Sensitive magnetic field sensor with good performances can be fabricated utilizing the giant magneto-impedance (GMI) effect of soft magnetic multi-layer thin films. The transverse and longitudinal GMI effect in patter...Sensitive magnetic field sensor with good performances can be fabricated utilizing the giant magneto-impedance (GMI) effect of soft magnetic multi-layer thin films. The transverse and longitudinal GMI effect in patterned FeSiB/Cu/FeSiB tri-layer films with the change of external magnetic field and frequency were studied at the same time. The change of the impedance of the films with the external magnetic fieldand frequency was shown. Comparing the longitudinal and transverse effect, the transverse effect has a larger linear range from zero magnetic field to a quite large magnetic field at all frequencies, and the change still were not saturated until the external magnetic field reached 1.2×104A/m, which illustrated that the films can be utilized to detect larger magnetic fields than now presented GMI sensors.展开更多
The surface tensions and contact angles of Fe_(78)Si_9B_(13) and Fe_(73.5)Cu_1Nb_3Si_(13.5)B_9 alloy melts were studied as a function of temperature in various atmospheres(vacuum, Ar and N_2 gas) and on different subs...The surface tensions and contact angles of Fe_(78)Si_9B_(13) and Fe_(73.5)Cu_1Nb_3Si_(13.5)B_9 alloy melts were studied as a function of temperature in various atmospheres(vacuum, Ar and N_2 gas) and on different substrates(Si C, Al_2O_3 and BN). It is indicated that Si_3N_4, NbN, Fe_2 Al B and B_(13)C_2 are generated as new phases at the interface between the melt and substrate, and reactive wetting behaviour exists during the heating process. The surface tensions of two alloy melts on BN substrate both firstly decrease and then increase along with increasing temperature, leading to V-shaped surface tension versus temperature, which results from atomic diffusion effects in the surface layer during the oxidation of BN and formation of C-rich layer. Comparably, the surface tensions on Al_2O_3 and Si C substrates decrease with increasing temperature throughout the entire temperature range. Among three substrates, BN exhibits the mildest wetting behaviour. The vacuum environment has the strongest protective effect on melt stability among the tested atmospheres. These findings enrich our knowledge about the effects of the substrate and atmosphere on Fe-based alloy melts at a high temperature, and provide theoretical reference for designing jet nozzles in melt-spinning techniques.展开更多
基金This work was supported by the Doctoral Training Foundation of the National Education Commission.
文摘Sensitive magnetic field sensor with good performances can be fabricated utilizing the giant magneto-impedance (GMI) effect of soft magnetic multi-layer thin films. The transverse and longitudinal GMI effect in patterned FeSiB/Cu/FeSiB tri-layer films with the change of external magnetic field and frequency were studied at the same time. The change of the impedance of the films with the external magnetic fieldand frequency was shown. Comparing the longitudinal and transverse effect, the transverse effect has a larger linear range from zero magnetic field to a quite large magnetic field at all frequencies, and the change still were not saturated until the external magnetic field reached 1.2×104A/m, which illustrated that the films can be utilized to detect larger magnetic fields than now presented GMI sensors.
基金supported by the National Natural Science Foundation of China(Grant No.51501043)National Scientific and Technological Support Projects(Grant No.2013BAE08B00)+1 种基金National Key Scientific Instrument and Equiment Development Project(Grant No.2014YQ120351)Science and Technology Program of Beijing(Grant No.Z141100003814007)
文摘The surface tensions and contact angles of Fe_(78)Si_9B_(13) and Fe_(73.5)Cu_1Nb_3Si_(13.5)B_9 alloy melts were studied as a function of temperature in various atmospheres(vacuum, Ar and N_2 gas) and on different substrates(Si C, Al_2O_3 and BN). It is indicated that Si_3N_4, NbN, Fe_2 Al B and B_(13)C_2 are generated as new phases at the interface between the melt and substrate, and reactive wetting behaviour exists during the heating process. The surface tensions of two alloy melts on BN substrate both firstly decrease and then increase along with increasing temperature, leading to V-shaped surface tension versus temperature, which results from atomic diffusion effects in the surface layer during the oxidation of BN and formation of C-rich layer. Comparably, the surface tensions on Al_2O_3 and Si C substrates decrease with increasing temperature throughout the entire temperature range. Among three substrates, BN exhibits the mildest wetting behaviour. The vacuum environment has the strongest protective effect on melt stability among the tested atmospheres. These findings enrich our knowledge about the effects of the substrate and atmosphere on Fe-based alloy melts at a high temperature, and provide theoretical reference for designing jet nozzles in melt-spinning techniques.
