Properties of symmetrical layers as matching layers in multilayer thin film design were analyzed. A calculation method was presented to derive parameters of desired equivalent refractive index. A harmonic beam splitte...Properties of symmetrical layers as matching layers in multilayer thin film design were analyzed. A calculation method was presented to derive parameters of desired equivalent refractive index. A harmonic beam splitter was designed and fabricated to test this matching method. OCIS codes： 230.1360, 220.0220, 310.6860.展开更多
A novel tuning fork micromachined gyroscope, based on slide-film damping, is presented. The electrostatic driving gyroscope consists of two driving masses each of which supports one sensitive mass. The angular rate is...A novel tuning fork micromachined gyroscope, based on slide-film damping, is presented. The electrostatic driving gyroscope consists of two driving masses each of which supports one sensitive mass. The angular rate is sensed by the differential capacitances consisted of movable bar electrodes and fixed bar electrodes located on the glass wafer. The gyroscope can operate at atmospheric pressure with slide film damping in the driving and sensing directions, eliminate vacuum packaging and restrain cross-axis acceleration signal. The results of design and simulation show that the driving and sensing mode frequencies are 3 106 Hz and 3 175 Hz,respectively, and the Q-values in driving and sensitive modes are 1 721 and 1 450 respectively. The design resolution is 0.025°/s.展开更多
A new effective tool design of three-rank form of electroremoval was present using a precision recycle system offering faster performance in removing the indium-tin-oxide(ITO) thin-films on color filter surface of dis...A new effective tool design of three-rank form of electroremoval was present using a precision recycle system offering faster performance in removing the indium-tin-oxide(ITO) thin-films on color filter surface of displays. Higher electric power is not required since the three-rank form tool is adopted as a feeding mode to reduce the response area. The low yield of ITO persists throughout the entire semiconductor production process. By establishing a recycle process of ultra-precise removal of the thin-film nanostructure, defective products in the optoelectronic semiconductors industry can be effectively recycled, decreasing both production costs and pollution. A 5th generation TFT-LCD was used. The design features of the removal processes for the thin-films and the tool design of three-rank form were of major interest. For the precision removal processes, a pulsed current can improve the effect of dreg discharge and contributes to the achievement of a fast workpiece (displays' color filter) feed rate, but raises the current rating. High flow velocity of the electrolyte with a high rotational speed of the tool electrodes elevates the ITO removal effect. A displays' color filter with a fast feed rate is combined with enough electric power to provide highly effective removal. A small thickness of the rank and a small arc angle of the negative-electrode correspond to a higher removal rate for ITO-film. An effective three-rank form negative-electrode provides larger discharge mobility and better removal effect. It only needs a short period of time to remove the ITO easily and cleanly.展开更多
The Epitaxial GaN thin films have been fabricated by Ion Beam Assisted Deposition (IBAD) process using nitrogen ions with hyperthermal energies on the polyimides polymer substrates. By applying with the Reflection of ...The Epitaxial GaN thin films have been fabricated by Ion Beam Assisted Deposition (IBAD) process using nitrogen ions with hyperthermal energies on the polyimides polymer substrates. By applying with the Reflection of High-Energy Electron Diffraction (RHEED), Scanning Electron Microscopy (SEM) and Quantum Design Physical Properties Measurement System, the behaviour of hexagonal GaN thin films is investigated. The result showed that the high quality of the deposited GaN layers kept appearing for many parameters depending on the temperature greatly. The behaviour of high quality of epitaxial GaN coating on the polyimide polymer substrates is a promising material for optoelectronic devices and semiconductor devices application.展开更多
A dynamic model of a flexible rotor-sliding bearing system ( FRSBS ) with asqueeze film damper ( SFD) is established. Considered in the model are oil film inertia force,damping farce, clearance excitation force, inter...A dynamic model of a flexible rotor-sliding bearing system ( FRSBS ) with asqueeze film damper ( SFD) is established. Considered in the model are oil film inertia force,damping farce, clearance excitation force, interference force of different frequencies and staticload, as opposed to previous research. On the basis of this model, the optimal design of the systemis deeply studied. Simulation shows that the system optimization design can effectively improve thesystem stability.展开更多
文摘Properties of symmetrical layers as matching layers in multilayer thin film design were analyzed. A calculation method was presented to derive parameters of desired equivalent refractive index. A harmonic beam splitter was designed and fabricated to test this matching method. OCIS codes： 230.1360, 220.0220, 310.6860.
文摘A novel tuning fork micromachined gyroscope, based on slide-film damping, is presented. The electrostatic driving gyroscope consists of two driving masses each of which supports one sensitive mass. The angular rate is sensed by the differential capacitances consisted of movable bar electrodes and fixed bar electrodes located on the glass wafer. The gyroscope can operate at atmospheric pressure with slide film damping in the driving and sensing directions, eliminate vacuum packaging and restrain cross-axis acceleration signal. The results of design and simulation show that the driving and sensing mode frequencies are 3 106 Hz and 3 175 Hz,respectively, and the Q-values in driving and sensitive modes are 1 721 and 1 450 respectively. The design resolution is 0.025°/s.
基金supported by BEN TEN THECO.,and National Science Council,under contract 96-2622-E-152-001-CC397-2410-H-152-016
文摘A new effective tool design of three-rank form of electroremoval was present using a precision recycle system offering faster performance in removing the indium-tin-oxide(ITO) thin-films on color filter surface of displays. Higher electric power is not required since the three-rank form tool is adopted as a feeding mode to reduce the response area. The low yield of ITO persists throughout the entire semiconductor production process. By establishing a recycle process of ultra-precise removal of the thin-film nanostructure, defective products in the optoelectronic semiconductors industry can be effectively recycled, decreasing both production costs and pollution. A 5th generation TFT-LCD was used. The design features of the removal processes for the thin-films and the tool design of three-rank form were of major interest. For the precision removal processes, a pulsed current can improve the effect of dreg discharge and contributes to the achievement of a fast workpiece (displays' color filter) feed rate, but raises the current rating. High flow velocity of the electrolyte with a high rotational speed of the tool electrodes elevates the ITO removal effect. A displays' color filter with a fast feed rate is combined with enough electric power to provide highly effective removal. A small thickness of the rank and a small arc angle of the negative-electrode correspond to a higher removal rate for ITO-film. An effective three-rank form negative-electrode provides larger discharge mobility and better removal effect. It only needs a short period of time to remove the ITO easily and cleanly.
文摘The Epitaxial GaN thin films have been fabricated by Ion Beam Assisted Deposition (IBAD) process using nitrogen ions with hyperthermal energies on the polyimides polymer substrates. By applying with the Reflection of High-Energy Electron Diffraction (RHEED), Scanning Electron Microscopy (SEM) and Quantum Design Physical Properties Measurement System, the behaviour of hexagonal GaN thin films is investigated. The result showed that the high quality of the deposited GaN layers kept appearing for many parameters depending on the temperature greatly. The behaviour of high quality of epitaxial GaN coating on the polyimide polymer substrates is a promising material for optoelectronic devices and semiconductor devices application.
文摘A dynamic model of a flexible rotor-sliding bearing system ( FRSBS ) with asqueeze film damper ( SFD) is established. Considered in the model are oil film inertia force,damping farce, clearance excitation force, interference force of different frequencies and staticload, as opposed to previous research. On the basis of this model, the optimal design of the systemis deeply studied. Simulation shows that the system optimization design can effectively improve thesystem stability.
