Flow Properties of Turbulent Fiber Suspensions in a Stock Pump Impeller

A numerical method for predicting fiber orientation is presented to explore the flow properties of turbulent fiber suspension flowing through a stock pump impeller. The Fokker-Planck equation is used to describe the distribution of fiber orientation. The effect of flow-fiber coupling is considered by modifying the constitutive mode.The three-dimensional orientation distribution function is formulated and the corresponding equations are solved in terms of second-order and fourth-order orientation tensors. The evolution of fiber orientation, flow velocity and pressure, additional shear stress and normal stress difference are presented. The results show that the evolutions of fiber orientation are different along different streamlines. The velocity and its gradient are large in the concave wall region, while they are very small in the convex wall region. The additional shear stress and normal stress difference are large in the inlet and concave wall regions, and moderate in the mid-region, while they are almost zero in most downstream regions. The non-equilibrium fiber orientation distribution is dominant at the inlet and the concave wall regions. The flow will consume more energy to overcome the additional shearing losses due to fibers at the inlet and the concave wall regions. The change of flow rates has effect on the distribution of additional shear stress and normal stress difference. The flow structure in the inlet and concave wall regions is essential in the resultant rheological properties of the fiber suspension through the stock pump impeller, which will directly affect the flow efficiency of the fiber suspension through the impeller.

Characterization of powder flow properties from micron to nanoscale using FT4 powder rheometer and PT-X powder tester

The rapid development of nanotechnology has led to a need to further understand the physical char-acteristics of nanoparticles.In this paper,the flow characteristics of micro-nano alumina particles with different particle sizes were characterized.The FT4 powder rheometer and the PT-X powder tester were used to measure the compression,friction,and dynamic properties of powders.Powder compressibility increased significantly as the particle size decreased from 27 μm to 30 nm.Pressure distribution in the silo was measured and predicted by Janssen's theory,with errors mostly less than 10%.The basic flow energy and the specific energy of the three powders were 4983,1734,and 244 mJ,and 6.80,11.70,and 6.70 mJ/g,respectively,indicating that there was no linear relationship between the change in flowability and particle size.The dynamic properties of the powders change from particle-dominated to agglomeration-dominated as the particle size decreases.The conclusion is supported by the results of field emission scanning electron microscopy.

FLOW PROPERTIES OF COHESIVE NANOPOWDERS

The fundamentals of cohesive powder consolidation and flow behaviour using a reasonable combination of particle and continuum mechanics are explained. By means of the model 搒tiff particles with soft contacts? the influ-ence of elastic-plastic repulsion in particle contacts is demonstrated. With this as the physical basis, the stationary yield locus, instantaneous yield loci and consolidation loci, flow function and compression function are presented. The flow properties of a very cohesive titania nanopowder (dS=200 nm) are shown. These models are used to evaluate shear cell test results as constitutive functions for computer aided apparatus design for reliable powder flow.

Aerodynamic and solid flow properties for flaxseeds for pneumatic separation by using air stream

This study aimed to develop simple empirical equations to predict flaxseeds properties.The first part of the present study deals with the physical,aerodynamic and solid flow properties of flaxseeds which are evaluated as a function of change in moisture content from 8.60%to 23.90%dry basis(d.b.),the dimensions of the length,width and thickness varied from 4.14 to 4.32 mm,2.03 to 2.13 mm and 0.88 to 0.93 mm,respectively.As the moisture content increased from 8.60%to 23.90%d.b.,the bulk density,true density and porosity were found to decrease from 46.65 to 44.89 kg/m3;1244 to 1176 kg/m3 and 46.65%to 44.89%,whereas angle of repose and terminal velocity were found to increase from 27.60 to 35.80 and 2.46 to 3.56 m/s,respectively.The static coefficient of friction on various surfaces,namely,plywood,stainless steel,galvanized iron,iron and internal also increased linearly with the increase in moisture content.The results of the experimental investigation may help to optimize some engineering parameters of separation equipment.The second part was carried out on a series of experiments to specify the optimum conditions of separating operation which insure the highest grade of separation efficiency with minimum losses.Pneumatic separation equipment was manufactured and tested under different combinations of the following factors:air stream velocity,feed rate and sample moisture content.The performance of the equipment was evaluated by using the indices separation efficiency and percentage of seed losses.The results of the equipment performances showed that the combinations of air stream velocity,feed rate and sample moisture content affected significantly the separation efficiency and grain losses.Air stream velocity of 2-6 m/s combined with 8.5 kg/h.feed rate and 8.6%moisture content can be considered the most favorable combination values of these variables.They gave the highest grades of separation efficiency and the minimum grain losses.

Effect of nanocomposite as pour point depressant on the cold flow properties and crystallization behavior of diesel fuel

The high effective nano-hybrid pour point depressant(PPD)has attracted extensive attention for its po-tential application in improving the cold flow properties of diesel fuel.In this paper,the nano-hybrid PPD was prepared by melt-blending method using three different alkyl chain lengths(i.e.,tetradecyl,hexade-cyl,and octodecyl)of n-alkyl methacrylate-maleic anhydride copolymers(R 1 MC-MA,R 1=C_(14),C_(16),C_(18))and SiO_(2)nanoparticles.The effect of those nano-hybrid PPDs on the cold filter plugging point(CFPP)and solidifying point(SP)depressing of diesel fuel were studied.Results indicated that nano-hybrid PPD showed much better performance on diesel fuel.The diesel fuel treated with 0.2 wt%C_(14)MC-MA/SiO_(2)nano-hybrid PPD exhibited the best depression in CFPP and SP by 6℃ and 18℃,respectively,which higher than that of single C 14 MC-MA.Viscosity-temperature curves and polarized optical microscopy were conducted to explore the performance mechanism;and results presented that nano-hybrid PPD of C_(14)MC-MA/SiO_(2)could effectively lower the low-temperature viscosity,and modify the crystallization behavior and crystal morphology of diesel.Therefore,the cold flow properties of diesel were significantly improved.

Flow properties of fine powders in powder coating

Three types of nanoparticles and their combinations were blended into a fine powder, which has been used in the powder coating industry. To study their effects on flow properties, the modified powder samples were characterized using a variety of techniques that tested the powder under different powder states ranging from dynamic to static. It was found that all three nanoparticles improved the flow properties of the powder to some degree, though the amounts of the nanoparticles needed were different depending on their physical properties. Secondly, inconsistency among these powder characterization techniques was also found. This is attributed to the different states of the powder samples during a measurement including dynamic, dynamic-static and static states. It was confirmed that characterization techniques which test the flow properties of a powder under all three states are needed to fully describe the flow properties of the powder. Finally, the effects of combinations of nanoparticles were explored, and it was found that combinations of nanoparticles can intensify, weaken or combine the effects of their component nanoparticles. The effects of nanoparticle combinations are not a simple summation of the effects of their comnonent nanoparticles.

Influence of core sand properties on flow dynamics of core shooting process based on experiment and multiphase simulation

The influence of core sand properties on flow dynamics was investigated synchronously with various core sands, transparent core-box and high-speed camera. To confirm whether the core shooting process has significant turbulence, the flow pattern of sand particles in the shooting head and core box was reproduced with colored core sands. By incorporating the kinetic theory of granular flow(KTGF), kinetic-frictional constitutive correlation and turbulence model, a two-fluid model(TFM) was established to study the flow dynamics of the core shooting process. Two-fluid model(TFM) simulations were then performed and a areasonable agreement was achieved between the simulation and experimental results. Based on the experimental and simulation results, the effects of turbulence, sand density, sand diameter and binder ratio were analyzed in terms of filling process, sand volume fraction(αs) and sand velocity(Vs).

Improving cold flow properties of palm fatty acid distillate biodiesel through vacuum distillation

Palm fatty acid distillate(PFAD),a by-product of refining process of crude palm oil can be used as a potential feedstock for biodiesel production.However,the application of palm oil-based biodiesel is often hinder by its poor cold flow properties(CFP).Biodiesel fuel with poor CFP may crystallize and result in clogging of fuel lines,filters and injectors that cause engine operability problems.For that,a vacuum distillation method was designed and its feasibility and efficiency in improving the CFP was examined.A total of 13.60wt%of total saturated fatty acid methyl esters were successfully removed from the PFAD biodiesel,resulting in the improvement of the cloud point(CP),cold filter plugging point(CFPP)and pour point(PP)of PFAD biodiesel from 20℃,19℃,and 15℃to 13℃,11℃,and 9℃,respectively.It is remarkable that the improved CFPP satisfied the requirements for grade C summer biodiesel for temperate climates in EN 14212 standard.Additionally,Sarin(U FAME)empirical correlation was evaluated and it was found to have a good prediction of CFP for PFAD biodiesel,with lower than 2℃deviation.

Experimental Study on Engineering Behavior of Solidified Soil for Scour Repair and Protection

A new scour countermeasure using solidified slurry for offshore foundation has been proposed recently.Fluidized solidified slurry is pumped to seabed area around foundation for scour protection or pumped into the developed scour holes for scour repair as the fluidized material solidifies gradually.In the pumping operation and solidification,the engineering behaviors of solidified slurry require to be considered synthetically for the reliable application in scour repair and protection of ocean engineering such as the pumpability related flow value,flow diffusion behavior related rheological property,anti-scour performance related retention rate in solidification and bearing capacity related strength property after solidification.In this study,a series of laboratory tests are conducted to investigate the effects of mix proportion(initial water content and binder content)on the flow value,rheological properties,density,retention rate of solidified slurry and unconfined compressive strength(UCS).The results reveal that the flow value increases with the water content and decreases with the binder amount.All the solidified slurry exhibits Bingham plastic behavior when the shear rate is larger than 5 s^(-1).The Bingham model has been employed to fit the rheology test results,and empirical formulas for obtaining the density,yield stress and viscosity are established,providing scientific support for the numerical assessment of flow and diffusion of solidified slurry.Retention rate of solidified slurry decreases with the water flow velocity and flow value,which means the pumpability of solidified slurry is contrary to anti-scour performance.The unconfined compressive strength after solidification reduces as the water content increases and binder content decreases.A design and application procedure of solidified soil for scour repair and protection is also proposed for engineering reference.

Microstructures and mechanical properties of Mg-Al-Sm series heat-resistant magnesium alloys

The microstructures and phase compositions of the as-cast and die-cast Mg-6.02Al-1.03 Sm, Mg-6.05Al-0.98Sm-0.56 Bi and Mg-5.95Al-1.01Sm-0.57 Zn alloys were investigated. Meanwhile, the tensile mechanical and flow properties were tested. The results show that the as-cast microstructure of Mg-6.02Al-1.03 Sm alloy is composed of δ-Mg matrix, discontinuous δ-Mg17Al12 phase and small block Al2 Sm phase with high thermal stability. Rod Mg3Bi2 phase precipitates when Bi is added, while the added metal Zn dissolves into δ-Mg matrix and δ-Mg17Al12 phase. The as-cast alloys exhibit the excellent tensile mechanical property. The tensile strength（δb） and elongation（δ） can reach 205-235 MPa and 8.5%-16.0% at ambient temperature, respectively. Meanwhile, they can also exceed 160 MPa and 14.0% at 423 K, respectively. The die-cast microstructures are refined obviously, and meanwhile the broken second phases distribute dispersedly. The die-cast alloys exhibit better tensile mechanical properties with the values of δb and δ of 240-285 MPa and 8.5%-16.5% at ambient temperature, respectively, and excellent flow property with the flow length of 1870-2420 mm. The die-cast tensile fractures at ambient temperature exhibit a typical character of ductile fracture.

Investigation on synergistic deposition of wax and hydrates in waxy water-in-oil(W/O) flow systems

Elucidating the synergistic effect of wax and hydrates, involving formation, aggregation and deposition,is imperative to the operation and transportation safety for offshore petroleum fields. To understand the characteristics and mechanism of synergistic deposition of wax and hydrates, flow and deposition experiments of systems with different wax contents(0-2.89 wt%), initial flow rates, pressures and temperatures were conducted in a high pressure visual flow loop. According to the flow rate and pressure drop data as well as the visual window observation, four different types of plugging scenarios of waxhydrate coexisting systems with different flow properties and wall deposition state were summarized,including rapid plugging, transition plugging, gradual plugging type I and gradual plugging type II.Compared with the wax-free system after hydrate formation, even with the addition of anti-agglomerant(AA) with the same concentration, wax-hydrate coexisting systems could not reach stable hydrate slurry flow state, indicating that the existence of wax deteriorated the performance of AA. Aside from the influence of wax crystals on hydrate agglomeration, it was found that wax deposition layer would alter the adhesion and bedding of hydrates, resulting in the variation of flow properties and wall deposition state.For low wax content systems(0.75 wt%) where rapid plugging occurred, the synergistic effect between wax and hydrates promoted the formation of wax-hydrate coupling aggregates, resulting in severe local deposition when the coupling aggregates attained critical deposition size and consequently decreasing flow rate, forming a vicious circle of decreasing transportability. Since bedding of coupling aggregates was hindered by the uniformly coated wax deposition layer on pipe wall, gradual plugging rather than rapid plugging occurred in medium wax content systems(1-1.25 wt%), predominately caused by the gradual increment in viscosity of waxy hydrate slurry. For relatively high wax content systems(2.89 wt%), hydrate formation and plugging did not occur, due to the insulation effect of wax deposition layer. A physical model for the synergistic deposition of wax and hydrates was also presented, which was meaningful to the development of a mathematical model for the prediction of blockage formation and risk analysis.

Flow property of AA2B06 sheet using overlapping elliptical bulge test

A novel experimental approach was presented, namely the overlapping elliptical bulge test, which can load and research thickness normal stress. Theoretical analysis model of the overlapping elliptical bulging was described, the equivalent stress?strain curves of target sheets with different ellipticity ratios were determined experimentally, and influences of the material performance and thickness of overlapping sheets on the flow property of the target sheet were also researched. The results show that, in the overlapping hydraulic bulge test, the equivalent stress?strain curve can be determined up to larger strains before necking than in the no overlapping hydraulic bulge test. And as the die ellipticity ratio decreases, the flow stress curves tend to move away from the curve obtained by circular (b/a=1) bulging test. Meanwhile, the flow property of the target sheet can be improved by choosing higher strength coefficient K, larger work hardening exponent n and proper thickness of the overlapping sheet.

Low-temperature Properties of Biodiesel:Rheological Behavior and Crystallization Morphology

A soybean oil derived biodiesel was prepared and blended with a conventional No. 0 petrodiesel. The pour points （PP） and the cold filter plugging points （CFPP） of biodiesel blends were evaluated on a low-temperature flow tester. Dynamic viscosities of the blends at different temperatures and different shear rates were measured on a rotary rheometer. The crystal morphologies of biodiesel blends at low temperatures were analyzed using a polarizing microscope. The results indicated that blended fuels demonstrated slight decrease in PPs and CFPPs as compared with those of neat soybean oil derived biodiesel and pure petrodiesel. Below the temperatures of PPs or CFPPs, the dynamic viscosity of biodiesel blends dramatically increased with a decreasing temperature, but decreased with an increasing shear rate, so that biodiesel blends exhibited non-Newtonian behavior. At temperatures higher than PPs or CFPPs, a linear relationship appeared between the dynamic viscosity and shear rate and biodiesel blends became Newtonian fluids. At low temperatures, wax crystals of biodiesel blends grew and agglomerated rapidly. Loss of fluidity for biodiesel blends at low temperatures could therefore be attributed on one hand to the sharp increase of viscosity and on the other hand to the rapid growth and agglomeration of wax crystals.

Fundamental kinematics laws of interstitial fluid flows on vascular walls

In the previous studies,the phenomenon that the interstitial fluid(ISF)can flow along tunica adventitia of the arteries and veins in both human and animal bodies was reported.On the basis of these studies,this paper aims to:(i)summarize the basic properties of the ISF flows in the walls of arteries and veins,(ii)combine the basic properties with axiomaticism and abstract the axiom for ISF flows,and(iii)propose three fundamental laws of the ISF flow,(i.e.,the existence law,the homotropic law and the reverse law).The three laws provide solid theoretical basement for exploring the kinematic patterns of interstitial fluid flow in the cardiovascular system.

Effect of Particle Phase Volume, Shape and Liquid Phase Concentrations on Rheological Properties of Large Particulate-Liquid Model Food Systems by Using Ball Measuring System

Rheological properties of large particulate-liquid model food systems were studied by using the BMS （ball measuring system）. The model food systems were composed of alginate gel particles （-10mm） and a gelatinised starch solution with 1% w/w sodium chloride as a liquid phase. The effects of particle phase volume （Ф, 0-0.60）, particle shapes （cube, sphere, rod and disc） and starch concentrations （3% and 5% w/w starch） were investigated. The power law model was successfully applied to characterize the flow properties of each system and the consistency K and power law index n were obtained. The K increased and n decreased with increasing # for samples at all particle shapes at 3% w/w starch in the liquid phase. The particle effect on the viscosity is further analysed by means of the Krieger-Dougherty model and the maximum packing fraction #,, and the intrinsic viscosity [η] were obtained in each system. The Фm, depended on the particle shape, as expected. The [7] value depended on particle shape and was largely in the order of 4.04 （cube）, 3.28 （disc）, 2.56 （sphere） and 2.32 （rod） at 3% w/w starch. The [η] also depended on starch concentration and was 1.1 at 5%,6 w/w starch in the liquid phase with spherical particles. The present results show successful application of BMS to study the rheological properties of large particulate liquid food systems at relatively small scale experiment （-0.5 L） and also that existing models for suspension rheology are applicable for such food systems to a great extend.

THE GENERAL PROPERTIES OF THE SPHERICAL VORTICES（SV）OF n－TH ORDER AND THE CHAOTIC PHENOMENA AND OF THE ORDERED STRUCTURES OF THE SV OF 3RD ORDER

The general properties of the spherical vortices(SV)of n-th order are discussedin this paper Numerical calculations are carried out in the case of n=3.We find outsome interesting phenomena concerning the chaotic regions and ordered islands on the Poincare sections. Interpretations of these phenomena are also given.

Finite Element Analysis and Experiment on Viscous Warm Pressure Bulging of AZ31B Magnesium Alloy

Aiming at overcoming the low plasticity of magnesium alloy at room temperature, we researched viscous warm pressure bulging（VWPB） of AZ31B magnesium alloy based on the excellent thermal stability of viscous medium under the warm forming condition. The potential improvements of plastic deformation ability and forming quality of AZ31B magnesium alloy are expected with the aid of thermal characteristics of viscous medium. During bulging process the velocity field variation and pressure stress field distribution of viscous medium are observed at different temperatures through which the effect of temperature on the mechanical property of viscous medium and AZ31B magnesium alloy are analyzed. The results show that the formability of AZ31B magnesium alloy increases first and then decreases as the temperature increases and it is the best at 200 ℃. On the other hand, the viscous medium which can build non-uniform pressure stress field also exhibits a good flow property at elevated temperature, and it is helpful to improving the formability of AZ31B magnesium alloy.

Fast determination of meso-level mechanical parameters of PFC models

To solve the problems of blindness and inefficiency existing in the determination of meso-level mechanical parameters of particle flow code (PFC) models, we firstly designed and numerically carried out orthogonal tests on rock samples to investigate the correlations between macro-and meso-level mechanical parameters of rock-like bonded granular materials. Then based on the artificial intelligent technology, the intelligent prediction systems for nine meso-level mechanical parameters of PFC models were obtained by creating, training and testing the prediction models with the set of data got from the orthogonal tests. Lastly the prediction systems were used to predict the meso-level mechanical parameters of one kind of sandy mudstone, and according to the predicted results the macroscopic properties of the rock were obtained by numerical tests. The maximum relative error between the numerical test results and real rock properties is 3.28% which satisfies the precision requirement in engineering. It shows that this paper provides a fast and accurate method for the determination of meso-level mechanical parameters of PFC models.

Preparation of Self-compacting Ultra-high Toughness Cementitious Composite

A self-compacting ultra-high toughness cementitious composite （UHTCC） reinforced by discontinuous short polyvinyl alcohol （PVA） fibers, which exhibits self-compacting performance in the fresh state and strain-hardening and multiple cracking behavior in the hardened state, was developed through controlling flow properties of fresh mortar matrix at constant ingredients concentrations determined by micromechanical design and ensuring uniform fibers dispersion. The superplasticizer was utilized to adjust its flow properties in the fresh state. A series of flow tests, including deformability test, flow rate test, and self-placing test, were conducted to characterize and quantify the fluidity performance of fresh mortar matrix and self-compactability of fresh UHTCC. It is revealed that the utilization of superplasticizer is efficient in producing the fresh mortar matrix with desirable fluidity and the resulting self-compacting UHTCC. In addition, results of four point bending tests on the developed self-compacting UHTCC confirm the insensitivity of mechanical performance of self-compacting UHTCC to the presence of external vibrations as well as the flexural characteristics of deformation hardening and multiple cracking.

NUMERICAL SIMULATION OF FREE MIXING LAYER WITH CROSS SHEAR

A spectrum method is used to simulate the time-developing free mixing layerwith cross shear which is introduced in different stages. The results show that the properties of flow are nearly the same for situations whether the cross shear is introduced in theinitial time or in early stage. If cross shear is introduced in the stage that the roll-up ofmixing layer occurs, the turbulent intensities of now will increase and mixture of now willbe enhanced.