A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characteriz...A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characterized by using N2 physical adsorption, temperature-programmed reduction/desorption （TPR/TPD） and MSssbauer effect spectroscopy （MES） methods. The characterization results indicated that the BET surface area increases with increasing Al2O3 content and passes through a maximum at the Al2O3/Fe ratio of 10/100 （weight basis）. After the point, it decreases with further increase in Al2O3 content. The incorporation of Al2O3 binder was found to weaken the surface basicity and suppress the reduction and carburization of iron-based catalysts probably due to the strong K-Al2O3 and Fe-Al2O3 interactions. Furthermore, the H2 adsorption ability of the catalysts is enhanced with increasing Al2O3 content. The FTS performances of the catalysts were tested in a slurry-phase continuously stirred tank reactor （CSTR） under the reaction conditions of 260 ℃, 1.5 MPa, 1000 h^-1 and molar ratio of H2/CO 0.67 for 200 h. The results showed that the addition of small amounts of Al2O3 affects the activity of iron-based catalysts to a little extent. However, with further increase of Al2O3 content, the FTS activity and water gas shift reaction （WGS） activity are decreased severely. The addition of appropriate Al2O3 do not affect the product selectivity, but the catalysts incorporated with large amounts of Al2O3 have higher selectivity for light hydrocarbons and lower selectivity for heavy hydrocarbons.展开更多
Fe-based amorphous alloys with ductility were synthesized using the commercial cast iron QT50 (denoted as QT) with the combining minor addition of B and Al by single roller melt-spinning. The melt-spun (QT1-xBx)99Al1 ...Fe-based amorphous alloys with ductility were synthesized using the commercial cast iron QT50 (denoted as QT) with the combining minor addition of B and Al by single roller melt-spinning. The melt-spun (QT1-xBx)99Al1 (x is from 0.006wt% to 0.01wt%) amorphous alloys exhibit onset crystallization temperatures and Curie temperatures of 759-780 and 629-642 K respectively, and whi- ch increase with B content. The amorphous ribbons are ductile and can be bent 180° without breaking. With the increase in B content from 0.006wt% to 0.01wt%, the Vickers microhardness of the amorphous alloys increases from Hv 830 to Hv 1110. The effects of the additional B and Al elements on the glass forming ability and mechanical properties were also discussed.展开更多
Water-logging and the inability to take up sufficient iron (Fe), causing iron deficiency chlorosis (IDC) in soybean (<em>Glycine max</em>, L. Merr.), can be major yield reducing factors in certain soils in...Water-logging and the inability to take up sufficient iron (Fe), causing iron deficiency chlorosis (IDC) in soybean (<em>Glycine max</em>, L. Merr.), can be major yield reducing factors in certain soils in the northern USA and Manitoba, Canada, soybean growing regions. The objective of this research was to evaluate soybean IDC, biomass production, and yield with seeding on raised beds and seed application of the Fe-chelate compound ortho-ortho-Fe-EDDHA. In six environments, soybean were seeded on raised beds and conventionally prepared seedbeds (flat) and with a factorial arrangement of five cultivars (within adapted maturity group 0.1 to 0.9 and variable IDC tolerance) and seed applied Fe-EDDHA using rates of 0 kg<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>ha<sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">−</span></span>1</sup> and 3.36 kg<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>ha<sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">−</span></span>1</sup>. There were no significant interactions between the factors tested. The plant population was 27% higher on the raised beds compared with flat, and yield was 6.3% higher (2893 kg<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>ha<sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">−</span></span>1</sup> vs. 2722 kg<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>ha<sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">−</span></span>1</sup>). Total dry plant biomass on raised beds was 9.8% greater compared with flat. The plant population with seed applied Fe-EDDHA was 10.6% lower compared with no application. However, the IDC score was significantly lower 2.2 vs 2.4 (1 = green, 5 = dead) for Fe-EDDHA seed application. Yield and plant biomass were not significantly different between Fe treatments. Raised beds offer an opportunity for soybean growers to reduce the negative influence of excessive water. Further research is needed to determine the long-term effect of raised beds on plant development, IDC expression, and yield. The application of Fe-EDDHA remains a partial solution and should therefore be combined with other methods to reduce IDC. Further research should study other Fe-EDDHA application rates and methods.展开更多
基金Project(51974048) supported by the National Natural Science Foundation of ChinaProject(CQBX202225) supported by Postdoctoral Innovation Talent Program of Chongqing,ChinaProject(CSTB2023NSCQ-BHX0166) supported by Natural Science Foundation of Chongqing,China。
基金The financial support from the National Natural Science Foundation of China (20590361)the National Outstanding Young Scientists Foundation of China (20625620)
文摘A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characterized by using N2 physical adsorption, temperature-programmed reduction/desorption （TPR/TPD） and MSssbauer effect spectroscopy （MES） methods. The characterization results indicated that the BET surface area increases with increasing Al2O3 content and passes through a maximum at the Al2O3/Fe ratio of 10/100 （weight basis）. After the point, it decreases with further increase in Al2O3 content. The incorporation of Al2O3 binder was found to weaken the surface basicity and suppress the reduction and carburization of iron-based catalysts probably due to the strong K-Al2O3 and Fe-Al2O3 interactions. Furthermore, the H2 adsorption ability of the catalysts is enhanced with increasing Al2O3 content. The FTS performances of the catalysts were tested in a slurry-phase continuously stirred tank reactor （CSTR） under the reaction conditions of 260 ℃, 1.5 MPa, 1000 h^-1 and molar ratio of H2/CO 0.67 for 200 h. The results showed that the addition of small amounts of Al2O3 affects the activity of iron-based catalysts to a little extent. However, with further increase of Al2O3 content, the FTS activity and water gas shift reaction （WGS） activity are decreased severely. The addition of appropriate Al2O3 do not affect the product selectivity, but the catalysts incorporated with large amounts of Al2O3 have higher selectivity for light hydrocarbons and lower selectivity for heavy hydrocarbons.
基金This work was financially supported by the National Natural Science Foundation of China (No.50225103, 50471001 and 50631010).
文摘Fe-based amorphous alloys with ductility were synthesized using the commercial cast iron QT50 (denoted as QT) with the combining minor addition of B and Al by single roller melt-spinning. The melt-spun (QT1-xBx)99Al1 (x is from 0.006wt% to 0.01wt%) amorphous alloys exhibit onset crystallization temperatures and Curie temperatures of 759-780 and 629-642 K respectively, and whi- ch increase with B content. The amorphous ribbons are ductile and can be bent 180° without breaking. With the increase in B content from 0.006wt% to 0.01wt%, the Vickers microhardness of the amorphous alloys increases from Hv 830 to Hv 1110. The effects of the additional B and Al elements on the glass forming ability and mechanical properties were also discussed.
文摘Water-logging and the inability to take up sufficient iron (Fe), causing iron deficiency chlorosis (IDC) in soybean (<em>Glycine max</em>, L. Merr.), can be major yield reducing factors in certain soils in the northern USA and Manitoba, Canada, soybean growing regions. The objective of this research was to evaluate soybean IDC, biomass production, and yield with seeding on raised beds and seed application of the Fe-chelate compound ortho-ortho-Fe-EDDHA. In six environments, soybean were seeded on raised beds and conventionally prepared seedbeds (flat) and with a factorial arrangement of five cultivars (within adapted maturity group 0.1 to 0.9 and variable IDC tolerance) and seed applied Fe-EDDHA using rates of 0 kg<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>ha<sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">−</span></span>1</sup> and 3.36 kg<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>ha<sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">−</span></span>1</sup>. There were no significant interactions between the factors tested. The plant population was 27% higher on the raised beds compared with flat, and yield was 6.3% higher (2893 kg<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>ha<sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">−</span></span>1</sup> vs. 2722 kg<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>ha<sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">−</span></span>1</sup>). Total dry plant biomass on raised beds was 9.8% greater compared with flat. The plant population with seed applied Fe-EDDHA was 10.6% lower compared with no application. However, the IDC score was significantly lower 2.2 vs 2.4 (1 = green, 5 = dead) for Fe-EDDHA seed application. Yield and plant biomass were not significantly different between Fe treatments. Raised beds offer an opportunity for soybean growers to reduce the negative influence of excessive water. Further research is needed to determine the long-term effect of raised beds on plant development, IDC expression, and yield. The application of Fe-EDDHA remains a partial solution and should therefore be combined with other methods to reduce IDC. Further research should study other Fe-EDDHA application rates and methods.
