Impact of Initial Soil Conditions on Soil Hydrothermal and Surface Energy Fluxes in the Permafrost Region of the Tibetan Plateau

Accurate initial soil conditions play a crucial role in simulating soil hydrothermal and surface energy fluxes in land surface process modeling.This study emphasized the influence of the initial soil temperature(ST)and soil moisture(SM)conditions on a land surface energy and water simulation in the permafrost region in the Tibetan Plateau(TP)using the Community Land Model version 5.0(CLM5.0).The results indicate that the default initial schemes for ST and SM in CLM5.0 were simplistic,and inaccurately represented the soil characteristics of permafrost in the TP which led to underestimating ST during the freezing period while overestimating ST and underestimating SLW during the thawing period at the XDT site.Applying the long-term spin-up method to obtain initial soil conditions has only led to limited improvement in simulating soil hydrothermal and surface energy fluxes.The modified initial soil schemes proposed in this study comprehensively incorporate the characteristics of permafrost,which coexists with soil liquid water(SLW),and soil ice(SI)when the ST is below freezing temperature,effectively enhancing the accuracy of the simulated soil hydrothermal and surface energy fluxes.Consequently,the modified initial soil schemes greatly improved upon the results achieved through the long-term spin-up method.Three modified initial soil schemes experiments resulted in a 64%,88%,and 77%reduction in the average mean bias error(MBE)of ST,and a 13%,21%,and 19%reduction in the average root-mean-square error(RMSE)of SLW compared to the default simulation results.Also,the average MBE of net radiation was reduced by 7%,22%,and 21%.

A comparative study of the land-atmosphere energy and water exchanges over the Tibetan Plateau and the Yangtze River Region

正确认识不同区域能量和水分循环特征是研究局地地气相互作用及准确预测区域天气,气候变化的关键.为了研究属于干旱/半干旱气候的青藏高原(TP)和湿润/半湿润气候的长江流域(YRR)之间地表能量和水分交换的异同,本文对比分析了两个区域8个不同地表类型(包括高山荒漠,高山草地,(平原)城市和(平原)草地等)观测站点的地表辐射和能量通量数据.结果显示:(1)TP由于高原大气层稀薄且空气洁净,年平均入射短波辐射为251.3W m^(-2),是YRR的1.7倍.加之高原地表反照率高导致反射辐射(59.6 W m^(-2))是YRR的2.87倍.入射及出射的长波辐射为231.5和338.0 W m^(-2),分别为YRR的0.64和0.83.而两个区域的净辐射差异不大;(2)草地站更多的潜热释放使得地表总加热效率高于城市和高山荒漠,TP和YRR的草地站的年平均潜热分别为35.0和38.8 W m^(-2),而植被稀疏且土壤干燥的高山荒漠地区感热最大,年平均感热为42.1 W m^(-2);其次是城市下垫面,其年平均感热为37.7 W m^(-2).研究结果揭示了不同气候背景下典型下垫面地气相互作用特征,为地气相互作用过程深入分析奠定了基础.

Photosynthetic and water-related physiological characteristics of Periploca sepium in response to changing soil water conditions in a shell sand habitat

This study was performed to observe the effects of water on photosynthesis and water-related physiology in dominant shrubs in shell sand habitats.Four-year-old Periploca sepium seedlings were used as model species.A gradient of 12 water levels was established by artificially supplying the shell sand with water up to saturation and then allowing natural evapotranspiration to occur.The photo synthetic,chlorophyll fluorescence and stem sap flow parameters of P.sepium were measured under a range of water conditions.The different soil water conditions were classified according to the responses of these parameters.(1)With the increase in the relative water content(RWC)of the shell sand,the parameters of leaf photosynthesis,chlorophyll fluorescence and water-related physiology in P.sepium showed significant critical responses.The net photo synthetic rate(Pn),transpiration rate(Tr),instantaneous water use efficiency(WUE),potential water use efficiency(WUEi),maximum photochemical efficiency(Fv/Fm),actual photochemical efficiency(ΦPSII)and daily accumulation of stem sap flow all increased first and then decreased with increasing RWC,but the corresponding water conditions associated with their maximum values were not the same.An RWC of 69.40%was determined to be the optimal water condition for photosynthesis and water-related physiological activity in P.sepium.At an RWC of 36.61%,the mechanism of photosynthetic inhibition in P.sepium changed from stomatal limitation to nonstomatal limitation;this was also the minimum water requirement for maintaining normal photo synthetic processes.An RWC of 50.27%resulted in the highest WUE in P.sepium,indicating that moderate drought stress increased WUE.(2)Based on the quantitative relationship between the photo synthetic parameters of P.sepium and the shell sand water gradient,the soil water availability was classified into 6 water grades.The RWC range for maintaining strong photosynthesis and high WUE in P.sepium was 63.22-69.98%.(3)Gas exchange in P.sepium was inhibited under drought and waterlogging stresses.Under these conditions,the photosynthetic electron transport chain was blocked,and the dissipation of light energy as heat increased,which ultimately led to a decline in photo synthetic productivity;moreover,transpiration and dissipation were aggravated,and water transmission and utilization processes in P.sepium were hindered.A significant negative feedback regulation mechanism in the photosynthetic and water-related physiological processes of P.sepium was observed;this mechanism allowed P.sepium growing in shell sand to be highly adaptable to water stress.

Contribution of groundwater to the formation of sand dunes in the Badain Jaran Desert, China

The tallest sand dune worldwide is located in the Badain Jaran Desert(BJD),China,and has been standing for thousands of years.Previous studies have conducted limited physical exploration and excavation on the formation of sand dunes and have proposed three viewpoints,that is,bedrock control,wind dominance,and groundwater maintenance with no unified conclusion.Therefore,this study analyzed the underlying bedding structure of sand dunes in the BJD.Although the bedrock of sand dunes is uplifted and wind controls the shape of dunes,the main cause of dune formation is groundwater that maintains the deposition of calcareous sandstone and accumulation of aeolian sand.According to water transport model and vapor transports in the unsaturated zone of sand dunes,capillary water transport height is limited with film water constituting the main form of water in dunes.Chemical properties and temperature of groundwater showed that aquifers in different basins receive relatively independent recharge from deep sources in the crater.Result of dune formation mechanism is of considerable importance in understanding groundwater circulation and provides a new perspective on water management in arid desert areas.

Effect of sand-fixing vegetation on the hydrological regulation function of sand dunes and its practical significance

Soil water content is a key controlling factor for vegetation restoration in sand dunes.The deep seepage and lateral migration of water in dunes affect the recharge process of deep soil water and groundwater in sand dune ecosystems.To determine the influence of vegetation on the hydrological regulation function of sand dunes,we examined the deep seepage and lateral migration of dune water with different vegetation coverages during the growing season in the Horqin Sandy Land,China.The results showed that the deep seepage and lateral migration of water decreased with the increase in vegetation coverage on the dunes.The accumulated deep seepage water of mobile dunes(vegetation coverage<5%)and dunes with vegetation coverage of 18.03%,27.12%,and 50.65%accounted for 56.53%,51.82%,18.98%,and 0.26%,respectively,of the rainfall in the same period.The accumulated lateral migration of water in these dunes accounted for 12.39%,6.33%,2.23%,and 7.61%of the rainfall in the same period.The direction and position of the dune slope affected the soil water deep seepage and lateral migration process.The amounts of deep seepage and lateral migration of water on the windward slope were lower than those on the leeward slope.The amounts of deep seepage and lateral migration of water showed a decreasing trend from the bottom to the middle and to the top of the dune slope.According to the above results,during the construction of sand-control projects in sandy regions,we suggest that a certain area of mobile dunes(>13.75%)should be retained as a water resource reservoir to maintain the water balance of artificial fixed dune ecosystems.These findings provide reliable evidence for the accurate assessment of water resources within the sand dune ecosystem and guide the construction of desertification control projects.

Electrical resistivity change of saturated sand during reliquefaction under hammering loading

The electrical resistivity method was verified as an optional technique to monitor the change of mesostructure of saturated soils.To investigate the change laws of resistivity and analyze the reliquefaction meso-mechanism during the consecutive liquefaction process,five successive impact liquefaction tests were performed in a one-dimensional cubical chamber.The resistivity variation and excess pore water pressure(EPWP)were measured.The results indicate that the excess pore water pressure experienced four stages:quick increase stage,slow dissipation stage,rapid dissipation stage,and stability stage.Meanwhile,a swift decrease of resistivity emerged before the start of the rapid dissipation stage of EPWP,and then an increasing trend of resistivity is demonstrated with the densification of soil.It is proved that the vertical pore connectivity of liquefied sand is better than its random deposit state,based on a comparative study of porosity calculated from the settlement and resistivity of sand after each test.

Sand Production Prediction and Safe Differential Pressure Determination in a Deepwater Gas Field

Sand production is a critical issue during the development of offshore oil and gas fields.Certain gas fields(e.g.the AB gas field)have high porosity and high permeability,and with water at the bottom of the reservoir,the risk of sand production greatly increases at high differential pressures.Based on reservoir properties,geological conditions,production requirements,and well logging data,in this study an ultrasonic time difference method,a B index method,and a S index method are used together with a model of rock mass failure(accounting for water influx and pressure depletion)to qualitatively predict sand production.The results show that considered sample gas field has an overall high risk of sand production.The critical differential pressure(CDP)without water influx is in the range of 1.40 to 2.35 MPa,the CDP after water influx is from 0.60 to 1.41MPa.The CDP under pressure depletion is in the range of 1.20 to 1.92 MPa.The differential pressure charts of sand production are plotted,and the safe differential pressure windows with or without water influx are obtained.The model calculation results and the experimental results are consistent with the field production data,which indicates that the implemented prediction method could be taken as a reference for sand production prediction in similar deep water gas fields.

Tracing surface seawater mixing and nutrient transport by^(222)Rn on the northern coast of Beibu Gulf,China

The transport and diffusion of substances in seawater are limited by the mixing motion of water bodies,while the main forms of mixing in offshore water bodies are advection and eddy diffusion.The eddy diffusion process of water indicates the possible transport direction of dissolved substances.However,the complex environment in the coastal zone makes it difficult to quantitatively assess the water diffusion process.^(222)Rn is a useful tool to trace the diffusion process of water bodies.However,studies on the^(222)Rn distribution and its behavior in the Beibu Gulf are scarce.In this study,the activity distribution characteristics of^(222)Rn in surface seawater of the Guangxi shelf area of the Beibu Gulf were measured.Based on the one-dimensional,steady-state model,the vorticity diffusion coefficient of^(222)Rn in the horizontal direction was calculated as(0.42−2.13)×10^(8) m^(2)/d,and the offshore fluxes of^(222)Rn under the influence of water mixing were calculated as 2.00×10^(12) Bq/d.Correspondingly,the horizontal transport fluxes of silicate,phosphate,nitrite and nitrate were 6.28×10^(−3)mol/(m^(2)·d),0.10×10^(−3)mol/(m^(2)·d),0.20×10^(−3)mol/(m^(2)·d)and 4.15×10^(−3)mol/(m^(2)·d),respectively.These results indicate that the study of eddy current diffusion in offshore marine water facilitates a deeper understanding of the water mixing process and nutrient transport and migration.

Significance of Nanoparticles Aggregation with Cattaneo-Christov Heat Flux on the Water and Ethylene Glycol Mixture Based MWCNTs-Nanofluid Flow over a Stretching Cylinder

This work aims to analyze the flow of electrically conducting MWCNTs-nanofluid over a stretching cylinder with the aggregation and non-aggregation effects of nanoparticles. The working fluid comprised a combination of water and ethylene glycol, with volumetric proportions of (50:50) considered. Convective boundary constraints and modified Fourier law are implemented in heat transmission assessment. The mathematical flow model is formulated in the form of PDEs and is transformed into ODEs via similarity transformation. Numerical outcomes will be obtained with the use of the bvp4c technique and will be displayed with the help of graphs and tables. The results show that the surface drag coefficient is enhanced in the case of aggregation of nanoparticles whereas heat transfer rate is enhanced in the non-aggregation effect of nanoparticles. Furthermore, the temperature distribution enhances the increasing values of particle volume fraction in the case of aggregation effects of nanoparticles whereas temperature distribution lowers in the case of non-aggregation effect of nanoparticles. .

Three-year Variations of Water, Energy and CO_2 Fluxes of Cropland and Degraded Grassland Surfaces in a Semi-arid Area of Northeastern China

Based on 3 years （2003-05） of the eddy covariance （EC） observations on degraded grassland and cropland surfaces in a semi-arid area of Tongyu （44°25′N, 122°52′E, 184 m a.s.1.）, Northeast China, seasonal and annual variations of water, energy and CO2 fluxes have been investigated. The soil moisture in the thin soil layer （at 0.05, 0.10 and 0.20 m） clearly indicates the pronounced annual wet-dry cycle; the annual cycle is divided into the wet （growing season） and dry seasons （non-growing season）. During the growing season （from May to September）, the sensible and latent heat fluxes showed a linear dependence on the global solar radiation. However, in the non-growing season, the latent heat flux was always less than 50 W m^-2, while the available energy was dissipated as sensible, rather than latent heat flux. During the growing season in 2003-05, the daily average sensible and latent heat fluxes were larger on the cropland surface than on the degraded grassland surface. The cropland ecosystem absorbed more CO2 than the degraded grassland ecosystem in the growing season in 2003-05. The total evapotranspiration on the cropland was more than the total precipitation, while the total evapotranspiration on the degraded grassland was almost the same as the total annual precipitation in the growing season. The soil moisture had a good correlation with the rainfall in the growing season. Precipitation in the growing season is an important factor on the water and carbon budget in the semi-arid area.

New evidence for the links between the local water cycle and the underground wet sand layer of a mega-dune in the Badain Jaran Desert, China

Scientists and the local government have great concerns about the climate change and water resources in the Badain Jaran Desert of western China. A field study for the local water cycle of a lake-desert system was conducted near the Noertu Lake in the Badain Jaran Desert from 21 June to 26 August 2008. An underground wet sand layer was observed at a depth of 20–50 cm through analysis of datasets collected during the field experiment. Measurements unveiled that the near surface air humidity increased in the nighttime. The sensible and latent heat fluxes were equivalent at a site about 50 m away from the Noertu Lake during the daytime, with mean values of 134.4 and 105.9 W/m2 respectively. The sensible heat flux was dominant at a site about 500 m away from the Noertu Lake, with a mean of 187.7 W/m2, and a mean latent heat flux of only 26.7 W/m2. There were no apparent differences for the land surface energy budget at the two sites during the night time. The latent heat flux was always negative with a mean value of –12.7 W/m2, and the sensible heat flux was either positive or negative with a mean value of 5.10 W/m2. A portion of the local precipitation was evaporated into the air and the top-layer of sand dried quickly after every rainfall event, while another portion seeped deep and was trapped by the underground wet sand layer, and supplied water for surface psammophyte growth. With an increase of air humidity and the occurrence of negative latent heat flux or water vapor condensation around the Noertu Lake during the nighttime, we postulated that the vapor was transported and condensed at the lakeward sand surface, and provided supplemental underground sand pore water. There were links between the local water cycle, underground wet sand layer, psammophyte growth and landscape evolution of the mega-dunes surrounding the lakes in the Badain Jaran Desert of western China.

Monitoring and simulation of water,heat,and CO_2 fluxes in terrestrial ecosystems based on the APEIS-FLUX system

The Integrated Environmental Monitoring (IEM) project, part of the Asia-Pacific Environmental Innovation Strategy (APEIS) project, developed an integrated environmental monitoring system that can be used to detect, monitor, and assess environmental disasters, degradation, and their impacts in the Asia-Pacific region. The system primarily employs data from the moderate resolution imaging spectrometer (MODIS) sensor on the Earth Observation System-(EOS-) Terra/Aqua satellite, as well as those from ground observations at five sites in different ecological systems in China. From the preliminary data analysis on both annual and daily variations of water, heat and CO2 fluxes, we can confirm that this system basically has been working well. The results show that both latent flux and CO2 flux are much greater in the crop field than those in the grassland and the saline desert, whereas the sensible heat flux shows the opposite trend. Different data products from MODIS have very different correspondence, e.g. MODIS-derived land surface temperature has a close correlation with measured ones, but LAI and NPP are quite different from ground measurements, which suggests that the algorithms used to process MODIS data need to be revised by using the local dataset. We are now using the APEIS-FLUX data to develop an integrated model, which can simulate the regional water, heat, and carbon fluxes. Finally, we are expected to use this model to develop more precise high-order MODIS products in Asia-Pacific region.

Treatment of mine water high in Fe and Mn by modified manganese sand

The iron and manganese absorption properties of several filter media were studied. Four plain filter media and six surface-modified media were examined. The surface modification was performed using potassium permanganate as a surface treatment. The surface-modified manganese sand was found to be most efficient at removing iron and manganese from water. The metal concentrations in filtered effluent were between 0.01 and 0.04 mg/L, which is far lower than the standard for recycle water. A concen-tration of 5% KMnO4 was found to be most effective as surface modifier. The surface of the manganese sand modified by 5% KMnO4 was examined and found to be covered with a dense membrane of some compound. The membrane had the advantages of uniform texture, large surface area and physical and chemical stability. It was effective at removing iron and manganese from mine water.

Distribution and fluxes of suspended sediments in the offshore waters of the Changjiang (Yangtze) Estuary

The offshore waters of the Changjiang Estuary are the transitional areas where river-supplied water and sediment are transported to the sea, and material exchanges occur with the neighbored Hangzhou Bay and the Jiangsu waters. Field observations of currents and sediment properties were conducted to study temporal and spatial distributions of suspended sediments under various dynamical conditions. The high sediment concentrations were found to occur in the western and southern waters of the offshore, and the low concentrations occurred in the eastern and northern waters. This pattern of the suspended sediment concentration （SSC） distribution is obviously influ- enced by the runoff and tidal current. The significant difference of along-estuary SSC distribution indicates that the SSC is reduced gradually from the west to the east, and that in the spring tide is obviously higher than in the neap tide. The methods of mechanism analysis and equal-area grids were used to calculate the suspended sediment fluxes at the typical cross sections. It was found that 44 percent of total suspended sediments from the Changjiang River were deposited in the submarine delta, and more than 27 percent of sediments were transported southernly into the Hangzhou Bay, and only 9 percent of sediments was supplied and exchanged with the northern Jiangsu waters, and about 20 percent of sediments was delivered offshore to the sea.

Experimental study on the flow behaviour of water-sand mixtures in fractured rock specimens

The study of flow behaviour of water-sand mixtures in fractured rocks is of great necessity to understand the producing mechanism and prevention of water inrush and sand gushing accidents.A self-developed seepage test system is used in this paper to conduct laboratory experiments in order to study the influence of the particle size distribution,the void ratio,and the initial mass of Aeolian sand on the flow behavior.It is concluded that the water flow velocity is insensitive to the initial mass of the Aeolian sand but increases with the power exponent in the Talbot formula and the specimen height.The outflow of the Aeolian sand increases with the power exponent in the Talbot formula,the specimen height,and the initial mass of the Aeolian sand.Besides,the outflow of the Aeolian sand changes exponentially with the water flow velocity.Finally,it is found that the fractured specimen has a maximum sand filtration capacity beyond which the outflow of the Aeolian sand significantly increases with the initial mass of the Aeolian sand.

Effect of slope gradient on the subsurface water flow velocity of sand layer profile

Subsurface water flow velocity influences the hydrodynamic characteristics of soil seepage and the interaction between subsurface water flow and surface runoff during soil erosion and sediment transport.A visualized method and equipment was adopted in this study to observe the subsurface water flow.Quartz sand was used as the test material of subsurface water flow and fluorescent dye was used as the indicator for tracing subsurface water flow.Water was supplied at the same flow discharge to the three parts at the bottom of the test flume,and the subsurface water flow were determined with four slope gradients(4°,8°,10°,and 12°).The results showed that the seepage velocity gradually increased with increasing slope gradient.The pore water velocity at different depths of sand layer profile increased with increasing slope gradient,whereas the thickness of the flow front gradually decreased.For the same slope gradient,the pore water velocity in the lower layer was the largest,whereas the thickness of the flow front was the smallest.Comparative analysis of the relationship between seepage velocity and pore water velocity at different depths of sand layer profile showed that the maximum relative difference between the measured pore water velocity and the computational pore water velocity at different depths of sand profile in the experiment was 4.38%.Thus,the test method for measuring the subsurface water flow velocity of sand layer profile adopted in this study was effective and feasible.The development of this experiment and the exploration of research methods would lay a good test foundation for future studies on the variation law of subsurface water flow velocity and the determination of flow velocity in purple soils,thus contributing to the improvement of the hydrodynamic mechanism of purple soils.

Variation of fluxes of water vapor, sensible heat and carbon dioxide above winter wheat and maize canopies

Surface energy fluxes were measured using Bowen-Ratio Energy Balance technique (BREB) and eddy correlation system at Luancheng of Hebei Province, on the North China Plain from 1999 to 2001. Average diurnal variation of surface energy fluxes and CO2 flux for maize showed the inverse “U” type. The average peak fluxes did not appear at noon, but after noon. The average peak CO2 flux was about 1.65 mg m-2 s-1. Crop water use efficiency (WUE) increased quickly in the morning, stabilized after 10:00 and decreased quickly after 15:00 with no evident peak value. The ratio of latent heat flux (λE) to net solar radiation (Rn) was always higher than 70% during winter wheat and maize seasons. The seasonal average ratio of sensible heat flux (H) divided byR n stayed at about 15% above the field surface; the seasonal average ratio of conductive heat flux (G) divided by Rn varied between 5% and 13%, and the averageG/R> n from the wheat canopy was evidently higher than that from the maize canopy. The evaporative fraction (EF) is correlated to the Bowen ratio in a reverse function.EF for winter wheat increased quickly during that revival stage, after the stage, it gradually stabilized to 1.0, and fluctuated around 1.0. EF for maize also fluctuated around 1.0 before the later grain filling stage, and decreased after that stage.

Design and Operation of the Printing and Dyeing Wastewater Treatment Project by Combination of Coagulation Sedimentation - Hydrolytic Acidification with Aeration Tank - Biological Aerated Filter - Active Sand Filter

In order to protect quality of Baiyangdian surface water and Gaoyang groundwater,the project is applied to process printing and dyeing wastewater that contains complicated compositions,high concentrations of organics and SS,and lots of pollutants difficult to degrade by microorganism. The process and operating parameters of project are optimized and debugged,and its economic and environmental benefits are analyzed.The results show that the process of coagulation sedimentation-hydrolytic acidification with aeration tank-biological aerated filter-active sand filter is applied in Gaoyang Sewage Treatment Plant. The design scale of sewage treatment plant is 120000 m^3/d. The influent is as following: COD is 669mg/L; SS is 424mg/L; NH_3-N is 8.83mg/L; TP is 6.03mg/L. After the process,the best removal rates of COD,SS,NH_3-N and TP are 93. 5%,98. 8%,97. 1% and 96. 2%,respectively. The various indexes of effluent water complied with standard A of the first order in Pollutants Emission Standard of Urban Wastewater Treatment Plant( GB 18918-2002). The processing cost is only 0. 807 yuan/m^3. As a result,the project construction and operation not only improve the environment,but also promote regional economic development. Process design and operating parameters provide an important reference value for the printing and dyeing wastewater treatment industry.

Recycling water glass from wet reclamation sewage of waste sodium silicate-bonded sand

Wet reclamation of waste sodium silicate-bonded sand produces much alkaline sewage and causes pollution. Recycling water glass from wet reclamation sewage of the waste sodium silicate-bonded sand can solve pollution issues and generate economic benefits. In this work, the wet reclamation sewage was filtered, and the filtrate was causticized with a quicklime powder to produce a lye. The effects of causticization temperature, causticization time, and the amount of quicklime powder on the causticization rate were studied. The lye was used to dissolve the silica in the filtration residue to prepare a sodium silicate solution. The effects of the mass of filtration residue, dissolution temperature, and dissolution time on sodium silicate modulus were studied. Finally, the recycled water glass was obtained by concentrating the sodium silicate solution, and the bonding strength of the recycled water glass was tested. The results showed that the causticization rate could be improved by increasing the amount of quicklime powder, causticization temperature, and causticization time, and the highest causticization rate was above 92%. Amorphous silica in the filtration residue dissolved in the lye. Increasing the amount of the filtration residue, dissolution temperature, and dissolution time could improve the sodium silicate modulus. The bonding strength of the recycled water glass was close to that of commercial water glass. The recycled water glass could be used as a substitute for the commercial water glass.

Mechanical Properties of Sea Water Sea Sand Coral Concrete Modified with Different Cement and Fiber Types

The mechanical properties of modified sea water sea sand coral concrete(SWSSCC)under axial compression were experimentally studied.Two different parameters were considered in this test:types of cement and fiber.An experimental campaign was developed involving uniaxial compression tests and the use of digital image correlation(DIC)method to analyze the strain distribution and crack propagation of specimen.Test results indicated that the compressive strength and elastic modulus of SWSSCC were improved by adding stainless steel fibers(SSF),while polypropylene fibers(PF)enhanced the SWSSCC peak deformation.It was found that the elastic modulus and strength of SWSSCC using ordinary Portland cement(OPC)were higher compared to specimen with low alkalinity sulphoaluminate cement(LAS).Typical strain distribution changed with the variation of fiber types.The propagation and characteristics of cracks in SWSSCC containing PF were similar to those of cracks in SWSSCC.However,the propagation of cracks and the development of plastic deformation in SWSSCC were effectively hindered by adopting SSF.Finally,an analytical stress-strain expression of specimen considering the influences of fibers was established.The obtained results would provide a basis for the application of SWSSCC.