Asymmetrical Fabry-Perot cavity slot micro-ring resonator and its sensing characteristics

To achieve high quality factor and high-sensitivity refractive index sensor,a slot micro-ring resonator(MRR)based on asymmetric Fabry-Perot(FP)cavity was proposed.The structure consisted of a pair of elliptical holes to form an FP cavity and a microring resonator.The two different optical modes generated by the micro-ring resonator were destructively interfered to form a Fano line shape,which improved the system sensitivity while obtaining a higher quality factor and extinction ratio.The transmission principle of the structure was analyzed by the transfer matrix method.The transmission spectrum and mode field distribution of the proposed structure were simulated by the finite difference time domain(FDTD)method,and the key structural parameters affecting the Fano line shape in the device were optimized.The simulation results show that the quality factor of the device reached 22037.1,and the extinction ratio was 23.9 dB.By analyzing the refractive index sensing characteristics,the sensitivity of the structure was 354 nm·RIU−1,and the detection limit of the sensitivity was 2×10−4 RIU.Thus,the proposed compact asymmetric FP cavity slot micro-ring resonator has obvious advantages in sensing applications owing to its excellent performance.

Ultrasonic sensitivity-improved fiber-optic Fabry-Perot interferometer using a beam collimator and its application for ultrasonic imaging of seismic physical models

An ultrasonic sensitivity-improved fiber-optic Fabry-Perot interferometer （FPI） is proposed and employed for ultra- sonic imaging of seismic physical models （SPMs）. The FPI comprises a flexible ultra-thin gold film and the end face of a graded-index multimode fiber （MMF）, both of which are enclosed in a ceramic tube. The MMF in a specified length can collimate the diverged light beam and compensate for the light loss inside the air cavity, leading to an increased spectral fringe visibility and thus a steeper spectral slope. By using the spectral sideband filtering technique, the collimated FP1 shows an improved ultrasonic response. Moreover, two-dimensional images of two SPMs are achieved in air by recon- structing the pulse-echo signals through using the time-of-flight approach. The proposed sensor with easy fabrication and compact size can be a good candidate for high-sensitivity and high-precision nondestructive testing of SPMs.

Using Brillouin fiber-optic ring laser to provide base station with uplink optical carrier in a 10 GHz radio over fiber system

In this paper, a 10 GHz radio over fiber system is analyzed. The Brillouin fiber-optic ring laser is used in the center station （CS） to suppress the optical carrier for the modulation depth enhancement. Simultaneously, the Stockes wave induced by the Brillouin amplification injects and locks the Fabry-Perot （FP） laser to output a signal-mode optical source, which works as the uplink optical carrier.

Surface Plasmon Interference Lithography Assisted by a Fabry-Perot Cavity Composed of Subwavelength Metal Grating and Thin Metal Film

A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated results indicate that uniform straight interference fringes with high contrast and high electric-field intensity are formed in the resist under the F-P cavity. The analyses of spatial frequency spectra illuminate the physical mechanism of the formation for the interference fringes. The influence of the F-P cavity spacing is discussed in detail. Moreover, the error analyses reveal that all parameters except the metal grating period in this scheme can bear large tolerances for the device fabrication.

An Ultraviolet Fiber Fabry-Perot Cavity for Florescence Collection of Trapped Ions

We demonstrate a fiber Fabry-Pérot cavity in the ultraviolet range, which covers the florescence wavelength for the 2P to 2S transition of Yb and is designed in the bad cavity limit for florescence collection. Benefiting from both the small cavity mode volume and the large atom dipole, a cavity with moderate finesse and high transmission still supports a good cooperativity, which is made and tested in experiment. Based on the measured experimental parameters, simulation performed on the cavity and ion shows a Purcell factor better than 2.5 and a single-mode fiber collection efficiency over 10%. This technology can support ultra-bright single photon sources based on trapped ions and can provide the possibility to link remote atoms as a quantum network.

Improved Directivity of an OAM Antenna by a Fabry-Perot Cavity: An Experimental Study

The circular phased antenna array is commonly used for generating waves bearing Orbital Angular Momentum (OAM) in the radio frequency band, but it achieves a relatively low directivity. To overcome this drawback, we present here a method to improve the directivity of an OAM circular phased antenna array by embedding it inside a Fabry-Perot cavity. The Fabry-Perot cavity contains three main parts: a partially reflecting surface (PRS), an air cavity and a ground plane. Simulation data show that the directivity of this new OAM antenna achieves an improvement of 8.2 dB over the original array. A prototype is realized and characterized. The simulated and measured characteristics are in good agreement.

Low insertion loss silicon-based spatial light modulator with high reflective materials outside Fabry–Perot cavity

The extinction ratio and insertion loss of spatial light modulator are subject to the material problem, thus limiting its applications. One reflection-type silicon-based spatial light modulator with high reflective materials outside the Fabry-Perot cavity is demonstrated in this paper. The reflectivity values of the outside-cavity materials with different film layer numbers are simulated. The reflectivity values of 6-pair Ta2O5/SiO2 films at 1550 nm are experimentally verified to be as high as 99.9%. The surfaces of 6-pair Ta2O5/SiO2 films are smooth: their root-mean-square roughness values are as small as 0.53 nm. The insertion loss of the device at 1550 nm is only 1.2 dB. The high extinction ratio of the device at 1550 nm and 11 V is achieved to be 29.7 dB. The spatial light modulator has a high extinction ratio and low insertion loss for applications.

Characterization of Miniature Fiber-Optic Fabry-Perot Interferometric Sensors Based on Hollow Silica Tube

A miniature fiber-optic Fabry-Perot interferometer （MOFPI） fabricated by splicing a hollow silica tube （HST） with inner diameter of 4 μm to the end of a single-mode fiber is investigated and experimentally demonstrated. The theoretical relationship between the free spectrum range and the length of HST is verified by fabricating several MOFPIs with different lengths. We characterize the MOFPIs for temperature, liquid refractive index, and strain. Experimental results show that the sensitivities of the temperature, liquid refractive index, and strain are 16.42μm/℃, -118.56dB/RIU, and 1.21 pm/με, respectively.

Recent Progress in Multiparameter Measurement Based on Extrinsic Fiber-Optic Fabry-Perot Interferometers and Fiber Gratings

This paper presents a review of recent progress in simultaneous measurement of multiparameters including strain, temperature, vibration, transverse load, based on the combinations of extrinsic fiber-optic Fabry-Perot interferometers and fiber gratings.

Dual-band simultaneous lasing in MOFs single crystals with Fabry-Perot microcavities

Multi-band microlasers based on single microcrystalline materials with Fabry-Perot(F-P) cavities are critically and technologically essential. Here, we demonstrate simultaneous dual-band lasing output(615 and 685 nm) in metal-organic frameworks(MOFs) and organic dyes hybrid single crystals, which support F-P resonances. Through a two-step assembly strategy, two different types of cationic pyridinium hemicyanine dye molecules can be encapsulated into the channel pores of anionic bioMOF-1-2 Me successfully. In addition, the employment of the host-guest system significantly increases the dye loading, enhances luminescent efficiency, and diminishes the aggregation-caused quenching(ACQ) effect in the resultant MOFs/dye composites.This finding not only combines the characteristic of MOFs materials with excellent luminescent properties of organic dyes, but also points out a simple and promising strategy to design multi-band microlasers based on F-P mechanism, opening a low-cost avenue for the rational design of miniaturized lasers in the future.

Design of Fiber Magnetic Field Sensor Based on Fiber Bragg Grating Fabry-Perot Cavity Ring-Down Spectroscopy

A novel fiber magnetic sensor based on the fiber Bragg grating Fabry-Perot （FBG-FP） cavity ring-down technique with pulse laser injection is proposed and demonstrated theoretically. A general expression of the intensity of the output electric field is derived, and the effect of the external magnetic field on the ring-down time is discussed. The results show that the output light intensity and the ring-down time of the FBG-FP cavity are in the inverse proportion to the magnitude of the external magnetic field. Our results demonstrate the new concept of the fiber magnetic sensor with the FBG-FP cavity ring-down spectroscopy and the technical feasibility.

Trace Ammonia Detection Based on Near-Infrared Fiber-Optic Cantilever-Enhanced Photoacoustic Spectroscopy

A trace ammonia(NH3)detection system based on the near-infrared fiber-optic cantilever-enhanced photoacoustic spectroscopy(CEPAS)is proposed.A fiber-optic extrinsic Fabry-Perot interferometer(EFPI)based cantilever microphone has been designed to detect the photoacoustic pressure signal.The microphone has many advantages,such as small size and high sensitivity.A near-infrared tunable erbium-doped fiber laser(EDFL)amplified by an erbium-doped fiber amplifier(EDFA)is used as a photoacoustic excitation light source.To improve the sensitivity,the photoacoustic signal is enhanced by a photoacoustic cell with a resonant frequency of 1624 Hz.When the wavelength modulation spectroscopy(WMS)technique is applied,the weak photoacoustic signal is detected by the second-harmonic detection technique.Trace NH3 measurement experiments demonstrate that the designed fiber-optic CEPAS system has a linear response to concentrations in the range of 0 ppm‒20 ppm at the wavelength of 1522.448 nm.Moreover,the detection limit is estimated to be 3.2 ppb for a lock-in integration time of 30 s.

Fiber-Optic Microstructure Sensors:A Review

This paper reviews a wide variety of fiber-optic microstructure(FOM)sensors,such as fiber Bragg grating(FBG)sensors,long-period fiber grating(LPFG)sensors,Fabry-Perot interferometer(FPI)sensors,Mach-Zchnder interferometer(MZI)sensors,Michelson interferometer(MI)sensors,and Sagnac interferometer(SI)sensors.Each FOM sensor has been introduced in the terms of structure types,fabrication methods,and their sensing applications.In addition,the sensing characteristics of different structures under the same type of FOM sensor are compared,and the sensing characteristics of the all FOM sensors,including advantages,disadvantages,and main sensing parameters,are summarized.We also discuss the future development of FOM sensors.

Loss Measurement of High-Finesse Fabry-Perot Cavities

The loss of a high-finesse Fabry-Perot cavity was measured using frequency scan and cavity ring-down techniques.Different transverse modes were examined by sweeping the frequency of the laser across the corresponding resonances.In addition,cavity ring-down technique was used to measure the loss of the Fabry-Perot cavity and a simple model was employed to remove the influence of finite response time of the optical switch and the detection circuit.

Analysis of Focusing Orbital Angular Momentum Wave Using Fabry-Perot Cavity

One of the biggest obstacles to the application of orbital angular momentum(OAM)in the microwave field is its divergence problem.This paper presents a full analysis of generating and focusing OAM waves using original and improved Fabry-Perot(F-P)cavities.Utilizing combination of microstrip antenna and original F-P cavity,the gain of the OAM antenna is enhanced from 4.0 dBi to 9.3 dBi and the corresponding divergence angle is decreased from 41to 24.To further improve the performance of the OAM antenna,the improved F-P cavity is introduced.The simulated results show that the gain is further enhanced to 12.0 dBi and the divergence angle is further decreased to be 15.

THE NEW BEHAVIOR OF BIFURCATION AND CHAOS IN A NONLINEAR FABRY-PEROT CAVITY

Ⅰ. INTRODUCTION In a Fabry-Perot cavity, there exist two electric fields, which propagate in the counter direction and interact with each other via the absorber, so that the theoretical analysis of the Fabry-Perot system is very complicated. On account of this, many authors had focused their attention on the ring cavity, a considerably simple system. It was proposed as a

Ultrasensitive monolayer-MoS_(2) heterojunction photodetectors realized via an asymmetric Fabry-Perot cavity

Two-dimensional(2D)materials have attracted significant attention as a promising candidate for electronic and optoelectronic devices.However,low absorption impairs the performance of few-layer 2D material-based photodetectors(PDs).Herein,we purpose an asymmetric Fabry-Perot cavity consisting of a dielectric layer and metallic film to enhance the interactions between light and monolayer molybdenum disulfide(MoS_(2)).The external quantum efficiency of the monolayer MoS_(2)heterojunction PD is enhanced by more than two orders of magnitude via optimizing the thickness of the dielectric layer.The monolayer-MoS_(2)/nickel oxide heterojunction PD exhibits a large on/off ratio of 2×10^(5),a responsivity of 703 A W^(-1),and an ultrahigh detectivity of 1.31×10^(15)Jones.The detectivity is the best value ever reported for monolayer-MoS_(2)heterojunction PDs.Our results may pave the way for high-performance 2D materialbased PDs.

Fiber-Optic Displacement Sensor Based on the DBR Fiber Laser

The fiber-optic displacement sensor based on the distributed Bragg reflector fiber laser is proposed, that is, the fiber laser cavity is attached to the measured object, when the measured object is stretched or contracted, and the length of the fiber laser cavity is also stretched or contracted accordingly. In view of the nonlinearity of the fiber-optic displacement sensor, the calibration based on piezoelectric ceramics is applied to improve the linearity of the displacement sensor. Experiment results show that the fiber-optic displacement sensor has a linear response with the nominal working distance of 90 um.

High-sensitivity refractive index sensors based on Fano resonance in a metal-insulator-metal based arc-shaped resonator coupled with a rectangular stub

A metal-insulator-metal(MIM)-based arc-shaped resonator coupled with a rectangular stub(MARS) structure is proposed. This structure can generate two tunable Fano resonances originating from two different mechanisms. The structure has the advantage of being sensitive to the refractive index, and this feature makes it favorable for application in various microsensors. The relationship between the structural parameters and Fano resonance is researched using the finite element method(FEM) based on the software COMSOL Multiphysics 5.4. The simulation reveals that the sensitivity reaches1900 nm/refractive index unit(RIU), and the figure of merit(FOM) is 23.75.

Theoretical analysis of transmission characteristics for all fiber,multi-cavity Fabry-Perot filters based on fiber Bragg gratings

The characteristics of transmission spectra for the all fiber, multi-cavity Fabry- Perot （FP） configuration based on fiber Bragg gratings （FBG） are theoretically analyzed and modeled. The general transmission matrix function for the structure with any number of cavities is derived, and explicit expression of the power trans- mission coefficient for symmetrical two-cavity FP is presented. The general condi- tions for flat-top single resonant peak at the central wavelength in FBG stop band are derived and verified in the numerical simulation section. The transmission peaks of single-cavity and two-cavity FP structures are compared and discussed, and results show that compared to the single-cavity FP, flatness of the top and steepness at the edge of transmission peak can be improved by introducing one more cavity. The resonant transmission peak properties of two-cavity structure are investigated in detail for various values of cavity length and FBGs with different reflection characteristics, and the design guidelines for transmission-type filters are presented. The results show that the steepness of peak slope can be improved by increase of FBG reflectivities, and these kinds of filters can be used as nar- row-band single-channel selectors and multi-channel wavelength de-multiplexing by properly choosing the length of cavities and reflectivities of FBGs.