Eddy Current Test for Detection of Foreign Material using Rotating Probe

There are several elements that affect on the integrity of steam generator tubes. One of the elements is loose parts located on outside of the tubes. It causes erosion which is possible to lead fatal defect like crack on the outside surface of the tubes. In this study, artificial loose parts on Inconel 690 tube are demonstrated and eddy current testing data of the region is acquired using rotating probe. Ferromagnetic and nonmagnetic foreign materials were used to demonstrate artificial loose parts. Eddy current channel of 100 KHz frequency shows definite signals of those foreign materials but stainless steel was not clearly detected. This result can be explained based on the electrical conductivity of the materials and it can be confirmed with lissajous window and C-scan. In addition, no indication was detected when the distance of the gap between the foreign materials and the tube is increased to more than 3 mm under this test condition. Based on these experimental inspections, we were able to find suitable methods for analyzing the signals obtained under various conditions that could occur when conducting steam generator eddy current test in NPP.

THE STATE COUNCIL DECIDES TO EXTEND THEIMPORT-DUTY EXEMPTION PERIOD FOR IMPORTS OF EQUIPMENT AND RAW MATERIALS BY ENTERPRISES WITH FOREIGN INVESTMENT

Recently the State Council decided to extend the period ofduty exemption for imports of equipment and raw materials by foreign-invested enterprises below US$30 million.In order to administrate import and export activities in light ofinternational practice and apply a unified, fair and standardizedpolicy toward import duties, the State Council, on December28,1995, decided to reform and adjust the policies of import duties by fairly significant reduction of the overall import tariff leveland elimination of preferences of import-duty exemption for mostimport items, which was also applicable to imports of equipmentand raw materials by foreign-invested enterprises set up since April1st, 1996. At the same time, with a view to maintaining the policycontinuity and relative stability, those enterprises established before March 31, 1996 were allowed an extended duty-exemptionperiod of one to two years for importation of equipment and rawmaterials(referring to construction materials, etc.) if such importswere below the value of their total investments, and for

Bilateral Gluteal Reconstruction with Double Flap Secondary to Biopolymers Injection

The injection of adjuvant substances for aesthetic purposes is a public health problem, for 40 years this problem has been described throughout our continent, the vast majority of women patients are affected by the infiltration of silicon, mineral oils, automotive oil, methyl methacrylate, cement and various oily substances. This is a 54-year-old female patient who for about 30 years for cosmetic purposes was injected with mineral oil (quantity unknown) in both glutei with the aim of buttock augmentation. Physical examination was observed an important deformity in each buttock, hyperkeratosis with discoloration in both buttocks, loss of bilateral projection, right buttock with a secondary tumor of 22 cm × 11 cm and left 22 cm × 10 cm, stony appearance, local hyperthermia, painful on manipulation, with diffuse nodular lesions measuring 2 cm × 2 cm, without evidence of loss of continuity that would condition secretion leakage. Surgical planning is based on the very important size of the initial defect that we would have to reconstruct, so that the rotation of two wide-based flaps could guarantee better survival and occlusion of the defect, since the realization of a graft would cause a significant deformity, and the realization of a microsurgical flap in a fibrous tissue would inevitably result in its necrosis. The pathophysiology of the adjuvant disease is extremely complex, therefore it must be addressed by a multidisciplinary group with extensive experience.

Design and Development of Innovative Highland Water Filtration System

The righteous book of Al-Quran mentions that the basic need of the living thing in this world is water. Resident of rural areas such as indigenous people will tap the highland aquatic resources as the main foundation for water. The reservoir is built on the top of hilly area to collect water before it discharges through a pipe system that uses the force of gravity to go down to the settlements. However, the filtration system frequently clogs and requires the occupants to climb up the reservoir hill for cleaning process. A lot of energy and time are required to manage the irrigation systems. Thus, an innovation system has been conducted as the filters will be cleaned automatically using solar energy supply. The designs of the filters are specially designed as the filter is equipped with electric motors, washer rods, power supply units, and automatic control box. The advantages of this project are the product will filtered the water as remain as natural highland watering resources while using the solar energy to accomplished green technology application.

USING AUTHENTIC LISTENING MATERIALS IN FOREIGN LANGUAGE CLASSROOMS

This paper argues for the need for authentic listening materials in the ELT classroom in China,discussing the selection of those materials,and their adaptation for classroom use,whilst outlinig theirconstraints.