-connected domain have been investigated. The uniqueness of solution is proved by the method of integral energy using an extremum principle for the mixed type equations, and the existence is proved by the method of integral equations.

Generalized Frankl-Rassias Mixed Type Equations in an Problem for a Class of Infinite Domain

In this paper, we study the boundary-value problem for mixed type equation with singular coefficient. We prove the unique solvability of the mentioned problem with the help of the extremum principle. The proof of the existence is based on the theory of singular integral equations, Wiener-Hopf equations and Fredholm integral equations.

Application of entransy to optimization design of parallel thermal network of thermal control system in spacecraft

For distribution optimization of the flow rate of cold fluid and heat transfer area in the parallel thermal network of the thermal control system in spacecraft,a physical and mathematical model is set up,analyzed and discussed with the entransy theory.It is found that the optimization objective of this problem and the optimization direction of the extremum entransy dissipation principle are consistent in theory.For a two-branch thermal network system,the distributions of the flow rate of the cold fluid and the heat transfer area are optimized by calculating the extremum entransy dissipation with the Newton method.The influential factors of the optimized distributions are also analyzed and discussed.The results show that the main influence factors are the heat transfer rate of the branches and the total heat transfer area.The total flow rate of the cold fluid has a threshold,beyond which further increasing its value brings very little influence on the optimization results.Moreover,the difference between the extremum entransy dissipation principle and the minimum entropy generation principle is also discussed when they are used to analyze the problem in this paper,and the extremum entransy dissipation principle is found to be more suitable.In addition,the Newton method is mathematically efficient to solve the problem,which could accomplish the optimized distribution in a very short time for a ten-branch thermal network system.