Determination of Yttrium in Lanthanum Oxide by PTFE Fluorinating Technique Combined with ETV-ICP-AES

In this study,fluorinating vaporization combined with ETV-ICP-AES technique was used to determine yttrium for which refractory carbide is easily formed.The absolute detection limit is 12 pg,and three-order magnitude of improvement is obtained in comparison with the conventional vaporization ETV-ICP-AES.No memory effect is observed.The relative standard deviation is better than 5%.Some factors affecting fluorinating vaporization,including matrix effect are discussed.This technique is applied to determine yttrium in La_2O_3.

Synthesis of novel chiral fluorinating agents,(+)-and(-)-N-fluoro-3-methyl-3-(4-methylphenyl)-2H-benzo[e][1,2]thiazine-1,1,4-triones

Treatment of N-t-butylbenzenesulfonamide with an excess of BuLi, followed by the reaction with methyl 2-（4-methylphenyl）propanoate, gave the corresponding 2-carboxybenzenesulfonamide, which underwent a sequence of consecutive N-deprotective cyclization process mediated by TMSCI-NaI-MeCN reagent to afford the N-sulfonylimine. Following the bromination and ring expansion, 3-methyl-3-（4-methylphenyl）-2H-benzo[e][1,2]thiazine-l,l,4-trione was obtained. Optical resolution of the racemic benzosultam using （-）-menthoxyacetyl chloride, furnished the optically p.ure （＋）- and （-）-3-methyl-3-（4-methylphenyl）-2H- benzo[e][1,2]thiazine-1,1,4-triones, which were fluorinated with FC103 to produce the corresponding chiral N-F agents.

Unique double-layer solid electrolyte interphase formed with fluorinated ether-based electrolytes for high-voltage lithium metal batteries

Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the degradation of layered oxides and the decomposition of electrolyte at high voltage,as well as the high reactivity of metallic Li.The key is the development of stable electrolytes against both highvoltage cathodes and Li with the formation of robust interphase films on the surfaces.Herein,we report a highly fluorinated ether,1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy)methoxy]ethane(TTME),as a cosolvent,which not only functions as a diluent forming a localized high concentration electrolyte(LHCE),but also participates in the construction of the inner solvation structure.The TTME-based electrolyte is stable itself at high voltage and induces the formation of a unique double-layer solid electrolyte interphase(SEI)film,which is embodied as one layer rich in crystalline structural components for enhanced mechanical strength and another amorphous layer with a higher concentration of organic components for enhanced flexibility.The Li||Cu cells display a noticeably high Coulombic efficiency of 99.28%after 300 cycles and Li symmetric cells maintain stable cycling more than 3200 h at 0.5 mA/cm^(2) and 1.0m Ah/cm^(2).In addition,lithium metal cells using LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) and Li CoO_(2) cathodes(both loadings~3.0 m Ah/cm^(2))realize capacity retentions of>85%over 240 cycles with a charge cut-off voltage of 4.4 V and 90%for 170 cycles with a charge cut-off voltage of 4.5 V,respectively.This study offers a bifunctional ether-based electrolyte solvent beneficial for high-voltage Li metal batteries.

Fluorine-Modulated MXene-Derived Catalysts for Multiphase Sulfur Conversion in Lithium-Sulfur Battery

Fluorine owing to its inherently high electronegativity exhibits charge delocalization and ion dissociation capabilities;as a result,there has been an influx of research studies focused on the utilization of fluorides to optimize solid electrolyte interfaces and provide dynamic protection of electrodes to regulate the reaction and function performance of batteries.Nonetheless,the shuttle effect and the sluggish redox reaction kinetics emphasize the potential bottlenecks of lithium-sulfur batteries.Whether fluorine modulation regulate the reaction process of Li-S chemistry?Here,the TiOF/Ti_(3)C_(2)MXene nanoribbons with a tailored F distribution were constructed via an NH4F fluorinated method.Relying on in situ characterizations and electrochemical analysis,the F activates the catalysis function of Ti metal atoms in the consecutive redox reaction.The positive charge of Ti metal sites is increased due to the formation of O-Ti-F bonds based on the Lewis acid-base mechanism,which contributes to the adsorption of polysulfides,provides more nucleation sites and promotes the cleavage of S-S bonds.This facilitates the deposition of Li_(2)S at lower overpotentials.Additionally,fluorine has the capacity to capture electrons originating from Li_(2)S dissolution due to charge compensation mechanisms.The fluorine modulation strategy holds the promise of guiding the construction of fluorine-based catalysts and facilitating the seamless integration of multiple consecutive heterogeneous catalytic processes.

A new fluorocarbon adhesive:Inhibiting agglomeration during combustion of propellant via efficient F-Al_(2)O_(3) preignition reaction

Inhibiting the agglomeration of molten aluminum particles packed in the binder network is a promising scheme to achieve efficient combustion of solid propellants.In this investigation,the hydroxyl-terminated structured fluorinated alcohol compound(PFD)was introduced to modify the traditional polyethylene glycol/polytetrahydrofuran block copolymerization(HTPE)binder;that is,a unique fluorinated polyether(FTPE)binder was synthesized by embedding fluorinated organic segments into the HTPE binder via crosslinking curing.The FTPE was applied in aluminum-based propellants for the first time.Due to the complete release of fluorinated organic active segments in the range of 300℃to 400℃,the burning rate of FTPEbased propellant increased from 4.07(0%PFD)to 6.36 mm/s(5%PFD),increased by 56.27%under 1 MPa.The reaction heat of FTPE propellants increased from 5.95(0%PFD)to 7.18 MJ/kg(5%PFD)under 3.0 MPa,indicating that HTPE binder modified with PFD would be conducive to inhibiting the D90 of condensed combustion products(CCPs)dropped by 81.84%from 75.46(0%PFD)to 13.71μm(5%PFD)under 3.0 MPa,in consistent with the significant reduction of aluminum agglomerates observed on the quenched burning surface of the propellants.Those results demonstrated that a novel FTPE binder with PFD can release fluorinated organic active segments,which motivate preignition reaction with the alumina shell in the early stage of aluminum combustion,and then enhance the melting diffusion effect of aluminum to inhibit the agglomeration.

Lithium-ion and solvent co-intercalation enhancing the energy density of fluorinated graphene cathode

Fluorinated carbons CF_xhold the highest theoretical energy density(e.g.,2180 W h kg^(-1)when x=1)among all cathode materials of lithium primary batteries.However,the low conductivity and severe polarization limit it to achieve its theory.In this study,we design a new electrolyte,namely 1 M LiBF_(4)DMSO:DOL(1:9 vol.),achieving a high energy density in Li/CF_xprimary cells.The DMSO with a small molecular size and high donor number successfully solvates Li^(+)into a defined Li^(+)-solvation structure.Such solvated Li^(+)can intercalate into the large-spacing carbon layers and achieve an improved capacity.Consequently,when discharged to 1.0 V,the CF_(1.12)cathode demonstrates a specific capacity of 1944 m A h g^(-1)with a specific energy density of 3793 W h kg^(-1).This strategy demonstrates that designing the electrolyte is powerful in improving the electrochemical performance of CF_(x) cathode.

Durable poly(binaphthyl-co-p-terphenyl piperidinium)-based anion exchange membranes with dual side chains

Building well-developed ion-conductive highways is highly desirable for anion exchange membranes(AEMs).Grafting side chain is a highly effective approach for constructing a well-defined phaseseparated morphological structure and forming unblocked ion pathways in AEMs for fast ion transport.Fluorination of side chains can further enhance phase separation due to the superhydrophobic nature of fluorine groups.However,their electronic effect on the alkaline stability of side chains and membranes is rarely reported.Here,fluorine-containing and fluorine-free side chains are introduced into the polyaromatic backbone in proper configuration to investigate the impact of the fluorine terminal group on the stability of the side chains and membrane properties.The poly(binaphthyl-co-p-terphenyl piperidinium)AEM(QBNp TP)has the highest molecular weight and most dimensional stability due to its favorable backbone arrangement among ortho-and meta-terphenyl based AEMs.Importantly,by introducing both a fluorinated piperidinium side chain and a hexane chain into the p-terphenyl-based backbone,the prepared AEM(QBNp TP-QFC)presents an enhanced conductivity(150.6 m S cm^(-1))and a constrained swelling at 80℃.The electronic effect of fluorinated side chains is contemplated by experiments and simulations.The results demonstrate that the presence of strong electro-withdrawing fluorine groups weakens the electronic cloud of adjacent C atoms,increasing OH^(-)attack on the C atom and improving the stability of piperidinium cations.Hence QBNp TP-QFC possesses a robust alkaline stability at 80℃(95.3%conductivity retention after testing in 2 M Na OH for 2160 h).An excellent peak power density of 1.44 W cm^(-2)and a remarkable durability at 80℃(4.5%voltage loss after 100 h)can be observed.

All-fluorinated electrolyte for non-flammable batteries with ultra-high specific capacity at 4.7 V

Li metal batteries(LMBs)with LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)cathodes could release a specific energy of>500 Wh kg^(-1) by increasing the charge voltage.However,high-nickel cathodes working at high voltages accelerate degradations in bulk and at interfaces,thus significantly degrading the cycling lifespan and decreasing the specific capacity.Here,we rationally design an all-fluorinated electrolyte with addictive tri(2,2,2-trifluoroethyl)borate(TFEB),based on 3,3,3-fluoroethylmethylcarbonate(FEMC)and fluoroethylene carbonate(FEC),which enables stable cycling of high nickel cathode(LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2),NMC811)under a cut-off voltage of 4.7 V in Li metal batteries.The electrolyte not only shows the fire-extinguishing properties,but also inhibits the transition metal dissolution,the gas production,side reactions on the cathode side.Therefore,the NMC811||Li cell demonstrates excellent performance by using limited Li and high-loading cathode,delivering a specific capacity>220 mA h g^(-1),an average Coulombic efficiency>99.6%and capacity retention>99.7%over 100 cycles.

Illuminating β-arrestin conformational dynamics by fluorine NMR

In a recent paper, solution-state ^(19)F NMR spectroscopy was used to probe the conformational dynamics of β-arrestin-1, an essential adaptor and signaling component of the G-protein couple receptor (GPCR) signaling pathway. This work reveals a highly complex conformational energy landscape of β-arrestin-1, and illuminates the molecular mechanism of the membrane phosphoinositide PIP2-induced β-arrestin-1 activation at residue level.(https://doi.org/10.1038/s41467-023-43694-1).

Synthesis of a High-Efficiency Demulsifier and Study on Optimal Demulsification Conditions

Oil and water separation has always been a top priority in the oil industry.In this study,a series of hyperbranched fluorinated polyamine-amine polymers(HFPA1-5)were synthesized directly using an improved“one-pot method.”The highly active fluorinated p-trifluoromethylaniline was used as the core raw material,while diethylenetriamine and methyl acrylate were used as the chain segment.A hyperbranched fluorine-containing polyamine-amine demulsifier(NHFPA6)was obtained through nano-grafting copolymerization of HFPA5.To enhance the demulsification and dehydration performance,the copolymerized HFPA6 was modified and combined.Then,the effects of the combination ratio,demulsifier concentration,demulsification time,and demulsification temperature on the demulsification effect were investigated.The results revealed that a combination ratio of DE-401:NHFPA6=1:1,a demulsification temperature of 50℃,a demulsification time of 60 min,and a demulsifier concentration of 150 mg/L yielded a dehydration rate as high as 99.80%.A response surface optimization design of demulsification conditions was performed.The model verified that the optimal demulsification conditions were 50℃,300 mg/L,and 90 min.However,considering the economic benefits of factories,it is more favorable to select demulsification conditions with a shorter time and lower concentration when the dehydration standard is met.Therefore,the demulsification conditions were selected as 50℃,150 mg/L,and 60 min.Compared to existing demulsifiers,the demulsifier developed in this study exhibits a lower demulsification temperature and higher demulsification efficiency.

3,6-Bis-β-Dicarbonylsubstituted Carbazoles Bearing N-Spacers and Their Eu(III) Complexes as Immunofluorescent Labelling Agents

New reagents for immunofluorescence analysis of carbazole series containing fluorinated β-dicarbonyl fragments and carboxylic substituent groups separated by spacers of different lengths from the light-gathering carbazole scaffold have been developed. The markers in complex with Eu3+ ions possess stability in the aqueous phase, intense and prolonged luminescence (τ 550 - 570 μs) with characteristic emission maxima in the region of 615 nm and excitation wavelengths in the region of 380 - 390 nm, which distinguishes them from most of the analogs used. In the study of marker conjugation with streptavidin, a reagent containing 4 - 5 europium labeling complexes based on spacer-containing carbazole tetraketone was obtained. The marker-doped silicate nanoparticles exhibit intense and long-lived luminescence in the characteristic region.

A Convenient Preparation of Fluorinating Reagent F-TEDA Bearing Bisphenylsulfonylimide Counterion and Its Fluorination to Oxindoles

The direct preparation of a kind of fluorinating reagent 1[F-TEDA-N(SO_(2)Ph)_(2)]was realized in high yield via the complexation of N-fluorobenzenesulfonimide(NFSI)with 1-(chloromethyl)-1,4-diazabicyclo[2.2.2]octan-1-ium N',N'-bis-(benzenesulfonylimide)salt.In its fluorination to oxindoles,the fluorinating products 6 were afforded in moderate to high yields.

Thermal Runaway of Lithium-Ion Batteries Employing Flame-Retardant Fluorinated Electrolytes

Fluorinated electrolytes possess good antioxidant capacity that provides high compatibility to high-voltage cathode and flame retardance;thus,they are considered as a promising solution for advanced lithium-ion batteries carrying both high-energy density and high safety.Moreover,the fluorinated electrolytes are widely used to form stable electrolyte interphase,due to their chemical reactivity with lithiated graphite or lithium.However,the influence of this reactivity on the thermal safety of batteries is seldom discussed.Herein,we demonstrate that the flame-retardant fluorinated electrolytes help to reduce the flammability,while the lithium-ion batteries with flame-retardant fluorinated electrolytes still undergo thermal runaway and disclose their different thermal runaway pathway from that of battery with conventional electrolyte.The reduction in fluorinated components(e.g.,LiPF 6 and fluoroethylene carbonate(FEC))by fully lithiated graphite accounts for a significant heat release during battery thermal runaway.The 13%of total heat is sufficient to trigger the chain reactions during battery thermal runaway.This study deepens the understanding of the thermal runaway mechanism of lithium-ion batteries employing flame-retardant fluorinated electrolytes,providing guidance on the concept of electrolyte design for safer lithium-ion batteries.

The Fluorination of Boron-Doped Graphene for CF_(x) Cathode with Ultrahigh Energy Density

The enhancement of the fluorination degree of carbon fluorides(CF_(x))compounds is the most effective method to improve the energy densities of Li/CF_(x)batteries because the specific capacity of CF_(x)is proportional to the molar ratio of F to C atoms(F/C).In this study,B-doped graphene(BG)is prepared by using boric acid as the doping source and then the prepared BG is utilized as the starting material for the preparation of CF_(x).The B-doping enhances the F/C ratio of CF_(x)without hindering the electrochemical activity of the C–F bond.During the fluorination process,B-containing functional groups are removed from the graphene lattice.This facilitates the formation of a defect-rich graphene matrix,which not only enhances the F/C ratio due to abundant perfluorinated groups at the defective edges but also serves as the active site for extra Li+storage.The prepared CF_(x)exhibits the maximum specific capacity of 1204 mAh g^(−1),which is 39.2%higher than that of CF_(x)obtained directly from graphene oxide(without B-doping).An unprecedented energy density of 2974 Wh kg^(−1)is achieved for the asprepared CF_(x)samples,which is significantly higher than the theoretically calculated energy density of commercially available fluorinated graphite(2180 Wh kg^(−1)).Therefore,this study demonstrates a great potential of B-doping to realize the ultrahigh energy density of CF_(x)cathodes for practical applications.

Effects of fluorination on crystal structure and electrochemical performance of antiperovskite solid electrolytes

The development of all-solid-state lithium batteries(ASSLBs)depends on exploiting solid-state electrolytes(SSEs)with high ionic conductivity and electrochemical stability.Fluorination is generally considered to be an effective strategy to improve the ionic conductivity and electrochemical stability of inorganic SSEs.Here,we report the partial fluorination of the chlo rine sites in an antiperovskite,by which the orthorhombic Li_(2)OHCl was transformed into cubic Li_(2)OHCl_(0.9)F_(0.1),resulting in a fourfold increase in ionic conductivity at 30℃.The ab initio molecular dynamics simulations suggest that both the crystal symmetry and the anions electronegativity influence the diffusion of Li+in the antiperovskite structure.Besides,from the perspective of experiments and calculations,it is confirmed that fluorination is a feasible method to improve the electrochemical stability of antiperovskite SSEs.The LiFePO_(4)|Li cell based on Li_(2)OHCl_(0.9)F_(0.1) is also assembled and exhibits stable cycle performance,which indicates that fluorination of antiperovskite SSEs is an effective way to produce high-performance SSEs for practical application of ASSLBs.

Fluorinated soft carbon as an ultra-high energy density potassium-ion battery cathode enabled by a ternary phase K_(x)FC

Fluorinated carbons(CFx)have been widely applied as lithium primary batteries due to their ultra-high energy density.It will be a great promise if CFx can be rechargeable.In this study,we rationally tune the C-F bond strength for the alkaline intercalated CFx via importing an electronegative weaker element K instead of Li.It forms a ternary phase K_(x)FC instead of two phases(LiF+C)in lithium-ion batteries.Meanwhile,we choose a large layer distance and more defects CFx,namely fluorinated soft carbon,to accommodate K.Thus,we enable CFx rechargeable as a potassium-ion battery cathode.In detail fluorinated soft carbon CF_(1.01) presents a reversible specific capacity of 339 mA h g^(-1)(797 Wh kg^(-1))in the 2nd cycle and maintains 330 mA h g^(-1)(726 Wh kg^(-1))in the 15th cycle.This study reveals the importance of tuning chemical bond stability using different alkaline ions to endow batteries with rechargeability.This work provides good references for focusing on developing reversible electrode materials from popular primary cell configurations.

Stable cycling of LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)/lithium metal batteries enabled by synergistic tuning the surface stability of cathode/anode

Ni-rich layered oxides(LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2))show great potential in long-range and low-cost lithiumion batteries.However,due to the high surface sensitivity,their practical application is hindered by interfacial instability with electrolytes under high voltage for long cyclic life.Herein,by combining both firstprinciple calculations and time-of-flight secondary ion mass spectrometry(TOF-SIMS),a novel surface fluorinated reconstruction(SFR)mechanism is proposed to improve the interfacial stability under high voltage,which could effectively regulate the surface fluoride species to desensitize the LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)interface.We demonstrate here that by tuning the ratio of fluoride species,the LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)/Li battery could achieve excellent long-term and high voltage performance(163.5 mA h g^(-1)at 0.5 C for 300 cycles under 4.4 V),while the controlled sample decayed to 125.4 mA h g^(-1)after 300 cycles.Moreover,the favorable cross-talk effect induced by SFR further facilitates the incorporation of suitable amounts of Ni ions into the construction of stable solid electrolyte interface(SEI)layer for anode surface.Therefore,the ultra-long cycling stability under high voltage can be achieved by the robust cathode/electrolyte and Li/electrolyte interfaces,which results in excellent interfacial stability after long cycling.This work provides new insights into the surface design of cathode materials and improves the stability of the electrode-electrode interface under high voltage.

Reversible cationic-anionic redox in disordered rocksalt cathodes enabled by fluorination-induced integrated structure design

Cation-disordered rocksalt oxides(DRX)have been identified as promising cathode materials for high energy density applications owing to their variable elemental composition and cationic-anionic redox activity.However,their practical implementation has been impeded by unwanted phenomena such as irrepressible transition metal migration/dissolution and O_(2)/CO_(2)evolution,which arise due to parasitic reactions and densification-degradation mechanisms during extended cycling.To address these issues,a micron-sized DRX cathode Li_(1.2)Ni_(1/3)Ti_(1/3)W_(2/15)O_(1.85)F_(0.15)(SLNTWOF)with F substitution and ultrathin LiF coating layer is developed by alcohols assisted sol-gel method.Within this fluorination-induced integrated structure design(FISD)strategy,in-situ F substitution modifies the activity/reversibility of the cationic-anionic redox reaction,while the ultrathin LiF coating and single-crystal structure synergistically mitigate the cathode/electrolyte parasitic reaction and densification-degradation mechanism.Attributed to the multiple modifications and size effect in the FISD strategy,the SLNTWOF sample exhibits reversible cationic-anionic redox chemistry with a meliorated reversible capacity of 290.3 mA h g^(-1)at 0.05C(1C=200 mA g^(-1)),improved cycling stability of 78.5%capacity retention after 50 cycles at 0.5 C,and modified rate capability of 102.8 mA h g^(-1)at 2 C.This work reveals that the synergistic effects between bulk structure modification,surface regulation,and engineering particle size can effectively modulate the distribution and evolution of cationic-anionic redox activities in DRX cathodes.

Gas‐phase fluorination of conjugated microporous polymer microspheres for effective interfacial stabilization in lithium metal anodes

Lithium(Li)metal anodes have attracted extensive attention due to their ultrahigh theoretical capacity and low potential.However,the uneven deposition of Li near the unstable electrode/electrolyte interfaces leads to the growth of Li dendrites and the degradation of active electrodes.Herein,we directly fluorinate alkyne-containing conjugated microporous polymers(ACMPs)microspheres with fluorine gas(F_(2))to introduce a novel fluorinated interlayer as an interfacial stabilizer in lithium metal batteries.Using density functional theory methods,it is found that as-prepared fluorinated ACMP(FACMP)has abundant partially ionic C–F bonds.The C–F bonds with electrochemical lability yield remarkable lithiophilicity during cycling.The in situ reactions between the active C–F bonds and Li ions enable transfer of lithium fluoride microcrystals to the solid electrolyte interphase(SEI)layers,guaranteeing effective ionic distribution and smooth Li deposition.Consequently,Li metal electrodes with the fluorinated interlayers demonstrate excellent cycling performances in both half-batteries and full cells with a lithium bis(trifluoromethanesulfonyl)imide electrolyte as well as a nonfluorinated lithium bis(oxalate)borate electrolyte system.This strategy is highly significant in customizable SEI layers to stabilize electrode interfaces and ensure high utilization of Li metal anodes,especially in a nonfluorinated electrolyte.

Chemical surface tuning of zinc metal anode toward stable,dendrite-less aqueous zinc-ion batteries

The commercialization of Zn batteries is confronted with urgent challenges in the metal anode,such as dendrite formation,capacity loss,and cracking or dissolution.Here,surface interfacial engineering of the Zn anode is introduced for achieving safety and dendritic-free cycling for high-performance aqueous Zn batteries through a simple but highly effective chemical etching-substitution method.The chemical modification induces a rough peak-valley surface with a thin fluorine-rich interfacial layer on the Zn anode surface,which regulates the growth orientation via guiding uniform Zn plating/stripping,significantly enhances accessibility to aqueous electrolytes and improves wettability by reducing surface energy.As a result,such a synergetic surface effect enables uniform Zn plating/stripping with low polarization of 29 m V at a current density of 0.5 m A cm^(-2) with stable cyclic performance up to 1000 h.Further,a full cell composed of a fluorine-substituted Zn anode coupled with aβ-MnO_(2)or Ba-V_(6)O_(13)cathode demonstrates improved capacity retention to 1000 cycles compared to the pristine-Zn cells.The proposed valley deposition model provides the practical direction of surface-modified interfacial chemistries for improving the electrochemical properties of multivalent metal anodes via surface tuning.