Anti-plane electroelastic problems are studied by the Trefftz boundary element method (BEM) in this paper. The Trefftz BEM is based on a weighted residual formulation and indirect boundary approach. In particular th...Anti-plane electroelastic problems are studied by the Trefftz boundary element method (BEM) in this paper. The Trefftz BEM is based on a weighted residual formulation and indirect boundary approach. In particular the point-collocation and Galerkin techniques, in which the basic unknowns are the retained expansion coefficients in the system of complete equations, are considered. Furthermore, special Trefftz functions and auxiliary functions which satisfy exactly the specified boundary conditions along the slit boundaries are also used to derive a special purpose element with local defects. The path-independent integral is evaluated at the tip of a crack to determine the energy release rate for a mode Ⅲ fracture problem. In final, the accuracy and efficiency of the Trefftz boundary element method are illustrated by an example and the comparison is made with other methods.展开更多
The fracture splitting property of medium carbon steel 37MnSiS microalloyed with V up to 0. 45% was investigated by using simulated fracture splitting test,for the development of new crackable medium carbon steel to m...The fracture splitting property of medium carbon steel 37MnSiS microalloyed with V up to 0. 45% was investigated by using simulated fracture splitting test,for the development of new crackable medium carbon steel to manufacture high performance connecting rod. Conventional high carbon steel C70S6 was used for comparison. The results show that the volume fraction of both ferrite and V-rich M( C,N) particles increases,and the pearlite interlamellar spacing decreases with increasing V content,which in turn results in gradual increase of strength and decrease of ductility and impact energy. The fracture splitting property of the tested steel could be improved significantly due to the increase of V content mainly through the precipitation hardening mechanism of fine M( C,N) precipitates. The fraction of brittle cleavage fracture in the crack initiation area increases noticeably with increasing V content and full brittle cleavage fracture surface could be obtained when V content was increased to 0. 45%. It is concluded that medium carbon steel with V content higher than about 0. 28% possesses not only comparable or even higher mechanical properties with those of conventional steel C70S6,but also excellent fracture splitting property,and therefore,is more suitable to fabricate high performance fracture splitting connecting rod.展开更多
基金Project supported by the National Natural Science Foundation of China (No. 10472086).
文摘Anti-plane electroelastic problems are studied by the Trefftz boundary element method (BEM) in this paper. The Trefftz BEM is based on a weighted residual formulation and indirect boundary approach. In particular the point-collocation and Galerkin techniques, in which the basic unknowns are the retained expansion coefficients in the system of complete equations, are considered. Furthermore, special Trefftz functions and auxiliary functions which satisfy exactly the specified boundary conditions along the slit boundaries are also used to derive a special purpose element with local defects. The path-independent integral is evaluated at the tip of a crack to determine the energy release rate for a mode Ⅲ fracture problem. In final, the accuracy and efficiency of the Trefftz boundary element method are illustrated by an example and the comparison is made with other methods.
基金Item Sponsored by National High Technology Research and Development Program of China(2013AA031605)
文摘The fracture splitting property of medium carbon steel 37MnSiS microalloyed with V up to 0. 45% was investigated by using simulated fracture splitting test,for the development of new crackable medium carbon steel to manufacture high performance connecting rod. Conventional high carbon steel C70S6 was used for comparison. The results show that the volume fraction of both ferrite and V-rich M( C,N) particles increases,and the pearlite interlamellar spacing decreases with increasing V content,which in turn results in gradual increase of strength and decrease of ductility and impact energy. The fracture splitting property of the tested steel could be improved significantly due to the increase of V content mainly through the precipitation hardening mechanism of fine M( C,N) precipitates. The fraction of brittle cleavage fracture in the crack initiation area increases noticeably with increasing V content and full brittle cleavage fracture surface could be obtained when V content was increased to 0. 45%. It is concluded that medium carbon steel with V content higher than about 0. 28% possesses not only comparable or even higher mechanical properties with those of conventional steel C70S6,but also excellent fracture splitting property,and therefore,is more suitable to fabricate high performance fracture splitting connecting rod.