First-Principles Investigation of Charge Transfer Mechanism of B-Doped 3C-SiC Semiconductor Material

This study delves into the charge transfer mechanism of boron (B)-doped 3C-SiC through first-principles investigations. We explore the effects of B doping on the electronic properties of 3C-SiC, focusing on a 12.5% impurity concentration. Our comprehensive analysis encompasses structural properties, electronic band structures, and charge density distributions. The optimized lattice constant and band gap energy of 3C-SiC were found to be 4.373 Å and 1.36 eV respectively, which is in agreement with previous research (Bui, 2012;Muchiri et al., 2018). Our results show that B doping narrows the band gap, enhances electrical conductivity, and influences charge transfer interactions. The charge density analysis reveals substantial interactions between B dopants and surrounding carbon atoms. This work not only enhances our understanding of the material’s electronic properties, but also highlights the importance of charge density analysis for characterizing charge transfer mechanisms and their implications in the 3C-SiC semiconductors.

Comparative study of Mo2Ga2C with superconducting MAX phase Mo2GaC： First-principles calculations

The structural, electronic, optical and thermodynamic properties of Mo2Ga2C are investigated using density func- tional theory （DFT） within the generalized gradient approximation （GGA）. The optimized crystal structure is obtained and the lattice parameters are compared with available experimental data. The electronic density of states （DOS） is calculated and analyzed. The metallic behavior for the compound is confirmed and the value of DOS at Fermi level is 4.2 states per unit cell per eV. Technologically important optical parameters （e.g., dielectric function, refractive index, absorption coefficient, photo conductivity, reflectivity, and loss function） are calculated for the first time. The study of dielectric constant （ε1） indicates the Drude-like behavior. The absorption and conductivity spectra suggest that the compound is metallic. The reflectance spectrum shows that this compound has the potential to be used as a solar reflector. The thermodynamic properties such as the temperature and pressure dependent bulk modulus, Debye temperature, specific heats, and thermal expansion coefficient of Mo2Ga2C MAX phase are derived from the quasi-harmonic Debye model with phononic effect also for the first time. Analysis of Tc expression using available parameter values （DOS, Debye temperature, atomic mass, etc.） suggests that the compound is less likely to be superconductor.

First-principles calculations and experimental studies of Sn-Zn alloys as negative electrode materials for lithium-ion batteries

The physical characters and electrochemical properties of various phases in a Sn-Zn electrode, such as formation energy, plateau potential, specific capacity, as well as volume expansion, were calculated by the first-principles plane-wave pseudo-potential method based on the den- sity functional theory. Sn-Zn films were also deposited on copper foils by an electroless plating technique. The actual composition and chemical characters were explored by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, plasma atomic emission spectrometry （ICP）, and constant current charge/discharge measurements （CC）. The results show that separation phases with tin and zinc including a small quantity of Cu6Sn5 phase were obtained, the initial lithium insertion capacity of the Sn-Zn film was 661 mAh/g, and obvious potential pla- teaus of about 0.4 V and 0.7 V were displayed, which is in accordance with the results of theoretical calculations. The capacity of the Sn-Zn film decreased seriously with the increase of cycle number.

Dissociations of O_2 molecules on ultrathin Pb(111) films:first-principles plane wave calculations

Using first-principles calculations, we systematically study the dissociations of 02 molecules on different ultrathin Pb（lll） films. According to our previous work revealing the molecular adsorption precursor states for O2, we further explore why there are two nearly degenerate adsorption states on Pb（lll） ultrathin films, but no precursor adsorption states existing at all on Mg（0001） and Al（lll） surfaces. The reason is concluded to be the different surface electronic structures. For the O2 dissociation, we consider both the reaction channels from gas-like and molecularly adsorbed O2 molecules. We find that the energy barrier for O2 dissociation from the molecular adsorption precursor states is always smaller than that from O2 gas. The most energetically favorable dissociation process is found to be the same on different Pb（lll） fihns, and the energy barriers are found to be influenced by the quantum size effects of Pb（lll） films.

Mechanical, electronic, and thermodynamic properties of zirconium carbide from first-principles calculations

Mechanical, electronic, and thermodynamic properties of zirconium carbide have been systematically studied using the ab initio calculations. The calculated equilibrium lattice parameter, bulk modulus, and elastic constants are all well consistent with the experimental data. The electronic band structure indicates that the mixture of C 2p and Zr 4d and 4p orbitals around the Fermi level makes a large covalent contribution to the chemical bonds between the C and Zr atoms. The Bader charge analysis suggests that there are about 1.71 electrons transferred from each Zr atom to its nearest C atom. Therefore, the Zr-C bond displays a mixed ionic/covalent character. The calculated phonon dispersions of ZrC are stable, coinciding with the experimental measurement. A drastic expansion in the volume of ZrC is seen with increasing temperature, while the bulk modulus decreases linearly. Based on the calculated phonon dispersion curves and within the quasi-harmonic approximation, the temperature dependence of the heat capacities is obtained, which gives a good description compared with the available experimental data.

Lattice structures and electronic properties of CIGS/CdS interface:First-principles calculations

Using first-principles calculations within density functional theory, we study the atomic structures and electronic properties of the perfect and defective （2VCu＋ Incu） CulnGaSe2/CdS interfaces theoretically, especially the interface states. We find that the local lattice structure of （2VCu＋ InCu） interface is somewhat disorganized. By analyzing the local density of states projected on several atomic layers of the two interfaces models, we find that for the （2VCu＋InCu） interface the interface states near the Fermi level in CulnGaSe2 and CdS band gap regions are mainly composed of interracial Se-4p, Cu-3d and S-3p orbitals, while for the perfect interface there are no clear interface states in the CulnGaSe2 region but only some interface states which are mainly composed of S-3p orbitals in the valance band of CdS region.

Mechanical properties of Mn-doped ZnO nanowires studied by first-principles calculations

First-principles calculations were performed to investigate the mechanical properties of ZnO nanowires and to study the doping and size effects. A series of strains were applied to ZnO nanowires in the axial direction and the elastic moduli of ZnO nanowires were obtained from the energy versus strain curves. Pure and Mn-doped ZnO nanowires with three different diameters （1.14, 1.43, and 1.74 nm） were studied. It is found that the elastic moduli of the ZnO nanowires are 146.5, 146.6, and 143.9 GPa, respectively, which are slightly larger than that of the bulk （140.1 GPa）, and they increase as the diameter decreases. The elastic moduli of the Mn-doped ZnO nanowires are 137.6, 141.8, and 141.0 GPa, which are slightly lower than those of the undoped ones by 6.1%, 3.3%, and 2.0%, respectively. The mechanisms of doping and size effect were discussed in terms of chemical bonding and geometry considerations.

First-principles calculations on elastic, magnetoelastic, and phonon properties of Ni_2FeGa magnetic shape memory alloys

The elastic, magnetoelastic, and phonon properties of Ni2FeGa were investigated through first-principles calculations. The obtained elastic and phonon dispersion curves for the austenite and martensite phases agree well with available the- oretical and experimental results. The isotropic elastic moduli are also predicted along with the polycrystalline aggregate properties including the bulk modulus, shear modulus, Young＇s modulus, and Poisson＇s ratio. The Pugh ratio indicates that Ni2FeGa shows ductility, especially the austenite phase, which is consistent with the experimental results. The Debye tem- peratures of the Ni2FeGa in the austenite and martensite phases are 344 K and 392 K, respectively. It is predicted that the magnetoelastic coefficient is -5.3 x 10^6 J/m3 and magnetostriction coefficient is between 135 and 55 ppm in the Ni2FeGa austenite phase.

Phase transition and thermodynamic properties of BiFeO_3 from first-principles calculations

The first-principles projector-augmented wave method employing the quasi-harmonic Debye model,is applied to investigate the thermodynamic properties and the phase transition between the trigonal R3c structure and the orthorhombic Pnma structure.It is found that at ambient temperature,the phase transition from the trigonal R3c phase to the orthorhombic Pnma phase is a first-order antiferromagnetic-nonmagnetic and insulator-metal transition,and occurs at 10.56 GPa,which is in good agreement with experimental data.With increasing temperature,the transition pressure decreases almost linearly.Moreover,the thermodynamic properties including Grneisen parameter,heat capacity,entropy,and the dependences of thermal expansion coefficient on temperature and pressure are also obtained.

Electronic Structure and Transport Coefficients of the Thermoelectric Materials Bi_2Te_3 from First-principles Calculations

The electronic structures of bulk Bi_2Te_3 crystals were investigated by the first-principles calculations.The transport coefficients including Seeback coefficient and power factor were then calculated by the Boltzmann theory,and further evaluated as a function of chemical potential assuming a rigid band picture.The results suggest that p-type doping in the Bi_2Te_3 compound may be more favorable than n-type doping.From this analysis results,doping effects on a material will exhibit high ZT.Furthermore,we can also find the right doping concentration to produce more efficient materials,and present the ＂advantage filling element map＂ in detail.

Electronic and optical properties of GaN–MoS2 heterostructure from first-principles calculations

Heterostructures(HSs)have attracted significant attention because of their interlayer van der Waals interactions.The electronic structures and optical properties of stacked GaN-MoS2 HSs under strain have been explored in this work using density functional theory.The results indicate that the direct band gap(1.95 e V)of the Ga N-MoS2 HS is lower than the individual band gaps of both the GaN layer(3.48 e V)and the MoS2 layer(2.03 eV)based on HSE06 hybrid functional calculations.Specifically,the GaN-MoS2 HS is a typical type-II band HS semiconductor that provides an effective approach to enhance the charge separation efficiency for improved photocatalytic degradation activity and water splitting efficiency.Under tensile or compressive strain,the direct band gap of the GaN-MoS2 HS undergoes redshifts.Additionally,the GaN-MoS2 HS maintains its direct band gap semiconductor behavior even when the tensile or compressive strain reaches 5%or-5%.Therefore,the results reported above can be used to expand the application of Ga N-MoS2 HSs to photovoltaic cells and photocatalysts.

Comparisons between adsorption and diffusion of alkali,alkaline earth metal atoms on silicene and those on silicane:Insight from first-principles calculations

The adsorption and diffusion behaviors of alkali and alkaline-earth metal atoms on silicane and silicene are both investigated by using a first-principles method within the frame of density functional theory.Silicane is staler against the metal adatoms than silicene.Hydrogenation makes the adsorption energies of various metal atoms considered in our calculations on silicane significantly lower than those on silicene.Similar diffusion energy barriers of alkali metal atoms on silicane and silicene could be observed.However,the diffusion energy barriers of alkali-earth metal atoms on silicane are essentially lower than those on silicene due to the small structural distortion and weak interaction between metal atoms and silicane substrate.Combining the adsorption energy with the diffusion energy barriers,it is found that the clustering would occur when depositing metal atoms on perfect hydrogenated silicene with relative high coverage.In order to avoid forming a metal cluster,we need to remove the hydrogen atoms from the silicane substrate to achieve the defective silicane.Our results are helpful for understanding the interaction between metal atoms and silicene-based two-dimensional materials.

First-Principles Calculations of the Structural, Mechanical and Thermodynamics Properties of Cubic Zirconia

The structural, mechanical and thermodynamics properties of cubic zirconium oxide (cZrO2) were investigated in this study using ab initio or first-principles calculations. Density functional theory was used to optimize the crystal structure of cZrO2 and thereafter, simulations were conducted to predict the lattice parameters and elastic constants. The Zr-O bond distance was calculated as 2.1763 &#197 with unit cell density of 6.4179 g/cm3. The data obtained were used to determine Young’s modulus, bulk modulus, Poisson’s ratio and hardness of cZrO2 as 545.12 GPa, 136.464 GPa, 0.1898 and 12.663(Hv) respectively. The result indicates that cZrO2 is mechanically stable with thermodynamics properties of a refractory material having potential for structural and catalytic applications in various forms as a nanomaterial.

Magnetic properties of several potential rocksalt half-metallic ferromagnets based on the first-principles calculations

Several rocksalt Sr4X3N （X = O, S, Se, and Te） are predicted to be potential half-metallic ferromagnets free of transition-metal and rare-earth elements by performing the first-principles calculations. Then their magnetic properties, such as the half metallicity and the crystal-cell magnetic moments are investigated. The Sr4X3N possibly have higher Curie temperatures and have more stable half metallicity than the Sr4X3C. Their crystal-cell magnetic moments are all 1.00 μB. The crystal-cell magnetic moments and the half metallicity arise mainly from the N ions. The main mechanism is the strong covalent interaction leading to the sp2 hybridized orbitals in the Sr4X3N. Then two Sr-5s and three N-2p electrons enter into three sp2 hybridized orbitals. Among these five electrons, four electrons are paired and one is unpaired, so there are three spin-up electrons and two spin-down electrons in these sp2 hybridized orbitals.

First-principles calculations of structural, electronic, and thermodynamic properties of ZnO_(1-x)S_x alloys

In this study the pseudo-potential method is used to investigate the structural, electronic, and thermodynamic proper- ties of ZnOl_xSx semiconductor materials. The results show that the electronic properties are found to be improved when calculated by using LDA ~ U functional as compared with local density approximation （LDA）. At various concentrations the ground-state properties are determined for bulk materials ZnO, ZnS, and their tertiary alloys in cubic zinc-blende phase. From the results, a minor difference is observed between the lattice parameters from Vegard＇s law and other calculated results, which may be due to the large mismatch between lattice parameters of binary compounds ZnO and ZnS. A small deviation in the bulk modulus from linear concentration dependence is also observed for each of these alloys. The ther- modynamic properties, including the phonon contribution to Helmholtz free energy △F, phonon contribution to internal energy △E, and specific iheat at constant-volume Cv, are calculated within quasi-harmonic approximation based on the calculated phonon dispersion relations.

First-principles calculations of structural and thermodynamic properties of β-PbO

We employed ab-initio calculations to investigate the structural and thermodynamic properties of Massicot or orthorhombic phase of PbO named β-PbO using the projector augmented-wave（PAW） method within the generalized gradient approximation（GGA）. The temperature and pressure dependence of bulk modulus, heat capacity at constant pressure and constant volume, entropy, thermal expansion coefficient and Grüneisen parameter were discussed. Accuracy of two different models, the Debye and Debye-Grüneisen which are based on the quasi-harmonic approximation（QHA） for producing thermodynamic properties of material were compared. According to calculation results, these two models can be used to designate thermodynamic properties for β-PbO with sensible accuracy over a wide range of temperatures and pressures, and our work on the properties of this structure will be useful for more deeply understanding various properties of this structure.

Origin of Photocatalytic Activity of BiPO4： the First-principles Calculations

Geometric and electronic structures of three polymorphs of BiPO4（m MBIP, n MBIP and HBIP） have been investigated by the first-principles calculations. The results show that PO4 tetrahedron in n MBIP is distorted most, and m MBIP possesses minimum effective mass of carriers in three polymorphs of BiPO4. Further, the leading role of inductive effect of dipole moment or effective mass of carries in the separation of electron-hole pairs is analyzed. Based on the fact that n MBIP has higher photocatalytic activity than m MBIP, it can be inferred that the inductive effect of dipole moment deriving from distorted PO4 tetrahedron is the dominant factor affecting the separation efficiency of carries. The calculated results represent that n MBIP has more appropriate redox potential and narrower band gap than others. These findings may provide meaningful guidance for further understanding on the relationship between unique crystal structure and photocatalytic activity of BiPO4.

Boron diffusion in bcc-Fe studied by first-principles calculations

The diffusion mechanism of boron in bcc-Fe has been studied by first-principles calculations. The diffusion coefficients of the interstitial mechanism, the B-monovacancy complex mechanism, and the B-divacancy complex mechanism have been calculated. The calculated diffusion coefficient of the interstitial mechanism is DO = 1.05 x l0-7 exp （-0.75 eV/kT） m2. s-1, while the diffusion coefficients of the B-monovacancy and the B-divacancy complex mechanisms are D1 =1.22 x 10-6fl exp （-2.27 eV/kT） mE. s-1 and D2 - 8.36 x 10-6 exp （-4.81 eV/kT） m2. s-l, re- spectively. The results indicate that the dominant diffusion mechanism in bcc-Fe is the interstitial mechanism through an octahedral interstitial site instead of the complex mechanism. The calculated diffusion coefficient is in accordance with the reported experiment results measured in Fe-3%Si-B alloy （bcc structure）. Since the non-equilibrium segregation of boron is based on the diffusion of the complexes as suggested by the theory, our calculation reasonably explains why the non-equilibrium segregation of boron is not observed in bcc-Fe in experiments.

Accurate calculations of the high-pressure elastic constants based on the first-principles

The energy term corresponding to the first order of the strain in Taylor series expansion of the energy with respect to strain is always ignored when high-pressure elastic constants are calculated. Whether the modus operandi would affect the results of the high-pressure elastic constants is still unsolved. To clarify this query, we calculate the high-pressure elastic constants of tantalum and rhenium when the energy term mentioned above is considered and neglected, respectively.Results show that the neglect of the energy term corresponding to the first order of the strain indeed would influence the veracity of the high-pressure elastic constants, and this influence becomes larger with pressure increasing. Therefore, the energy term corresponding to the first-order of the strain should be considered when the high-pressure elastic constants are calculated.

First-principles calculations on Si(220) located 6H–SiC(10■0)surface with different stacking sites

6H-SiC （1010） surface and Si （220）/6H-SIC （1010） interface with different stacking sites are investigated using first-principles calculations. Surface energies of 6H-SiC （1010） （case I, case II, and case III） are firstly studied and the surface calculation results show that case II and case III are more stable than case I. Then, the adhesion energies, fracture toughness values, interfacial energies, densities of states, and electronic structures of Si （220）/6H-SIC （1010） interfaces for three stacking models （AM, BM, and CM） are calculated. The CM model has the highest adhesion energy and the lowest interracial energy, suggesting that the CM is stronger and more thermodynamically stable than AM and BM. Densities of states and the total charge densities give evidence that interfacial bonding is formed at the interface and that Si-Si and Si-C are induced due to the hybridization of C-2p and Si-3p. Moreover, the Si-C is much stronger than Si-Si at the interface, implying that the contribution of the interfacial bonding mainly comes from Si-C rather than Si-Si.