SSOP基因分型对HLA-AB血清学纯合型结果的校证

目的 建立快速、准确的人类白细胞抗原 (HLA)基因分型技术 ,解决血清学分型局限性。方法 选择HLA -A、B血清学分型纯合型标本 ,应用聚合酶链式反应 -序列特异性寡核苷酸探针杂交 (PCR -SSOP)技术进行基因分型。结果 4 2例HLA -A、4 5例HLA -B血清学纯合型标本 ,经SSOP基因分型 ,其中分别有 3例和 8例为杂合型。结论 SSOP基因分型具有特异性更强、灵敏度更高、结果更为准确可靠等优点 ,是取代传统血清学分型方法较为优越的技术之一。

DEAE-Sepharose Fast Flow分离纯化刺芹侧耳木质素降解酶

[目的]为Pleurotus eryngii—Co60-7木质素降解酶的分离纯化和综合利用提供试验依据。[方法]采用DEAE—Sepharose^TM Fast Flow离子交换介质，分别考察缓冲液pH值、流速和洗脱方式等对刺芹侧耳木质素降解酶分离纯化的影响，确定了最佳分离纯化层析条件。[结果]DEAE-Sephalose^TM Fast Flow分离纯化Pleurotus eryngii-Co60-7木质素降解酶的最佳层析条件为：选择20mmol／L，pH值为5．0醋酸钠一醋酸缓冲体系，3ml／min的流速，进行分步洗脱（100、200～300和1000mmoL／L NaCl的三步洗脱），可较好地实现刺芹侧耳发酵液木质素降解酶初分，该纯化操作目标蛋白回收率达85％，纯化分离因素为2．71。[结论]该技术在分离纯化刺芹侧耳木质素降解酶上可行，具有潜在的工业应用价值。

FLOW800技术在STA-MCA分流术治疗烟雾病效果评估中的作用

目的探讨FLOW800技术在判断烟雾病颞浅动脉(STA)-大脑中动脉(MCA)分流术中血管吻合口通畅度及在手术治疗效果评估中的作用。方法回顾性分析2017年4月至2018年11月接STA-MCA分流术治疗的33例烟雾病的临床资料,手术前后应用FLOW800技术评估血管吻合口通畅情况及手术区域灌注改善情况。使用FLOW800软件对感兴趣区(ROI)进行分析,得到时间-荧光强度曲线,其中造影剂由动脉经循环后流至静脉的时间称为局部循环时间(MVTT),手术前后MVTT差值定义为ΔMVTT。结果33例均手术顺利,术中FLOW800分析均显示吻合口通畅。1因吻合口出现未行血管检查,其余32例吻合血管均通畅。术后11例发生并发症,其中低改善组6例(ΔMVTT<3 s),过改善组5例(ΔMVTT>3 s)。过改善组术前MVTT、ΔMVTT明显高于无并发症组和低改善组(P<0.05),而后两组均统计学差异(P>0.05)。受试者工作特征曲线分析结果显示ΔMVTT判断无并发症与低改善的最佳临界时间为1.635 s,敏感度和特异度分别为0.667和0.682;ΔMVTT判断无并发症与过改善的最佳临界时间为3.525 s,敏感度和特异度为别为1.000和0.727。结论FLOW800技术可准确评价烟雾病STA-MCA分流术中吻合口通畅程度,并在术后并发症的预测中起到一定的作用。

Pore-scale study of the pressure-sensitive effect of sandstone and its influence on multiphase flows

The pressure-sensitive effect on the pore structure of sandstone was investigated using X-ray computed micro-tomography and QEMSCAN quantitative mineral analysis. In a physical simulation study, we extracted the pore network model from digital cores at different confining pressures and evaluated the effect of pressure sensitivity on the multiphase displacement process. In both the pore network model and QEMSCAN scanning, the pore structure was observed to be damaged under a high confining pressure. Due to their different scales, the pores and throats exhibited inhomogeneous changes; further, the throats exhibited a significant variation compared to that exhibited by the pores. Meanwhile, the heterogeneity of the pore structure under the two aforementioned activities was aggravated by the elastic-plastic deformation of the pore structure.The pressure-sensitive effect increased the proportion of mineral particles, such as quartz(the main component of the core skeleton), and reduced the proportion of clay minerals. The clay minerals were originally attached to the pore walls or interspersed in the pores; however, as the pressure increased, the clay minerals accumulated in the pores resulting in blockage of the pores. While simulating the multiphase displacement process, increasing the confining pressure was observed to severely restrict the flowability of oil and water. This study promises to improve the efficiency of reservoir development in terms of oil and gas exploitation.

Impact of time lags on diurnal estimates of canopy transpiration and canopy conductance from sap-flow measurements of Populus cathayana in the Qinghai–Tibetan Plateau

Recently, canopy transpiration （Ec） has been often estimated by xylem sap-flow measurements. However, there is a significant time lag between sap flow measured at the base of the stem and canopy transpiration due to the capacitive exchange between the transpiration stream and stem water storage. Significant errors will be introduced in canopy conductance （gc） and canopy transpiration estimation if the time lag is neglected. In this study, a cross-correlation analysis was used to quantify the time lag, and the sap flowbased transpiration was measured to pararneterize Jarvistype models of gc and thus to simulate Ec of Populus cathayana using the Penman-Monteith equation. The results indicate that solar radiation （Rs） and vapor pressure deficit （VPD） are not fully coincident with sap flow and have an obvious lag effect; the sap flow lags behind Rs and precedes VPD, and there is a 1-h time shift between Eo and sap flow in the 30-min interval data set. A parameterized Jarvis-type gc model is suitable to predict P. cathayana transpiration and explains more than 80% of the variation observed in go, and the relative error was less than 25%, which shows a preferable simulation effect. The root mean square error （RMSEs） between the predicted and measured Ec were 1.91×10^-3 （with the time lag） and 3.12×10^-3cm h^-1 （without the time lag）. More importantly, Ec simulation precision that incorporates time lag is improved by 6% compared to the results without the time lag, with the mean relative error （MRE） of only 8.32% and the mean absolute error （MAE） of 1.48 × 10^-3 cm h^-1.

From molecular dynamics to lattice Boltzmann:a new approach for pore-scale modeling of multi-phase flow

Most current lattice Boltzmann （LBM） models suffer from the deficiency that their parameters have to be obtained by fitting experimental results. In this paper, we propose a new method that integrates the molecular dynamics （MD） simulation and LBM to avoid such defect. The basic idea is to first construct a molecular model based on the actual components of the rock-fluid system, then to compute the interaction force between the rock and the fluid of different densities through the MD simulation. This calculated rock-fluid interaction force, combined with the fluid-fluid force determined from the equation of state, is then used in LBM modeling. Without parameter fitting, this study presents a new systematic approach for pore-scale modeling of multi-phase flow. We have validated this ap- proach by simulating a two-phase separation process and gas-liquid-solid three-phase contact angle. Based on an actual X-ray CT image of a reservoir core, we applied our workflow to calculate the absolute permeability of the core, vapor-liquid H20 relative permeability, and capillary pressure curves.

Prediction of flow stress of Ti-15-3 alloy with artificial neural network

Hot compression experiments were conducted on Ti 15 3 alloy specimens using Gleeble 1500 Thermal Simulator.These tests were focused to obtain the flow stress data under various conditions of strain,strain rate and temperature. On the basis of these data, the predicting model for the nonlinear relation between flow stress and deformation strain,strain rate and temperature for Ti 15 3 alloy was developed with a back propagation artificial neural network method. Results show that the neural network can reproduce the flow stress in the sampled data and predict the nonsampled data well. Thus the neural network method has been verified to be used to tackle hot deformation problems of Ti 15 3 alloy. [

Experimental Study on Momentum Transfer of Surface Texture in Taylor-Couette Flow

The behavior of Taylor-Couette （TC） flow has been extensively studied. However, no suitable torque prediction models exist for high-capacity fluid machinery. The Eckhardt-Grossmann-Lohse （EGL） theory, derived based on the Navier-Stokes equations, is proposed to model torque behavior. This are the significant energy theory suggests that surfaces transfer interfaces between cylinders and annular flow. This study mainly focuses on the effects of surface texture on momentum transfer behavior through global torque measurement. First, a power-law torque behavior model is built to reveal the relationship between dimensionless torque and the Taylor number based on the EGL theory. Second, TC flow appa- ratus is designed and built based on the CNC machine tool to verify the torque behavior model. Third, four surface texture films are tested to check the effects of surface texture on momentum transfer. A stereo microscope and three-dimensional topography instrument are employed to analyze surface morphology. Global torque behavior is measured by rotating a multi component dynamometer, and the effects of surface texture on the annular flow behavior are observed via images obtained using a high-speed camera. Finally, torque behaviors under four differentsurface conditions are fitted and compared. The experi- mental results indicate that surface textures have a remarkable influence on torque behavior, and that the peak roughness of surface texture enhances the momentum transfer by strengthening the fluctuation in the TC flow.

Numerical study on three-dimensional flow field of continuously rotating detonation in a toroidal chamber

Gaseous detonation propagating in a toroidal chamber was numerically studied for hydrogen/oxygen/nitrogen mixtures. The numerical method used is based on the three-dimensional Euler equations with detailed finiterate chemistry. The results show that the calculated streak picture is in qualitative agreement with the picture recorded by a high speed streak camera from published literature. The three-dimensional flow field induced by a continuously rotating detonation was visualized and distinctive features of the rotating detonations were clearly depicted. Owing to the unconfined character of detonation wavelet, a deficit of detonation parameters was observed. Due to the effects of wall geometries, the strength of the outside detonation front is stronger than that of the inside portion. The detonation thus propagates with a constant circular velocity. Numerical simulation also shows three-dimensional rotating detonation structures, which display specific feature of the detonation- shock combined wave. Discrete burning gas pockets are formed due to instability of the discontinuity. It is believed that the present study could give an insight into the interest- ing properties of the continuously rotating detonation, and is thus beneficial to the design of continuous detonation propulsion systems.

Numerical simulation of blood flow and interstitial fluid pressure in solid tumor microcirculation based on tumor-induced angiogenesis

A coupled intravascular-transvascular-interstitial fluid flow model is developed to study the distributions of blood flow and interstitial fluid pressure in solid tumor microcirculation based on a tumor-induced microvascular network. This is generated from a 2D nine-point discrete mathematical model of tumor angiogenesis and contains two parent vessels. Blood flow through the microvascular network and interstitial fluid flow in tumor tissues are performed by the extended Poiseuille＇s law and Darcy＇s law, respectively, transvascular flow is described by Starling＇s law; effects of the vascular permeability and the interstitial hydraulic conductivity are also considered. The simulation results predict the heterogeneous blood supply, interstitial hypertension and low convection on the inside of the tumor, which are consistent with physiological observed facts. These results may provide beneficial information for anti-angiogenesis treatment of tumor and further clinical research.

Video-based measurement and data analysis of traffic flow on urban expressways

A new video-based measurement is proposed to collect and investigate traffic flow parameters. The output of the measurement is velocity-headway distance data pairs. Because density can be directly acquired by the reciprocal of headway distance, the data pairs have the advantage of better simultaneity than those from common detectors. By now, over 33 000 pairs of data have been collected from two road sections in the cities of Shanghai and Zhengzhou. Through analyzing the video files recording traffic movements on urban expressways, the following issues are studied：laws of vehicle velocity changing with headway distance, proportions of di0erent driving behaviors in the traffic system, and characteristics of traffic flow in snowy days. The results show that the real road traffic is very complex, and factors such as location and climate need to be taken into consideration in the formation of traffic flow models.

Measurement and simulation of the two-phase velocity correlation in sudden-expansion gas-particle flows

In this paper the present authors measured the gas-particle two-phase velocity correlation in sudden expansion gas-particle flows with a phase Doppler particle anemometer （PDPA） and simulated the system behavior by using both a Reynolds-averaged Navier-Stokes （RANS） model and a large-eddy simulation （LES）. The results of the measurements yield the axial and radial time-averaged velocities as well as the fluctuation velocities of gas and three particle-size groups （30μm, 50μm, and 95μm） and the gasparticle velocity correlation for 30μm and 50μm particles. From the measurements, theoretical analysis, and simulation, it is found that the two-phase velocity correlation of sudden-expansion flows, like that of jet flows, is less than the gas and particle Reynolds stresses. What distinguishes the two-phase velocity correlations of sudden-expansion flow from those of jet and channel flows is the absence of a clear relationship between the two-phase velocity correlation and particle size in sudden-expansion flows. The measurements, theoretical analysis, and numerical simulation all lead to the above-stated conclusions. Quantitatively, the results of the LES are better than those of the RANS model.

Multi-scale analysis of subgrid stress and energy dissipation in turbulent channel flow

In present study, the subgrid scale （SGS） stress and dissipation for multiscale formulation of large eddy simulation are analyzed using the data of turbulent channel flow at Ret = 180 obtained by direct numerical simulation. It is found that the small scale SGS stress is much smaller than the large scale SGS stress for all the stress components. The dominant contributor to large scale SGS stress is the cross stress between small scale and subgrid scale motions, while the cross stress between large scale and subgrid scale motions make major contributions to small scale SGS stress. The energy transfer from resolved large scales to subgrid scales is mainly caused by SGS Reynolds stress, while that between resolved small scales and subgrid scales are mainly due to the cross stress. The multiscale formulation of SGS models are evaluated a priori, and it is found that the small- small model is superior to other variants in terms of SGS dissipation.

A hybrid vertex-centered finite volume/element method for viscous incompressible flows on non-staggered unstructured meshes

This paper proposes a hybrid vertex-centered fi- nite volume/finite element method for solution of the two di- mensional （2D） incompressible Navier-Stokes equations on unstructured grids. An incremental pressure fractional step method is adopted to handle the velocity-pressure coupling. The velocity and the pressure are collocated at the node of the vertex-centered control volume which is formed by join- ing the centroid of cells sharing the common vertex. For the temporal integration of the momentum equations, an im- plicit second-order scheme is utilized to enhance the com- putational stability and eliminate the time step limit due to the diffusion term. The momentum equations are discretized by the vertex-centered finite volume method （FVM） and the pressure Poisson equation is solved by the Galerkin finite el- ement method （FEM）. The momentum interpolation is used to damp out the spurious pressure wiggles. The test case with analytical solutions demonstrates second-order accuracy of the current hybrid scheme in time and space for both veloc- ity and pressure. The classic test cases, the lid-driven cavity flow, the skew cavity flow and the backward-facing step flow, show that numerical results are in good agreement with the published benchmark solutions.

Experimental and Numerical Study of Dilute Gas-Solid Flow inside a 90°Horizontal Square Pipe Bend

A pneumatic test rig is built to test a curved 90° square bend in an open-circuit horizontal-to-horizontal suction wind tunnel system. Sand particles are used to represent the solid phase with a wide range of particle diameters. Velocity profiles are constructed by measuring the gas velocity using a 3-hole probe. Flow patterns inside the bend duct are introduced using sparks caused by burning sticks of incense with the air flow inside the piping system for flow visualization purpose. Numerical calculations are performed by Lagrangian-particle tracking model for predicting particle trajectories of dispersed phase, and standard k-ε model for predicting the turbulent gas-solid flows in bends. Comparisons made between the theoretical results and experimental data for the velocity vectors and particle trajectories show good agreement.

Steady vortex force theory and slender-wing flow diagnosis

The concept vortex force in aerodynamics is sys- tematically examined based on a new steady vortex-force theory （Wu et al., Vorticity and vortex dynamics, Springer, 2006） which expresses the aerodynamic force （and moment） by the volume and boundary integrals of the Lamb vector. In this paper, the underlying physics of this theory is explored, including the general role of the Lamb vector in non- linear aerodynamics, its initial formation, and its relevance to the total-pressure non-uniformity. As a typical example, the theory is applied to the flow over a slender delta wing at a large angle of attack. The highly localized flow structures with high Lamb-vector peaks are identified in terms of their net contribution to various constituents of the total aerody-namic force. This vortex-force diagnosis sheds new light on the flow control and configuration optimization.

Turbulent Flow Action of Pulp in Wet - Laid Non - Woven Processes

The paper deals with the fluid field of web forming in wet-laid non-woven production.The influence of the turbulent flow on blending fiber and occluded fluid produced in pulp flow has been discussed in theory and practice.The suitable use of the imported velocity of pulp is very important in producing wet-laid products of good quality.

The Application of Air-flow to the Technological Process of Chemical Fiber

The air-flow’s states and ways acted on the technological process of chemical fiber are summed up, which includes chip drying, spinning quenching as well as airjet texturing (air texturing, tangling texturing and bulked continuous filament (BCF)),and the effect of air-flow on the process and quality of chemical fiber is studied,and the action of mechanics and heat on the bulked continuous filament are calculated.

Air-flow Analysis for BCF Texturing Tube

In this paper,the Reynolds number,velocity,pressureand kinetic energy of the BCF processing hot air-floware analyzed with the help of the aero-dynamic theory,and their distributions inside the texturing tube are ob-tained by pressure measuring.

Effects of shear-thinning/thickening nature on the stability of Couette-like flow with uniform crossflow

The linear stability of wall-injected pressure- driven Couette-like flow in power-law fluids is studied. Previous study on this kind of flow for Newtonian fluids by Nicoud and Angilella [Phys. Rev. E 56, 3000 （1997）] was extended to power-law fluids to understand the effects of shear-thinning/thickening nature on the flow stability. A related expression between the critical crossflow Reynolds number for Newtonian fluids and that for power-law fluids is obtained as the streamwise Reynolds number is large enough based on numerical computations, and verified theoretically in the case of a limiting condition with the power-law index.