As a cutting tool,diamond films made by chemical vapor deposition(CVD) outperformed polycrystalline diamond(PCD) sintered under ultrahigh pressure.For example,the longevity of the CVD tools may be 2～5 times that of P...As a cutting tool,diamond films made by chemical vapor deposition(CVD) outperformed polycrystalline diamond(PCD) sintered under ultrahigh pressure.For example,the longevity of the CVD tools may be 2～5 times that of PCD inserts.In addition,the former cutting paths are strainghter with less chipping on the edge.However,there have been no report on CVD diamond films that were used as a roller scriber for splitting large glass panels.Our research demonstrated that the CVD diamond film could concentrate the energy in a smaller area(about 1/4),so the glass compressed by the tip of the diamond film was under a larger tensile stress in perpendicular to the direction of compression.The tensile stress then initiated the microcracks that were more in line with the direction of the compression. The reason that CVD diamond film could concentrate the compressive stress was due to its 100%diamond content.The high diamond content could allow the tip to be polished sharper.In contrast,the PCD cutting tip contained micro grains of cobalt that were softer than glass.As a result,the compressional stress was spreading out due to the larger area of contact.Consequently,the microcracks initiated at the PCD tip were random and they might not propagate along the direction of cutting.展开更多
航空发动机主轴中滚动轴承为了降低系统振动经常与弹性环式挤压油膜阻尼器(elastic ring squeeze film damper, ERSFD)联合使用。基于滚动轴承动力学理论和流体力学控制方程,采用变步长积分算法建立圆柱滚子轴承与ERSFD耦合的动力学分...航空发动机主轴中滚动轴承为了降低系统振动经常与弹性环式挤压油膜阻尼器(elastic ring squeeze film damper, ERSFD)联合使用。基于滚动轴承动力学理论和流体力学控制方程,采用变步长积分算法建立圆柱滚子轴承与ERSFD耦合的动力学分析模型,对外圈带ERSFD的圆柱滚子轴承保持架振动特性和打滑率进行研究。研究结果表明:与未装配ERSFD的圆柱滚子轴承相比,ERSFD可以提高圆柱滚子轴承保持架的稳定性。过大或过小的弹性环凸台数量与宽度都不利于圆柱滚子轴承保持架的稳定性,需要选择合适的凸台数量和宽度。径向载荷与转速对带弹性环的圆柱滚子轴承保持架稳定性影响显著,保持架涡动频率的谐波次数随着径向载荷的增加而减少,其对应的幅值也减小;保持架涡动频率的谐波次数随着转速的增加而增加,其对应幅值也增加。展开更多
文摘As a cutting tool,diamond films made by chemical vapor deposition(CVD) outperformed polycrystalline diamond(PCD) sintered under ultrahigh pressure.For example,the longevity of the CVD tools may be 2～5 times that of PCD inserts.In addition,the former cutting paths are strainghter with less chipping on the edge.However,there have been no report on CVD diamond films that were used as a roller scriber for splitting large glass panels.Our research demonstrated that the CVD diamond film could concentrate the energy in a smaller area(about 1/4),so the glass compressed by the tip of the diamond film was under a larger tensile stress in perpendicular to the direction of compression.The tensile stress then initiated the microcracks that were more in line with the direction of the compression. The reason that CVD diamond film could concentrate the compressive stress was due to its 100%diamond content.The high diamond content could allow the tip to be polished sharper.In contrast,the PCD cutting tip contained micro grains of cobalt that were softer than glass.As a result,the compressional stress was spreading out due to the larger area of contact.Consequently,the microcracks initiated at the PCD tip were random and they might not propagate along the direction of cutting.
文摘航空发动机主轴中滚动轴承为了降低系统振动经常与弹性环式挤压油膜阻尼器(elastic ring squeeze film damper, ERSFD)联合使用。基于滚动轴承动力学理论和流体力学控制方程,采用变步长积分算法建立圆柱滚子轴承与ERSFD耦合的动力学分析模型,对外圈带ERSFD的圆柱滚子轴承保持架振动特性和打滑率进行研究。研究结果表明:与未装配ERSFD的圆柱滚子轴承相比,ERSFD可以提高圆柱滚子轴承保持架的稳定性。过大或过小的弹性环凸台数量与宽度都不利于圆柱滚子轴承保持架的稳定性,需要选择合适的凸台数量和宽度。径向载荷与转速对带弹性环的圆柱滚子轴承保持架稳定性影响显著,保持架涡动频率的谐波次数随着径向载荷的增加而减少,其对应的幅值也减小;保持架涡动频率的谐波次数随着转速的增加而增加,其对应幅值也增加。
