Numerical and experimental study on the falling film flow characteristics with the effect of co-current gas flow in hydrogen liquefaction process

Liquid hydrogen storage and transportation is an effective method for large-scale transportation and utilization of hydrogen energy. Revealing the flow mechanism of cryogenic working fluid is the key to optimize heat exchanger structure and hydrogen liquefaction process(LH2). The methods of cryogenic visualization experiment, theoretical analysis and numerical simulation are conducted to study the falling film flow characteristics with the effect of co-current gas flow in LH2spiral wound heat exchanger.The results show that the flow rate of mixed refrigerant has a great influence on liquid film spreading process, falling film flow pattern and heat transfer performance. The liquid film of LH2mixed refrigerant with column flow pattern can not uniformly and completely cover the tube wall surface. As liquid flow rate increases, the falling film flow pattern evolves into sheet-column flow and sheet flow, and liquid film completely covers the surface of tube wall. With the increase of shear effect of gas-phase mixed refrigerant in the same direction, the liquid film gradually becomes unstable, and the flow pattern eventually evolves into a mist flow.

A novel solution treatment and aging for powder bed fusion-laser beam Ti-6Al-2Sn-4Zr-6Mo alloy:Microstructural and mechanical characterization

Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam(PBF-LB)technology.This alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applications,given its superior mechanical properties,which are approximately 10%higher in terms of ultimate tensile strength(UTS)and yield strength after appropriate heat treatment.In as-built conditions,the alloy is characterized by the presence of soft orthorhombicα″martensite,necessitating a postprocessing heat treatment to decompose this phase and enhance the mechanical properties of the alloy.Usually,PBFed Ti6246 components undergo an annealing process that transforms theα″martensite into anα-βlamellar microstructure.The primary objective of this research was to develop a solution treatment and aging(STA)heat treatment tailored to the unique microstructure produced by the additive manufacturing process to achieve an ultrafine bilamellar microstructure reinforced by precipitation hardening.This study investigated the effects of various solution temperatures in theα-βfield(ranging from 800 to 875℃),cooling media(air and water),and aging time to determine the optimal heat treatment parameters for achieving the desired bilamellar microstructure.For each heat treatment condition,differentα-βmicrostructures were found,varying in terms of theα/βratio and the size of the primaryα-phase lamellae.Particular attention was given to how these factors were influenced by increases in solution temperature and how microhardness correlated with the percentage of the metastableβphase present after quenching.Tensile tests were performed on samples subjected to the most promising heat treatment parameters.A comparison with literature data revealed that the optimized STA treatment enhanced hardness and UTS by13%and 23%,respectively,compared with those of the annealed alloy.Fracture surface analyses were conducted to investigate fracture mechanisms.

Combined anisotropic and cyclic constitutive model for laser powder bed fusion fabricated aluminum alloy

This study presents new methods to effectively model the anisotropic yielding and hardening behavior of laser powder bed fusion fabricated aluminum alloy under both monotonic and cyclic loading conditions.The proposed model combines the yield surface-interpolation method to accurately describe the anisotropic hardening rates in various directions,with the Chaboche kinematic hardening rule to precisely reflect the cyclic characteristics.For numerical implementation of the combined anisotropic and cyclic constitutive model,a fully implicit stress integration algorithm based on return mapping method is provided.Moreover,the multiple parameters associated with the model are categorized and identified in an uncoupled manner.The isotropic and cyclic hardening parameters are determined by an inverse method,and the stability of the optimization outcomes is validated by applying different starting points for the parameters.Particularly,the back-stress effect on the identification of anisotropic parameters associated with the stress invariant-based Hill48 yield function is considered for the first time.This consideration leads to an improved prediction accuracy compared to the identification of anisotropic parameters without considering back-stress effect.The combined anisotropic and cyclic constitutive model,along with the calibrated parameters,are proven capable of accurately reproducing the intricate deformation behavior of laser powder bed fusion fabricated AlSi10Mg.

Numerical study on dehumidifying process in falling film dehumidifier

A counter flow model of simultaneous heat and mass transfer of a vapor absorption process in a falling film dehumidifier is developed. The governing equations with appropriate boundaries and interfacial conditions describing the dehumidifying process are set up. Calcium chloride is applied as the desiccant. The dehumidifying process between falling liquid desiccant film and process air is analyzed and calculated by the control volume approach. Velocity field, temperature distribution and outlet parameters for both the process air and desiccant solution are obtained. The effects of inlet conditions and vertical wall height on the dehumidification process are also predicted. The results show that the humidity ratio, temperature and mass fraction of salt decrease rapidly at the inlet region but slowly at the outlet region along the vertical wall height. The dehumidification processes can be enhanced by increasing the vertical wall height, desiccant solution flow rates or inlet salt concentration in the desiccant solution, respectively. Similarly, the dehumidification process can be improved by decreasing the inlet humidity ratio or flow rates of the process air. The obtained results can improve the performance of the dehumidifier and provide the theoretical basis for the optimization design, and the ooeration and modulation of the solar liquid desiccant air-conditioning systems.

Falling Tree or Fallen Tree?

《英语辅导报》2000-2001学年度第14期(高二版),7—9单元阶段验收题,笔试部分Ⅱ课本要点A)单项选择题,第9小题: The roof was badlydamaged by a——tree inthe great storm last night. A.fall B.fallen C.fallingD.failed 原参考答案为:B 到底是falling tree还是fallen tree?我们先来分析一下现在分词与过去分词作定语时之语意表达功能: 1.现在分词作定语现在分词作定语从其语意功能看:a)

Residence time distribution of high viscosity fluids falling film flow down outside of industrial-scale vertical wavy wall: Experimental investigation and CFD prediction

The flow behavior of gravity-driven falling film of non-conductive high viscosity polymer fluids on an industrial-scale vertical wavy wall was investigated in terms of film thickness and residence time distribution by numerical simulation and experiment.Falling film flow of high viscosity fluids was found to be steady on a vertical wavy wall in the presence of the large film thickness.The comparison between numerical simulation and experiment for the film thickness both in crest and trough of wavy wall showed good agreement.The simulation results of average residence time of falling film flow with different viscous fluids were also consistent with the experimental results.This work provides the initial insights of how to evaluate and optimize the falling film flow system of polymer fluid.

Penetration Depth of Torpedo Anchor in Two-Layered Cohesive Soil Bed by Free Fall

The penetration depth of torpedo anchor in two-layered soil bed was experimentally investigated. A total of 177 experimental data were obtained in laboratory by varying the undrained shear strength of the two-layered soil and the thickness of the top soil layer. The geometric parameters of the anchor and the soil properties(the liquid limit, plastic limit, specific gravity, undrained shear strength, density, and water content) were measured. Based on the energy analysis and present test data, an empirical formula to predict the penetration depth of torpedo anchor in two-layered soil bed was proposed. The proposed formula was extensively validated by laboratory and field data of previous researchers. The results were in good agreement with those obtained for two-layered and single-layered soil bed.Finally, a sensitivity analysis on the parameters in the formula was performed.

Numerical study on falling film flowing characteristics of R113 inside vertical tube under different structural conditions

To develop an appropriate falling film evaporation device for organic fluid cogeneration, a numerical study on the gas–liquid two-phase counter-current flow characteristics of R113 inside a vertical tube under different structural conditions was conducted using the Fluent software. The effects of the tube length, tube diameter, and annular gap on the falling film flow characteristics were determined, respectively. The results indicated that under a certain spray density, the falling film thickness in the region of the steady section was almost constant with different structural parameters for the tube diameter, tube length, and annular gap. In addition, a smaller tube diameter resulted in a steadier film flow. When the tube diameter decreased to a specific value, the film thickness showed a uniform distribution along the wall surface. This indicated that a best falling tube diameter exists. Meanwhile, the film fluctuation was enhanced with an increase in the tube length. When the tube length was greater than 1.2 m, the falling film splashed and could not completely wet the wall surface. The film fluctuation was enhanced by decreasing the annular gap, and the film could not be formed when the annular gap was smaller than 1.2 mm.

Homing Guidance Law with Falling Angle and Flying Time Control

In this paper,a new homing guidance method is used to control the flying time and falling angle for guided missiles. Through this approach,it finds the approximate solution to the quadratic equation of time-togo,which is used for the formula derivation of the flying time control command. In this guidance law design,the acceleration rate control command is adopted. The guidance law is composed of a PN guidance command and a flying time control command. Firstly,it obtains a desired falling angle with accurate guidance. Secondly,it introduces to satisfy the constraint of flying time. The flying time control requires an assumption on the future evolution of missile,which is called time-to-go. To cope with the time-varying speed of missiles,a method of compensating the estimation of time-to-go is presented. The new guidance law is evaluated by using a simulation of typical terminal guidance for rocket-propelled torpedo. The simulation results show that the guidance achieves excellent control performance and exhibits insensitivity to initial trajectory parameter over a widen flight envelope.

Viscous falling film instability around a vertical moving cylinder

The present work discusses both the linear and nonlinear stability conditions of a viscous falling film down the outer surface of a solid vertical cylinder which moves in the direction of its axis with a constant velocity. After studying the linear conditions, a generalized nonlinear kine- matic model is then derived to present the physical system. Applying the boundary conditions, analytical solutions are obtained using the long-wave perturbation method. In the first step, the normal mode method is used to characterize the linear behaviors. In the second step, the nonlinear film flow model is solved by using the method of multiple scales, to obtain Ginzburg-Landau equation. The influence of some physical parameters is discussed in both linear and nonlinear steps of the problem, and the results are displayed in many plots showing the stability criteria in various param- eter planes.

Co-pyrolysis characteristics of typical components of waste plastics in a falling film pyrolysis reactor

Waste plastics mainly come from MSW and usually exist in the form of mixed plastics. During the co-pyrolysis process of mixed plastics, various plastic components have different physicochemical properties and reaction mechanisms. Considering the high viscosity and low thermal conductivity of molten plastics, a falling film pyrolysis reactor was selected to explore the rapid co-pyrolysis process of typical plastic components(PP, PE and PS).The oil and gas yields and the compositions of pyrolysis products of the three components under different ratios at pyrolysis temperatures were analyzed to explore the co-pyrolysis characteristics of PP, PE, and PS. The study is of great significance to the recycling of waste plastics.

Effects of ABA Content on the Development of Abscission Zone and Berry Falling After Harvesting of Grapes

The commodity price of grape reduces as berry falling after harvest. It is crucial to prevent grape from berry falling during storage. In this article, the structure change of grape cells in the abscission zone was observed, the ABA content and the activities of cellulase and polygalacturonase （PG） were measured, and the relationship of ABA and berry falling was investigated. The results suggest that cells in the abscission zone grow into a separation layer soon after the grapes are cut off. According to the level of development, we designed 6 grades to sort the different development stages. The grade 3 plays an important role in berry falling. ABA enhances the activities of cellulase and polygalacturonase, and accelerates the decomposition of cellulose and pectin, which determines the level of development of abscission zone and berry falling. If ABA ratio is less than 20 ng g-i flesh weight （FW）, the abscission zone is not developed to the grade 3, and the berry falling is effectively stopped. We treated grape bunches with nine plant growth regulators and two chemicals. The results indicated that 2,3,5-triiodobenzoic acid （TIBA） can （a） inhibit the generation of ABA significantly, （b） inactivate the activities of cellulase and PG, （c） delay the development of the grade 3 of abscission zone, and （d） stop berry falling. Indole acetic acid （IAA）, gibberellic acid （GA3）, naphthalene acetic acid （NAA）, 6-benzylaminopurine （6-BA）, calcium chloride （CaCl2）, and potassium permanganate （KMnO4） caused similar results as TIBA. Chlorocholine chloride （CCC）, dimethyl amino succinamic acid （B9）, chloroethylphosphonic acid （CEPA） and exogenous ABA showed opposite effects.

Liquid film falling behaviour on horizontal circular cylinder

The flow pattern behaviour of falling liquid film over three horizontal cylinders was evaluated.These flows can take three forms:discrete droplets,individual jets,and continuous sheet,and special attention is paid to the effects of the physical properties and geometrical parameters of the first two forms(droplets and jets) because these forms are more important in heat-transfer behaviour and less research has been published for these forms,The flow modes and experimental results were successfully compared with previous experimental literatures,and also the effects of liquid flow rate,tube diameter,and tube spacing on departure site spacing,in both drop and jet modes,were evaluated in the low Galileo number and high viscosity fluid(cooking oil),to help developing criteria for determining falling film modes and their transitions,and to understand the heat transfer characteristics associated with each mode.

Effect of the inclined weak interlayers on the rainfall response of a bedded rock slope

Engineering experience shows that outward dipping bedded rock slopes, especially including weak interlayers, are prone to slide under rainfall conditions. To investigate the effect of inclined weak interlayers at various levels of depth below the surface on the variation of displacements and stresses in bedded rock slopes, four geo- mechanical model tests with artificial rainfall have been conducted. Displacements, water content as well as earth pressure in the model were monitored by means of various FBG （Fiber Bragg Grating） sensors. The results showed that the amount of displacement of a slope with a weak interlayer is 2.8 to 6.2 times larger than that of a slope without a weak interlayer during one rainfall event. Furthermore, the position of the weak interlayer in terms of depth below the surface has a significant effect on the zone of deformation in the model. In the slope with a high position weak interlayer, the recorded deformation was larger in the superficial layer of the model and smaller in the frontal portion than in the slope with a low position weak interlayer. The slope with two weak interlayers has the largest deformation at all locations of all test slopes. The slope without a weak interlayer was only saturated in its superficial layer, while the displacement decreased with depth. That was different from all slopes with a weak interlayer in which the largest displacement shifted from the superficial layer to the weak interlayer when rainfall persisted. Plastic deformation of the weak interlayer promoted the formation of cracks which caused more water to flow into the slope, thus causing larger deformation in the slope with weak interlayers. In addition, the slide thrust pressure showed a vibration phenomenon o.5 to 1 hour ahead of an abrupt increase of the deformation, which was interpreted as a predictor for rainfall-induced failure of bedded rock slopes.

Numerical Investigations on Harbor Oscillations Induced by Falling Objects

In this paper,the open-sourced computational fluid dynamics software,OpenFOAM~?,is used to study the fluctuation phenomenon of the water body inside a horizontally one-dimensional enclosed harbor basin with constant water depth triggered by falling wedges with various horizontal falling positions,initial falling velocities and masses.Based on both Fourier transfo rm analysis and wavelet spectrum analysis for the time series of the free surface elevations inside the harbor basin,it is found for the first time that the wedge falling inside the harbor can directly trigger harbor resonance.The influences of the three factors(including the horizontal falling position,the initial falling velocity,and the mass)on the response amplitudes of the lowest three resonant modes are also investigated.The results show that when the wedge falls on one of the nodal points of a resonant mode,the mode would be remarkably suppressed.Conversely,when the wedge falls on one of the anti-nodal points of a resonant mode,the mode would be evidently triggered.The initial falling velocity of the wedge mainly has a remarkable effect on the response amplitude of the most significant mode,and the latter shows a gradual increase trend with the increase of the former.While for the other two less significant modes,their response amplitudes fluctuate around certain constant values as the initial falling velocity rises.In general,the response amplitudes of all the lowest three modes are shown to gradually increase with the mass of the wedge.

Application of Automatic Diagnostic Analysis on Atmospheric Horizontal Inversion Area and Freezing Rain Falling Area

The automatic diagnostic analysis on atmospheric horizontal inversion area is realized through changing the single atmospheric inversion into horizontal one based on the sounding data in Micaps system;the basic conceptual model INCLUDING atmospheric horizontal inversion area,ground 0 ℃ line,high altitude wet area,extreme point 0 ℃ line in inversion layer is buillt after the research on relationship between atmospheric horizontal inversion area and freezing rain falling area;automatic diagnostic analysis on freezing rain falling area is developed based on the conceptual model,the method is in accord well with the actual situation (freezing rain disaster weather occurred in most part of the south in beginning of 2008) and fitting rate reaches 94.4%,quantitative correlation coefficient between the area of freezing rain falling area and stations reporting freezing rain is 0.839.

Simulation of the hydrodynamics and mass transfer in a falling film wavy microchannel

The flow in a liquid falling film is predominantly laminar,and the liquid-side mass transfer is limited by molecular diffusion.The effective way to enhance the mass transfer is to improve the liquid film flow behavior.The falling film behaviors of water,ethanol and ethylene glycol in nine different wavy microchannels were simulated by Computational Fluid Dynamics.The simulation results show that the falling film thickness exhibits a waveform distribution resulting in a resonance phenomenon along the wavy microchannel.The fluctuation of liquid film surface increases the gas-liquid interface area,and the internal eddy flow inside the liquid film also improves the turbulence of liquid film,the gas-liquid mass transfer in falling film microchannels is intensified.Compared with flat microchannel,the CO_(2) absorption efficiency in water in the wavy microchannel is improved over 41%.Prediction models of liquid film amplitude and average liquid film thickness were established respectively.

Separation and Purification of Dodecanedioic Acid from Its Homologous Compounds by Falling Film Crystallization

Separation and purification of dodecanedioic acid (DDDA) from its homologous compounds were studied experimentally by falling film crystallization (FFC). The influences of various operation parameters, including crystallizing time, flow rate of melt and temperature of glycerine bath, on purity of DDDA and crystallizing rate were investigated. Over 99% (by mole) DDDA was obtained for a feed composition of 96% (by mole). The main factors affecting the separation efficiency are flow rate of melt and temperature of glycerine bath. The crystallizing layer of DDDA was further purified by sweating and blasting. A set of optimized operation data are provided for better understanding the mechanism of heat and mass transfer in FFC, and for further industrial application of DDDA purification process.

Study on heat transfer for falling liquid film flow with consideration of interfacial evaporation

The interfacial evaporative heat transfer was included in the semi-empirical study of the heat transfer for the falling liquid film flow. The investigations showed that, the inclusion of the interfacial eveiporative heat transfer in the turbulent model would lower the predicted convective heat transfer coefficient. Predictions of the new model resulted in a prominent deviation from that predictions of the normal model in the case of large mass flow rate and low wall heat flux. This deviation will be decreased with increasing wall heat flux, such that it will be asymptotic zero at very high wall heat flux. Predictions of the new model agreed well with the current experimental measurements. This study has verified that the Reynolds number is not the sole crucial parameter for heat transfer of falling liquid film flow, and wall heat flux will be another important independent parameter. This result is consistent with our previous studies.

Numerical simulation of a falling droplet surrounding by air under electric field using VOF method:A CFD study

This is a numerical study of a falling droplet surrounding by air under the electric field modeled with finite volume method by means of CFD.The VOF method has been employed to model the two-phase flow of the present study.Various capillary numbers are investigated to analyze the effects of electric field intensity on the falling droplet deformation.Also,the effects of electric potential on the heat transfer coefficient have been examined.The obtained results showed that by applying the electric field at a capillary number of 0.2 the droplet tends to retain its primitive shape as time goes by,with a subtle deformation to an oblate form.Intensifying the electric field to a capillary number of 0.8 droplet deformation is almost insignificantwith time progressing;however,further enhancement in capillary number to 2 causes the droplet to deform as a prolate shape and higher values of this number intensify the prolate form deformation of the droplet and result in pinch-off phenomenon.Ultimately,it is showed that as the electric potential augments the heat transfer coefficient increases in which for electric potential values higher than 2400 V the heat transfer coefficient enhances significantly.