可调谐激光器在光纤传感和光纤通信中有着广泛的应用,引起了人们的广泛重视。设计并搭建了基于FFP-TF2滤波器的可调谐激光器系统。通过FPGA设计的基于DDS(direct digital frequency synthesis)函数信号发生器与模拟放大电路结合产生的...可调谐激光器在光纤传感和光纤通信中有着广泛的应用,引起了人们的广泛重视。设计并搭建了基于FFP-TF2滤波器的可调谐激光器系统。通过FPGA设计的基于DDS(direct digital frequency synthesis)函数信号发生器与模拟放大电路结合产生的驱动电压,调节FFP-TF2腔长的变化,进而改变激光器的输出波长。该系统可以实现对FFP-TF2单点电压和扫描电压的驱动,从而激光器可以输出单波长激光和多波长扫描激光,在激光器输出波长1532 nm^1568 nm范围内,可以调节单波长输出,也可以调节多波长扫描范围,且两种模式可以切换使用。实验结果表明,激光器输出3 dB线宽基本保持在0.01 nm左右,激光器输出中心波长与驱动电压线性拟合度为99.934%,灵敏度为3.915 nm/V,而FFP-TF2输出中心波长与驱动电压线性拟合度为99.986%,灵敏度为4.021 nm/V,激光器输出中心波长相对FFP-TF2的误差为2.6%,说明该激光器系统输出波长具有线宽窄、稳定性好、灵活性高等优点。展开更多
Employing a fiber Fabry-Perot (FFP) interferometer has been considered as a triangle notch filter to demodulate the wavelength of fiber Bragg grating (FBG) sensor.The single parameter of strain has been demodulated,an...Employing a fiber Fabry-Perot (FFP) interferometer has been considered as a triangle notch filter to demodulate the wavelength of fiber Bragg grating (FBG) sensor.The single parameter of strain has been demodulated,and the cross-sensitivity influence of temperature has been eliminated.The principle of this method is simple and easy to be implemented,and has been used to design a 30 t fiber grating weightbridge successfully.The maximal temperature drift error of the weightbridge is 4 με,which means that the full scale error is 8‰. The result reveals that the accuracy is high enough to be used in measurement.展开更多
文摘可调谐激光器在光纤传感和光纤通信中有着广泛的应用,引起了人们的广泛重视。设计并搭建了基于FFP-TF2滤波器的可调谐激光器系统。通过FPGA设计的基于DDS(direct digital frequency synthesis)函数信号发生器与模拟放大电路结合产生的驱动电压,调节FFP-TF2腔长的变化,进而改变激光器的输出波长。该系统可以实现对FFP-TF2单点电压和扫描电压的驱动,从而激光器可以输出单波长激光和多波长扫描激光,在激光器输出波长1532 nm^1568 nm范围内,可以调节单波长输出,也可以调节多波长扫描范围,且两种模式可以切换使用。实验结果表明,激光器输出3 dB线宽基本保持在0.01 nm左右,激光器输出中心波长与驱动电压线性拟合度为99.934%,灵敏度为3.915 nm/V,而FFP-TF2输出中心波长与驱动电压线性拟合度为99.986%,灵敏度为4.021 nm/V,激光器输出中心波长相对FFP-TF2的误差为2.6%,说明该激光器系统输出波长具有线宽窄、稳定性好、灵活性高等优点。
文摘Employing a fiber Fabry-Perot (FFP) interferometer has been considered as a triangle notch filter to demodulate the wavelength of fiber Bragg grating (FBG) sensor.The single parameter of strain has been demodulated,and the cross-sensitivity influence of temperature has been eliminated.The principle of this method is simple and easy to be implemented,and has been used to design a 30 t fiber grating weightbridge successfully.The maximal temperature drift error of the weightbridge is 4 με,which means that the full scale error is 8‰. The result reveals that the accuracy is high enough to be used in measurement.
