Novel hollow Fe3O4 nanoparticles for drug delivery were synthesized via a one-step template- free approach. These nanoparticles were obtained by modifing the Fe3O4 nanoparticles with 3-aminopropyltrimethoxy silane, an...Novel hollow Fe3O4 nanoparticles for drug delivery were synthesized via a one-step template- free approach. These nanoparticles were obtained by modifing the Fe3O4 nanoparticles with 3-aminopropyltrimethoxy silane, and then grafting alginate onto the surface of amine magnetic. The hollow structure of Fe3O4 spheres was characterized by TEM, XRD, and XPS. The M-H hysteresis loop indicated that the magnetic spheres exhibit snperparamagnetic characteristics at room temperature. Daunorubicin acting as a model drug was loaded into the carrier, and the maximum percent of envelop and load were 28.4% and 14.2% respectively. The drug controlled releasing behaviors of the carriers were compared in different pH media.展开更多
Carbon-coated Fe3O4（ Fe3O4/C） microspheres activated with 1-ethyl-3-（3-dimethylaminopropyl）-carbodiimide hydrochloride（EDC） were prepared, characterized and applied to adsorb bovine serum albumin（BSA）. The pre...Carbon-coated Fe3O4（ Fe3O4/C） microspheres activated with 1-ethyl-3-（3-dimethylaminopropyl）-carbodiimide hydrochloride（EDC） were prepared, characterized and applied to adsorb bovine serum albumin（BSA）. The prepared magnetic microspheres had spherical core-shell structure with a uniform and continuous carbon coating coupled with activation by EDC, and possessed superparamagnetic characteristics. The experimental results showed that the adsorption amount of BSA on the EDC-activated Fe3O4/C（Fe3O4/C-EDC） microspheres was higher than that on the Fe3O4/C microspheres. The maximum adsorption of BSA on Fe3O4/C-EDC microspheres occurred at pH 4.7, which was the isoelectric point of BSA. At low concentrations（below 1.0 M）, salt had no noticeable effect on BSA adsorption. The BSA adsorption of Fe3O4/C-EDC microspheres had a better fit to the Langmuir model than the Freundlich isotherm and Temkin isotherm model, and the kinetic data were well described by the pseudo-second-order model. The adsorption equilibrium could be reached within 20 min. High desorption efficiency（97.6%） of BSA from Fe3O4/C-EDC microspheres was obtained with 0.5 M Na2HPO4（pH 9.4） as the desorbent.展开更多
Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeol...Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeolite microspheres (Ca-MZS) and iron cross-linked nano-Fe3O4 modified zeolite microspheres (Fe-MZS) were prepared and compared for their adsorption performance.The effects of adsorbent dosage,solution pH,initial concentration and ion content on the removal of Cu^2+ from wastewater are investigated,and the adsorption kinetics and isotherms for the adsorbent materials were analyzed.The experimental results indicate that for the initial concentration of Cu^2+ of 30 mg/L,the adsorption is noted to be most stable.The optimal initial pH for adsorbing Cu^2+ is observed to be 5.5.At an optimal dosage of Ca-MZS of 900 mg/L,the adsorption capacity is measured to be 28.25 mg/g,along with the removal rate of 72.49%.The addition of Na+ and K+ affects the adsorption of Cu^2+.For the Na^+ and K^+ concentration of 0.2 mmol/L,the Cu^2+ removal rate by Ca-MZS drops to 11.94% and 22.12%,respectively.As compared with the adsorbents such as Natural Zeolite (NZ),Ca-MS and Fe-MZS,Ca-MZS demonstrates the best removal effect in solution,where the removal rate reaches 84.27%,with the maximum adsorption capacity of 28.09 mg/g.The Cu^2+ adsorption kinetics of Ca-MZS is observed to follow the Elovich kinetic model,with the adsorption isotherm data fitting the Freundlich isotherm model by using the non-linear method.展开更多
Single-crystal Fe_3 O_4 with monodisperse microspheres structure has been used for individual electrochemical detection of heavy metal ions. Morphology and structure of the as-prepared Fe_3 O_4 microspheres were chara...Single-crystal Fe_3 O_4 with monodisperse microspheres structure has been used for individual electrochemical detection of heavy metal ions. Morphology and structure of the as-prepared Fe_3 O_4 microspheres were characterized by scanning electron microscopy(SEM), transmission electron microscopy(TEM) and X-ray diffraction(XRD). Meanwhile the electrochemical properties of the Fe_3 O_4 microspheres modified glass carbon electrodes(GCE) were characterized by cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS), and the enhanced electrochemical response in stripping voltammetry for individual detection of Pb(Ⅱ), Hg(Ⅱ), Cu(Ⅱ), and Cd(Ⅱ) was evaluated using square wave anodic stripping voltammetry(SWASV). With high specific surface area and excellent catalytic activity toward heavy metal ions, the as-prepared monodisperse and single-crystal Fe_3 O_4 microspheres show a preferable sensing sensitivity(22.2 μA/μM) and limit of detection(0.0699 μM) toward Pb(Ⅱ). Furthermore, the electrochemical sensor of Fe_3 O_4 microspheres exhibits excellent stability and it also offers potential practical applicability for the determination of heavy metal ions in real water samples. This study provides a potential simple and low cost iron oxide for the construction of sensitive electrochemical sensors applied to monitor and control the pollution of toxic metal ions.展开更多
文摘Novel hollow Fe3O4 nanoparticles for drug delivery were synthesized via a one-step template- free approach. These nanoparticles were obtained by modifing the Fe3O4 nanoparticles with 3-aminopropyltrimethoxy silane, and then grafting alginate onto the surface of amine magnetic. The hollow structure of Fe3O4 spheres was characterized by TEM, XRD, and XPS. The M-H hysteresis loop indicated that the magnetic spheres exhibit snperparamagnetic characteristics at room temperature. Daunorubicin acting as a model drug was loaded into the carrier, and the maximum percent of envelop and load were 28.4% and 14.2% respectively. The drug controlled releasing behaviors of the carriers were compared in different pH media.
基金Funded by the Major Science and Technology Program for Water Pollution Control and Treatment(No.2013ZX07202-010)
文摘Carbon-coated Fe3O4（ Fe3O4/C） microspheres activated with 1-ethyl-3-（3-dimethylaminopropyl）-carbodiimide hydrochloride（EDC） were prepared, characterized and applied to adsorb bovine serum albumin（BSA）. The prepared magnetic microspheres had spherical core-shell structure with a uniform and continuous carbon coating coupled with activation by EDC, and possessed superparamagnetic characteristics. The experimental results showed that the adsorption amount of BSA on the EDC-activated Fe3O4/C（Fe3O4/C-EDC） microspheres was higher than that on the Fe3O4/C microspheres. The maximum adsorption of BSA on Fe3O4/C-EDC microspheres occurred at pH 4.7, which was the isoelectric point of BSA. At low concentrations（below 1.0 M）, salt had no noticeable effect on BSA adsorption. The BSA adsorption of Fe3O4/C-EDC microspheres had a better fit to the Langmuir model than the Freundlich isotherm and Temkin isotherm model, and the kinetic data were well described by the pseudo-second-order model. The adsorption equilibrium could be reached within 20 min. High desorption efficiency（97.6%） of BSA from Fe3O4/C-EDC microspheres was obtained with 0.5 M Na2HPO4（pH 9.4） as the desorbent.
基金Funded by the Science Foundation of Hubei Province of China(2015CFB706)。
文摘Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeolite microspheres (Ca-MZS) and iron cross-linked nano-Fe3O4 modified zeolite microspheres (Fe-MZS) were prepared and compared for their adsorption performance.The effects of adsorbent dosage,solution pH,initial concentration and ion content on the removal of Cu^2+ from wastewater are investigated,and the adsorption kinetics and isotherms for the adsorbent materials were analyzed.The experimental results indicate that for the initial concentration of Cu^2+ of 30 mg/L,the adsorption is noted to be most stable.The optimal initial pH for adsorbing Cu^2+ is observed to be 5.5.At an optimal dosage of Ca-MZS of 900 mg/L,the adsorption capacity is measured to be 28.25 mg/g,along with the removal rate of 72.49%.The addition of Na+ and K+ affects the adsorption of Cu^2+.For the Na^+ and K^+ concentration of 0.2 mmol/L,the Cu^2+ removal rate by Ca-MZS drops to 11.94% and 22.12%,respectively.As compared with the adsorbents such as Natural Zeolite (NZ),Ca-MS and Fe-MZS,Ca-MZS demonstrates the best removal effect in solution,where the removal rate reaches 84.27%,with the maximum adsorption capacity of 28.09 mg/g.The Cu^2+ adsorption kinetics of Ca-MZS is observed to follow the Elovich kinetic model,with the adsorption isotherm data fitting the Freundlich isotherm model by using the non-linear method.
文摘Single-crystal Fe_3 O_4 with monodisperse microspheres structure has been used for individual electrochemical detection of heavy metal ions. Morphology and structure of the as-prepared Fe_3 O_4 microspheres were characterized by scanning electron microscopy(SEM), transmission electron microscopy(TEM) and X-ray diffraction(XRD). Meanwhile the electrochemical properties of the Fe_3 O_4 microspheres modified glass carbon electrodes(GCE) were characterized by cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS), and the enhanced electrochemical response in stripping voltammetry for individual detection of Pb(Ⅱ), Hg(Ⅱ), Cu(Ⅱ), and Cd(Ⅱ) was evaluated using square wave anodic stripping voltammetry(SWASV). With high specific surface area and excellent catalytic activity toward heavy metal ions, the as-prepared monodisperse and single-crystal Fe_3 O_4 microspheres show a preferable sensing sensitivity(22.2 μA/μM) and limit of detection(0.0699 μM) toward Pb(Ⅱ). Furthermore, the electrochemical sensor of Fe_3 O_4 microspheres exhibits excellent stability and it also offers potential practical applicability for the determination of heavy metal ions in real water samples. This study provides a potential simple and low cost iron oxide for the construction of sensitive electrochemical sensors applied to monitor and control the pollution of toxic metal ions.
基金Supported by the National Natural Science Foundation of China(21377126,41573115)Science and Education Integration Foundation of Institute of Chemistry,Chinese Academy of Sciences。
