Changes of Granule Structure and Enzyme Hydrolysability of Starch in Upper Flue-cured Tobacco Leaves During Bulk Flue-curing

[Objective] This study aimed to investigate the changes of granule struc- ture, characteristic and related enzymatic activity of starch in upper flue-cured tobac- co leaves during bulk flue-curing process, to provide theoretical basis for reasonably regulating the starch content in upper flue-cured tobacco leaves and improving the quality of upper flue-cured tobacco leaves. [Method] Changes of amylase activity, enzyme hydrolysability and granule structure of starch in upper flue-cured tobacco leaves were studied during flue-curing process using conventional physical and chemical analysis and SEM. [Result] During the flue-curing process, the starch con- tent of tobacco leaves changed greatly at yellowing stage, and the activity of amy- lase presented the double-peak curve. The SEM observation results showed that most of the starch granules in fresh tobacco leaves were spheroidal and long cylin- drical, while some individuals were in irregular shape, with obvious groove-like in- vagination and layered structure on granule surface; during the flue-curing process, a large amount of starch granules showed layered structure on the surface at yellow- ing stage, and the long cylindrical starch granules were reduced greatly; at the end of flue-curing, there were barely any long cylindrical starch granule in flue-cured to- bacco leaves. Average long-axis-diameter of starch granules in fresh tobacco leaves was 3.21 μm, showing an overall gradually increasing trend during the flue-curing process, which was significantly enhanced at 38 and 42 ℃. The diameter of starch granules increased by more than 60% at the end of 42 ℃ and there was no re- markable difference after 47 ℃. During the flue-curing process, enzyme hydrolysabil- ity of starch in flue-cured tobacco leaves first increased, reached a peak at 38 ~C, and then decreased. [Conclusion] During the bulk flue-curing, the yellowing stage is the critical period for starch content, granule structure and characteristic changes of flue-cured tobacco leaves, it is of positive effects to improve the quality of upper flue-cured tobacco leaves by regulating the flue-curing conditions at yellowing stage.

Effect of Different Flue-curing Techniques on the Taste and Aroma Substances of Tobacco Leaves

[Objective]This study aimed to optimize the conditions for curing tobacco leaf, so as to improve its flavor and quality. [Method] Leaves of Yuanyan 87 were col ected and cured by three different techniques （moderate-intensity conditions throughout the curing course; high-intensity conditions at leaf yel owing and wilting stages, moderate-intensity conditions at leaf drying and vein drying stages; high-in-tensity conditions throughout the curing course）, and then the contents of 48 aroma substances and taste indices of the finished tobacco leaves were measured. [Result] The contents of 28 aroma substances in the tobacco leaves cured under high-inten-sity conditions throughout the course were higher and the taste indices of these to-bacco leaves were better, compared with those flue-cured by the other two tech-niques. The contents of the other 20 aroma substances were not significantly af-fected by the curing techniques. The second best technique was high-intensity con-ditions at leaf yel owing and wilting stages and moderate-intensity conditions at leaf drying and vein drying stages. Curing tobacco leaves at moderate-intensity condi-tions throughout the course was the worst one. [Conclusion] Compared with the oth-er two methods, the contents of aroma substances and taste indices of the tobacco leaves cured under high-intensive conditions throughout the course were the best.

Effects of Exogenous Amylases and Metal Ions on the Amylase Specific Activities and Starch Degradation of the Upper Leaves of ‘KRK_(26)' during Flue-curing

Objective] The aim of this study was to investigate the effects of exoge-nous amylases and Ca2＋, Mn2＋ and K＋ on the amylase specific activities and starch degradation of the upper leaves of ＇KRK26＇ planted in Yunnan Province during flue-curing. [Method] The amylase specific activities and starch degradation of the leaves were determined by using spectrophotometry. [Result] The 8 U/g exogenous α-amy-lase could improve the specific activity of the leaf α-amylase at yel owing and color-fixing stages, but could not at stem-drying stage, and similarly, the 80 U/g exoge-nous β-amylase could improved the specific activity of the leaf β-amylase at the yel owing stage and the early period of color-fixing stage. The leaf starch could be enhanced to degrade by the exogenous α- or β-amylases and the enhancing effect of the former was stronger than that of the later. 1.50 mg/ml Ca2＋ improved the specific activity of the leaf （α＋β）-amylase mainly due to its enhancing effect on the leaf α-amylase, and increased the starch degradation. 4 mmol/L Mn2＋ inhibited the leaf α-amylase from yel owing to the early period of color-fixing and the β- and （α＋β）-amylases from the yel owing to the later period of color-fixing, but enhanced the leafα-amylase from the later period of color-fixing to the later period of stem-drying and the β- and （α＋β）-amylases at the later period of stem-drying. Meanwhile, Mn2＋ ham-pered the starch degradation during yel owing, but promoted it from the early period of color-fixing to stem-drying. 1 mg/ml K＋ enhanced the leaf α-, β- and （α＋β）-amy-lases during the yel owing stage, but lowered them from the early period of color-fix-ing to the later period of stem-drying, and always inhibited the leaf starch degrada-tion. [Conclusion] The exogenous α-, β- amylases and Ca2＋ of suitable concentra-tions could be used to treat the tobacco leaves before flue-curing to improve the leaf starch degradation during the curing.

Effects of Different Flue-curing Barns on Aroma Quality of Upper Flue-cured Tobacco Leaves of K326

[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and the supporting tech-niques. [Method] The upper leaves of K326 were flue-cured in a commonness barn, a four-shelf bulk curing barn and a three-shelf bulk curing barn separately, and then the contents of aroma components and taste quality indices of the finished leaves were measured and compared. [Result] The contents of total aroma components, chromoplast pigment degradation products, phenylalanine aroma components and neophytadiene showed no significant differences in the leaves flue-cured in four-shelf bulk curing barn and commonness barn, but were significantly or very significantly higher than those in the leaves flue-cured in three-shelf bulk curing barn. The con-tents of carotenoid degradation products, Mail ard reaction products, cembranes aro-ma components and total aroma components （except neophytadiene） showed no significant difference among the three treatments. The results of sensory evaluation revealed that the sensory taste of the leaves flue-cured in four-shelf bulk curing barn was the best, as the finished leaves had rich, delicate aroma, comfortable and clean aftertaste. The leaves flue-cured in commonness barn was better than those flue-cured in three-shelf bulk curing barn in aroma quality, amount and aftertaste. [Conclusion] The four-shelf bulk curing barn had a large volume for tobacco leaf processing, but a similar baking environment to the commonness barn, which is conducive to the formation and accumulation of aroma components, so the finished leaves had similar appearance and quality with those flue-cured in commonness barn. The upper flue-cured leaves in three-shelf bulk curing bran had poorer quality than those flue-cured in the other two barns.

Studies on Amylase and Degradation of Starch and Pigment of Tobacco Leaf During Process of Flue-Curing

The changes in the activity of amylase and amylase-isoenzyme and the degradation of starch and pigment of tobacco leaf during flue-curing were studied by using the electric- heated flue-curing barn designed and made by the Henan Agricultural University. The temperature and humidity of the barn were controlled automatically. The results indicated that starch in tobacco leaf decreased rapidly and leveled off after 48 h of curring, in the meantime, the content of soluble sugar increased accordingly and reached a peak at the stage of color-fixing. Both of them had a rapid-changing stage in the first 36 hours of yellowing. The changes of starch and soluble sugar contents had highly significant negative-correlation at 1 % level (rNC89 = -0.8962**, rYY85 = -0.9704**). The activity of amylase increased with the proceeding of curing and reached a peak after 36 hours of curing, then decreased. But the activity of amylase kept at a high level when the humidity of curing-environment was very low, even if the tobacco leaf had been dried. The rapid degradation of starch showed a significantly negative correlation with the increase of activity of amylase at 5 % level (rNC89 = -0.8495*, rYY85 = -0.7839*). The degradation of starch and pigment had the same regulation and had highly significant correlation at 1 % level (rNC89= 0.9649**, rYY85= 0.9428**). There were mainly three amylase-isoenzyme bands -A, B, C respectively, in tobacco leaf during flue curing. They were identified as α-AMY, β-AMY, R-AMY, and the activity of β-AMY was the highest. The changes in amylase activity and contents of starch and pigment were affected by the tobacco leaf moisture and environmental humidity during curing.

Extreme Pressure Equipments

Pressure equipments in the process industries and the newly developing industries usually have extreme sizes and/or are subjected to extreme operating conditions such as high pressure,blast loading,cryogenic temperature,elevated temperature,complex corrosion,and so on.In order to understand,research and develop these equipments systematically,a concept of extreme pressure equipments（EPEs） is proposed.The applications and demands of EPEs in petrochemical industry,coal chemical industry,advanced energy,military,space technology,and environment protection are introduced.Basic scientific problems in material,design,inspection, and safety related to EPEs are discussed.Then,take chemical composition,manufacturing process,service duration,and operating conditions for example,main factors which affect material properties of EPEs are analyzed.New design concepts including design based on life cycle,dynamic design and light-weight design are introduced.EPEs with higher efficiency,lower cost and safer performance are in urgent demand in national major projects including ten million ton oil refinery,one million ton ethylene,liquefied natural gas transportation,and nuclear power plant.Thus,further research should be conducted on information acquisition, multi-mechanism damage coupling model,damage inspection,life prediction,online safety monitoring,maintenance strategy,safety pre-warning system,and emergency system.

Trend Prediction Method Based on the Largest Lyapunov Exponent for Large Rotating Machine Equipments

In order to predict electromechanical equipments＇ nonlinear and non-stationary condition effectively, max Lyapunov exponent is introduced to the fault trend prediction of large rotating mechanical equipments based on chaos theory. The predict method of chaos time series and two methods of proposing f and F are dis- cussed. The arithmetic of max prediction time of chaos time series is provided. Aiming at the key part of large rotating mechanical equipments-bearing, used this prediction method the simulation experiment is carried out. The result shows that this method has excellent performance for condition trend prediction.

INTRODUCTION TO NEW TECHNOLOGY AND EQUIPMENTS IN PINGGUO ALUMINA REFINERY

The new technology and equipments used in alumina refinery in PINGGUO ALUMINUM COMPANY were introduced. Problems encountered during early period of its operation and improvements to the process and equipments were discussed. Current opemtion situation and pedect technical and economical figures were also introduced.

Changes of Polyphenols in Tobacco Leaves During the Flue-Curing Process and Correlation Analysis on Some Chemical Components

The changes of polyphenols in tobacco leaves during the flue-curing process and correlation analysis on some chemical components were studied. Leaf samples were taken from different tobacco-producing regions in Henan Province, China. The results indicated that the content of total phenols increased during the first 24 h of curing, and then decreased. It reached the lowest value at 72 h of curing and increased rapidly after that. The content of chlorogenic acid also increased during 0-24 h of curing. But the lowest point occurred at 60 or 72 h of curing and then it increased till the end of the curing process. The content of mtin generally increased with curing, and showed little fluctuations. The changes of PPO and POD activity were the opposite. Rutin was found to have a highly significant positive correlation with total sugar （r=0.822^＊＊）, but a highly significant negative correlation with starch, nicotine, and protein.

Effects of Different Flue-curing Technologies on Microscopic Structure of Flue-cured Tobacco Leaves

[Objective] This study aimed to compare the effects of Chinese quality-improving fragrunce-increasing tobacco flue-curing technology, Chinese three- stage tobaeeo flue-curing technology and Zimbabwean tobaceo flue-euring technology on microscopie structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method ] Middle leaves of tobacco cultivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the microscopic structure of flue-cured tobaceo leaves. [ Result] During three flue-curing processes, leaves, palisade tissues and sponge tissues shrank gradually. Three flue-euring processes exhibited significant differ- ences in the peak of tissue shrinkage ： microscopic structure of flue-cured tobacco leaves in Chinese three-stage tobacco flue-curing process shrank earliest, follower by Chinese quality-improving fragrance-increasing tobacco flue-curing process; flue-eured tobacco leaves in Zimbabwean tobacco flue-curing process presented the latest shrinkage. At 84 h post-curing, leaf thickness in three flue-curing processes showed a descend order of Chinese three-stage tobacco flue-curing process 〉 Chinese quality-improving fragrance-increasing tobacco flue-curing process 〉 Zimbabwean tobacco flue-curing process. Upper and lower epidermal cells in Zimb- abwean tobacco flue-curing process ruptured earlier than other two flue-curing processes; eventually, the majority of cells ruptured and mixed with palisade tissues and sponge tissues. In Chinese quality-improving fragranee-increasing tobacco flue-curing process, only a small number of epidermal cells in dried leaves ruptured. Among three flue-curing technologies, Zimbabwean tobacco flue-curing technology exhibited the greatest damage to epidermal cells, followed by Chinese three-stage tobaceo flue-curing technology; Chinese quality-improving fragrance-increasing tobacco flue-curing technology had the minimum damage to epidermal cells. Mese- phyll cross-section exhibited significant morphological changes in stomata. To be specific, at 0 - 12 h post-curing, stomata of tobacco leaves closed with slightly prominent stamatal apparatuses on upper and lower epidermis; at 24 -72 h post-curing, stomata of tobaceo leaves changed gradually from opening to closure with significantly prominent stomatal apparatuses on upper and lower epidermis; at 84 h post-curing, stomata of tobacco leaves closed, and the majority of stomatal appa- ratuses were significantly prominent. In Chinese quality-improving fragrance-increasing tobacco flue-curing process, only a small number of epidermal ceils ruptured at 84 h pest-flue-curing; palisade tissues and sponge tissues shrank almost simultaneously. Significant gaps were observed between palisade tissues and between pal- isade tissues and sponge tissues. Chinese quality-improving fragrance-increasing tobacco flue-curing technology exhibited lower disorder level compared with other two flue-curing technologies. [ Conclusion] Chinese quality-improving fragrance-increasing tobacco flue-curlng technology was conducive to maintaining the micro- scopic structure integrity of flue-cured tobacco leaves and obtaining high-quality flue-cured tobacco leaves.

The Quality Difference of Tobacco Leaves Between Different Flue-curing Processes in Honghe Tobacco-growing Area

[Objectives] This study was conducted to compare the effects of different curing processes,in order to optimize the local supporting intensive fluecuring process.[Methods] A comparative experiment was carried out in Mile,Luxi and Jianshui on the four-layer tobacco-packed intensive curing process(K1)and the eight-point precise and intensive curing process(K2).[Results]The results showed that according to the appearance evaluation of the tobacco leaves,K1 was higher than K2 in respective scores of color,maturity,leaf structure and defects and the total score,while K1 equaled K2 in the scores of identity,oil content,chroma and length.The differences in respective scores of the two processes were not significant.According to the results of sensory evaluation,the two tobacco enterprises got different evaluation results of unblended cigarettes made of the middle leaves due to different raw material requirements of the enterprises by different processes.K1 was higher than K2 in the sensory evaluation of China Tobacco Yunnan Industrial Co.,Ltd.,while it was lower than K2 in that of China Tobacco Zhejiang Industrial Co.,Ltd.,and the difference in the total score between the two processes was significant.From the content of chemical components,in the conventional chemical component contents including total sugar,reducing sugar,chlorine and starch,K1 was higher than K2,while in the contents of potassium,total phytonine,total nitrogen and petroleum ether extract,K1 was lower than K2,but the differences were not significant.K1 was lower than K2 in the contents of neutral aroma components including ketones,alcohols,aldehydes,heterocyclics,neophytadiene and total content,while K1 was higher than K2 in the contents of esters,phenols,but the respective differences were not significant.Except the significant difference in the total score in the sensory evaluation of China Tobacco Zhejiang Industrial Co.,Ltd.,there were no significant differences in other items in the appearance evaluation,sensory evaluation and chemical composition of tobacco leaves between K1 and K2.[Conclusions] The supporting intensive curing process can be further optimized on the basis of this study.

Effects of Different Flue-curing Technologies on Submicroscopic Structure of Flue-cured Tobacco Leaves

[ Objective] This study aimed to compare the effects of low-temperature low-humidity tobacco flue-curing technology, moderate-temperature moderate- humidity tobacco flue-curing technology and moderate-temperature high-humidity tobacco flue-curing technology on submicroscopic structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method] Middle leaves of tobacco cuhivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the submicroscopic structure of flue-cured tobacco leaves. [ Result] Morphology changes and structural rupture of chloroplasts occurred at different time during three flue-curing proces- ses. In low-temperature low-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred late but rapidly; in moderate-tempera- ture moderate-humidity flue-curing process and moderate-temperature high-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred early but slowly. Among these three flue-curing processes, the speed of changes in mitochondria morphology, cristae number and membrane rupture pres- ented an upward order of low-temperature low-humidity flue-curing process 〈 moderate-temperature high-humidity flue-curlng process 〈 moderate-temperature moderate-humidity flue-curing process. In low-temperature low-humldity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 36 -48 h ; in moderate-temperature moderate-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 24 - 36 h; in moderate-temperature high-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 12 - 24 h. [ Conclusion ] Using low-temperature low-humidity flue- curing technology could prolong the maintenance duration of the submicroscopic structure integrity of flue-cured tobacco leaves, which was conducive to fully decom- posing and transforming substances in tobacco leaves and obtaining high-quality flue-cured tobacco leaves.

Key Technologies and Development Trends in Advanced Intelligent Sawing Equipments

As a starting point in equipment manufacturing,sawing plays an important role in industrial production.Intelligent manufacturing equipment is an important carrier of intelligent manufacturing technologies.Due to the backwardness of intelligent technology,the comprehensive performance of sawing equipments in China is obviously different from that in foreign countries.State of the art of advanced sawing equipments is investigated along with the technical bottleneck of sawing machine tool manufacturing,and a new industrial scheme of replacing turning-milling by sawing is described.The key technologies of processing-measuring integrated control,multi-body dynamic optimization,the collaborative sawing network framework,the distributed cloud sawing platform,and the self-adapting service method are analyzed;with consideration of the problems of poor processing control stableness,low single machine intelligence level,no on-line processing data service and active flutter suppression of sawing with wide-width and heavy-load working conditions.Suggested directions for further research,industry implementation,and industry-research collaboration are provided.

Three-Stage Six-Step Flue-Curing Technology for Viginia Tobacco Leaves and Its Application in China

In order to overcome the problem that the leaf yellowing stage in tobacco curing reduces the fragrance of the product, this study introduced the principle and key parameters of a three-stage six-step curing technology. The field trail was conducted in Wulong county of Chongqing city in 2010, and Virginia K326 was the tested cultivar. The middle leaves were harvested and plaited after maturity, and then cured with the three-stage six-step curing technology and traditional three-stage curing technology, respectively. Three replicates were established for each of the two curing technologies. Then, chemical constituents, aromatic substances and smoking quality were analyzed. The results show that compared with the traditional three-stage curing technology, the three-stage six-step curing technology produces more suitable ratios of chemical constituents, higher aromatic component content and higher smoking quality grade of tobacco leaves. Therefore, the continuous improvement of corollary equipment and matching technologies is expected to widen the applications of the three-stage six-step curing technology in tobacco and provide a strong technical support for the development of the tobacco industry.

Research and design of the main equipments and structure of Xiangjiaba shiplift

The type of pinion and rack vertical shiplifts has been developed in recent a couple of years in the construction of dams.But the design methods and methodologies have rarely been discussed in literature.The Xiangjiaba shiplift is the second shiplift of this type following the Three Gorges shiplift.Being aimed at the technological rationality of the design in synthetically considering security,economy and applicability,this paper presents the research results of some vital issues relating the design of the Xiangjiaba shiplift,including the determination of design water depth of ship chamber based on fluid numeral computation and physical model test,the optimum design of general layout of main equipments and the civil structure of the Xiangjiaba shiplift,the finite element method(FEM) analysis of stress,vibration modes and the buckling of ship chamber,antiseismic research and the design of structures and mechanisms of the shiplift and the optimum design of driving mechanisms.This research provides the theoretical basis for the design of the Xiangjiaba shiplift.The design principles and research methods are valuable for the design of the same type of shiplifts.

Numerical research on dynamic response of naval equipments subjected to impact loads

When subjected to underwater explosion,the anti-shock performance of naval equipment is a key factor affecting the fighting capacity and safety of a war ship. For large-scale naval equipment,it is costly to do the shock test for its huge mass and large size. Consequently,the numerical research was carried our to study the shock resistance of the equipment. Taking turbo-charger set for example,its anti-shock performance was studied using software ABAQUS based on the time-domain shock analysis method presented in BV043 /85. According to the analysis results,shock response of typical regions is obtained,some regularity curves are concluded by analyzing the Mises stress of the typical regions,and the weak regions are found out. The study can provide some references on design of turbo-charger set.

Entanglement distribution using three-mode separable state with imperfect equipments

We show a scheme to distribute the entanglement by using three-mode separable Gaussian state prepared with imperfect equipments. The scheme achieves the aim that the entanglement is distributed between two distant parties with only Gaussian operations and linear optics elements. Moreover, we analyse the logarithmic negativity of the entanglement shared between the two parties when the systems are imperfect and arrive at the conclusion that the logarithmic negativity is asymptotically stable with fluctuations within a certain space range.

A Space State Forecast Model for Dam Construction Equipments Based on Analysis Prediction Theory

Anti-collision equipments system is developed to solve the collision problems of dam construction equipments, and in the system the determination of equipments＇ space state is important. A uniform moving equation of equipments is established based on the analysis prediction theory and the movements states of equipments. Method of least square was employed to deal with discrete data of equipments＇ space position. Fitting equation matched with the movement equation was presented to do data fitting, and a relevant algorithm was given. Applying the fitting equation, current and future space state of equipments can be accurately predicted. Finally, a case is given and results show that numerical values of data were steady and their precision was high. In LongTan dam construction of the equipments antiollision system, applying this method to forecast the equipments＇ space states and practical running of the system indicate that this method can improve the precision of position, obtain the better forecasting effect and increase the robustness of the system.

Applying Neural Network withGenetic Algorithm and FuzzySelection Models to Select Equipmentsfor Fully-Mechanized Coal Mining

According to the typical engineering samples, a neural net work model with genetic algorithm to optimize weight values is put forward to forecast the productivities and efficiencies of mining faces. By this model we can obtain the possible achievements of available equipment combinations under certain geological situations of fully-mechanized coal mining faces. Then theory of fuzzy selection is applied to evaluate the performance of each equipment combination. By detailed empirical analysis, this model integrates the functions of forecasting mining faces' achievements and selecting optimal equipment combination and is helpful to the decision of equipment combination for fully-mechanized coal mining.

Research and Analysis on Cooling Capacity of Temperature Adjustment Equipments in Agricultural Multi-span Greenhouse

The high summer indoor temperature in agricultural greenhouse is not conducive to crop growth,so it is necessary to cool the greenhouse. In this study,taking the agricultural multi-span greenhouse with strong temperature adjustment ability for example,we make an experimental analysis on the temperature changes inside and outside the greenhouse under nine different equipment combinations( fan,skylight,sunshade,sunshade + fan,cooling pad + fan,skylight + fan,sunshade + skylight,sunshade + fan + cooling pad,sunshade + skylight + fan),respectively,and conduct the overall assessment on the measures to cool the summer agricultural greenhouse,in order to provide a reference for selecting a cost-effective cooling method for greenhouse. Tests show that the three treatment modes of fan,sunshade and sunshade + fan almost have no cooling capacity; skylight,sunshade + skylight have cooling capacity,but the effect is slow; cooling pad + fan,sunshade + skylight +fan can reduce the indoor temperature,but the effect is not very good; skylight and fan have good cooling effect; sunshade + fan + cooling pad has obvious cooling effect,which can well meet the cooling needs in the summer greenhouse.