The prepolymerization and curing reaction kinetics of polyurethane/montmorillonite have been studied with end group analysis and FTIR respectively. It was found that the prepolymerization and curing reaction followed ...The prepolymerization and curing reaction kinetics of polyurethane/montmorillonite have been studied with end group analysis and FTIR respectively. It was found that the prepolymerization and curing reaction followed the 2nd-order kinetics. But the activation energy of prepolymerization increased from 42.7 kJ/mol to 56.5 kJ/rnol after the montmorillonite was added in the reaction system, and activation energy of curing reaction decreased from 64.4 kJ/mol to 17.5 kJ/mol. 2007 Bing Liao. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
In this study the copper and lead adsorption efficiency onto banana peels powder was investigated. The agroindustrial waste recovery represents one of the Circular Economy pillars. In the view of the synthesis of an e...In this study the copper and lead adsorption efficiency onto banana peels powder was investigated. The agroindustrial waste recovery represents one of the Circular Economy pillars. In the view of the synthesis of an environmentally friendly adsorbent material, the powder was used without any preliminary chemical or thermal activation, but only after simple washing, drying and grinding. The bio-adsorbent was characterized by the FTIR technique and tested in batch mode on synthetic aqueous solutions containing Pb and Cu in the range 10–90 mg·L^(-1). A selection of two(Langmuir, Freundlich) and three(Sips, Redlich–Peterson, Koble–Corrigan) parameter isotherm models was chosen to fit adsorption equilibrium data by non-linear regression procedure. The best fit isotherm model was selected relying on the error function with the lowest average percentage error(APE) value, among those characterized by the highest R^2 values. As expected, the three-parameter models are found to better represent both metals bio-adsorption, with APE and R^2 values always lower and higher, respectively, than the corresponding values obtained for the two-parameter models.展开更多
文摘The prepolymerization and curing reaction kinetics of polyurethane/montmorillonite have been studied with end group analysis and FTIR respectively. It was found that the prepolymerization and curing reaction followed the 2nd-order kinetics. But the activation energy of prepolymerization increased from 42.7 kJ/mol to 56.5 kJ/rnol after the montmorillonite was added in the reaction system, and activation energy of curing reaction decreased from 64.4 kJ/mol to 17.5 kJ/mol. 2007 Bing Liao. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金the Dept. of Chemical Engineering Materials Environment of Sapienza University of Rome
文摘In this study the copper and lead adsorption efficiency onto banana peels powder was investigated. The agroindustrial waste recovery represents one of the Circular Economy pillars. In the view of the synthesis of an environmentally friendly adsorbent material, the powder was used without any preliminary chemical or thermal activation, but only after simple washing, drying and grinding. The bio-adsorbent was characterized by the FTIR technique and tested in batch mode on synthetic aqueous solutions containing Pb and Cu in the range 10–90 mg·L^(-1). A selection of two(Langmuir, Freundlich) and three(Sips, Redlich–Peterson, Koble–Corrigan) parameter isotherm models was chosen to fit adsorption equilibrium data by non-linear regression procedure. The best fit isotherm model was selected relying on the error function with the lowest average percentage error(APE) value, among those characterized by the highest R^2 values. As expected, the three-parameter models are found to better represent both metals bio-adsorption, with APE and R^2 values always lower and higher, respectively, than the corresponding values obtained for the two-parameter models.