基于NUMECA FINE/Turbo的并行计算测试

为具体了解CFD软件NUMECA FINE/Turbo的并行计算性能,良好把握后续的科研工作进度,分别研究在激活超线程情况下单节点计算与多节点并行计算以及CPU在激活超线程前、后计算速度的差异.结果表明:在多节点并行计算时,计算速度与实际参加并行计算的CPU物理核心数量成正比;在激活超线程的情况下,并行计算节点数在超过实际物理核心数后明显降低计算速度的提升.

基于FINE/Turbo软件的螺旋桨数值计算方法研究

采用缠绕的方式进行螺旋桨的三维建模,相比较传统的坐标转换方式,其符合螺旋桨叶面成型的原理,建模精度较高。利用FINE/Turbo软件对螺旋桨的三维模型构建全六面体多块结构化网格,采用多重网格数值计算方法,显著提高了计算收敛速度。计算获取了螺旋桨的敞水性征曲线,并与实验值进行对比,其结果表明,基于FINE/Turbo软件的螺旋桨数值计算方法预报值和实验数据吻合良好,具有工程实用价值。分析螺旋桨桨叶的静压分布和流场信息,为后续相关研究提供理论指导和技术支持。

基于FINE/Turbo的高压涡轮叶片流热耦合分析

为验证FINE/Turbo软件对高压涡轮流热耦合求解问题的准确性,将Mark II型燃气涡轮叶片作为分析对象,选用不同的湍流模型和转捩模型进行数值模拟,得到叶片表面压力分布,B2B面的压力、温度、马赫数和湍流动能分布,叶片内部温度分布以及叶片表面传热系数分布,并与试验数据进行比较.结果表明:对于流热耦合问题,FINE/Turbo软件可得到准确的求解结果;转捩问题对叶片表面温度和导热系数的计算精度影响很大;湍流模型的选择对叶片表面压力分布影响很小,对温度和导热系数分布影响很大.

第3代双源CT-Turbo-Flash扫描模式下高心率CCTA成像可行性分析

目的:探讨分析第3代西门子CT Turbo Flash扫描模式下行高心率冠状动脉CT血管成像(CCTA)检查的可行性。方法:选取2022年4月—2023年5月于扬州大学附属医院行CCTA检查80例患者为研究对象,采用随机数表法分为A、B两组,每组40例。A组采用第3代双源CT前瞻性心电门控Turbo Flash模式扫描,B组采用第3代双源CT行回顾性心电门控模式扫描,评估两组图像主动脉根部(AR)、左冠状动脉主干(LM)、右冠状动脉(RCA)CT值、图像信噪比(SNR)、图像对比噪声比(CNR),以及CT图像质量主观评分与有效辐射剂量(ED)。结果:两组AR、LM、RCA图像的CT值、SNR和CNR以及LAD图像的CT值比较,差异均无统计学意义(P>0.05),而LAD图像的SNR、CNR比较差异有统计学意义(P<0.05)。B组ED高于A组,差异有统计学意义(P<0.001)。两组图像质量主观评分比较,差异有统计学意义(P>0.05)。结论:高心率患者于Turbo Flash扫描模式下行CCTA检查的图像质量基本可用于冠状动脉评价,且辐射剂量较低。

Structural properties of residual carbon in coal gasification fine slag and their influence on flotation separation and resource utilization:A review

Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental benefits.The structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of FS-RC.In this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle size.The reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is summarized.Separation methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the future.The design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the future.The high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization method.This review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the efficient flotation separation of FS,and the expansion of the field of the high value-added utilization of FS-RC.

Influence of topography on the fine structures of stratospheric gravity waves:An analysis using COSMIC-2 temperature data

We derive the potential energy of gravity waves(GWs)in the upper troposphere and stratosphere at 45°S-45°N from December 2019 to November 2022 by using temperature profiles retrieved from the Constellation Observing System for Meteorology,Ionosphere,and Climate-2(COSMIC-2)satellite.Owing to the dense sampling of COSMIC-2,in addition to the strong peaks of gravity wave potential energy(GWPE)above the Andes and Tibetan Plateau,we found weak peaks above the Rocky,Atlas,Caucasus,and Tianshan Mountains.The land-sea contrast is responsible for the longitudinal variations of the GWPE in the lower and upper stratosphere.At 40°N/S,the peaks were mainly above the topographic regions during the winter.At 20°N/S,the peaks were a slight distance away from the topographic regions and might be the combined effect of nontopographic GWs and mountain waves.Near the Equator,the peaks were mainly above the regions with the lowest sea level altitude and may have resulted from convection.Our results indicate that even above the local regions with lower sea level altitudes compared with the Andes and Tibetan Plateau,the GWPE also exhibits fine structures in geographic distributions.We found that dissipation layers above the tropopause jet provide the body force to generate secondary waves in the upper stratosphere,especially during the winter months of each hemisphere and at latitudes of greater than 20°N/S.

Multiscale analysis of fine slag from pulverized coal gasification in entrained-flow bed

Fine slag(FS)is an unavoidable by-product of coal gasification.FS,which is a simple heap of solid waste left in the open air,easily causes environmental pollution and has a low resource utilization rate,thereby restricting the development of energy-saving coal gasification technologies.The multiscale analysis of FS performed in this study indicates typical grain size distribution,composition,crystalline structure,and chemical bonding characteristics.The FS primarily contained inorganic and carbon components(dry bases)and exhibited a"three-peak distribution"of the grain size and regular spheroidal as well as irregular shapes.The irregular particles were mainly adsorbed onto the structure and had a dense distribution and multiple pores and folds.The carbon constituents were primarily amorphous in structure,with a certain degree of order and active sites.C 1s XPS spectrum indicated the presence of C–C and C–H bonds and numerous aromatic structures.The inorganic components,constituting 90%of the total sample,were primarily silicon,aluminum,iron,and calcium.The inorganic components contained Si–O-Si,Si–O–Al,Si–O,SO_(4)^(2−),and Fe–O bonds.Fe 2p XPS spectrum could be deconvoluted into Fe 2p_(1/2) and Fe 2p_(3/2) peaks and satellite peaks,while Fe existed mainly in the form of Fe(III).The findings of this study will be beneficial in resource utilization and formation mechanism of fine slag in future.

一种MFSK信号的软解调Turbo译码算法

为了提高短波通信中多进制频移键控(Multiple Frequency Shift Keying,MFSK)信号的传输性能,提出了一种适用于MFSK信号的软解调Turbo译码算法。利用快速傅里叶变换(Fast Fourier Transform,FFT)计算MFSK调制频率对应的信号幅值,并结合增强型Turbo码结构,编码时将MFSK信号调制频率与Turbo编码状态形成映射关系,译码时利用软解调信号幅值直接计算对数分支度量,减少了比特似然信息计算的误差。仿真结果表明,相比于常规软比特解调译码算法,所提算法提高了MFSK信号软解调Turbo译码算法的误比特率(Bit Error Rate,BER)性能。

Parallel Implementation of the CCSDS Turbo Decoder on GPU

This paper presents a software turbo decoder on graphics processing units(GPU).Unlike previous works,the proposed decoding architecture for turbo codes mainly focuses on the Consultative Committee for Space Data Systems(CCSDS)standard.However,the information frame lengths of the CCSDS turbo codes are not suitable for flexible sub-frame parallelism design.To mitigate this issue,we propose a padding method that inserts several bits before the information frame header.To obtain low-latency performance and high resource utilization,two-level intra-frame parallelisms and an efficient data structure are considered.The presented Max-Log-Map decoder can be adopted to decode the Long Term Evolution(LTE)turbo codes with only small modifications.The proposed CCSDS turbo decoder at 10 iterations on NVIDIA RTX3070 achieves about 150 Mbps and 50Mbps throughputs for the code rates 1/6 and 1/2,respectively.

Fine mapping of the powdery mildew resistance gene PmXQ-0508 in bread wheat

In a wheat breeding line XQ-0508 showing consistent resistance to powdery mildew disease,a recessive gene,designated PmXQ-0508,was identified and mapped to a distal region on chromosome arm 2BS.Of three resistance-associated genes in this region,one encoding a protein kinase was selected as the primary candidate for PmXQ-0508.Ten closely linked DNA markers developed in the study could be used for marker-assisted selection for powdery-mildew resistance in breeding programs.

Evolution history dominantly regulates fine root lifespan in tree species across the world

Understanding the drivers of variations in fine root lifespan is key to informing nutrient cycling and productivity in terrestrial ecosystems.However,the general patterns and determinants of forest fine root lifespan at the global scale are still limited.We compiled a dataset of 421 fine root lifespan observations from 76 tree species globally to assess phylogenetic signals among species,explored relationships between fine root lifespan and biotic and abiotic factors,and quantified the relative importance of phylogeny,root system structure and functions,climatic and edaphic factors in driving global fine root lifespan variations.Overall,fine root lifespan showed a clear phylogenetic signal,with gymnosperms having a longer fine root lifespan than angiosperms.Fine root lifespan was longer for evergreens than deciduous trees.Ectomycorrhizal(ECM)plants had an extended fine root lifespan than arbuscular mycorrhizal(AM)plants.Among different climatic zones,fine root lifespan was the longest in the boreal zone,while it did not vary between the temperate and tropical zone.Fine root lifespan increased with soil depth and root order.Furthermore,the analysis of relative importance indicated that phylogeny was the strongest driver influencing the variation in forest fine root lifespan,followed by soil clay content,root order,mean annual temperature,and soil depth,while other environmental factors and root traits exerted weaker effects.Our results suggest that the global pattern of fine root lifespan in forests is shaped by the interplay of phylogeny,root traits and environmental factors.These findings necessitate accurate representations of tree evolutionary history in earth system models to predict fine root longevity and its responses to global changes.

Fine mapping of two recessive genes TaFLA1 and TaSPL8 controlling flag leaf angle in bread wheat

Flag leaf angle is one of the key target traits in high yield wheat breeding.A smaller flag leaf angle reduces shading and enables plants to grow at a higher density,which increases yield.Here we identified a mutant,je0407,with an 84.34%-89.35%smaller flag leaf angle compared with the wild type.The mutant also had an abnormal lamina joint and no ligule or auricle.Genetic analysis indicated that the ligule was controlled by two recessive genes,which were mapped to chromosomes 2AS and 2DL.The mutant allele on chromosome 2AS was named Tafla1b,and it was fine mapped to a 1 Mb physical interval.The mutant allele on chr.2DL was identified as Taspl8b,a novel allele of TaSPL8 with a missense mutation in the second exon,which was used to develop a cleaved amplified polymorphic sequence marker.F3 and F4 lines derived from crosses between Jing411 and je0407 were genotyped to investigate interactions between the Tafla1b and Taspl8b alleles.Plants with the Tafla1b/Taspl8a genotype had 58.41%-82.76%smaller flag leaf angles,6.4%-24.9%shorter spikes,and a greater spikelet density(0.382 more spikelets per cm)compared with the wild type.Plants with the Tafla1a/Taspl8b genotype had 52.62%-82.24%smaller flag leaf angles and no differences in plant height or spikelet density compared with the wild type.Tafla1b/Taspl8b plants produced erect leaves with an abnormal lamina joint.The two alleles had dosage effects on ligule formation and flag leaf angle,but no significant effect on thousand-grain weight.The mutant alleles provide novel resources for improvement of wheat plant architecture.

Changes on Stroke Burden Attributable to Ambient Fine Particulate Matter in China

Objective In recent decades,China has implemented a series of policies to address air pollution.We aimed to assess the health effects of these policies on stroke burden attributable to ambient fine particulate matter(PM_(2.5)).Methods Joinpoint regression was applied to explore the temporal tendency of stroke burden based on data from the Global Burden of Disease 2019 study.Results The age-standardized rates of disability-adjusted life year(DALY)for stroke attributable to ambient PM2.5 in China,increased dramatically during 1990-2012,subsequently decreased at an annual percentage change(APC)of-1.98[95% confidence interval(CI):-2.26,-1.71]during 2012-2019.For ischemic stroke(IS),the age-standardized DALY rates doubled from 1990 to 2014,and decreased at an APC of-0.83(95%CI:-1.33,-0.33)during 2014-2019.Intracerebral hemorrhage(ICH)showed a substantial increase in age-standardized DALY rates from 1990 to 2003,followed by declining trends,with APCs of-1.46(95%CI:-2.74,-0.16)during 2003-2007 and-3.33(95%CI:-3.61,-3.06)during 2011-2019,respectively.Conversely,the age-standardized DALY rates for subarachnoid hemorrhage(SAH)generally declined during 1990-2019.Conclusion Our results clarified the dynamic changes of the ambient PM_(2.5)-attributable stroke burden in China during 1990-2019,highlighting the health effects of air quality improvement policies.

Effective separation of coal gasification fine slag: Role of classification and ultrasonication in enhancing flotation

Effective separation of residual carbon and ash is the basis for the resource utilization of coal gasification fine slag(CGFS).The conventional flotation process of CGFS has the bottlenecks of low carbon recovery and high collector dosage.In order to address these issues,CGFS sample taken from Shaanxi,China was used as the study object in this paper.A new process of size classification-fine grain ultrasonic pretreatment flotation(SC-FGUF)was proposed and its separation effect was compared with that of wholegrain flotation(WGF)as well as size classification-fine grain flotation(SC-FGF).The mechanism of its enhanced separation effect was revealed through flotation kinetic fitting,flotation flow foam layer stability,particle size composition,surface morphology,pore structure,and surface chemical property analysis.The results showed that compared with WGF,pre-classification could reduce the collector dosage by 84.09%and the combination of pre-classification and ultrasonic pretreatment could increase the combustible recovery by 17.29%and up to 93.46%.The SC-FGUF process allows the ineffective adsorption of coarse residual carbon to collector during flotation stage to be reduced by pre-classification,and the tightly embedded state of fine CGFS particles is disrupted and surface oxidizing functional group occupancy was reduced by ultrasonic pretreatment,thus carbon and ash is easier to be separated in the flotation process.In addition,some of the residual carbon particles were broken down to smaller sizes in the ultrasonic pretreatment,which led to an increase in the stability of flotation flow foam layer and a decrease in the probability of detachment of residual carbon particles from the bubbles.Therefore,SCFGUF could increase the residual carbon recovery and reduce the flotation collector dosage,which is an innovative method for carbon-ash separation of CGFS with good application prospect.

Fine mapping and cloning of the sterility gene Bra2Ms in nonheading Chinese cabbage(Brassica rapa ssp.chinensis)

The application of a male-sterile line is an ideal approach for hybrid seed production in non-heading Chinese cabbage(Brassica rapa ssp.chinensis).However,the molecular mechanisms underlying male sterility in B.rapa are still largely unclear.We previously obtained the natural male sterile line WS24-3 of non-heading Chinese cabbage and located the male sterile locus,Bra2Ms,on the A2 chromosome.Cytological observations revealed that the male sterility of WS24-3 resulted from disruption of the meiosis process during pollen formation.Fine mapping of Bra2Ms delimited the locus within a physical distance of about 129 kb on the A2 chromosome of B.rapa.The Bra039753 gene encodes a plant homeodomain(PHD)-finger protein and is considered a potential candidate gene for Bra2Ms.Bra039753 was significantly downregulated in sterile line WS24-3 compared to the fertile line at the meiotic anther stage.Sequence analysis of Bra039753 identified a 369 bp fragment insertion in the first exon in male sterile plants,which led to an amino acid insertion in the Bra039753 protein.In addition,the 369 bp fragment insertion was found to cosegregate with the male sterility trait.This study identified a novel locus related to male sterility in non-heading Chinese cabbage,and the molecular marker obtained in this study will be beneficial for the marker-assisted selection of excellent sterile lines in non-heading Chinese cabbage and other Brassica crops.

Repair of Second-Generation Recycled Fine Aggregate of Waste Concrete from Freeze-Thaw Environment by Carbonation Treatment

The reuse of waste recycled concrete from harsh environments has become a research hotspot in the field of construction.This study investigated the repair effect of carbonation treatment on second-generation recycled fine aggregate(SRFA)obtained from recycled fine aggregate concrete(RFAC)subjected to freeze-thaw(FT)cycles.Before and after carbonation,the properties of SRFA were evaluated.Carbonated second-generation recycled fine aggregate(CSRFA)at five substitution rates(0%,25%,50%,75%,100%)to replace SRFA was used to prepare carbonated second-generation recycled fine aggregate concrete(CSRFAC).The water absorption,porosity and mechanical properties of CSRFAC were tested,and its frost-resisting durability was evaluated.The results showed after carbonation treatment,the physical properties of SRFA was improved and met the requirements of II aggregate.The micro-hardness of the interfacial transition zone and attached mortar in CSRFA was 50.5%and 31.2%higher than that in SRFA,respectively.With the increase of CSRFA replacement rate,the water absorption and porosity of CSRFAC gradually decreased,and the mechanical properties and frost resistance of CSRFAC were gradually improved.Carbonation treatment effectively repairs the damage of SRFA caused by FT cycles and improves its application potential.

Influence of Recycled Concrete Fine Powder on Durability of Cement Mortar

In this paper,the durability of cement mortar prepared with a recycled-concrete fine powder(RFP)was examined;including the analysis of a variety of aspects,such as the carbonization,sulfate attack and chloride ion erosion resistance.The results indicate that the influence of RFP on these three aspects is different.The carbonization depth after 30 days and the chloride diffusion coefficient of mortar containing 10%RFP decreased by 13.3%and 28.19%.With a further increase in the RFP content,interconnected pores formed between the RFP particles,leading to an acceleration of the penetration rate of CO_(2)and Cl^(−).When the RFP content was less than 50%,the corrosion resistance coefficient of the compressive strength of the mortar was 0.84-1.05 after 90 days of sulfate attack.But the expansion and cracking of the mortar was effectively alleviated due to decrease of the gypsum production.Scanning electron microscope(SEM)analysis has confirmed that 10%RFP contributes to the formation of a dense microstructure in the cement mortar.

Quick-scanning X-ray absorption fine structure beamline at SSRF

The layout and characteristics of the hard X-ray spectroscopy beamline(BL11B)at the Shanghai synchrotron radiation facility are described herein.BL11B is a bending-magnet beamline dedicated to conventional and millisecond-scale quick-scanning X-ray absorption fine structures.It is equipped with a cylindrical collimating mirror,a double-crystal monochromator comprising Si(111)and Si(311),a channel-cut quick-scanning Si(111)monochromator,a toroidal focusing mirror,and a high harmonics rejection mirror.It can provide 5-30 keV of X-rays with a photon flux of~5×10^(11)photons/s and an energy resolution of~1.31×10^(-4)at 10 keV.The performance of the beamline can satisfy the demands of users in the fields of catalysis,materials,and environmental science.This paper presents an overview of the beamline design and a detailed description of its performance and capabilities.

Micro-Locational Fine Dust Prediction Utilizing Machine Learning and Deep Learning Models

Given the increasing number of countries reporting degraded air quality,effective air quality monitoring has become a critical issue in today’s world.However,the current air quality observatory systems are often prohibitively expensive,resulting in a lack of observatories in many regions within a country.Consequently,a significant problem arises where not every region receives the same level of air quality information.This disparity occurs because some locations have to rely on information from observatories located far away from their regions,even if they may be the closest available options.To address this challenge,a novel approach that leverages machine learning and deep learning techniques to forecast fine dust concentrations was proposed.Specifically,continuous location features in the form of latitude and longitude values were incorporated into our models.By utilizing a comprehensive dataset comprising weather conditions,air quality measurements,and location properties,various machine learning models,including Random Forest Regression,XGBoost Regression,AdaBoost Regression,and a deep learning model known as Long Short-Term Memory(LSTM)were trained.Our experimental results demonstrated that the LSTM model outperforms the other models,achieving the best score with a root mean squared error of 23.48 in predicting fine dust(PM10)concentrations on an hourly basis.Furthermore,the fact that incorporating location properties,such as longitude and latitude values,enhances the overall quality of the regression models was discovered.Additionally,the implications and contributions of our research were discussed.By implementing our approach,the cost associated with relying solely on existing observatories can be substantially reduced.This reduction in costs can pave the way for economically efficient fine dust observation systems,ensuring more widespread and accurate air quality monitoring across different regions.

When Design Defines a City

Both Spain and China’s practices in urban design show how urban governance,local social development,and people’s needs shape a city’s landscape.IN the 20th century,China and Spain faced the common challenge of urban transition.In China,it began with the urbanization and revitalization process with the inception of the reform and opening-up in 1978,and in Spain.