This paper deals with the design of an intelligent access control system based on the fingerprint sensor FPC- 1011C. The design uses the S3C2410 and TMS320VC5510A as the system processor. A fingerprint acquisition mod...This paper deals with the design of an intelligent access control system based on the fingerprint sensor FPC- 1011C. The design uses the S3C2410 and TMS320VC5510A as the system processor. A fingerprint acquisition module and a wireless alarm module were designed by using the fingerprint sensor FPC1011C and GPRS module SIM100 respectively. The whole system was implemented wireless alarm through messages and GPRS-Internet in the GSM/GPRS web. In order to achieve the simple and high Real-time system, the μC-Linux system migration was also implemented.展开更多
This paper presents a 591×438-DPI ultrasonic fingerprint sensor.The sensor is based on a piezoelectric micromachined ultrasonic transducer(PMUT)array that is bonded at wafer-level to complementary metal oxide sem...This paper presents a 591×438-DPI ultrasonic fingerprint sensor.The sensor is based on a piezoelectric micromachined ultrasonic transducer(PMUT)array that is bonded at wafer-level to complementary metal oxide semiconductor(CMOS)signal processing electronics to produce a pulse-echo ultrasonic imager on a chip.To meet the 500-DPI standard for consumer fingerprint sensors,the PMUT pitch was reduced by approximately a factor of two relative to an earlier design.We conducted a systematic design study of the individual PMUT and array to achieve this scaling while maintaining a high fill-factor.The resulting 110×56-PMUT array,composed of 30×43-μm^(2) rectangular PMUTs,achieved a 51.7% fill-factor,three times greater than that of the previous design.Together with the custom CMOS ASIC,the sensor achieves 2 mV kPa^(−1) sensitivity,15 kPa pressure output,75μm lateral resolution,and 150μm axial resolution in a 4.6 mm×3.2 mm image.To the best of our knowledge,we have demonstrated the first MEMS ultrasonic fingerprint sensor capable of imaging epidermis and sub-surface layer fingerprints.展开更多
Fingerprint is a very popular and an ancient biometric technology to uniquely identify a person. In this paper, a fingerprint matcher is proposed which uses the global and local adaptive binarization and global minuti...Fingerprint is a very popular and an ancient biometric technology to uniquely identify a person. In this paper, a fingerprint matcher is proposed which uses the global and local adaptive binarization and global minutia features. The fingerprint data is collected using three different authentication devices based on optical sensors. The experimental results are compared with the National Institute of Standards and Technology （NIST） Bozorth algorithm and various authentication fingerprint sensors. The accuracy of the proposed algorithm has been improved significantly compared with that of the NIST Bozorth algorithm.展开更多
文摘This paper deals with the design of an intelligent access control system based on the fingerprint sensor FPC- 1011C. The design uses the S3C2410 and TMS320VC5510A as the system processor. A fingerprint acquisition module and a wireless alarm module were designed by using the fingerprint sensor FPC1011C and GPRS module SIM100 respectively. The whole system was implemented wireless alarm through messages and GPRS-Internet in the GSM/GPRS web. In order to achieve the simple and high Real-time system, the μC-Linux system migration was also implemented.
文摘This paper presents a 591×438-DPI ultrasonic fingerprint sensor.The sensor is based on a piezoelectric micromachined ultrasonic transducer(PMUT)array that is bonded at wafer-level to complementary metal oxide semiconductor(CMOS)signal processing electronics to produce a pulse-echo ultrasonic imager on a chip.To meet the 500-DPI standard for consumer fingerprint sensors,the PMUT pitch was reduced by approximately a factor of two relative to an earlier design.We conducted a systematic design study of the individual PMUT and array to achieve this scaling while maintaining a high fill-factor.The resulting 110×56-PMUT array,composed of 30×43-μm^(2) rectangular PMUTs,achieved a 51.7% fill-factor,three times greater than that of the previous design.Together with the custom CMOS ASIC,the sensor achieves 2 mV kPa^(−1) sensitivity,15 kPa pressure output,75μm lateral resolution,and 150μm axial resolution in a 4.6 mm×3.2 mm image.To the best of our knowledge,we have demonstrated the first MEMS ultrasonic fingerprint sensor capable of imaging epidermis and sub-surface layer fingerprints.
文摘Fingerprint is a very popular and an ancient biometric technology to uniquely identify a person. In this paper, a fingerprint matcher is proposed which uses the global and local adaptive binarization and global minutia features. The fingerprint data is collected using three different authentication devices based on optical sensors. The experimental results are compared with the National Institute of Standards and Technology （NIST） Bozorth algorithm and various authentication fingerprint sensors. The accuracy of the proposed algorithm has been improved significantly compared with that of the NIST Bozorth algorithm.
