To effectively solve the agglomeration problems in the solid state reaction process,pre-adding glucose is adopted to the synthesis of Li Fe PO4/C energy materials using Fe–P waste slag. The average particle grain siz...To effectively solve the agglomeration problems in the solid state reaction process,pre-adding glucose is adopted to the synthesis of Li Fe PO4/C energy materials using Fe–P waste slag. The average particle grain size of Li FeP O4/C decreases,and the impurities in Li Fe PO4/C composites reduce to a great extent. It makes great sense to the mass industrial production. The optimum synthesis conditions determined in this work are based on the orthogonal experiments. The samples synthesized in a scale of 500 g exhibit high purity,excellent electrochemical performance,high reaction activity,good reversibility,and low polarization level.The discharge capacities are 145,134,117,and 102 m Ah/g at the current densities of 0.1 C,0.2 C,0.5 C and1 C,respectively. This work puts forward a practical suggestion for mass producing environmental benign and low cost Li FeP O4/C as cathode materials of lithium ion batteries.展开更多
A new, simple and fast separation method for Fe using an extraction chromatographic resin, Aliquat 336 (commercially available as TEVA resin) has been developed. A one milliliter column containing 0.33 mL TEVA resin o...A new, simple and fast separation method for Fe using an extraction chromatographic resin, Aliquat 336 (commercially available as TEVA resin) has been developed. A one milliliter column containing 0.33 mL TEVA resin on 0.67 mL CG-71C was used.Iron was adsorbed with 6mol·L-1 HCl + H2O2 on TEVA resin, and recovered with 2 mol·L-1HNO3. The recovery yield and total blank were 93.5 ± 6.5% and 6 ng, respectively. Theseparation method is simple, and takes < 2 hours. For evaluation of the Fe separation, Fe isotope ratios were measured by a double-spike method employing multicollector inductively coupled plasma source mass spectrometry (MC-ICP-MS) with repeatability of 0.06‰ (SD) for the standard solution and ~0.05‰ for the silicate samples. Therefore, the column chemistry developed in this study is a viable option for Fe isotope ratio measurement by MC-ICP-MS.展开更多
The irfluences of C/S mass ratio and kieserite im-pregnation on performance of 95-grade magnesia bricks prepared using sintered magnesia DBM95 as main start-ing material, silica fi, me and limestone as additives were ...The irfluences of C/S mass ratio and kieserite im-pregnation on performance of 95-grade magnesia bricks prepared using sintered magnesia DBM95 as main start-ing material, silica fi, me and limestone as additives were researched. The cold and hot physical properties were tested according to Chinese standards on refractories. The hydration resistance was determined in a high pres-sure autoclave with 0. 55 MPa of water vapor pressure for different holding times of 0. 5 h, 3 h, and 5 h. The tri-al results show （ 1 ） adding silica fume to decrease C/S ratio from 0. 84 to 0. 33 improves sintering property; addin,g limestone to increase C/S ratio J？om 0. 84 to 1.95 causes more pores and negatively influences physi-cal properties： BD decreases, AP increases, MOR and CCS decrease generally, but HMOR increases obviously; （2） for non-impregnated specimens, adjusting C/S mass ratio can not improve hydration resistance; （3） the impregnation with kieserite solution can improve hydra-tion resistance of magnesia bricks significantly.展开更多
The competition-density (C-D) effects for mean mass for tree, stem, branch and leaf were analyzed in Acacia auriculiformis stands. Mean tree mass-density and mean organ mass-density were well explained by the C-D equa...The competition-density (C-D) effects for mean mass for tree, stem, branch and leaf were analyzed in Acacia auriculiformis stands. Mean tree mass-density and mean organ mass-density were well explained by the C-D equation of tree and the C-D equation of tree organ, respectively. An equation describing the relationship between mean leaf area u and density was formulated that fit the u-data well. The relationship between mean tree mass w and the ratio of each organ to mean tree mass (wo/ w) was examined. With increasing w, the stem mass ratio wS/w increased, whereas the branch mass ratio wB/w and the leaf mass ratio wL/w decreased. The yield difference between the lowest-density stand and the high-density stand became greater with stand growth. However, the yield of the mid-density stand was slightly lower than the yield of the high-density stand during the experimental period. To produce the most desirable combination of demanding individual-tree size and relative high stem yield, the mid-density is recommended as proper planting density for future management of A. auriculiformis stands.展开更多
基金supported by the National Science Foundation of China(grant no.21206099)
文摘To effectively solve the agglomeration problems in the solid state reaction process,pre-adding glucose is adopted to the synthesis of Li Fe PO4/C energy materials using Fe–P waste slag. The average particle grain size of Li FeP O4/C decreases,and the impurities in Li Fe PO4/C composites reduce to a great extent. It makes great sense to the mass industrial production. The optimum synthesis conditions determined in this work are based on the orthogonal experiments. The samples synthesized in a scale of 500 g exhibit high purity,excellent electrochemical performance,high reaction activity,good reversibility,and low polarization level.The discharge capacities are 145,134,117,and 102 m Ah/g at the current densities of 0.1 C,0.2 C,0.5 C and1 C,respectively. This work puts forward a practical suggestion for mass producing environmental benign and low cost Li FeP O4/C as cathode materials of lithium ion batteries.
文摘A new, simple and fast separation method for Fe using an extraction chromatographic resin, Aliquat 336 (commercially available as TEVA resin) has been developed. A one milliliter column containing 0.33 mL TEVA resin on 0.67 mL CG-71C was used.Iron was adsorbed with 6mol·L-1 HCl + H2O2 on TEVA resin, and recovered with 2 mol·L-1HNO3. The recovery yield and total blank were 93.5 ± 6.5% and 6 ng, respectively. Theseparation method is simple, and takes < 2 hours. For evaluation of the Fe separation, Fe isotope ratios were measured by a double-spike method employing multicollector inductively coupled plasma source mass spectrometry (MC-ICP-MS) with repeatability of 0.06‰ (SD) for the standard solution and ~0.05‰ for the silicate samples. Therefore, the column chemistry developed in this study is a viable option for Fe isotope ratio measurement by MC-ICP-MS.
文摘The irfluences of C/S mass ratio and kieserite im-pregnation on performance of 95-grade magnesia bricks prepared using sintered magnesia DBM95 as main start-ing material, silica fi, me and limestone as additives were researched. The cold and hot physical properties were tested according to Chinese standards on refractories. The hydration resistance was determined in a high pres-sure autoclave with 0. 55 MPa of water vapor pressure for different holding times of 0. 5 h, 3 h, and 5 h. The tri-al results show （ 1 ） adding silica fume to decrease C/S ratio from 0. 84 to 0. 33 improves sintering property; addin,g limestone to increase C/S ratio J？om 0. 84 to 1.95 causes more pores and negatively influences physi-cal properties： BD decreases, AP increases, MOR and CCS decrease generally, but HMOR increases obviously; （2） for non-impregnated specimens, adjusting C/S mass ratio can not improve hydration resistance; （3） the impregnation with kieserite solution can improve hydra-tion resistance of magnesia bricks significantly.
基金supported by the Forestry Technology Popularization Demonstration Project of the Central Government of China(No.[2015]GDTK-07)
文摘The competition-density (C-D) effects for mean mass for tree, stem, branch and leaf were analyzed in Acacia auriculiformis stands. Mean tree mass-density and mean organ mass-density were well explained by the C-D equation of tree and the C-D equation of tree organ, respectively. An equation describing the relationship between mean leaf area u and density was formulated that fit the u-data well. The relationship between mean tree mass w and the ratio of each organ to mean tree mass (wo/ w) was examined. With increasing w, the stem mass ratio wS/w increased, whereas the branch mass ratio wB/w and the leaf mass ratio wL/w decreased. The yield difference between the lowest-density stand and the high-density stand became greater with stand growth. However, the yield of the mid-density stand was slightly lower than the yield of the high-density stand during the experimental period. To produce the most desirable combination of demanding individual-tree size and relative high stem yield, the mid-density is recommended as proper planting density for future management of A. auriculiformis stands.
