PREPARATION AND FLUORESCENT PROPERTIES OF Eu^(3+)-CONTAINING CORE-SHELL NANOPARTICLES

By using a two-stage soapless emulsion polymerization, four kinds of core-shell nanoparticles have been prepared,which are composed of a polystyrene core having an average diameter of 256 nm and a poly(methyl methacrylate-co-acrylicacid) shell. The transmission electron microscopy (TEM) micrographs and the atomic force microscopy (AFM) imagesevidenced the presence of a core-shell structure. In the infrared spectra, the shift of v_(COOH) to lower wavenumber withincreasing Eu^(3+) ion content indicates that coordination between the oxygen of the carboxylic group and Eu^(3+) has occurred.The fluorescence intensity of ~5D_0-~7F_2 transition was observed to reach its maximum with a carboxyl group molar percentageof 40% in the shell and an Eu^(3+)/--COO^- molar ratio of 1:3. The fluorescence intensity ratio of ~5D_0-~7F_2 to ~5D_0-~7F_1 transition reached its maximum with an Eu^(3+)/--COO^- molar ratio of 1:3 for all the four series.

Ni@Pd core-shell nanoparticles supported on a metal-organic framework as highly efficient catalysts for nitroarenes reduction

Ni@Pd core-shell nanoparticles with a mean particle size of 8–9 nm were prepared by solvothermal reduction of bivalent nickel and palladium in oleylamine and trioctylphosphine.Subsequently,the first-ever deposition of Ni@Pd core-shell nanoparticles having different compositions on a metal-organic framework（MIL-101）was accomplished by wet impregnation in n-hexane.The Ni@Pd/MIL-101 materials were characterized by powder X-ray diffraction,Fourier transform infrared spectroscopy,transmission electron microscopy,and energy-dispersive X-ray spectroscopy and also investigated as catalysts for the hydrogenation of nitrobenzene under mild reaction conditions.At 30 °C and 0.1 MPa of H2 pressure,the Ni@Pd/MIL-101 gives a TOF as high as 375 h–1 for the hydrogenation of nitrobenzene and is applicable to a wide range of substituted nitroarenes.The exceptional performance of this catalyst is believed to result from the significant Ni-Pd interaction in the core-shell structure,together with promotion of the conversions of aromatics by uncoordinated Lewis acidic Cr sites on the MIL-101 support.

Fabrication of Cu_2O@Cu_2O core-shell nanoparticles and conversion to Cu_2O@Cu core-shell nanoparticles in solution

Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive ascorbic acid (AA) in air at room temperature, which was an interesting phenomenon. The features of the two kinds of NPs were characterized by XRD, TEM and extinction spectra. Cu2O@Cu NPs with different shell thicknesses showed wide tunable optical properties for the localized surface plasmon (LSP) in metallic Cu. But Cu2O@Cu2O NPs did not indicate this feature. FTIR results reveal that Cu+ ions on the surface of Cu2O shell coordinate with N and O atoms in PVP and are further reduced to metallic Cu by excessive AA and then form a nucleation site on the surface of Cu2O nanocrystalline. PVP binds onto different sites to proceed with the reduction utill all the Cu sources in Cu2O shell are completely assumed.

Photostable and Biocompatible Fluorescent Silicon Nanoparticles for Imaging-Guided Co-Delivery of siRNA and Doxorubicin to Drug-Resistant Cancer Cells

The development of effective and safe vehicles to deliver small interfering RNA(siRNA) and chemotherapeutics remains a major challenge in RNA interference-based combination therapy with chemotherapeutics,which has emerged as a powerful platform to treat drug-resistant cancer cells.Herein,we describe the development of novel all-in-one fluorescent silicon nanoparticles(SiNPs)-based nanomedicine platform for imaging-guided co-delivery of siRNA and doxorubicin(DOX).This approach enhanced therapeutic efficacy in multidrug-resistant breast cancer cells(i.e.,MCF-7/ADR cells).Typically,the SiNP-based nanocarriers enhanced the stability of siRNA in a biological environment(i.e.,medium or RNase A) and imparted the responsive release behavior of siRNA,resulting in approximately 80% down-regulation of P-glycoprotein expression.Co-delivery of P-glycoprotein siRNA and DOX led to>35-fold decrease in the half maximal inhibitory concentration of DOX in comparison with free DOX,indicating the pronounced therapeutic efficiency of the resultant nanocomposites for drug-resistant breast cancer cells.The intracellular time-dependent release behaviors of siRNA and DOX were revealed through tracking the strong and stable fluorescence of SiNPs.These data provide valuable information for designing effective RNA interference-based co-delivery carriers.

The Recent Advances of Fluorescent Sensors Based on Molecularly Imprinted Fluorescent Nanoparticles for Pharmaceutical Analysis

Fluorescent nanoparticles have good chemical stability and photostability,controllable optical properties and larger stokes shift.In light of their designability and functionability,the fluorescent nanoparticles are widely used as the fluorescent probes for diverse applications.To enhance the sensitivity and selectivity,the combination of the fluorescent nanoparticles with the molecularly imprinted polymer,i.e.molecularly imprinted fluorescent nanoparticles(MIFN),was an effective way.The sensor based on MIFN(the MIFN sensor)could be more compatible with the complex sample matrix,which was especially widely adopted in medical and biological analysis.In this mini-review,the construction method,detective mechanism and types of MIFN sensors are elaborated.The current applications of MIFN sensors in pharmaceutical analysis,including pesticides/herbicide,veterinary drugs/drugs residues and human related proteins,are highlighted based on the literature in the recent three years.Finally,the research prospect and development trend of the MIFN sensor are forecasted.

Preparation and Characterization of Carboxyl Functionalized Fluorescent Mesoporous Silica Nanoparticles Containing 8-Hydroxyquinolinate Zinc Complexes

Fluorescent mesoporous silica nanoparticles functionalized with carboxyl group(Znq-CMSCOOH) were successfully synthesized by in situ formation route of 8-hydroxyquinolinate zinc complexes in channels of mesoporous silica nanoparticles and post-grafting of carboxyl group on the surface. Moreover,the particle size and structural properties of Znq-CMS-COOH were characterized by transmission electron microscopy(TEM),field emission scanning electron microscopy(FE-SEM),dynamic light scattering(DLS),Fourier transform infrared spectroscopy(FT-IR),UV-vis spectrometer, fluorescence spectrometer and nitrogen adsorption-desorption measurements. The obtained results suggest that the Znq-CMS-COOH presents the uniform spherical shape with the mean diameter of about 85 nm and the obvious wormhole arrangement mesoporous. In addition, the Znq-CMS-COOH possesses green fluorescence with the emission peaks at 495 nm. So the Znq-CMS-COOH, which is beneficial to further modification and tracing, might be a great potential carrier for applying in drug delivery system in the future.

Synthesis of Ni@Au Core-shell Nanoparticles and Its Applications in Ullmann Reaction as a Synergistic Catalyst

The Ni@Au core-shell nanoparticles had been successfully synthesized from aqueous solution by one-step route at room temperature. The Ni@Au nanoparticles can be an excellent catalyst for Ullmann reaction. The advantage of Ni@Au is that the catalyst does not need additional reducing agents. The Au shell can effectively protect the Ni core from oxidation. The Ni core and Au shell have both composited in structure and cooperated in function.

Preparation and Characterization of Nano-Sized (Mg_(x)Fe_(1–x)O/SiO₂) (x = 0.1) Core-Shell Nanoparticles by Chemical Precipitation Method

Magnetic core-shell nanoparticles have been widely studied because of their excellent and convenient magnetic and electrical properties.In this present work core-shell magneticnanoparticles (MNPs) were synthesized by simple chemical precipitation method. Firstly Mg(x)Fe(1–x)O (magnesiwuestite) nano powder samples were synthesised by low temperature chemical combustion method. Secondly the as synthesised Mg(x)Fe(1–x)O nanoparticles are used to synthesis magnetic core-shell Nano particles byusing 2-propanol, poly ethylene glycol (PEG), ammonia solution 30 wt%, tetraethyl orthosilicate (TEOS). Separation of the core-shell magnetic nanoparticles from the aqueous suspension using a centrifuge. The synthesised MNPs and core shell MNP were characterized by X-ray diffraction (XRD), Thermal gravimetric-differential thermal analyzer (TG-DTA), Transmission electron microscopy (TEM), scanning electron microscopy (SEM), (EDAX) for structural, thermal and morphological respectively. It is observed that the particle size of spherical sampleis 32.5 nm.

Shell-driven Fine Structure Transition of Core Materials in Co@Au Core-shell Nanoparticles

Co@Au core shell nanoparticles(NPs) of different shell thicknesses were fabricated by a combination of the displacement process and the reduction-deposition process in a microfluidic reactor. The effect of the shell thickness on the fine structures(local atom arrangement) of core materials was investigated by X-ray Absorption Near Edge Structure(XANES) and Extended X-ray Absorption Fine Structure(EXAFS).The results indicate that the shell thickness affects the fine structure of the core materials by causing atomic re-arrangement between the hexagonal close pack(hcp) and the face centered cubic(fcc) structure, and forming Co-Au bonds in the core-shell interface.

Synthesis and characterization of new fluorescent nanoparticles

A novel kind of fluorescent nanoparticles（FNPs）has been prepared using a precipitation polymerization method.Methacrylic acid,trimethylolpropane trimethacrylate and azobisisobutyronitrile were used as functional-monomer,cross-linker and initiator, respectively.Compared with other fluorescent nanoparticles,the FNPs have the characteristics including low dye leakage and good photostability.The fluorescence microscopy imaging indicates that the FNPs can be used as fluorescent labels in bioanalysis.

Novel Terbium Chelate Doped Fluorescent Silica Nanoparticles

Novel terbium chelate doped silica fluorescent nanoparticles were prepared and characterized. The preparation was carried out in water-in-oil （W/O） microemulsion containing monomer precursor （pAB-DTPAA-APTEOS）, Triton X-100, n-hexanol, and cyclohexane by controlling copolymerization of tetraethyl orthosilicate and 3-aminopropyl-triethyloxysilane. The nanoparticles are spherical and uniform in size, about 30 nm in diameter, strongly fluorescent, and highly stable. The amino groups directly introduced to the surface of the nanoparticles using APTEOS during preparation made the surface modification and bioconjugation of the nanoparticles easier. The nanoparticles are expected as an efficient timeresolved luminescence biological label.

Raman scattering in In/InOx core-shell structured nanoparticles

The properties of Raman phonons are very important due to the fact that they can availably reflect some important physical information. An abnormal Raman peak is observed at about 558 cm-1 in In film composed of In/InOx core-shell structured nanoparticles, and the phonon mode stays very stable when the temperature changes. Our results indicate that this Raman scattering is attributed to the existence of incomplete indium oxide in the oxide shell.

Fluorescent Superparamagnetic Core-Shell Nanostructures: Facile Synthesis of Fe@C-CN_xParticles for Reusable Photocatalysts

Synthesis and characterization of hybrid fluorescent superparamagnetic core-shell particles of Fe@C-CNx composition are presented for the first time. The prepared Fe@C-CNx hybrid nanoparticles were found to possess multifunctionality by exhibiting strong superparamagnetic properties and bright fluorescence emissions at 500 nm after the excitation with light in the UV-visible range. Fe@C-CNx also exhibits photocatalytic activities for organic dye degradation comparable to pure amorphous CNx with reusability through magnetic separation. The combination of magnetic and fluorescent properties of core-shell Fe@C-CNx nanoparticles opens opportunities for their application as sensors and magnet manipulated reusable photocatalysts. Superparamagnetic Fe@C core-shell nanoparticles were used as the template material in the synthesis, where the carbon shell was functionalized through one-step free-radical addition of alkyl groups terminated with carboxylic acid moieties. The method utilizes the organic acyl peroxide of dicarboxylic acid (succinic acid peroxide) as a non-oxidant functional free radical precursor for functionalization. Further, covalently functionalized succinyl-Fe@C core-shell nanoparticles were coated with the amorphous carbon nitride (CNx) generated by an in-situ solution-based chemical reaction of cyanuric chloride with lithium nitride. A detailed physicochemical characterization of the microstructure, magnetic and fluorescence properties of the synthesized hybrid nanoparticles is provided.

Synthesis of Octylmethoxycinamate-silica Core-shell Nanoparticles with Self-templating Method

t A self-templating method was employed to synthesize core-shell nanoparticles with octylmethoxycinamate（OMC）, a well-known organic UV absorber, as core and nanosilica particles as shell. The characteristic of this method is that the whole process requires neither surface treatment for nanosilica particles nor additional surfactant or stabilizer, and all the reactions could be finished in one-pot, which exempts removing template and reduces reaction steps compared to the conventional process. The morphology, structure, particle size distribution, chemical composition and optical property of OMC-SiO2 nanoparticles were characterized by scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, dynamic light scattering（DLS）, FTIR spectrometry and UV absorption spectrometry, respectively. Experiment results indicate that the resulting OMC-SiO2 nanoparticles were perfectly spherical with smooth particle surfaces, and had clear core-shell structures. The particle size could be tuned by altering reaction conditions. In addition, the mechanism of the self-templating method for forming core-shell nanoparticles was discussed.

Memory Effect up to Room-temperature in Ni/Ni_2P Core-shell Structured Nanoparticles

Memory effect has been studied in the system using magnetic nanoparticles with Ni nanocore encapsulated by non-magnetic and oxidation-resistant Ni2P nanoshell acquired through surface-phosphatizing Ni nanoparticles. The self-assembled array with interparticle spacing of about 6 nm shows memory effect up to 200 K below its average blocking temperature of 260 K. And reducing the interparticle spacing of the self-assembled array via annealing can further enlarge the temperature range of memory effect up to room-temperature. The memory effect can be understood based on the thermal relaxation theory of single-domain magnetic nanoparticles. Furthermore, the read-write magnetic coding is realized based on the temperature changes, using the memory effect up to room-temperature, which may be useful for future memory devices.

Synthesis and Characterization of Poly (Methyl Methacrylate)/Polyethylenimine Grafting Core-Shell Nanoparticles for CO2 Adsorption Using Soap-Free Emulsion Copolymerization

Unlike previous emulsion polymerization, we used grafting reactions in soap-free emulsion systems. In this study, we synthesized grafted PMMA/PEI core-shell nanoparticles by varying the MMA/PEI content and molecular weight of PEI (Mn = 600, 8000, and 10,000). The size and morphology of the core-shell nanoparticles were characterized by a particle size analyzer and scanning electron microscopy. The nanoparticles were 178 - 408 nm in diameter and swelled in water or methanol by 30 - 75 nm. The size of the nanoparticles increased with MMA contents, whereas the size distribution progressively became homogeneous with increasing molecular weight of PEI. Lastly, we measured CO2 adsorption capacity of the grafted PMMA/PEI core-shell nanoparticles, and we found the capacity to be limited at a level of 0.69 mg, which occurred for nanoparticles prepared from emulsions at a pH value of 11.

Au-nanocluster-loaded human serum albumin nanoparticles with enhanced cellular uptake for fluorescent imaging

Protein-directed fluorescent Au nanoclusters have been widely studied owing to their potential applications in sensing,imaging,and drug and gene delivery.However,the use of nanoclusters in drug delivery is limited by low cellular uptake.In this study,human serum albumin-directed Au nanoclusters served as building blocks to obtain protein nanoparticles by desolvation.The nanoparticles had a decent quantum yield(QY),high colloidal stability and low cytotoxicity,and they could be readily conjugated with biological molecules.The cellular uptake of the Au nanoclusters and nanocluster-loaded protein nanoparticles were studied by confocal fluorescence microscopy.Agglomeration of the protein-directed Au nanoclusters into 50–150-nm nanoparticles dramatically increased the cellular uptake.

A Comparative Study on the Selected Area Electron Diffraction Pattern of Fe Oxide/Au Core-shell Structured Nanoparticles

The selected area electron diffraction （SAED） pattern of magnetic iron oxide core/gold shell nanoparticles has been studied. For the composite particles with mean size less than 10 nm, their SAED pattern is found to be different from either the pattern of pure Fe oxide nanoparticles or that of pure Au particles. Based on the fact that the ring diameters of these composite particles fit the characteristic relation for the fcc structure, the Au atoms on surfaces of the concerned particles are supposed to pack in a way more tightly than they usually do in pure Au nanoparticles. The driving force for this is the coherency strain which enables the shell material at the heterostructured interface to adapt the lattice parameters of the core.

Preparation and Characterization of Silica and Clay-Silica Core-Shell Nanoparticles Using Sol-Gel Method

Silica and montmorillonite-supported silica nanoparticles were prepared via an acid one step sol-gel process. The synthesized solids were characterized using XRD, FTIR, TEM and N2 adsorption. The effect of preparing temperatures on the structure and properties of the silica nanoparticles were studied. The results show that the increase of annealing temperature from 25 to 200℃, don’t change amorphous state of silica. While for montmorillonite-supported silica the clay platelets are delaminated during the sol-gel process. TEM results showed that the average particle size of silica is increased by increasing temperature due to the particle sintering and the clay-silica nanoparticles possessed core–shell morphology with diameter of 29 nm. The surface area measurements showed that by increasing annealing temperature the surface area was decreased due to aggregation of particle. The clay-silica sample showed lower average pore width than that of the silica prepared at 200℃ indicating that it has a macropores structure. The adsorption efficiency of the prepared samples was tested by adsorption of protoporphyrin IX. The highest adsorption efficiency was found for SiO2 prepared at 200℃. Temkin model describe the equilibrium of adsorption of protoporphyrin IX on caly-silica nanoparticles under different conditions.

Synthesis and Characterization of Bimetallic Gold-Silver Core-Shell Nanoparticles: A Green Approach

Bimetallic gold-silver core-shell nanoparticles were prepared by chemical reduction in aqueous solution, following a method that was friendly to the environment, allowing us to use this for medicinal purposes. Gold nanoparticles were synthesized, and silver cations were then reduced on the nanoparticles. Using the optical properties of metallic nanoparticles, surface plasmon resonance was determined by UV-Vis spectroscopy, and the values obtained for gold and silver were approximately 520 nm and 400 nm in wavelength, respectively. The absorption peaks of the surface plasmon band show a clear red-shift due to size effect in the case of the silver surface, and a plasmon coupling effect, in the case of gold. To obtain a better understanding of the coating conditions, high resolution transmission electron microscopy was used. The average hydrodynamic size and the size distribution of the synthesized nanoparticles were obtained by dynamic light scattering. The development of this process, which is benign for the environment, opens the possibility for many applications in the areas of renewable energy, medicine and biology.