A preliminary study was conducted to outline the laser Raman spectroscopy technique for determination of salinity in the aqueous phase in fluid inclusions. The skewing parameters of the Raman profiles of the calibrat...A preliminary study was conducted to outline the laser Raman spectroscopy technique for determination of salinity in the aqueous phase in fluid inclusions. The skewing parameters of the Raman profiles of the calibration solutions determined were used to derive a calibration curve for the estimation of the equivalent mass fraction NaCl in aqueous solutions. This technique was also verified in the analysis of the natural fluid inclusions from Tongshankou porphyry Cu (Mo) deposit, Hubei Province, China. Although the analyses on the natural fluid inclusions are limited, an acceptable agreement has been reached on the salinities, for most fluid inclusions, determined by the Raman spectroscopy and microthermometry techniques, indicating the reliability of the Raman technique for determination of salinity in fluid inclusion studies.展开更多
Two critical issues in forensic science are identifying body fluid traces found at crime scenes and preserving them for DNA analysis. However, the majority of current biochemical tests for body fluid identification, w...Two critical issues in forensic science are identifying body fluid traces found at crime scenes and preserving them for DNA analysis. However, the majority of current biochemical tests for body fluid identification, which are applicable at the crime scene, are presumptive and destructive to the sample. Raman Spectroscopy provides a suitable alternative to current methods as a nondestructive, confirmatory, and potentially in field method. Our laboratory has developed a chemometric model for the identification of five main body fluids using Raman spectroscopy. This model was developed using samples obtained from healthy donors. Thus, it is of most importance for the forensic application of the method to validate its performance for donors with diseases that might affect the biochemical composition of body fluids. In this study, the developed method was validated using peripheral blood samples acquired from donors with Celiac Disease, Sickle Cell Anemia, and Type 2 Diabetes. It was shown that the method correctly identified all samples as peripheral blood indicating that no false positives could occur because the blood traces were originated from donors suffering from the diseases.展开更多
We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,ind...We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,indicating that Raman quantification of CH4/CO2 molar ratio can be applied to those fluid inclusions(FIs)with high internal pressure(i.e.,>15 MPa).Secondly,the v1(CH4)peak position shifts to lower wavenumber with increasing pressure at constant temperature,confirming that the v1(CH4)peak position can be used to calculate the fluid pressure.However,this method should be carefully calibrated before applying to FI analyses because large discrepancies exist among the reported v1(CH4)-P curves,especially in the highpressure range.These calibrations are applied to CH4-rich FIs in quartz veins of the Silurian Longmaxi black shales in southern Sichuan Basin.The vapor phases of these FIs are mainly composed of CH4 and minor CO2,with CO2 molar fractions from4.4%to 7.4%.The pressure of single-phase gas FI ranges from 103.65 to 128.35 MPa at room temperature,which is higher than previously reported.Thermodynamic calculations supported the presence of extremely high-pressure CH4-saturated fluid(218.03–256.82 MPa at 200°C),which may be responsible for the expulsion of CH4 to adjacent reservoirs.展开更多
The Kendekeke polymetallic deposit,located in the middle part of the magmatic arc belt of Qimantag on the southwestern margin of the Qaidam Basin,is a polygenetic compound deposit in the Qimantag metallogenic belt of ...The Kendekeke polymetallic deposit,located in the middle part of the magmatic arc belt of Qimantag on the southwestern margin of the Qaidam Basin,is a polygenetic compound deposit in the Qimantag metallogenic belt of Qinghai Province.Multi-periodic ore-forming processes occurred in this deposit,including early-stage iron mineralization and lead-zinc-gold-polymetallic mineralization which was controlled by later hydrothermal process.The characteristics of the ore-forming fluids and mineralization were discussed by using the fluid inclusion petrography,Laser Raman Spectrum and micro-thermometry methods.Three stages,namely,S1-stage （copper-iron-sulfide stage）,S2-stage （lead-zinc-sulfide stage） and C-stage （carbonate stage） were included in the hydrothermal process as indicated by the results of this study.The fluid inclusions are in three types：aqueous inclusion （type I）,CO2-aqueous inclusion （type Ⅱ） and pure CO2 inclusion （type Ⅲ）.Type Ⅰ inclusions were observed in the S1-stage,having homogenization temperature at 240-320℃,and salinities ranging from 19.8％ to 25.0％ （wt％ NaCl equiv.）.All three types of inclusions,existing as immiscible inclusion assemblages,were presented in the S2-stage,with the lowest homogenization temperature ranging from 175 ℃ to 295℃,which represents the metallogenic temperature of the S2-stage.The salinities of these inclusions are in the range of 1.5％ to 16％.The fluid inclusions in the C-stage belong to types Ⅰ,Ⅱ and Ⅲ,having homogenization temperatures at 120-210℃,and salinities ranging from 0.9％ to 14.5％.These observations indicate that the ore-forming fluids evolved from high-temperature to low-temperature,from high-salinity to low-salinity,from homogenization to immiscible separation.Results of Laser Raman Spectroscopy show that high density of CO2 and CH4 were found as gas compositions in the inclusions.CO2,worked as the pH buffer of ore-forming fluids,together with reduction of organic gases （i.e.CH4,etc）,affected the transport and sediment of the minerals.The fluid system alternated between open and close systems,namely,between lithostatic pressure and hydrostatic pressure systems.The calculated metallogenic pressures are in the range of 30 to 87 Mpa corresponding to 3 km mineralization depth.Under the influence of tectonic movements,immiscible separation occurred in the original ore-forming fluids,which were derived from the previous high-salinity,high-temperature magmatic fluids.The separation of CO2 changed the physicochemical properties and composition of the original fluids,and then diluted by mixing with extraneous fluids such as meteoric water and groundwater,and metallogenic materials in the fluids such as lead,zinc and gold were precipitated.展开更多
Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfoid in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit, four mineralization ep...Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfoid in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit, four mineralization episodes were identified： melt/fluid coexisting period （O）, skarn period （A）, first sulfide period （B） and second sulfide period （C）, and 10 stages were finally subdivided. Three types of inclusions were classified in seven stages, namely crystal bearing inclusions （type I）, aqueous inclusions （type Ⅱ） and pure liquid inclusions （type Ⅲ）. Type I and Ⅱ inclusions were observed in stage O1, having homogenization temperature from 252 to 431℃, and salinities ranging from 24.3% to 48.0%. Type I inclusion was present in stage A1, having homogenization temperature from 506 to 548℃, and salinities ranging from 39.4% to 44.6%. In stage B1, type Ⅱ and Ⅲ inclusions were observed, with homogenization temperature concentrating between 300-400℃, and salinities from 0.4% to 4.3%. Type II inclusions were present in stage B2, with homogenization temperature varying from 403 to 550℃. In stage C1, type I and II inclusion commonly coexisted, and constituted a boiling inclusion group, having homogenization temperatures at 187-463℃, and salinities in a range of 29.4%-46.8% and 2.2%-11.0%. Type II and III inclusions were developed in stage C2, having homogenization temperature at 124-350℃, and salinities ranging between 1.6% and 15.4%. In stage C3, type Ⅱ and Ⅲ inclusions were presented, with a homogenization temperature range of 164-360℃, and salinities varying from 4.0% to 11.0%. The results of micro-thermal analysis show that fluids are characterized by high temperature and high salinity in stage O1 and A1, and experienced slight decrease in temperature and dramatic decrease in salinity in stage B1 and B2. In stage C1, the salinity of fluid increased greatly and a further decrease of temperature and salinity occurred in stage C2 and C3. Fluids boiled in stage C1. With calculated pressure of 22 MPa from the trapping temperature of 284- 289℃, a mineralization depth of 2.2 km was inferred. Results of Laser Raman Spectroscopy show high density of H2_O, CH_4 and CO_2 were found as gas composition. H-O isotope study indicates the ore- forming fluids were the mixture of magmatic water and meteoric water. Physicochemical parameters of fluids show oxygen and sulfur fugacity experienced a decrease, and redox state is weakly reducing. Along with fluid evolution, oxidation has increased slightly. Comprehensive analysis shows that melt exsolution occurred during the formation of quartz diorite and that metal elements existed and migrated in the form of chlorine complex. Immiscible fluid separation and boiling widely occurred after addition of new fluids, bringing about dissociation of chlorine-complex, resulting in a great deal of copper precipitation. In conclusion, Saishitang deposit, controlled by regional tectonics, is formed by metasomatism between highly fractionated mineralization rock body and wall rock, and belongs to banded skarn Cu-polymetallic deposit.Abstract： Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfoid in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit, four mineralization episodes were identified： melt/fluid coexisting period （O）, skarn period （A）, first sulfide period （B） and second sulfide period （C）, and 10 stages were finally subdivided. Three types of inclusions were classified in seven stages, namely crystal bearing inclusions （type I）, aqueous inclusions （type Ⅱ） and pure liquid inclusions （type Ⅲ）. Type I and II inclusions were observed in stage O1, having homogenization temperature from 252 to 431℃, and salinities ranging from 24.3% to 48.0%. Type I inclusion was present in stage A1, having homogenization temperature from 506 to 548℃, and salinities ranging from 39.4% to 44.6%. In stage B1, type II and III inclusions were observed, with homogenization temperature concentrating between 300-400℃, and salinities from 0.4% to 4.3%. Type II inclusions were present in stage B2, with homogenization temperature varying from 403 to 550℃. In stage C1, type I and II inclusion commonly coexisted, and constituted a boiling inclusion group, having homogenization temperatures at 187-463℃, and salinities in a range of 29.4%-46.8% and 2.2%-11.0%. Type II and III inclusions were developed in stage C2, having homogenization temperature at 124-350℃, and salinities ranging between 1.6% and 15.4%. In stage C3, type II and Ⅲ inclusions were presented, with a homogenization temperature range of 164-360℃, and salinities varying from 4.0% to 11.0%. The results of micro-thermal analysis show that fluids are characterized by high temperature and high salinity in stage O1 and A1, and experienced slight decrease in temperature and dramatic decrease in salinity in stage B1 and B2. In stage C1, the salinity of fluid increased greatly and a further decrease of temperature and salinity occurred in stage C2 and C3. Fluids boiled in stage C1. With calculated pressure of 22 MPa from the trapping temperature of 284- 289℃, a mineralization depth of 2.2 km was inferred. Results of Laser Raman Spectroscopy show high density of H_2O, CH_4 and CO_2 were found as gas composition. H-O isotope study indicates the ore- forming fluids were the mixture of magmatic water and meteoric water. Physicochemical parameters of fluids show oxygen and sulfur fugacity experienced a decrease, and redox state is weakly reducing. Along with fluid evolution, oxidation has increased slightly. Comprehensive analysis shows that melt exsolution occurred during the formation of quartz diorite and that metal elements existed and migrated in the form of chlorine complex. Immiscible fluid separation and boiling widely occurred after addition of new fluids, bringing about dissociation of chlorine-complex, resulting in a great deal of copper precipitation. In conclusion, Saishitang deposit, controlled by regional tectonics, is formed by metasomatism between highly fractionated mineralization rock body and wall rock, and belongs to banded skarn Cu-polymetallic deposit.展开更多
Aim: The elemental composition of the epididymal luminal fluid (ELF) in adult goat ( Capra indica) was investigat-ed. Methods: ELF was collected by micropuncture from twelve sites along the epididymal duct. The elemen...Aim: The elemental composition of the epididymal luminal fluid (ELF) in adult goat ( Capra indica) was investigat-ed. Methods: ELF was collected by micropuncture from twelve sites along the epididymal duct. The elementalcontents was analyzed with inductively coupled plasma (ICP) emission spectroscopy, a microanalytical technique thatcan simultaneously measure many elements in minute volumes of sample. The Na and K concentrations were determinedby flame photometry. Results: ICP spectroscopy showed the presence of copper, calcium, nickel, iron, magne-sium, chromium, titanium and zinc in ELF, with fluctuating levels at different sites along the length of the epididymis.Cadmium, cobalt, lead and manganese were not fotmd. The Na^+ / K^+ ratio was seen to be higher at the initial seg-ments of the epididymis and lower at the distal. Conclusion: It is proposed that the observed characteristic distribu-tion of elements in ELF may have far reaching implications in sperm maturation and storage known to occur in the epi-didymis. (Asian J Androl 2000 Dec; 2: 288-292)展开更多
Nitrogen is an important gas-phase element in geological fluid,and normally hosted in mineralizing fluid,in which the content is very low.Nearly 100% mol pure nitrogen inclusion was discovered in copper-bearing quartz...Nitrogen is an important gas-phase element in geological fluid,and normally hosted in mineralizing fluid,in which the content is very low.Nearly 100% mol pure nitrogen inclusion was discovered in copper-bearing quartz vein from Xikuangshan copper deposit,Dongchuan,Yunnan Province in this research.It is between 3 and 5 μm,in shape of ellipse,occurring in group or independence without obvious orientation,and co-existed with primary gas-liquid inclusions.Inclusion analysis by using laser Raman spectroscopy shows its composition is dominated by nitrogen with minor H2O.High concentration of N2 may be the necessary and sufficient condition for forming this kind of inclusion.It is suggested that there are two genesis modes of pure N2 inclusion in the deposit,oxida-tion-devolativation of mantle matter and trap of metasomatic fluid in organic matter decomposition in Luoxue For-mation dolomite.In conclusion,pure N2 inclusion hardly presents in the ore-forming fluids,which providing a new evidence for the genesis of Xikuangshan type copper deposit.展开更多
Fluid inclusions have recorded the history of degassing in basalt. Some fluid inclusions in olivine and pyroxene phenocrysts of basalt were analyzed by micro-thermometry and Raman spectroscopy in this paper. The exper...Fluid inclusions have recorded the history of degassing in basalt. Some fluid inclusions in olivine and pyroxene phenocrysts of basalt were analyzed by micro-thermometry and Raman spectroscopy in this paper. The experimental results showed that many inclusions are present almost in a pure CO2 system. The densities of some CO2 inclusions were computed in terms of Raman spectroscopic characteristics of CO2 Fermi resonance at room temperature. Their densities change over a wide range, but mainly between 0.044 g/cm3 and 0.289 g/cm3. Their micro-thermometric measurements showed that the CO2 inclusions examined reached homogenization between 1145.5℃ and 1265℃ . The mean value of homogenization temperatures of CO2 inclusions in basalts is near 1210℃. The trap pressures (depths) of inclusions were computed with the equation of state and computer program. Distribution of the trap depths makes it know that the degassing of magma can happen over a wide pressure (depth) range, but mainly at the depth of 0.48 km to 3.85 km. This implicates that basalt magma experienced intensive degassing and the CO2 gas reservoir from the basalt magma also may be formed in this range of depths. The results of this study showed that the depth of basalt magma degassing can be forecasted from CO2 fluid inclusions, and it is meaningful for understanding the process of magma degassing and constraining the inorganogenic CO2 gas reservoir.展开更多
文摘A preliminary study was conducted to outline the laser Raman spectroscopy technique for determination of salinity in the aqueous phase in fluid inclusions. The skewing parameters of the Raman profiles of the calibration solutions determined were used to derive a calibration curve for the estimation of the equivalent mass fraction NaCl in aqueous solutions. This technique was also verified in the analysis of the natural fluid inclusions from Tongshankou porphyry Cu (Mo) deposit, Hubei Province, China. Although the analyses on the natural fluid inclusions are limited, an acceptable agreement has been reached on the salinities, for most fluid inclusions, determined by the Raman spectroscopy and microthermometry techniques, indicating the reliability of the Raman technique for determination of salinity in fluid inclusion studies.
文摘Two critical issues in forensic science are identifying body fluid traces found at crime scenes and preserving them for DNA analysis. However, the majority of current biochemical tests for body fluid identification, which are applicable at the crime scene, are presumptive and destructive to the sample. Raman Spectroscopy provides a suitable alternative to current methods as a nondestructive, confirmatory, and potentially in field method. Our laboratory has developed a chemometric model for the identification of five main body fluids using Raman spectroscopy. This model was developed using samples obtained from healthy donors. Thus, it is of most importance for the forensic application of the method to validate its performance for donors with diseases that might affect the biochemical composition of body fluids. In this study, the developed method was validated using peripheral blood samples acquired from donors with Celiac Disease, Sickle Cell Anemia, and Type 2 Diabetes. It was shown that the method correctly identified all samples as peripheral blood indicating that no false positives could occur because the blood traces were originated from donors suffering from the diseases.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.41922023 and 41830425)the Fundamental Research Funds for the Central Universities(Grant Nos.020614380056 and 020614380078).
文摘We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,indicating that Raman quantification of CH4/CO2 molar ratio can be applied to those fluid inclusions(FIs)with high internal pressure(i.e.,>15 MPa).Secondly,the v1(CH4)peak position shifts to lower wavenumber with increasing pressure at constant temperature,confirming that the v1(CH4)peak position can be used to calculate the fluid pressure.However,this method should be carefully calibrated before applying to FI analyses because large discrepancies exist among the reported v1(CH4)-P curves,especially in the highpressure range.These calibrations are applied to CH4-rich FIs in quartz veins of the Silurian Longmaxi black shales in southern Sichuan Basin.The vapor phases of these FIs are mainly composed of CH4 and minor CO2,with CO2 molar fractions from4.4%to 7.4%.The pressure of single-phase gas FI ranges from 103.65 to 128.35 MPa at room temperature,which is higher than previously reported.Thermodynamic calculations supported the presence of extremely high-pressure CH4-saturated fluid(218.03–256.82 MPa at 200°C),which may be responsible for the expulsion of CH4 to adjacent reservoirs.
基金supported by the China Geological Survey Investigation Programs (No. 2008-21-03 and No. 20110301-64)
文摘The Kendekeke polymetallic deposit,located in the middle part of the magmatic arc belt of Qimantag on the southwestern margin of the Qaidam Basin,is a polygenetic compound deposit in the Qimantag metallogenic belt of Qinghai Province.Multi-periodic ore-forming processes occurred in this deposit,including early-stage iron mineralization and lead-zinc-gold-polymetallic mineralization which was controlled by later hydrothermal process.The characteristics of the ore-forming fluids and mineralization were discussed by using the fluid inclusion petrography,Laser Raman Spectrum and micro-thermometry methods.Three stages,namely,S1-stage （copper-iron-sulfide stage）,S2-stage （lead-zinc-sulfide stage） and C-stage （carbonate stage） were included in the hydrothermal process as indicated by the results of this study.The fluid inclusions are in three types：aqueous inclusion （type I）,CO2-aqueous inclusion （type Ⅱ） and pure CO2 inclusion （type Ⅲ）.Type Ⅰ inclusions were observed in the S1-stage,having homogenization temperature at 240-320℃,and salinities ranging from 19.8％ to 25.0％ （wt％ NaCl equiv.）.All three types of inclusions,existing as immiscible inclusion assemblages,were presented in the S2-stage,with the lowest homogenization temperature ranging from 175 ℃ to 295℃,which represents the metallogenic temperature of the S2-stage.The salinities of these inclusions are in the range of 1.5％ to 16％.The fluid inclusions in the C-stage belong to types Ⅰ,Ⅱ and Ⅲ,having homogenization temperatures at 120-210℃,and salinities ranging from 0.9％ to 14.5％.These observations indicate that the ore-forming fluids evolved from high-temperature to low-temperature,from high-salinity to low-salinity,from homogenization to immiscible separation.Results of Laser Raman Spectroscopy show that high density of CO2 and CH4 were found as gas compositions in the inclusions.CO2,worked as the pH buffer of ore-forming fluids,together with reduction of organic gases （i.e.CH4,etc）,affected the transport and sediment of the minerals.The fluid system alternated between open and close systems,namely,between lithostatic pressure and hydrostatic pressure systems.The calculated metallogenic pressures are in the range of 30 to 87 Mpa corresponding to 3 km mineralization depth.Under the influence of tectonic movements,immiscible separation occurred in the original ore-forming fluids,which were derived from the previous high-salinity,high-temperature magmatic fluids.The separation of CO2 changed the physicochemical properties and composition of the original fluids,and then diluted by mixing with extraneous fluids such as meteoric water and groundwater,and metallogenic materials in the fluids such as lead,zinc and gold were precipitated.
基金supported by the China Geological Survey Investigation Programs (No.2006BAA01B06 and No.20089942)
文摘Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfoid in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit, four mineralization episodes were identified： melt/fluid coexisting period （O）, skarn period （A）, first sulfide period （B） and second sulfide period （C）, and 10 stages were finally subdivided. Three types of inclusions were classified in seven stages, namely crystal bearing inclusions （type I）, aqueous inclusions （type Ⅱ） and pure liquid inclusions （type Ⅲ）. Type I and Ⅱ inclusions were observed in stage O1, having homogenization temperature from 252 to 431℃, and salinities ranging from 24.3% to 48.0%. Type I inclusion was present in stage A1, having homogenization temperature from 506 to 548℃, and salinities ranging from 39.4% to 44.6%. In stage B1, type Ⅱ and Ⅲ inclusions were observed, with homogenization temperature concentrating between 300-400℃, and salinities from 0.4% to 4.3%. Type II inclusions were present in stage B2, with homogenization temperature varying from 403 to 550℃. In stage C1, type I and II inclusion commonly coexisted, and constituted a boiling inclusion group, having homogenization temperatures at 187-463℃, and salinities in a range of 29.4%-46.8% and 2.2%-11.0%. Type II and III inclusions were developed in stage C2, having homogenization temperature at 124-350℃, and salinities ranging between 1.6% and 15.4%. In stage C3, type Ⅱ and Ⅲ inclusions were presented, with a homogenization temperature range of 164-360℃, and salinities varying from 4.0% to 11.0%. The results of micro-thermal analysis show that fluids are characterized by high temperature and high salinity in stage O1 and A1, and experienced slight decrease in temperature and dramatic decrease in salinity in stage B1 and B2. In stage C1, the salinity of fluid increased greatly and a further decrease of temperature and salinity occurred in stage C2 and C3. Fluids boiled in stage C1. With calculated pressure of 22 MPa from the trapping temperature of 284- 289℃, a mineralization depth of 2.2 km was inferred. Results of Laser Raman Spectroscopy show high density of H2_O, CH_4 and CO_2 were found as gas composition. H-O isotope study indicates the ore- forming fluids were the mixture of magmatic water and meteoric water. Physicochemical parameters of fluids show oxygen and sulfur fugacity experienced a decrease, and redox state is weakly reducing. Along with fluid evolution, oxidation has increased slightly. Comprehensive analysis shows that melt exsolution occurred during the formation of quartz diorite and that metal elements existed and migrated in the form of chlorine complex. Immiscible fluid separation and boiling widely occurred after addition of new fluids, bringing about dissociation of chlorine-complex, resulting in a great deal of copper precipitation. In conclusion, Saishitang deposit, controlled by regional tectonics, is formed by metasomatism between highly fractionated mineralization rock body and wall rock, and belongs to banded skarn Cu-polymetallic deposit.Abstract： Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfoid in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit, four mineralization episodes were identified： melt/fluid coexisting period （O）, skarn period （A）, first sulfide period （B） and second sulfide period （C）, and 10 stages were finally subdivided. Three types of inclusions were classified in seven stages, namely crystal bearing inclusions （type I）, aqueous inclusions （type Ⅱ） and pure liquid inclusions （type Ⅲ）. Type I and II inclusions were observed in stage O1, having homogenization temperature from 252 to 431℃, and salinities ranging from 24.3% to 48.0%. Type I inclusion was present in stage A1, having homogenization temperature from 506 to 548℃, and salinities ranging from 39.4% to 44.6%. In stage B1, type II and III inclusions were observed, with homogenization temperature concentrating between 300-400℃, and salinities from 0.4% to 4.3%. Type II inclusions were present in stage B2, with homogenization temperature varying from 403 to 550℃. In stage C1, type I and II inclusion commonly coexisted, and constituted a boiling inclusion group, having homogenization temperatures at 187-463℃, and salinities in a range of 29.4%-46.8% and 2.2%-11.0%. Type II and III inclusions were developed in stage C2, having homogenization temperature at 124-350℃, and salinities ranging between 1.6% and 15.4%. In stage C3, type II and Ⅲ inclusions were presented, with a homogenization temperature range of 164-360℃, and salinities varying from 4.0% to 11.0%. The results of micro-thermal analysis show that fluids are characterized by high temperature and high salinity in stage O1 and A1, and experienced slight decrease in temperature and dramatic decrease in salinity in stage B1 and B2. In stage C1, the salinity of fluid increased greatly and a further decrease of temperature and salinity occurred in stage C2 and C3. Fluids boiled in stage C1. With calculated pressure of 22 MPa from the trapping temperature of 284- 289℃, a mineralization depth of 2.2 km was inferred. Results of Laser Raman Spectroscopy show high density of H_2O, CH_4 and CO_2 were found as gas composition. H-O isotope study indicates the ore- forming fluids were the mixture of magmatic water and meteoric water. Physicochemical parameters of fluids show oxygen and sulfur fugacity experienced a decrease, and redox state is weakly reducing. Along with fluid evolution, oxidation has increased slightly. Comprehensive analysis shows that melt exsolution occurred during the formation of quartz diorite and that metal elements existed and migrated in the form of chlorine complex. Immiscible fluid separation and boiling widely occurred after addition of new fluids, bringing about dissociation of chlorine-complex, resulting in a great deal of copper precipitation. In conclusion, Saishitang deposit, controlled by regional tectonics, is formed by metasomatism between highly fractionated mineralization rock body and wall rock, and belongs to banded skarn Cu-polymetallic deposit.
文摘Aim: The elemental composition of the epididymal luminal fluid (ELF) in adult goat ( Capra indica) was investigat-ed. Methods: ELF was collected by micropuncture from twelve sites along the epididymal duct. The elementalcontents was analyzed with inductively coupled plasma (ICP) emission spectroscopy, a microanalytical technique thatcan simultaneously measure many elements in minute volumes of sample. The Na and K concentrations were determinedby flame photometry. Results: ICP spectroscopy showed the presence of copper, calcium, nickel, iron, magne-sium, chromium, titanium and zinc in ELF, with fluctuating levels at different sites along the length of the epididymis.Cadmium, cobalt, lead and manganese were not fotmd. The Na^+ / K^+ ratio was seen to be higher at the initial seg-ments of the epididymis and lower at the distal. Conclusion: It is proposed that the observed characteristic distribu-tion of elements in ELF may have far reaching implications in sperm maturation and storage known to occur in the epi-didymis. (Asian J Androl 2000 Dec; 2: 288-292)
基金supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(Grant Nos.KZCX2-YW-111-03 and KZCX2-YW-136-2)the National '973 Project'(No.2009CB421003)the Foundation of State Key Lab
文摘Nitrogen is an important gas-phase element in geological fluid,and normally hosted in mineralizing fluid,in which the content is very low.Nearly 100% mol pure nitrogen inclusion was discovered in copper-bearing quartz vein from Xikuangshan copper deposit,Dongchuan,Yunnan Province in this research.It is between 3 and 5 μm,in shape of ellipse,occurring in group or independence without obvious orientation,and co-existed with primary gas-liquid inclusions.Inclusion analysis by using laser Raman spectroscopy shows its composition is dominated by nitrogen with minor H2O.High concentration of N2 may be the necessary and sufficient condition for forming this kind of inclusion.It is suggested that there are two genesis modes of pure N2 inclusion in the deposit,oxida-tion-devolativation of mantle matter and trap of metasomatic fluid in organic matter decomposition in Luoxue For-mation dolomite.In conclusion,pure N2 inclusion hardly presents in the ore-forming fluids,which providing a new evidence for the genesis of Xikuangshan type copper deposit.
文摘Fluid inclusions have recorded the history of degassing in basalt. Some fluid inclusions in olivine and pyroxene phenocrysts of basalt were analyzed by micro-thermometry and Raman spectroscopy in this paper. The experimental results showed that many inclusions are present almost in a pure CO2 system. The densities of some CO2 inclusions were computed in terms of Raman spectroscopic characteristics of CO2 Fermi resonance at room temperature. Their densities change over a wide range, but mainly between 0.044 g/cm3 and 0.289 g/cm3. Their micro-thermometric measurements showed that the CO2 inclusions examined reached homogenization between 1145.5℃ and 1265℃ . The mean value of homogenization temperatures of CO2 inclusions in basalts is near 1210℃. The trap pressures (depths) of inclusions were computed with the equation of state and computer program. Distribution of the trap depths makes it know that the degassing of magma can happen over a wide pressure (depth) range, but mainly at the depth of 0.48 km to 3.85 km. This implicates that basalt magma experienced intensive degassing and the CO2 gas reservoir from the basalt magma also may be formed in this range of depths. The results of this study showed that the depth of basalt magma degassing can be forecasted from CO2 fluid inclusions, and it is meaningful for understanding the process of magma degassing and constraining the inorganogenic CO2 gas reservoir.
