期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Evaluation of formation damages during filter cake deposition and removal process:The effect of primary damage on secondary damage 被引量:1
1
作者 Jaber Al Jaberi Badr S.Bageri +3 位作者 Abdulrauf R.Adebayo Shirish Patil Assad Barri Rahul B.Salin 《Petroleum Science》 SCIE CAS CSCD 2021年第4期1153-1162,共10页
The properties of oil and gas formation could be significantly damaged during drilling and completion operations as a result of mud invasion,fluid incompatibility and interaction with rock minerals.This paper presents... The properties of oil and gas formation could be significantly damaged during drilling and completion operations as a result of mud invasion,fluid incompatibility and interaction with rock minerals.This paper presents a systematic method for evaluating formation damage during filter cake deposition(primary damage)and removal process(secondary damage).The role of primary damage in the evolution of secondary damage was also investigated.The interaction of the filter cake solvent(chelating agent solution)with the rock samples was implemented through core flooding experiment.Nuclear Magnetic Resonance(NMR)was used to evaluate the properties of the rock sample,pre and post filter cake deposition and removal processes.The results show that secondary damaged is a strong function of the location and the intensity of the primary damage.The rock type and its pore structure also play important roles in both primary and secondary damage.The extent of secondary damage depends on the amount of barium sulphate deposited during primary damage.The chelating agent used to dissolve the barites in sandstones,deposited the barite in the small pores while it enlarges the bigger pores.In contrast,the chelating agent in the carbonate samples had multiple barite deposition points. 展开更多
关键词 Formation damage Filter cake removal Filter cake deposition Chelating agents Solid invasion filtration process
下载PDF
Effect of Gas Bubbling Filtration Treatment on Microporosity Variation in A356 Aluminium Alloy
2
作者 Choongdo Lee Taeil So Kwangseon Shin 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2016年第7期638-646,共9页
In the present study, the contribution of the gas bubbling filtration (GBF) process to the microporosity variation, microstructural characteristics and tensile properties of A356 aluminium alloy was investigated. Th... In the present study, the contribution of the gas bubbling filtration (GBF) process to the microporosity variation, microstructural characteristics and tensile properties of A356 aluminium alloy was investigated. The test specimens were fabricated through gravity casting in terms of the process variables: the degassing time, the impeller rotation and the aperture size of gas inlet hole. The density measurement and scanning electron microscope fractography analyses were conducted to evaluate the variation of the volumetric porosity and fractographic porosity with the GBF process, respec- tively. The fractographic porosity of the specimens can be minimised under specific GBF conditions in terms of the buoyant velocity and the absorbing capacity of gas bubbles, the inclusion of oxide films, whereas the volumetric porosity can be wholly reduced on the lapse of degassing time. The ultimate tensile strength (UTS) and elongation at optimal conditions were improved to approximately 30 MPa and 1.5% compared with no GBF treatment. Even though an extension of the degassing time and/or excessive stirring action of the melt may induce the inclusion of bifilm oxides and the increase of fractographic porosity, the tensile properties of over-treated specimens were maintained to a level which is similar to those that did not undergo GBF treatment due to the grain refinement accompanying with the GBF process. In addition, the defect susceptibility of UTS and elongation to microporosity variation could be remarkably improved at an optimal GBF condition. 展开更多
关键词 Aluminium alloy MICROPOROSITY Gas bubbling filtration process (GBF) Tensile property
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部