Superior and safer lithium sulfur batteries realized by robust polysulfides-retarding dam with high flame retardance

The unparalleled energy density has granted lithium-sulfur batteries(LSBs)with attractive usages.Unfortunately,LSBs still face some unsurpassed challenges in industrialization,with polysulfides shuttling,dendrite growth and thermal hazard as the major problems triggering the cycling instability and low safety.With the merit of convenience,the method of designing functional separator has been adapted.Concretely,the carbon aerogel confined with CoS_(2)(CoS_(2)-NCA)is constructed and coated on Celgard separator surface,acquiring CoS_(2)-NCA modified separator(CoS_(2)-NCA@C),which holds the promoted electrolyte affinity and flame retardance.As revealed,CoS_(2)-NCA@C cell gives a high discharge capacity 1536.9 mAh/g at 1st cycle,much higher than that of Celgard cell(987.1 mAh/g).Moreover,the thermal runaway triggering time is dramatically prolonged by 777.4 min,corroborating the promoted thermal safety of cell.Noticeably,the higher coulombic efficiency stability and lower overpotential jointly confirm the efficacy of CoS_(2)-NCA@C in suppressing the lithium dendrite growth.Overall,this work can provide useful inspirations for designing functional separator,coping with the vexing issues of LSBs.

Synthesis of Organic-Inorganic Hybrid Aluminum Hypophosphite Microspheres Flame Retardant and Its Flame Retardant Research on Thermoplastic Polyurethane

Aluminum hypophosphite microspheres(AHP) were synthesized by hydrothermal method using NaH2PO2·H2O and AlCl3·6H2O as raw materials, and then the AHP microspheres were polymerized by surface polymerization of micro-nanospheres with cyclic cross-linked poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol)(PZS). A new organic-inorganic poly(phosphonitrile)-modified aluminum hypophosphite microspheres(PZS-AHP) were synthesized by encapsulation and applied to flame retardant thermoplastic polyurethane(TPU). The microstructure and chemical composition of the PZS-AHP microsphere were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray spectroscopy. The thermal stability of PZS-AHP microsphere was explored with thermogravimetric analysis. Thermogravimetric data indicate that the PZS-AHP microspheres have excellent thermal stability. The thermal and flame-retarding properties of the TPU composites were evaluated by thermogravimetric(TG), limited oxygen index tests(LOI), and cone calorimeter test(CCT). The TPU composite achieved vertical burning(UL-94) V-0 grade and LOI value reached 29.2% when 10 wt% PZS-AHP was incorporated. Compared with those of pure TPU, the peak heat release rate(pHRR) and total heat release(THR) of TPU/10%PZS-AHP decreased by 82.2% and 42.5%, respectively. The results of CCT indicated that PZS-AHP microsphere could improve the flame retardancy of TPU composites.

Ten-Minute Synthesis of a New Redox-Active Aqueous Binder for Flame-Retardant Li-S Batteries

As a critical role in battery systems,polymer binders have been shown to efficiently suppress the lithium polysulfide shuttling and accommodate volume changes in recent years.However,preparation processes and safety,as the key criterions for Li-S batteries'practical applications,still attract less attention.Herein,an aqueous multifunction binder(named PEI-TIC)is prepared via an easy and fast epoxy-amine ring-opening reaction(10 min),which can not only give the sulfur cathode a stable mechanical property,a strong chemical adsorption and catalytic conversion ability,but also a fire safety improvement.The Li-S batteries based on the PEI-TIC binder display a high discharge capacity(1297.8 mAh g^(-1)),superior rate performance(823.0 mAh g^(-1)at 2 C),and an ultralow capacity decay rate of 0.035%over more than 800 cycles.Even under 7.1 mg cm^(-2)S-loaded,the PEI-TIC electrode can also achieve a high areal capacity of 7.2 mA h g^(-1)and excellent cycling stability,confirming its application potential.Moreover,it is also noted that TG-FTIR test is performed for the first time to explore the flame-retardant mechanism of polymer binders.This work provides an economically and environmentally friendly binder for the practical application and inspires the exploration of the flame-retardant mechanism of all electrode components.

Biobased Furfurylated Poplar Wood for Flame-Retardant Modification with Boric Acid and Ammonium Dihydrogen Phosphate

Furfurylated wood exhibits excellent dimensional stability and corrosion resistance,making it a promising material for constructing buildings,but it is highly flammable.Herein,flame-retardant furfurylated poplar wood was produced via a two-step process utilizing boric acid(BA)and ammonium dihydrogen phosphate(ADP)as flame-retardant components,and biomass-derived furfuryl alcohol(FA)as a modifier.The acidity of BA and ADP allowed them to catalyze the polymerization of FA,which formed a cross-linked network that immobilized BA and ADP inside the wood.The addition of BA/ADP substantially delayed the time to ignition from 10 to 385 s and reduced the total heat release and total smoke release by 58.75%and 77.31%,respectively.Analysis of the pyrolysis process showed that the decomposition products of BA and ADP protected the underlying furfurylated wood and diluted combustible gases.This method significantly improved the fire retardancy and smokeless properties of furfurylated wood,providing promising prospects for its application as an engineering material.

Study on the Flame-retardant Properties of High Flame-retardant Acrylic Fiber Knitted Fabrics

This paper involved five kinds of weft-knitted fabrics made from high flame-retardant acrylic/cotton(0/100,30/70,50/50,70/30,100/0).The article adopted the vertical burning method,limiting oxygen index method and Cone Calorimeter test method for testing fabric flame retardant property.By comparison with these five fabrics,the effects on the properties of high flame-retardant acrylic fiber knitted fabrics due to the content of high flame-retardant acrylic fiber were analyzed.

Research Progress on a Novel Brominated Flame Retardant :Tris(2,3- dibromopropyl) Isocyanurate(TBC)

This review summarizes the environmental levels,toxicity effects and analytical development of Tris(2,3-dibromopropyl)Isocyanurate(TBC).Further study is required on the environmental behavior of TBC,mechanism of toxicity and alternative development.

Synthesis and Application of Novel Triazine-Based Charring-Foaming Agents in Intumescent Flame Retardant Polypropylene

Three novel triazine-based charring-foaming agents (M2-CFA, M4-CFA, and M6-CFA) were synthesized successfully with only water as the solvent and were characterized by FT-IR and thermal gravimetric analysis (TGA). These three charring-foaming agents and the byproduct 944-by were employed to study the effectiveness of the novel intumescent flame retardant dopant on the fire retardancy of polypropylene(PP) investigated through UL-94 and limiting oxygen index (LOI) tests. TGA results showed that the M4-CFA presented good char formation ability (char residue: 26.8% at 700 °C). It was found that the sample with a 2/1 mass ratio of APP to M4-CFA exhibited the best flame retardancy among all the PP composites: 35.5% LOI and a V-0 rating of UL-94. Additionally, the microstructure and morphology of char residues were further studied by XRD, Raman spectroscopy and SEM. © 2017, Tianjin University and Springer-Verlag Berlin Heidelberg.

Synthesis and thermal stability of a novel phosphorus-nitrogen containing intumescent flame retardant

A novel phosphorus-nitrogen containing intumescent flame retardant （P-N IFR） was prepared via the reaction of dichlor-opentate with N-methylaniline. The structure of the product was confirmed by ^1H NMR, ^31p NMR, MS and IR. TGA analysis showed it has effective thermal stability.

Non-covalently Functionalized Graphene Oxide-Based Coating to Enhance Thermal Stability and Flame Retardancy of PVA Film

The synergistic effect of conventional flame-retardant elements and graphene has received extensive attention in the development of a new class of flame retardants. Compared to covalent modification, the noncovalent strategy is simpler and expeditious and entirely preserves the original quality of graphene. Thus, non-covalently functionalized graphene oxide(FGO) with a phosphorus–nitrogen compound was successfully prepared via a one-pot process in this study. Polyethyleneimine and FGO were alternatively deposited on the surface of a poly(vinyl alcohol)(PVA) film via layer-by-layer assembly driven by electrostatic interaction, imparting excellent flame retardancy to the coated PVA film. The multilayer FGO-based coating formed a protective shield encapsulating the PVA matrix, effectively blocking the transfer of heat and mass during combustion. The coated PVA has a higher initial decomposition temperature of about 260 °C and a nearly 60% reduction in total heat release than neat PVA does. Our results may have a promising prospect for flame-retardant polymers.

Preparation and characterization of tung oil-based flame retardant polyols

Three kinds of tung oil-based structural flame retardants polyols(TOFPs) were prepared by new methods in this paper. First, tung oil was used to produce monoglyceride and diglyceride by transesterification with glycerol by sodium methoxide. The products after transesterification were epoxidized by peracetic acid which was in-situ generated from acetic acid and hydrogen peroxide in the presence of sulfuric acid catalyst. And then, TOFPs were prepared from epoxidized alcoholysis tung oil(EGTO) with 9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO), diethyl phosphate(DEP) and diethanolamine(DEA) by ring-opening reactions, respectively. GPC was used to evaluate the conversion rate, at optimum reaction conditions, selectivity for monoglyceride in transesterification. The influence of different parameters such as temperature, mole ratio or mass ratio on the conversion rate of transesterification and epoxidation were investigated. The molecular structures of TOFPs were characterized by FTIR and ~1HNMR. Finally, tung oil-based polyurethane foams(TOPUFs) were prepared by a one-shot process using TOFPs with polyisocyanate. The LOI values of TOPUFs whose content of DOPO-EGTO,DEP-EGTO and DEA-EGTO were 100 wt% can reach to 26.2%, 25.1%, and 24.4%, respectively.

STUDIES ON FLAME-RETARDANT PC/ABS MULTIPLE-ELEMENT ALLOY

The preparation technology of flame-retardant PC/ABS alloys was studied in this paper. Using a high-efficiency flame retardant system and by means of multiple-ingredient compatibilizing, PC/ABS alloys with excellent impact strength and flame retardant property were prepared. The experimental results showed that by using PS-g-MAH and SMA as synergistic compatibilizers, the notched Izod impact strength and flammability of PC/ABS alloy obtained in the present work can be up to 175 J/m and UL-94 VO, respectively.

Preparation of Polyurea Elastomer with Flame Retardant, Insulation and Thermal Conductivity Properties

By using 6,6-((sulfonylbis(4,1-phenylene)bis(azanediyl))bis(thiophen-2-ylm-ethylene))bis6H-di-benzo[c,e][1,2]oxaphosphinine 6-oxide(DOPO-N)as phosphorus-nitrogen flame retardant,the polyurea(PUA)with flame retardant properties(PUA/DOPO-N)was prepared.In addition,organically modified montmorillonite(OMMT)and magnesium hydroxide(MH)were used as co-effectors respectively,and the flame retardant PUA(PUA/DOPO-N/OMMT and PUA/DOPO-N/MH)were also prepared.Thermal properties,flame retardant properties,flame retardant mechanism and mechanical properties of PUA/DOPO-N,PUA/DOPO-N/OMMT and PUA/DOPO-N/MH were investigated by thermogravimetric(TG)analysis,limiting oxygen index(LOI),UL 94,cone calorimeter test,scanning electron microscopy(SEM),and tensile test.The results show that the LOI value of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are 27.1%,27.7%,and 28.3%,respectively,and UL 94 V-0 rating is attained.Compared with PUA,the peak heat release rate(pk-HRR),total heat release(THR)and average effective heat combustion(av-EHC)of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH decrease significantly.SEM results indicate that the residual chars of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are completer and more compact.The complex of DOPO-N/OMMT and DOPO-N/MH have synergistic flame retardancy.The mechanical properties of PUA can be improved by the addition of DOPO-N,DOPO-N/OMMT and DOPO-N/MH,respectively.The insulation performance test shows that the volume resistivity of PUA/20%DOPO-N is 6.25×10^(16)Ω.cm.Furthermore,by using modified boron nitride(MBN)as heat dissipating material,the complex of PUA/MBN was prepared,and the thermal conductivity of PUA/MBN was investigated.The thermal conductivity of PUA/8%MBN complex coating at room temperature is 0.166 W/(M·K),which is a 163%improvement over pure PUA.

Flame-retardant concentrated electrolyte enabling a Li F-rich solid electrolyte interface to improve cycle performance of wide-temperature lithium–sulfur batteries

Lithium–sulfur batteries have been regarded as the most promising high-energy electrochemical energy storage device owing to the high energy density, low cost and environmental friendliness. However, traditional lithium–sulfur batteries using ether-based electrolytes often suffer from severe safety risks(i.e. combustion). Herein, we demonstrated a novel kind of flame-retardant concentrated electrolyte(6.5 M lithium bis(trifluoromethylsulphonyl)imide/fluoroethylene carbonate) for highly-safe and widetemperature lithium–sulfur batteries. It was found that such concentrated electrolyte showed superior flame retardancy, high lithium-ion transference number(0.69) and steady lithium plating/stripping behavior(2.5 m Ah cm^(-2) over 3000 h). Moreover, lithium–sulfur batteries using this flame-retardant concentrated electrolyte delivered outstanding cycle performance in a wide range of temperatures(-10 °C, 25 °C and 90 °C). This superior battery performance is mainly attributed to the LiF-rich solid electrolyte interphase formed on lithium metal anode, which can effectively suppress the continuous growth of lithium dendrites. Above-mentioned fascinating characteristics would endow this flame-retardant concentrated electrolyte a very promising candidate for highly-safe and wide-temperature lithium–sulfur batteries.

Flame Retardancy of Epoxy Resin/β-cyclodextrin@Resorcinol Bisdiphenylphosphate Inclusion Composites

In order to improve the efficiency of β-CD,the inclusion complex of β-CD and resorcinol bisdiphenylphosphate (RDP) (β-CD@RDP) was prepared,which β-CD was as the host component and RDP was as the guest.The structure and thermal stability property of β-CD@RDP was also characterized.EP/β-CD@RDP composites were prepared by adding β-CD@RDP into EP matrix.The results of thermogravimetric test showed that the flame retardant systems could effectively increase the corresponding temperature of EP matrix to reach the maximum thermal decomposition rate,and exhibited good char-forming property.When the amount of β-CD@RDP in EP was 20wt%,the limiting oxygen index (LOI) value of EP was increased to 26.5% from 19.8%,and the vertical burning test (UL-94) reached V-1 level.The cone calorimeter test indicated that 20wt% loading in EP could reduce the peak of heat release rate (PHRR) and the total heat release (THR) of EP by 94.7% and 93.4% respectively,and the peak of smoke production rate (PSPR) and the total smoke production (TSP) was reduced by 16.7% and 22.2%,respectively.Therefore,the addition of β-CD@RDP could reduce the fire risk of EP effectively.

Preparation and Properties of Bio-Based Flame Retardant Polyvinyl Alcohol

Polyvinyl alcohol (PVA) has been widely used in the fields of medical, food and packaging due to its excellentbiocompatibility, good fiber-forming and film-forming properties. However, the high flammability of PVA hasgreatly limited its wider applications. The flame-retardant PVA was prepared by melt blending of a bio-basedflame retardant (prepared from lignin, phosphoric acid and carbamide) with thermoplastic PVA (TPVA). Thechemical structure, morphology, thermal properties, mechanical properties, fire property and fluidity of thisflame retardant PVA were investigated by Fourier transform infrared spectrometer(FTIR), field emission scanning electron microscope(SEM), thermogravimetric analyzer(TGA), impact tester, universal testing machine,horizontal-vertical burning tester, limiting oxygen indexer(LOI) and melt flow rate meter(MFR). The resultsshowed that the prepared flame retardant had good compatibility with the PVA substrate;The impact strength,melt flow rate, fire property and char residue of this PVA material increased with the content of bio-based flameretardant. When the content of flame retardant was of 20%, the five indices including impact strength, meltflow rate, UL-94 level, LOI and char residual were 11.3 KJ/m^(2), 21.2 g/10 min, V-0 UL-94 level, 33.1%, and19.2%, respectively. This research can promote the high-value utilization of lignin and the application ofPVA in the fields of fire protection.

A novel high-efficient P/N/Si-containing APP-based flame retardant with a silane coupling agent in its molecular structure for epoxy resin

A flame retardant containing multiple antiflaming elements usually exhibits high-efficient flame retardancy. Here, a novel P/N/Si-containing ammonium polyphosphate derivative(APTES-APP) is synthesized from ammonium polyphosphate(APP) and silane coupling agent(3-aminopropyl)triethoxysilane(APTES)via cation exchange, which is quite different in the chemical structure from APTES-modified APP for retaining silicon hydroxyls. APTES-APP is highly efficient for the epoxy resin. 8%(mass) APTES-APP imparts excellent flame retardancy to the epoxy resin, with a V-0 rating at the UL-94 test(1.6 mm)and an LOI value of 26%(vol). The peak heat release rate and total smoke production of the flameretardant epoxy resin are decreased by 68.1% and 31.3%, respectively. The synergy of P/N/Si contributes to the well-expanded char residue with a strong and dense surface layer, which is a very good barrier against heat and mass transfer. Besides, there is no significant deterioration in the mechanical properties of flame-retardant epoxy resin thanks to silicon hydroxyls forming hydrogen bonds with epoxy molecules. Meanwhile, other molecules can be grafted onto APTES-APP via these silicon hydroxyls, if needed.Briefly, this work has developed a new strategy for amino silane as flame retardants. In conjunction with a low-cost and simple preparation method, APTES-APP has a promising prospect in the high-performance flame-retardant epoxy.

Intumescent Flame-retardant Modification of Polypropylene/Carbon Fiber Composites

To improve the flame resistance of polypropylene(PP)/carbon fiber(CF)composite materials,triazine char-forming agent(TCA)was compounded with ammonium polyphosphate(APP)or modified APP(CS-APP)in a 2:1 ratio to prepare intumescent flame retardant(IFR)and the modified intumescent flame retardant(CS-IFR)in this paper.Flame retardancy and thermal degradation behaviors of the composites modified by IFR and CS-IFR were characterized by Fourier Transform Infrared(FTIR),contact angle measurement,oxygen index(OI),vertical burning tests(UL-94),thermogravimetric analyer(TGA),and thermogravimetric analyzer coupled with Fourier transform infrared(TG-FTIR).It was found that 25.0 phr of IFR and 24.0 phr of CS-IFR could improve the LOI value of PP/CF composites to 28.3%and 28.9%,respectively.At the same time,a UL-94 V-0 rating was achieved.The experimental results show that the IFR and CS-IFR prepared could effectively improve the flame retardancy and thermostability of PP/CF composites,and they would greatly expand the application range of PP/CF composite materials.

Tribological and flame retardant modification of polyamide-6 composite

A series of wear and flame resistant polyamide 6(PA6)composites were prepared using glass fiber(GF)and talc(T)as reinforcer,polytetrafluoroethylene(PTFE)and graphite(Gr)as solid lubricants,red phosphorus(RP)and zinc borate(ZB)as flame retardant.The tribological property,mechanical property,flame retardant property and the flame retardant mechanism were investigated.The tests show that the formula of the wear resistant PA6 composite(WRPA 6)is PA6/GF/T/PTFE/Gr in the ratio of 100/15/5/10/5 by mass.Because this composite exhibits the lowest friction coefficient(0.1429)and no wear mass loss,the introduction of RP and ZB can increase the flame resistance of WRPA6,and the synergistic effect of RP and ZB is obtained.Detailedly,the composite with 4 parts of ZB and 12 parts of RP shows the best flame retardant property,achieving the highest limiting oxygen index(LOI)(30.2 vol%)and a UL94 V-0 rating,and the flame retardant mechanisms may be gas phase along with condense phase mechanism.

Superior Mechanical Behavior and Flame Retardancy FRP via a Distribution Controllable 1D/2D Hybrid Nanoclay Synergistic Toughening Strategy

The incorporation of commercial flame retardants into fiber-reinforced polymer(FRP)composites has been proposed as a potential solution to improve the latter’s poor flame resistance.However,this approach often poses a challenge,as it can adversely affect the mechanical properties of the FRP.Thus,balancing the need for improved flame resistance with the preservation of mechanical integrity remains a complex issue in FRP research.Addressing this critical concern,this study introduces a novel additive system featuring a combination of one-dimensional(1D)hollow tubular structured halloysite nanotubes(HNTs)and two-dimensional(2D)polygonal flake-shaped nano kaolinite(NKN).By employing a 1D/2D hybrid kaolinite nanoclay system,this research aims to simultaneously improve the flame retardancy and mechanical properties.This innovative approach offers several advantages.During combustion and pyrolysis processes,the 1D/2D hybrid kaolinite nanoclay system proves effective in reducing heat release and volatile leaching.Furthermore,the system facilitates the formation of reinforcing skeletons through a crosslinking mechanism during pyrolysis,resulting in the development of a compact char layer.This char layer acts as a protective barrier,enhancing the material’s resistance to heat and flames.In terms of mechanical properties,the multilayered polygonal flake-shaped 2D NKN plays a crucial role by impeding the formation of cracks that typically arise from vulnerable areas,such as adhesive phase particles.Simultaneously,the 1D HNT bridges these cracks within the matrix,ensuring the structural integrity of the composite material.In an optimal scenario,the homogeneously distributed 1D/2D hybrid kaolinite nanoclays exhibit remarkable results,with a 51.0%improvement in mode II fracture toughness(GIIC),indicating increased resistance to crack propagation.In addition,there is a 34.5%reduction in total heat release,signifying improved flame retardancy.This study represents a significant step forward in the field of composite materials.The innovative use of hybrid low-dimensional nanomaterials offers a promising avenue for the development of multifunctional composites.By carefully designing and incorporating these nanoclays,researchers can potentially create a new generation of FRP composites that excel in both flame resistance and mechanical strength.

AN EVA/UNMODIFIED NANO-MAGNESIUM HYDROXIDE/SILICONE RUBBER NANOCOMPOSITE WITH SYNERGISTIC FLAME RETARDANCY

A novel EVA/unmodified nano-magnesium hydroxide （NMH）/silicone rubber ternary nanocomposite was prepared by using a special compound flame retardant of NMH and silicone rubber （CFR）. The flammability of the ternary composite was studied by cone calorimeter test （CCT）. Synergistic effect on flame retardancy was found between silicone rubber and NMH. EVA/CFR ternary nanocomposite showed the lowest peak heat release rate （PHRR） and mass loss rate （MLR） among the samples of virgin EVA, EVA composites. The synergistic flame retardancy of silicone rubber and NMH in EVA system is attributed to the enhanced char layers in the condensed phase that prevents the heat and mass transfer in the fire.