Understanding the physical features of the flow noise for an axisymmetric body is important for improving the performance of a sonar mounted on an underwater platform. Analytical calculation and numerical analysis of ...Understanding the physical features of the flow noise for an axisymmetric body is important for improving the performance of a sonar mounted on an underwater platform. Analytical calculation and numerical analysis of the physical features of the flow noise for an axisymmetric body are presented and a simulation scheme for the noise correlation on the hydrophones is given. It is shown that the numerical values of the flow noise coincide well with the analytical values. The main physical features of flow noise are obtained. The flow noises of two different models are compared and a model with a rather optimal fore-body shape is given. The flow noise in horizontal symmetry profile of the axisymmetric body is non-uniform, but it is omni-directional and has little difference in the cross section of the body. The loss of noise diffraction has a great effect on the flow noise from boundary layer transition. Meanwhile, based on the simulation, the noise power level increases with velocity to approximately the fifth power at high frequencies, which is consistent with the experiment data reported in the literature. Furthermore, the flow noise received by the acoustic array has lower correlation at a designed central frequency, which is important for sonar system design.展开更多
Flow channels with a variable cross-section are important components of piping system and are widely used in variousfields of engineering.Using afinite element method and modal analysis theory,flow-induced noise,mode ...Flow channels with a variable cross-section are important components of piping system and are widely used in variousfields of engineering.Using afinite element method and modal analysis theory,flow-induced noise,mode shapes,and structure-borne noise in such systems are investigated in this study.The results demonstrate that the maximum displacement and equivalent stress are located in the part with variable cross-sectional area.The aver-age excitation force on theflow channel wall increases with theflow velocity.The maximum excitation force occurs in the range of 0–20 Hz,and then it decreases gradually in the range of 20–1000 Hz.Additionally,as theflow velocity rises from 1 to 3 m/s,the overall sound pressure level associated with theflow-induced noise grows from 49.37 to 66.37 dB.Similarly,the overall sound pressure level associated with the structure-borne noise rises from 40.27 to 72.20 dB.When theflow velocity is increased,the increment of the structure-borne noise is higher than that of theflow-induced noise.展开更多
In this article, a new acoustic test technique using towed model was introduced to study flow noise caused by a surface ship. The project of model test was be properly designed for acoustic signal collecting and with ...In this article, a new acoustic test technique using towed model was introduced to study flow noise caused by a surface ship. The project of model test was be properly designed for acoustic signal collecting and with the help of appropriate data processing method different kinds of acoustic sources could be successfully identified. A lot of work about fuid noise could be carried on with the towed model, and the noise corresponding to low frequency which is especially interested for its long distance radiating with small attenuation could also be studied in this way.展开更多
In this paper,a numerical simulation of flow-induced noise by the low Mach number turbulent flow with a sinusoidal wavy wall was presented based on the unsteady incompressible Navier-Stokes equations and Lighthill'...In this paper,a numerical simulation of flow-induced noise by the low Mach number turbulent flow with a sinusoidal wavy wall was presented based on the unsteady incompressible Navier-Stokes equations and Lighthill's acoustic analogy.Large eddy simulation (LES) was used to investigate the space-time flow field and the Smagorinsky sub-grid scale (SGS) model was introduced for turbulence model.Using Lighthill's acoustics analogy,the flow field simulated by LES was taken as near-field sound sources and radiated sound from turbulent flow was computed by the Curle's integral formulation under the low Mach number approximation.Both spanwise wavy wall and streamwise wavy wall with various wall wave amplitudes were discussed to investigate their effects on reducing the drag and flow noise.The relationship between flow noise and drag on the wavy wall is also studied.展开更多
The transition to turbulence in flows where the laminar profile is linearly stable requires perturbations of finite amplitude. "Optimal" perturbations are distinguished as extrema of certain functionals, and differe...The transition to turbulence in flows where the laminar profile is linearly stable requires perturbations of finite amplitude. "Optimal" perturbations are distinguished as extrema of certain functionals, and different functionals give different optima. We here discuss the phase space structure of a 2D simplified model of the transition to turbulence and discuss optimal perturbations with respect to three criteria: energy of the initial condition, energy dissipation of the initial condition, and amplitude of noise in a stochastic transition. We find that the states triggering the transition are different in the three cases, but show the same scaling with Reynolds number.展开更多
The natural flow cooling strategy is commonly employed in modern high-speed vessels and nuclear-powered submarines. These vessels rely on the energy generated by their own speed to drive the cooling system and supply ...The natural flow cooling strategy is commonly employed in modern high-speed vessels and nuclear-powered submarines. These vessels rely on the energy generated by their own speed to drive the cooling system and supply cooling water to the condenser. The circulating pump, which operates without a motor drive under natural flow conditions, is a large resistance component in the cooling system. However, it is also the primary noise source, significantly impacting the vessel’s safe operation and acoustic stealth performance. This study investigates the induced noise characteristics of a multi-stage pump under natural flow conditions by experiment, computational fluid dynamics (CFD), and acoustic finite element method. The analysis encompasses the distribution of the flow field, variations in acoustic power, spectral features of flow-induced noise, and directivity of external field radiation noise under different natural flow conditions. The results show that the acoustic power distribution is correlated with the flow field. When the impeller is stuck, the noise sources primarily concentrate in the flow separation area at the blade’s leading edge, the interface area between the impeller and the guide vane, and the flow shock area inside the guide vane. Conversely, when the impeller rotates passively, the blade wake area has a higher acoustic power. The flow noise spectrum under natural flow conditions mainly exhibits broadband and discrete characteristics. Additionally, the pump structure influences the external field radiation noise, and its directivity varies with different flow rates and characteristic frequencies. This study provides valuable insights into optimal design to reduce the noise of the circulating pump in the vessel’s natural flow cooling system. It is essential for ensuring the safe operation and acoustic stealth performance of high-speed vessels and nuclear-powered submarines.展开更多
The flow noise associated with sinusoidal vertical motion of a sonobuoy restrains its working performance.In practice,a suspension system consisting of elastic suspension cable and isolation mass is adopted to isolate...The flow noise associated with sinusoidal vertical motion of a sonobuoy restrains its working performance.In practice,a suspension system consisting of elastic suspension cable and isolation mass is adopted to isolate the hydrophone from large vertical motions of the buoy on the ocean surface.In the present study,a theoretical model of vertical motion based on the sonobuoy suspension system was proposed.The vertical motion velocity response of the hydrophone of a sonobuoy can be obtained by solving the theoretical model with Runge-Kutta algorithm.The flow noise of the hydrophone at this response motion velocity was predicted using a hybrid computational fluid dynamics(CFD)-Ffowcs Williams-Hawkings(FW-H)technique.The simulation results revealed that adding the elastic suspension cable with an appropriate elastic constant and counterweight with an appropriate mass have a good effect on reducing the flow noise caused by the sonobuoy vertical motion.The validation of this hybrid computational method used for reliable prediction of flow noise was also carried out on the basis of experimental data and empirical formula.The finds of this study can supply the deep understandings of the relationships between flow noise reduction and sonobuoy optimization.展开更多
Understanding the physical features of the diffracted sound field on the surface of an axisymmetric body is important for predicting the self-noise of a sonar mounted on an underwater platform. The diffracted sound fi...Understanding the physical features of the diffracted sound field on the surface of an axisymmetric body is important for predicting the self-noise of a sonar mounted on an underwater platform. The diffracted sound field from the transition region of an axisymmetric body was calculated by the geometrical theory of diffraction. The diffraction ray between the source point and the receiving point on the surface of an axisymmetric body was calculated by using the dynamic programming method. Based on the diffracted sound field, a simulation scheme for the noise correlation of the conformal array was presented. It was shown that the normalized pressure of the diffracted sound field from the transition region reduced with the increases of the frequency and the curvature of the ray. The flow noises of two models were compared and a rather optimum fore-body geometric shape was given. Furthermore, it was shown that the correlation of the flow noise in the low frequencies was stronger than that in the high frequencies. And the flow noise received by the acoustic array on the curved surface had a stronger correlation than that on the head plane at the designed center frequency, which is important for sonar system design.展开更多
Marine current turbine(MCT),which is designed for the power supply of underwater mooring platform(UMP),is investigated in this article.To reduce its flow noise,the microgrooved surface is applied at the suction surfac...Marine current turbine(MCT),which is designed for the power supply of underwater mooring platform(UMP),is investigated in this article.To reduce its flow noise,the microgrooved surface is applied at the suction surface of the turbine blades.Comprehensive analyses of the effects of the UMP on MCT with microgrooved surface in different working conditions are presented.The transient turbulent flow field is obtained by incompressible large eddy simulation(LES),and then the Ffowcs Williams and Hawkings(FW-H)acoustic analogy is adopted to forecast the flow noise generated from the pressure fluctuations and loadings of the UMP shell and MCT blade surfaces.The numerical methods are first validated with experimental data and good agreements are obtained.Then,the influence of several key parameters on the performance of the MCT is then systematically studied,including interval distance,angle of pitch and angle of sideslip.For each case,the hydrodynamic parameters(thrust coefficient,torque coefficient and power coefficient),the vortical structures behind the model and the overall sound pressure level(OASPL)directionality are analyzed.Additionally,the noise reduction effect of the microgrooved surface is also presented.The present investigation could provide an overall understanding for the performance of MCT combined with UMP.展开更多
The sound generated by a NACA0012 airfoil in the wake of a rod is numerically simulated by two approaches, one is the large eddy simulation (LES) with the FW-H acoustic analogy and the other is the LES with the Powe...The sound generated by a NACA0012 airfoil in the wake of a rod is numerically simulated by two approaches, one is the large eddy simulation (LES) with the FW-H acoustic analogy and the other is the LES with the Powell vortex sound theory, in order to compare the accuracies of their predictions. The vortical structures around the rod-airfoil are computed by the LES and captured by the vortex identification (Q). The acoustic predictions are verified by the measurements. It is shown that the computed results by the two hybrid approa- ches (LES and FW-H, LES and Powell) are very similar. Both are shown to be satisfactory in the prediction of the noise generated by an unsteady flow. Subsequently, the numerical simulations of the wall pressure fluctuations and the flow-induced noise of a NACA0015 airfoil are made by the two hybrid approaches. At two angles of attack ( 0~ and 8~ ), the wall pressure fluctuations of the NACA0015 airfoil are computed. The obtained power spectra of the wall pressure fluctuations are analyzed and compared with the measured data. And the vortical structures around the airfoil at two angles of attack are simulated and analyzed. After that, the flow induced noises of the NACA0015 airfoil at two angles of attack are predicted by the two hybrid approaches (LES and FW-H, LES and Powell). The radiated sound spectra are analyzed and compared with the experimental data. Comparisons show that both are robust, credible and satisfactory in the numerical prediction of the flow induced noise. All numerical simulations are carried out by parallel processing in the Wuxi supercomputing center.展开更多
The structural vibration and the sound radiation induced by the flow over a cavity on a hydrofoil are investigated experimentally and numerically. The large eddy simulation(LES) is adopted to calculate the flow field ...The structural vibration and the sound radiation induced by the flow over a cavity on a hydrofoil are investigated experimentally and numerically. The large eddy simulation(LES) is adopted to calculate the flow field and the pressure fluctuation characteristics. A coupled finite element method/boundary element method approach is used to analyze the hydrofoil vibration and the structure-borne noise. The flow noise is calculated using an acoustic analogy by considering the surface pressure fluctuations as the dipole sources. A hollow hydrofoil with an orifice supported by four cylinder rods is constructed for the experiments. Modal tests are performed to obtain the natural frequencies of the hydrofoil in air and water. The vibro-acoustic experiments are carried out in the water tunnel at various free stream velocities with the orifice open and closed. A pressure transducer is used to measure the pressure fluctuations behind the downstream edge of the orifice. The triaxial accelerometers mounted on the side walls are used to measure the vibrational response of the hydrofoil. Furthermore, a hydrophone located in a box, filled with water is used to measure the sound radiation. The structure-borne noise and the flow noise are identified by their frequency properties. Reasonable agreements are observed between the numerical predictions and the experimental measurements.展开更多
基金Project supported by the National Natural Science Foundational of China (Grant No. 10774119)the Program for New Century Excellent Talents in University, China (Grant No. NCET-08-0455)+1 种基金the Natural Science Foundation of Shaanxi Province of China (Grant No. SJ08F07)the Foundation of National Laboratory of Acoustic and the Foundation for Fundamental Research of Northwestern Polytechnic University, China (Grant No. 2007004)
文摘Understanding the physical features of the flow noise for an axisymmetric body is important for improving the performance of a sonar mounted on an underwater platform. Analytical calculation and numerical analysis of the physical features of the flow noise for an axisymmetric body are presented and a simulation scheme for the noise correlation on the hydrophones is given. It is shown that the numerical values of the flow noise coincide well with the analytical values. The main physical features of flow noise are obtained. The flow noises of two different models are compared and a model with a rather optimal fore-body shape is given. The flow noise in horizontal symmetry profile of the axisymmetric body is non-uniform, but it is omni-directional and has little difference in the cross section of the body. The loss of noise diffraction has a great effect on the flow noise from boundary layer transition. Meanwhile, based on the simulation, the noise power level increases with velocity to approximately the fifth power at high frequencies, which is consistent with the experiment data reported in the literature. Furthermore, the flow noise received by the acoustic array has lower correlation at a designed central frequency, which is important for sonar system design.
基金supported by the Key Research and Development Project of Shandong Province[2019GSF109084]the National Natural Science Foundation of China[51776111]Young Scholars Program of Shandong University[2018WLJH73].
文摘Flow channels with a variable cross-section are important components of piping system and are widely used in variousfields of engineering.Using afinite element method and modal analysis theory,flow-induced noise,mode shapes,and structure-borne noise in such systems are investigated in this study.The results demonstrate that the maximum displacement and equivalent stress are located in the part with variable cross-sectional area.The aver-age excitation force on theflow channel wall increases with theflow velocity.The maximum excitation force occurs in the range of 0–20 Hz,and then it decreases gradually in the range of 20–1000 Hz.Additionally,as theflow velocity rises from 1 to 3 m/s,the overall sound pressure level associated with theflow-induced noise grows from 49.37 to 66.37 dB.Similarly,the overall sound pressure level associated with the structure-borne noise rises from 40.27 to 72.20 dB.When theflow velocity is increased,the increment of the structure-borne noise is higher than that of theflow-induced noise.
基金Project supported by the Hydrodynamic Research Foundation (Grant No. 40104050202).
文摘In this article, a new acoustic test technique using towed model was introduced to study flow noise caused by a surface ship. The project of model test was be properly designed for acoustic signal collecting and with the help of appropriate data processing method different kinds of acoustic sources could be successfully identified. A lot of work about fuid noise could be carried on with the towed model, and the noise corresponding to low frequency which is especially interested for its long distance radiating with small attenuation could also be studied in this way.
基金the National Natural Science Foundation of China(No. 10772119)
文摘In this paper,a numerical simulation of flow-induced noise by the low Mach number turbulent flow with a sinusoidal wavy wall was presented based on the unsteady incompressible Navier-Stokes equations and Lighthill's acoustic analogy.Large eddy simulation (LES) was used to investigate the space-time flow field and the Smagorinsky sub-grid scale (SGS) model was introduced for turbulence model.Using Lighthill's acoustics analogy,the flow field simulated by LES was taken as near-field sound sources and radiated sound from turbulent flow was computed by the Curle's integral formulation under the low Mach number approximation.Both spanwise wavy wall and streamwise wavy wall with various wall wave amplitudes were discussed to investigate their effects on reducing the drag and flow noise.The relationship between flow noise and drag on the wavy wall is also studied.
基金supported in part by the German Research Foundation within FOR 1182
文摘The transition to turbulence in flows where the laminar profile is linearly stable requires perturbations of finite amplitude. "Optimal" perturbations are distinguished as extrema of certain functionals, and different functionals give different optima. We here discuss the phase space structure of a 2D simplified model of the transition to turbulence and discuss optimal perturbations with respect to three criteria: energy of the initial condition, energy dissipation of the initial condition, and amplitude of noise in a stochastic transition. We find that the states triggering the transition are different in the three cases, but show the same scaling with Reynolds number.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.52279087,51879122).
文摘The natural flow cooling strategy is commonly employed in modern high-speed vessels and nuclear-powered submarines. These vessels rely on the energy generated by their own speed to drive the cooling system and supply cooling water to the condenser. The circulating pump, which operates without a motor drive under natural flow conditions, is a large resistance component in the cooling system. However, it is also the primary noise source, significantly impacting the vessel’s safe operation and acoustic stealth performance. This study investigates the induced noise characteristics of a multi-stage pump under natural flow conditions by experiment, computational fluid dynamics (CFD), and acoustic finite element method. The analysis encompasses the distribution of the flow field, variations in acoustic power, spectral features of flow-induced noise, and directivity of external field radiation noise under different natural flow conditions. The results show that the acoustic power distribution is correlated with the flow field. When the impeller is stuck, the noise sources primarily concentrate in the flow separation area at the blade’s leading edge, the interface area between the impeller and the guide vane, and the flow shock area inside the guide vane. Conversely, when the impeller rotates passively, the blade wake area has a higher acoustic power. The flow noise spectrum under natural flow conditions mainly exhibits broadband and discrete characteristics. Additionally, the pump structure influences the external field radiation noise, and its directivity varies with different flow rates and characteristic frequencies. This study provides valuable insights into optimal design to reduce the noise of the circulating pump in the vessel’s natural flow cooling system. It is essential for ensuring the safe operation and acoustic stealth performance of high-speed vessels and nuclear-powered submarines.
基金This work was supported by the National Natural Science Foundation of China(Grant No.61901383)the Natural Science Basic Research Plan in Shaanxi Province of China(Program No.2019JQ633)+2 种基金the Fundamental Research Funds for the Central University(Grant No.3102019HHZY030011)China Postdoctoral Science Foundation(2019M663822)the Open Fund Project of Key Laboratory of Marine Environmental Information Technology,Ministry of Natural Resources of the People’s Republic of China.
文摘The flow noise associated with sinusoidal vertical motion of a sonobuoy restrains its working performance.In practice,a suspension system consisting of elastic suspension cable and isolation mass is adopted to isolate the hydrophone from large vertical motions of the buoy on the ocean surface.In the present study,a theoretical model of vertical motion based on the sonobuoy suspension system was proposed.The vertical motion velocity response of the hydrophone of a sonobuoy can be obtained by solving the theoretical model with Runge-Kutta algorithm.The flow noise of the hydrophone at this response motion velocity was predicted using a hybrid computational fluid dynamics(CFD)-Ffowcs Williams-Hawkings(FW-H)technique.The simulation results revealed that adding the elastic suspension cable with an appropriate elastic constant and counterweight with an appropriate mass have a good effect on reducing the flow noise caused by the sonobuoy vertical motion.The validation of this hybrid computational method used for reliable prediction of flow noise was also carried out on the basis of experimental data and empirical formula.The finds of this study can supply the deep understandings of the relationships between flow noise reduction and sonobuoy optimization.
基金Project supported by the National Natural Science Foundational of China (Grant No.10774119)the Program for New Century Excellent Talents in University of Ministry of Education of China (Grant No.NCET-08-0455)+2 种基金the Natural Science Foundation of Shaanxi Province of China (Grant No.SJ08F07)the Foundation of National Laboratory of Acoustics of Chinathe Foundation for Fundamental Research of Northwestern Polytechnical University of China (Grant No.2007004)
文摘Understanding the physical features of the diffracted sound field on the surface of an axisymmetric body is important for predicting the self-noise of a sonar mounted on an underwater platform. The diffracted sound field from the transition region of an axisymmetric body was calculated by the geometrical theory of diffraction. The diffraction ray between the source point and the receiving point on the surface of an axisymmetric body was calculated by using the dynamic programming method. Based on the diffracted sound field, a simulation scheme for the noise correlation of the conformal array was presented. It was shown that the normalized pressure of the diffracted sound field from the transition region reduced with the increases of the frequency and the curvature of the ray. The flow noises of two models were compared and a rather optimum fore-body geometric shape was given. Furthermore, it was shown that the correlation of the flow noise in the low frequencies was stronger than that in the high frequencies. And the flow noise received by the acoustic array on the curved surface had a stronger correlation than that on the head plane at the designed center frequency, which is important for sonar system design.
基金supported by the Scientific Research Start-up Fund of Nanjing University of Science and Technology(Grant No.AE89991/383)the National Natural Science Foundation of China(Grant Nos.51809214,10672136 and 61572404).
文摘Marine current turbine(MCT),which is designed for the power supply of underwater mooring platform(UMP),is investigated in this article.To reduce its flow noise,the microgrooved surface is applied at the suction surface of the turbine blades.Comprehensive analyses of the effects of the UMP on MCT with microgrooved surface in different working conditions are presented.The transient turbulent flow field is obtained by incompressible large eddy simulation(LES),and then the Ffowcs Williams and Hawkings(FW-H)acoustic analogy is adopted to forecast the flow noise generated from the pressure fluctuations and loadings of the UMP shell and MCT blade surfaces.The numerical methods are first validated with experimental data and good agreements are obtained.Then,the influence of several key parameters on the performance of the MCT is then systematically studied,including interval distance,angle of pitch and angle of sideslip.For each case,the hydrodynamic parameters(thrust coefficient,torque coefficient and power coefficient),the vortical structures behind the model and the overall sound pressure level(OASPL)directionality are analyzed.Additionally,the noise reduction effect of the microgrooved surface is also presented.The present investigation could provide an overall understanding for the performance of MCT combined with UMP.
文摘The sound generated by a NACA0012 airfoil in the wake of a rod is numerically simulated by two approaches, one is the large eddy simulation (LES) with the FW-H acoustic analogy and the other is the LES with the Powell vortex sound theory, in order to compare the accuracies of their predictions. The vortical structures around the rod-airfoil are computed by the LES and captured by the vortex identification (Q). The acoustic predictions are verified by the measurements. It is shown that the computed results by the two hybrid approa- ches (LES and FW-H, LES and Powell) are very similar. Both are shown to be satisfactory in the prediction of the noise generated by an unsteady flow. Subsequently, the numerical simulations of the wall pressure fluctuations and the flow-induced noise of a NACA0015 airfoil are made by the two hybrid approaches. At two angles of attack ( 0~ and 8~ ), the wall pressure fluctuations of the NACA0015 airfoil are computed. The obtained power spectra of the wall pressure fluctuations are analyzed and compared with the measured data. And the vortical structures around the airfoil at two angles of attack are simulated and analyzed. After that, the flow induced noises of the NACA0015 airfoil at two angles of attack are predicted by the two hybrid approaches (LES and FW-H, LES and Powell). The radiated sound spectra are analyzed and compared with the experimental data. Comparisons show that both are robust, credible and satisfactory in the numerical prediction of the flow induced noise. All numerical simulations are carried out by parallel processing in the Wuxi supercomputing center.
文摘The structural vibration and the sound radiation induced by the flow over a cavity on a hydrofoil are investigated experimentally and numerically. The large eddy simulation(LES) is adopted to calculate the flow field and the pressure fluctuation characteristics. A coupled finite element method/boundary element method approach is used to analyze the hydrofoil vibration and the structure-borne noise. The flow noise is calculated using an acoustic analogy by considering the surface pressure fluctuations as the dipole sources. A hollow hydrofoil with an orifice supported by four cylinder rods is constructed for the experiments. Modal tests are performed to obtain the natural frequencies of the hydrofoil in air and water. The vibro-acoustic experiments are carried out in the water tunnel at various free stream velocities with the orifice open and closed. A pressure transducer is used to measure the pressure fluctuations behind the downstream edge of the orifice. The triaxial accelerometers mounted on the side walls are used to measure the vibrational response of the hydrofoil. Furthermore, a hydrophone located in a box, filled with water is used to measure the sound radiation. The structure-borne noise and the flow noise are identified by their frequency properties. Reasonable agreements are observed between the numerical predictions and the experimental measurements.