Using fracture-based continuum modeling of coupled geomechanical-hydrological processes for numerical simulation of hydraulic fracturing

This paper describes numerical simulation of hydraulic fracturing using fracture-based continuum modeling(FBCM)of coupled geomechanical-hydrological processes to evaluate a technique for high-density fracturing and fracture caging.The simulations are innovative because of modeling discrete fractures explicitly in continuum analysis.A key advantage of FBCM is that fracture initiation and propagation are modeled explicitly without changing the domain grid(i.e.no re-meshing).Further,multiple realizations of a preexisting fracture distribution can be analyzed using the same domain grid.The simulated hydraulic fracturing technique consists of pressurizing multiple wells simultaneously:initially without permeating fluids into the rock,to seed fractures uniformly and at high density in the wall rock of the wells;followed by fluid injection to propagate the seeded fracture density hydraulically.FBCM combines the ease of continuum modeling with the potential accuracy of modeling discrete fractures and fracturing explicitly.Fractures are modeled as piecewise planar based on intersections with domain elements;fracture geometry stored as continuum properties is used to calculate parameters needed to model individual fractures;and rock behavior is modeled through tensorial aggregation of the behavior of discrete fractures and unfractured rock.Simulations are presented for previously unfractured rock and for rock with preexisting fractures of horizontal,shallow-dipping,steeply dipping,or vertical orientation.Simulations of a single-well model are used to determine the pattern and spacing for a multiple-well design.The results illustrate high-density fracturing and fracture caging through simultaneous fluid injection in multiple wells:for previously unfractured rock or rock with preexisting shallow-dipping or horizontal fractures,and in situ vertical compressive stress greater than horizontal.If preexisting fractures are steeply dipping or vertical,and considering the same in situ stress condition,well pressurization without fluid permeation appears to be the only practical way to induce new fractures and contain fracturing within the target domain.

A modified 3D mean strain energy density criterion for predicting shale mixed-mode Ⅰ/Ⅲ fracture toughness

The fracture toughness of rocks is a critical fracturing parameter in geo-energy exploitation playing a significant role in fracture mechanics and hydraulic fracturing.The edge-notched disk bending(ENDB)specimens are employed to measure the entire range of mixed-modeⅠ/Ⅲfracture toughness of Longmaxi shale.To theoretically interpret the fracture mechanisms,this research first introduces the detailed derivations of three established fracture criteria.By distinguishing the volumetric and distortional strain energy densities,an improved three-dimensional mean strain energy density(MSED)criterion is proposed.As the critical volumetric to distortional MSED ratio decreases,the transition from tensiondominated fracture to shear-dominated fracture is observed.Our results indicate that both peak load and applied energy increase significantly with the transition from pure mode I(i.e.,tension)to pure modeⅢ(i.e.,torsion or tearing)since mode-Ⅲcracking happens in a twisted manner and mode-Ⅰcracking occurs in a coplanar manner.The macroscopic fracture signatures are consistent with those of triaxial hydraulic fracturing.The average ratio of pure mode-Ⅲfracture toughness to pure mode-Ⅰfracture toughness is 0.68,indicating that the obtained mode-Ⅲfracture resistance for a tensionbased loading system is apparent rather than true.Compared to the three mainstream fracture criteria,the present fracture criterion exhibits greater competitiveness and can successfully evaluate and predict mixed-modeⅠ/Ⅲfracture toughness of distinct materials and loading methods.

Borehole stability in naturally fractured rocks with drilling mud intrusion and associated fracture strength weakening:A coupled DFN-DEM approach

Borehole instability in naturally fractured rocks poses significant challenges to drilling.Drilling mud invades the surrounding formations through natural fractures under the difference between the wellbore pressure(P w)and pore pressure(P p)during drilling,which may cause wellbore instability.However,the weakening of fracture strength due to mud intrusion is not considered in most existing borehole stability analyses,which may yield significant errors and misleading predictions.In addition,only limited factors were analyzed,and the fracture distribution was oversimplified.In this paper,the impacts of mud intrusion and associated fracture strength weakening on borehole stability in fractured rocks under both isotropic and anisotropic stress states are investigated using a coupled DEM(distinct element method)and DFN(discrete fracture network)method.It provides estimates of the effect of fracture strength weakening,wellbore pressure,in situ stresses,and sealing efficiency on borehole stability.The results show that mud intrusion and weakening of fracture strength can damage the borehole.This is demonstrated by the large displacement around the borehole,shear displacement on natural fractures,and the generation of fracture at shear limit.Mud intrusion reduces the shear strength of the fracture surface and leads to shear failure,which explains that the increase in mud weight may worsen borehole stability during overbalanced drilling in fractured formations.A higher in situ stress anisotropy exerts a significant influence on the mechanism of shear failure distribution around the wellbore.Moreover,the effect of sealing natural fractures on maintaining borehole stability is verified in this study,and the increase in sealing efficiency reduces the radial invasion distance of drilling mud.This study provides a directly quantitative prediction method of borehole instability in naturally fractured formations,which can consider the discrete fracture network,mud intrusion,and associated weakening of fracture strength.The information provided by the numerical approach(e.g.displacement around the borehole,shear displacement on fracture,and fracture at shear limit)is helpful for managing wellbore stability and designing wellbore-strengthening operations.

Management of geriatric acetabular fractures:Contemporary treatment strategies

Acetabular fractures in the geriatric population are typically low-energy fractures resulting from a fall from standing height.Compromised bone quality in the elderly,as well as this population’s concomitant medical comorbidities,render the management of such fractures challenging and controversial.Non-operative management remains the mainstay of treatment,although such a choice is associated with numerous and serious complications related to both the hip joint as well as the general condition of the patient.On the other hand,operatively treating acetabular fractures(e.g.,with osteosynthesis or total hip arthroplasty)is gaining popularity.Osteosynthesis can be performed with open reduction and internal fixation or with minimally invasive techniques.Total hip arthroplasty could be performed either in the acute phase combined with osteosynthesis or as a delayed procedure after a period of non-operative management or after failed osteosynthesis of the acetabulum.Regardless of the implemented treatment,orthogeriatric co-management is considered extremely crucial,and it is currently one of the pillars of a successful outcome after an acetabular fracture.

Epidemiologic investigation of pediatric distal humerus fractures: An American insurance claims database study

BACKGROUND Distal humerus elbow fractures are one of the most common traumatic fractures seen in pediatric patients and present as three main types:Supracondylar(SC),lateral condyle(LC),and medial epicondyle(ME)fractures.AIM To evaluate the epidemiology of pediatric distal humerus fractures(SC,LC,and ME)from an American insurance claims database.METHODS A retrospective review was performed on patients 17 years and younger with the ICD 9 and 10 codes for SC,LC and ME fractures based on the IBM Truven MarketScan®Commercial and IBM Truven MarketScan Medicare Supplemental databases.Patients from 2015 to 2020 were queried for treatments,patient age,sex,length of hospitalization,and comorbidities.RESULTS A total of 1133 SC,154 LC,and 124 ME fractures were identified.SC fractures had the highest percentage of operation at 83%,followed by LC(78%)and ME fractures(41%).Male patients were,on average,older than female patients for both SC and ME fractures.CONCLUSION In the insurance claims databases used,SC fractures were the most reported,followed by LC fractures,and finally ME fractures.Age was identified to be a factor for how a pediatric distal humerus fractures,with patients with SC and LC fractures being younger than those with ME fractures.The peak age per injury per sex was similar to reported historic central tendencies,despite reported trends for younger physiologic development.

Management and classification of the fracture of lateral process of talus:An overview and literature update

Fracture of the lateral process of the talus(FLPT)is uncommon in clinical practice and can be easily missed or misdiagnosed.In recent years,as researchers from all over the world have further deepened their research on FLPT,there has been a breakthrough in the classification,and the methods and principles of clinical management have changed accordingly;however,there is still no standardized guideline for the diagnosis and management of FLPT,and there have been few relevant literature review articles related to this kind of fracture in the past at least 5 years.In this article,we review the clinical classification,classification-based therapeutic recommendations,and prognosis of FLPT,with the aim of providing a reference for the clinical diagnosis and management of this infrequent fracture.

Assessing the readability of online information about jones fracture

BACKGROUND Hand in hand with technological advancements,treatment modalities continue to grow.With the turn of the century,the internet has become the number one source of information for almost every topic.Thus,many patients look toward the internet as their primary source of information to learn about their respective medical conditions.The American Medical Association and National Institute of Health strongly recommend that online medical information be written at the 6th to 8th-grade level to aid comprehension by patients of all literacy backgrounds.AIM To assess the readability of online information regarding Jones fracture.Our hypothesis is that the reading level of medical information published on websites far exceeds the recommended reading level of 6th-8th grade as proposed by the American Medical Associate and National Institute of Health.The result of this study can help us formulate improved recommendations for publishing more comprehensible material and,thus,eventually improve patient compliance and clinical outcomes.METHODS The exact phrase“Jones fracture”was queried on the three most common search engines,Google,Yahoo!,and Bing,on December 28,2022.As of December 2022,Google held 84%,Bing held 9%,and Yahoo!held 2%of the worldwide search engine market share.Web pages uniform resource locator from the first three pages of search results were recorded from each search engine.These web pages were classified according to academic,physician-sponsored,governmental and non-government organizations(NGO),commercial,and unspecified as per formally defined categories.Websites associated with an educational institution or medical organization were classified as academic.Websites with products for sale,corporate sponsorship,or advertisements were classified as commercial.Governmental websites or NGOs comprised those that received government subsidies or grants.Webpages that were independently owned by physicians or physician groups were respectively classed as physician sponsored.The remainder of websites that did not fall under the above categories were classified as unspecified.RESULTS A total of 93 websites were analyzed for reading assessment.A whopping 44%of websites were commercial,followed by 22%of physician-sponsored websites.Third place belonged to non-government organization websites holding a 15%share.The academic website held a meager 9%portion,while unspecified sites were 3%.The table illustrates mean readability scores,along with average cumulative grade level.The average grade level was 10.95±2.28 for all websites,with a range of 6.18 to 18.90.Since P values were more than 0.05,there was not a significant statistical difference between the first page results and the results of all pages.Thus,we can rationalize that readability scores are consistent throughout all pages of a website.CONCLUSION Hand in hand with technological advancements,treatment modalities continue to grow.With the turn of the century,the internet has become the number one source of information for almost every topic.Thus,many patients look towards the internet as the primary source of information to learn about their respective medical conditions.Our study demonstrates that current online medical information regarding Jones fracture is written at an extraordinarily high-grade level,with an average grade level of all websites at 10.95,nearly an 10th-grade educational level.The American Medical Association and National Institute of Health strongly recommend that online medical information should be written at the 6th to 8th-grade level to aid comprehension by patients of all literacy backgrounds.On the contrary,most of the medical information evaluated was at an 10th-grade level,which far exceeds recommendations by AMA and NIH.This is particularly relevant because readability scores are directly proportional to the level of comprehension attained by readers,thus directly impacting patient outcomes.In conclusion,we suggest and encourage that all online reading materials should be re-written at the 6th to 8th-grade level in a public service effort to increase compliance with treatment goals and raise awareness of preventive measures.

Production induced fracture closure of deep shale gas well under thermo-hydro-mechanical conditions

Deep shale gas reservoirs have geological characteristics of high temperature,high pressure,high stress,and inferior ability to pass through fluids.The multi-stage fractured horizontal well is the key to exploiting the deep shale gas reservoir.However,during the production process,the effectiveness of the hydraulic fracture network decreases with the closure of fractures,which accelerates the decline of shale gas production.In this paper,we addressed the problems of unclear fracture closure mechanisms and low accuracy of shale gas production prediction during deep shale gas production.Then we established the fluid—solid—heat coupled model coupling the deformation and fluid flow among the fracture surface,proppant and the shale matrix.When the fluid—solid—heat coupled model was applied to the fracture network,it was well solved by our numerical method named discontinuous discrete fracture method.Compared with the conventional discrete fracture method,the discontinuous discrete fracture method can describe the three-dimensional morphology of the fracture while considering the effect of the change of fracture surface permeation coefficient on the coupled fracture—matrix flow and describing the displacement discontinuity across the fracture.Numerical simulations revealed that the degree of fracture closure increases as the production time proceeds,and the degree of closure of the secondary fractures is higher than that of the primary fractures.Shale creep and proppant embedment both increase the degree of fracture closure.The reduction in fracture surface permeability due to proppant embedment reduces the rate of fluid transfer between matrix and fracture,which has often been overlooked in the past.However,it significantly impacts shale gas production,with calculations showing a 24.7%cumulative three-year yield reduction.This study is helpful to understand the mechanism of hydraulic fracture closure.Therefore,it provides the theoretical guidance for maintaining the long-term effectiveness of hydraulic fractures.

Visualization and characterization of experimental hydraulic fractures interacting with karst fracture-cavity distributions

Karst fracture-cavity carbonate reservoirs,in which natural cavities are connected by natural fractures to form cavity clusters in many circumstances,have become significant fields of oil and gas exploration and exploitation.Proppant fracturing is considered as the best method for exploiting carbonate reservoirs;however,previous studies primarily focused on the effects of individual types of geological formations,such as natural fractures or cavities,on fracture propagation.In this study,true-triaxial physical simulation experiments were systematically performed under four types of stress difference conditions after the accurate prefabrication of four types of different fracture-cavity distributions in artificial samples.Subsequently,the interaction mechanism between the hydraulic fractures and fracture-cavity structures was systematically analyzed in combination with the stress distribution,cross-sectional morphology of the main propagation path,and three-dimensional visualization of the overall fracture network.It was found that the propagation of hydraulic fractures near the cavity was inhibited by the stress concentration surrounding the cavity.In contrast,a natural fracture with a smaller approach angle(0°and 30°)around the cavity can alleviate the stress concentration and significantly facilitate the connection with the cavity.In addition,the hydraulic fracture crossed the natural fracture at the 45°approach angle and bypassed the cavity under higher stress difference conditions.A new stimulation effectiveness evaluation index was established based on the stimulated reservoir area(SRA),tortuosity of the hydraulic fractures(T),and connectivity index(CI)of the cavities.These findings provide new insights into the fracturing design of carbonate reservoirs.

Identifying the real fracture hidden in rock microcrack zone by acoustic emission energy

Identifying the real fracture of rock hidden in acoustic emission(AE)source clusters(AE-depicted microcrack zone)remains challenging and crucial.Here we revealed the AE energy(representing dissipated energy)distribution rule in the rock microcrack zone and proposed an AE-energy-based method for identifying the real fracture.(1)A set of fracture experiments were performed on granite using wedgeloading,and the fracture process was detected and recorded by AE.The microcrack zone associated with the energy dissipation was characterized by AE sources and energy distribution,utilizing our selfdeveloped AE analysis program(RockAE).(2)The accumulated AE energy,an index representing energy dissipation,across the AE-depicted microcrack zone followed the normal distribution model(the mean and variance relate to the real fracture path and the microcrack zone width).This result implies that the nucleation and coalescence of massive cracks(i.e.,real fracture generation process)are supposed to follow a normal distribution.(3)Then,we obtained the real fracture extension path by joining the peak positions of the AE energy normal distribution curve at different cross-sections of the microcrack zone.Consequently,we distinguished between the microcrack zone and the concealed real fracture within it.The deviation was validated as slight as 1–3 mm.

Mechanisms of fracture propagation from multi-cluster using a phase field based HMD coupling model in fractured reservoir

Natural fractures(NFs)are common in shale and tight reservoirs,where staged multi-cluster fracturing of horizontal wells is a prevalent technique for reservoir stimulation.While NFs and stress interference are recognized as significant factors affecting hydraulic fracture(HF)propagation,the combined influence of these factors remains poorly understood.To address this knowledge gap,a novel coupled hydromechanical-damage(HMD)model based on the phase field method is developed to investigate the propagation of multi-cluster HFs in fractured reservoirs.The comprehensive energy functional and control functions are established,while incorporating dynamic fluid distribution between multiple perforation clusters and refined changes in rock mechanical parameters during hydraulic fracturing.The HMD coupled multi-cluster HF propagation model investigates various scenarios,including single HF and single NF,reservoir heterogeneity,single HF and NF clusters,and multi-cluster HFs with NF clusters.The results show that the HMD coupling model can accurately capture the impact of approach angle(θ),stress difference and cementation strength on the interaction of HF and NF.The criterion of the open and cross zones is not fixed.The NF angle(a)is not a decisive parameter to discriminate the interaction.According to the relationship between approach angle(θ)and NF angle(a),the contact relationship of HF can be divided into three categories(θ=a,θ<a,andθ>a).The connected NF can increase the complexity of HF by inducing it to form branch fracture,resulting in a fractal dimension of HF as high as2.1280 at angles of±45°.Inter-fracture interference from the heel to the toe of HF shows the phenomenon of no,strong and weak interference.Interestingly,under the influence of NFs,distant HFs from the injection can become dominant fractures.However,as a gradually increases,inter-fracture stress interference becomes the primary factor influencing HF propagation,gradually superseding the dominance of NF induced fractures.

Blood Calcium as a Protective Factor against Traumatic Fracture

Purpose: This study aims to investigate the predictive value of blood calcium in the prognosis of traumatic fracture. Methods: A retrospective experimental design was employed, 112 cases (52 non-fracture and 60 traumatic fracture) were randomly selected. The type of fracture complies with WHO-recommended (2019) diagnostic criteria for osteoporosis combined with fracture. The blood pressure (BP) was measured by OMRON’s HEM-7136 model electronic blood pressure monitor. Blood calcium (Ca2+), and blood phosphorus (P) values were measured using Colorimetric Roche kits on a Roche/Hitachi fully automated biochemical analyzer. Data collection and analysis followed. Results: Higher levels of age, systolic and diastolic blood pressures were found in the traumatic fracture group compared to the control group, whereas weight, height, and blood phosphorus did not differ significantly (P adjusting for age, systolic blood pressure, diastolic blood pressure, and blood phosphorus, binary logistic regression analysis revealed that blood calcium was a protective factor against traumatic fracture (β = -26.85, OR = 0.00, 95% CI = 0.00 -0.02, P = 0.022). Conclusion: The findings suggest that high and low blood calcium levels may serve as useful indicators in predicting the prognosis of fractures resulting from trauma.

Clinical outcomes of triceps reflecting anconeus pedicle and olecranon osteotomy approach for distal humerus intercondylar fractures

BACKGROUND The preferred treatment for distal humeral intercondylar fractures is open reduction and internal fixation.While there is consensus about the posterior approach,several posterior approaches have been developed.It is debatable as to which approach is best.AIM To compare triceps reflecting anconeus pedicle(TRAP)and olecranon osteotomy approaches for internal fixation of distal humeral intercondylar fracture.METHODS In total,40 cases of Arbeitsgemeinschaft für Osteosynthesefragen/Association of the Study of Internal Fixation type C,closed,and Gustilo type I intercondylar humeral fractures were included.Patients ranged in age from 18 years to 70 years.The patients were randomized into two groups:TRAP group and olecranon osteotomy group,with 20 cases in each.All were followed up at 6 wk,3 months,6 months,and 12 months.Functional outcomes were measured in terms of flexion-extension arc,Disabilities of Arm,Shoulder and Hand score,and Mayo Elbow Performance Score.RESULTS The mean age was 43.2 years in the TRAP group and 37.5 years in the olecranon osteotomy group.The mean operative time and mean duration of hospital stay in the TRAP group were significantly higher than in the olecranon osteotomy group(119.5 vs 111.5 min and 9.85 vs 5.45 d,respectively).The mean arc of flexion-extension,Disabilities of Arm,Shoulder and Hand score,and Mayo Elbow Performance Score were comparable without any significant difference in the groups at the 12-month follow-up(107.0 vs 106.2,18.3 vs 15.7,and 84.2 vs 86.2,respectively).Ulnar paresthesia and superficial infections were comparable in both groups(2 cases vs 3 cases and 3 cases vs 2 cases,respectively).Hardware prominence was significantly higher in the olecranon osteotomy group,mostly due to tension band wiring.CONCLUSION Both approaches were equivalent,but there is a need for further study including higher numbers of subjects and longer study duration to prove the benefits of one approach over the other.

Study on the Impact of Massive Refracturing on the Fracture Network in Tight Oil Reservoir Horizontal Wells

Class III tight oil reservoirs have low porosity and permeability,which are often responsible for low production rates and limited recovery.Extensive repeated fracturing is a well-known technique to fix some of these issues.With such methods,existing fractures are refractured,and/or new fractures are created to facilitate communication with natural fractures.This study explored how different refracturing methods affect horizontal well fracture networks,with a special focus on morphology and related fluid flow changes.In particular,the study relied on the unconventional fracture model(UFM).The evolution of fracture morphology and flow field after the initial fracturing were analyzed accordingly.The simulation results indicated that increased formation energy and reduced reservoir stress differences can promote fracture expansion.It was shown that the length of the fracture network,the width of the fracture network,and the complexity of the fracture can be improved,the oil drainage area can be increased,the distance of oil and gas seepage can be reduced,and the production of a single well can be significantly increased.

Clinical Study of Tianji Robotic-Assisted Surgery for Upper Cervical Spine Fractures

Object: To compare the safety, clinical efficacy, and complication rate of “Tianji” robot-assisted surgery with traditional open surgery in the treatment of cervical vertebrae fracture. Methods: 60 patients with upper cervical vertebrae fracture admitted to Baise People’s Hospital between November 2018 and April 2024 were retrospectively analyzed. Among these patients, 29 underwent “Tianji” robot-assisted surgery (Robot group), and 31 underwent traditional C-arm fluoroscopy-assisted open surgery (Open group). Statistical analysis of the data was performed using SPSS 27.0 software to compare general data (gender, age, BMI), preoperative and postoperative visual analogue scale (VAS) scores, neck disability index (NDI), intraoperative blood loss, accuracy of screw placement on imaging, and the number of complications in both groups for comprehensive evaluation. A P value < 0.05 was deemed to have achieved statistical significance. Results: There was no significant difference in preoperative VAS scores between the two groups (Robot group: 8.34 ± 0.61;Open group: 8.26 ± 0.68, P = 0.317). There was also no significant difference in VAS scores at 1 week postoperatively (Robot group: 6.90 ± 0.31;Open group: 6.94 ± 0.36, P = 0.3237). Preoperative NDI scores showed no significant difference between the two groups (Robot group: 43.31 ± 2.67;Open group: 43.84 ± 2.67, P = 0.2227), and the difference in NDI scores at 1 week postoperatively was also not significant (Robot group: 35.69 ± 4.24;Open group: 37.35 ± 3.48, P = 0.0509). Intraoperative blood loss in the Robot group was significantly lower than in the Open group (246.21 ± 209 ml vs 380.65 ± 328.04 ml, P = 0.0308), with a statistically significant difference. The operation time was longer in the Robot group (3.75 ± 0.74 h) compared to the Open group (2.74 ± 0.86 h). In terms of screw placement accuracy, the Robot group had a higher accuracy rate for Class A screws compared to the Open group (102 screws vs 94 screws, P = 0.0487), and the accuracy rate for Class B screws was also higher in the Robot group (13 screws vs 29 screws, P = 0.0333), with both differences being statistically significant. There was no significant difference in the number of complications between the two groups (Robot group: 8 cases;Open group: 10 cases, P = 0.6931). Conclusion: Patients treated with “Tianji” robot-assisted surgery for upper cervical vertebrae fracture had lower intraoperative blood loss and higher screw placement accuracy compared to those undergoing traditional C-arm fluoroscopy-assisted open surgery, indicating that this robot-assisted surgery can effectively reduce intraoperative blood loss and improve screw placement accuracy.

Fracture network types revealed by well test curves for shale reservoirs in the Sichuan Basin,China

Pressure buildup testing can be used to analyze fracture network characteristics and conduct quantitative interpretation of relevant parameters for shale gas wells,thus providing bases for assessing the well productivity and formulating proper development strategies.This study establishes a new well test interpretation model for fractured horizontal wells based on seepage mechanisms of shale reservoirs and proposes a method for identifying fracturing patterns based on the characteristic slopes of pressure buildup curves and curve combination patterns.The pressure buildup curve patterns are identified to represent three types of shale reservoirs in the Sichuan Basin,namely the moderately deep shale reservoirs with high pressure,deep shale reservoirs with ultra-high pressure,and moderately deep shale reservoirs with normal pressure.Based on this,the relationship between the typical pressure buildup curve patterns and the fracture network types are put forward.Fracturing effects of three types of shale gas reservoir are compared and analyzed.The results show that typical flow patterns of shale reservoirs include bilinear flow in primary and secondary fractures,linear flow in secondary fractures,bilinear flow in secondary fractures and matrix,and linear flow in matrix.The fracture network characteristics can be determined using the characteristic slopes of pressure buildup curves and curve combinations.The linear flow in early secondary fractures is increasingly distinct with an increase in primary fracture conductivity.Moreover,the bilinear flow in secondary fractures and matrix and the subsequent linear flow in the matrix occur as the propping and density of secondary fractures increase.The increase in the burial depth,in-situ stress,and stress difference corresponds to a decrease in the propping of primary fractures that expand along different directions in the shale gas wells in the Sichuan Basin.Four pressure buildup curve patterns exist in the Sichuan Basin and its periphery.The pattern of pressure buildup curves of shale reservoirs in the Yongchuan area can be described as 1/2/→1/4,indicating limited stimulated reservoir volume,poorly propped secondary fractures,and the forming of primary fractures that extend only to certain directions.The pressure buildup curves of shale reservoirs in the main block of the Fuling area show a pattern of 1/4/→1/2 or 1/2,indicating greater stimulated reservoir volume,well propped secondary fractures,and the forming of complex fracture networks.The pattern of pressure buildup curves of shale reservoirs in the Pingqiao area is 1/2/→1/4→/1/2,indicating a fracturing effect somewhere between that of the Fuling and Yongchuan areas.For reservoirs with normal pressure,it is difficult to determine fracture network characteristics from pressure buildup curves due to insufficient formation energy and limited liquid drainage.

Finite Element Analysis of Coronal Shear Fractures of the Femoral Neck: Displacement of the Femoral Head and Effect of Osteosynthetic Implants

Coronal shear fractures of the femoral neck (CSFF) are the most challenging to treat among proximal femur fractures, directly affecting the life expectancy of patients with osteoporosis. However, an adequate osteosynthesis method has not been elucidated yet. This study investigated the displacement direction of the femoral head fragment and its effect on the bone using finite element method. A finite element model for CSFF was developed from CT image data of a patient with osteoporosis using Mechanical Finder (ver. 11). Subsequently, finite element analyses were performed on six osteosynthesis models under maximum load applied during walking. The compressive stresses, tensile stresses, and compressive strains of each model were examined. The results suggested that the compressive and tensile stress distributions were concentrated on the anterior side of the femoral neck. Compressive strain distribution in the femoral head and neck was concentrated in four areas: at the tip of the blade or lag screw, the anteroinferior side of the blade or lag screw near the fracture site, and the upper right and lower left near the junction of the blade or lag screw and nail. Thus, the distribution of both these stresses revealed that the femoral head fragment was prone to anterior and inferior displacement. Distribution of compressive strains revealed the direction of the stress exerted by the osteosynthetic implant on the bone. The same results were observed in all osteosynthetic implants;thus, the findings could lay the foundation for developing methods for placing osteosynthetic implants less prone to displacement and the osteosynthetic implants themselves. In particular, the study provides insight into the optimal treatment of CSFF.

Axial load-share ratio testing to assess the healing of open tibial fractures treated with the Taylor Spatial Frame

Background:The Taylor Spatial Frame(TSF)has gained popularity among orthopedic surgeons for treating open fractures.However,a key challenge is the timely and safe removal of the frame.This study assessed the efficacy and safety of axial load-share ratio(ALSR)testing to evaluate callus healing strength after TSF treatment of open tibial fractures.Methods:A retrospective case-control study was conducted,analyzing 180 adult patients with open tibial fractures treated at Tianjin Hospital’s Orthopedic Limb Correction Unit between August 2019 and August 2022.All patients underwent TSF external fixation surgery,and were divided into two groups based on ALSR testing.Group I(92 patients)underwent ALSR testing,with frame removal if the test value fell below 5%.Traditional methods were used for fixator removal guidance in Group II(88 patients).Clinical outcomes,including fixation duration,complications after fixator removal,and Johner-Wruhs functional scores,were compared between the two groups.Results:The groups showed no statistically significant differences(P>0.05)in sex,age,injury side,body mass index,surgery timing,or fracture type.Group I had a significantly shorter fixation duration(25.85±5.57 weeks)compared to Group II(31.82±6.98 weeks)(P<0.05).Following fixator removal,Group I demonstrated superior Johner-Wruhs scores compared to Group II,indicating better outcomes(P<0.05).Complication rates did not differ significantly between the groups at the last follow-up(P>0.05).Conclusion:Regular postoperative ALSR testing could safely and effectively guide TSF removal following open tibial fracture treatment.This method significantly reduced fixation duration compared to traditional guidance methods while maintaining efficacy and safety.

Cemented vertebra and adjacent vertebra refractured in a chronic kidney disease-mineral and bone disorder patient: A case report

BACKGROUND Although percutaneous vertebral augmentation(PVA)is a commonly used procedure for treating vertebral compression fracture(VCF),the risk of vertebral refracture should be considered.Chronic kidney disease-mineral and bone disorder(CKD-MBD)is a systemic disease of mineral and bone metabolism.It is associated with an increased risk of fracture.Few studies have reported the use of PVA in patients with CKD-MBD.We herein report a rare case wherein the cemented vertebra and the adjacent vertebra refractured simultaneously in a CKD-MBD patient after PVA.CASE SUMMARY A 74-year-old man suffered from low back pain after taking a fall about 3 wk ago.According to physical examination,imaging and laboratory findings,diagnoses of T12 VCF,CKD-MBD,and chronic kidney disease stage 5 were established.He then received percutaneous vertebroplasty at T12 vertebra.Fourteen weeks later,he presented with T12 and L1 vertebral refractures caused by lumbar sprain.Once again,he was given PVA which was optimized for the refractured vertebrae.Although the short-term postoperative effect was satisfactory,he reported chronic low back pain again at the 3-month follow-up.CONCLUSION It is necessary that patients with CKD-MBD who have received PVA are aware of the adverse effects of CKD-MBD.It may increase the risk of vertebral refracture.Furthermore,the PVA surgical technique needs to be optimized according to the condition of the patient.The medium-and long-term effects of PVA remain uncertain in patients with CKD-MBD.

DICE:An open-source MATLAB application for quantification and parametrization of digital outcrop model-based fracture datasets

An open-source MATLAB application(app)named Discontinuity Intensity Calculator and Estimator(DICE)was developed in order to quantitatively characterize the fractures,or in more general,discontinuities within a rocky outcrop in three-dimensional(3D)digital data,such as digital outcrop model(DOM).The workflow proposed for the parametrization of the discontinuities consists of the following steps:(1)Analysis and mapping of the fractures detected within the 3D DOMs;(2)Calculation of the orientation,position and dimensions of discontinuities that are represented by best-fit circular planes;(3)Determining the discontinuity parameters(dimension,distribution,spacing and intensity)by the DICE algorithm using different 3D oriented sampling techniques(3D oriented scanline,3D oriented circular scan window and spherical scan volume).Different sampling methods were bench tested with a synthetic,as well as a natural case study,and compared in order to understand the advantages and limitations of each technique.The 3D oriented circular scan window appears to be the most effective method for fracture intensity estimation with high accuracy(error 0.4%)and stability with variations in scan radius.