The effects of hurricane forward speed(V)and approach angle(θ)on storm surge are important and a systematic investigation covering possible and continuous ranges of these parameters has not been done before.Here we p...The effects of hurricane forward speed(V)and approach angle(θ)on storm surge are important and a systematic investigation covering possible and continuous ranges of these parameters has not been done before.Here we present such a study with a numerical experiment using the Finite Volume Community Ocean Model(FVCOM).The hurricane track is simplified as a straight line,such that V andθfully define the motion of the hurricane.The maximum surge is contributed by both free waves and a forced storm surge wave moving with the hurricane.Among the free waves,Kelvin-type waves can only propagate in the down-coast direction.Simulations show that those waves can only have a significant positive storm surge when the hurricane velocity has a down-coast component.The optimal values of V andθthat maximize the storm surge in an idealized semi-circular ocean basin are functions of the bathymetry.For a constant bathymetry,the maximum surge occurs when the hurricane approaches the coast from the normal direction when the free wave generation is minimal;for a stepped bathymetry,the maximum surge occurs at a certain acute approach angle which maximizes the duration of persistent wind forcing;a step-like bathymetry with a sloped shelf is similar to the stepped bathymetry,with the added possibility of landfall resonance when the free and forced waves are moving at about the same velocity.For other cases,the storm surge is smaller,given other parameters(hurricane size,maximum wind speed,etc.)unchanged.展开更多
Tube inversion including free deformation under conical die is an advanced forming process for manufacturing complicated thin-walled parts with high strength/weight ratio, high efficiency, and good flexibility for siz...Tube inversion including free deformation under conical die is an advanced forming process for manufacturing complicated thin-walled parts with high strength/weight ratio, high efficiency, and good flexibility for size changing.However, the successful reality of forming process, the change of deforming mode and shape and size of part formedare mainly on the die angle. Based on the analysis of the forming process, the model of rigid-plastic FEM (finiteelement method) is established and a numerical simulation system is developed. The effect of die angle on the tubeinversion forming process is investigated with the code developed. The results of the effect of half die angle on shapeof free deformation zone and on deforming load are obtained. There is an optimal die angle (about 75 deg), whichmakes the forming load minimum.展开更多
Let 0<γ<π be a fixed pythagorean angle. We study the abelian group Hr of primitive integral triangles (a,b,c) for which the angle opposite side c is γ. Addition in Hr is defined by adding the angles β opposi...Let 0<γ<π be a fixed pythagorean angle. We study the abelian group Hr of primitive integral triangles (a,b,c) for which the angle opposite side c is γ. Addition in Hr is defined by adding the angles β opposite side b and modding out by π-γ. The only Hr for which the structure is known is Hπ/2, which is free abelian. We prove that for generalγ, Hr has an element of order two iff 2(1- cosγ) is a rational square, and it has elements of order three iff the cubic (2cosγ)x3-3x2+1=0 has a rational solution 0<x<1. This shows that the set of values ofγ for which Hr has two-torsion is dense in [0, π], and similarly for three-torsion. We also show that there is at most one copy of either Z2 or Z3 in Hr. Finally, we give some examples of higher order torsion elements in Hr.展开更多
From the mixed variational principle, by the selection of the state variables and its dual variables, the Hamiltonian canonical equation for the dynamic analysis of shear deformable antisymmetric angle-ply laminated p...From the mixed variational principle, by the selection of the state variables and its dual variables, the Hamiltonian canonical equation for the dynamic analysis of shear deformable antisymmetric angle-ply laminated plates is derived, leading to the mathematical frame of symplectic geometry and algorithms, and the exact solution for the arbitrary boundary conditions is also derived by the adjoint orthonormalized symplectic expansion method. Numerical results are presented with the emphasis on the effects of length/thickness ratio, arbitrary boundary conditions, degrees of anisotropy, number of layers, ply-angles and the corrected coefficients of transverse shear.展开更多
Smart structure with active materials embedded in a rotating composite thin-walled beam is a class of typical structure which is using in study of vibration control of helicopter blades and wind turbine blades. The dy...Smart structure with active materials embedded in a rotating composite thin-walled beam is a class of typical structure which is using in study of vibration control of helicopter blades and wind turbine blades. The dynamic behavior investigation of these structures has significance in theory and practice. However, so far dynamic study on the above-mentioned structures is limited only the rotating composite beams with piezoelectric actuation. The free vibration of the rotating composite thin-walled beams with shape memory alloy（SMA） fiber actuation is studied. SMA fiber actuators are embedded into the walls of the composite beam. The equations of motion are derived based on Hamilton＇s principle and the asymptotically correct constitutive relation of single-cell cross-section accounting for SMA fiber actuation. The partial differential equations of motion are reduced to the ordinary differential equations of motion by using the Galerkin＇s method. The formulation for free vibration analysis includes anisotropy, pitch and precone angle, centrifugal force and SMA actuation effect. Numerical results of natural frequency are obtained for two configuration composite beams. It is shown that natural frequencies of the composite thin-walled beam decrease as SMA fiber volume and initial strain increase and the decrease in natural frequency becomes more significant as SMA fiber volume increases. The actuation performance of SMA fibers is found to be closely related to the rotational speeds and ply-angle. In addition, the effect of the pitch angle appears to be more significant for the lower-bending mode ones. Finally, in all cases, the precone angle appears to have marginal effect on free vibration frequencies. The developed model can be capable of describing natural vibration behaviors of rotating composite thin-walled beam with active SMA fiber actuation. The present work extends the previous analysis done for modeling passive rotating composite thin-walled beam.展开更多
Cu-Zn,Cu-Zn-Sn,Cu-Zn-Ni alloys were melted by vacuum smelter.The effect factors to the surface free energy of the alloys such as chemical composition,crystal structure and surface crystal lattice distortion etc.were i...Cu-Zn,Cu-Zn-Sn,Cu-Zn-Ni alloys were melted by vacuum smelter.The effect factors to the surface free energy of the alloys such as chemical composition,crystal structure and surface crystal lattice distortion etc.were investigated by OCA30 automatic contact angle test instrument,metallography microscope and XRD instrument etc.Results suggests:adding alloy element to Cu may increase its surface free energy,and the more kinds of alloy elements are added,the more surface free energy increases;the alloy element Sn an increase the surface free energy of Cu-Zn alloy;Cu-Zn alloy with fir-tree crystal structure,great phase discrepancy and obvious composition aliquation has greater surface free energy;Cu-Zn alloy with compounds and serious surface crystal lattice distortion has greater surface free energy.展开更多
In this study, the contact angles of three different reference liquids （including distilled water, diiodomethane, and formamide） and PF resin on the surfaces of Chinese fir （Cunningharnia lanceolata） samples untre...In this study, the contact angles of three different reference liquids （including distilled water, diiodomethane, and formamide） and PF resin on the surfaces of Chinese fir （Cunningharnia lanceolata） samples untreated or treated with different concentrations of ACQ-D （ammoniacal copper quat Type D） solutions were measured. Then, the surface free energy was calculated by two approaches： acid-base approach and geometric mean approach. ACQ-D treatment caused higher contact angles and lower surface free energies at a retention level corresponding to the commodity treated wood products. When wood was treated with much higher concentrations of ACQ-D, the total surface free energy of wood would be higher than the untreated control. Acid-base/polar components related with the hydrogen bonding state in wood were considered to be responsible for the observed changes according to the applied approaches. The hydrophobic properties and also higher contact angles of PF resin drop on wood surfaces after ACQ-D treatment at a reasonable retention level confirms the changes on surface free energy.展开更多
A super-hydrophilic functional ceramic was prepared by adjusting the chemical components of ceramic glaze. Effect of surface free energy of ceramic glaze on oil droplet shape and its behavior in water were studied. Th...A super-hydrophilic functional ceramic was prepared by adjusting the chemical components of ceramic glaze. Effect of surface free energy of ceramic glaze on oil droplet shape and its behavior in water were studied. The results show that water can spread on ceramic surface with high surface free energy, and oil droplet can aggregate rapidly and separate from the ceramic surface in water. For the ceramic with lower surface free energy, the polar shares are dependant on its easy-cleaning property. The higher the polar shares, the better the easy-cleaning property, and the easier the droplet separates from the ceramic surface in water.展开更多
针对频控阵(frequency diverse array,FDA)在对与目标位置相近的平台外干扰进行抑制时,传统FDA与非线性频偏结合不能实现距离-角度去耦合、对数递增FDA主瓣展宽较大和汉明窗加权FDA距离维旁瓣过高的问题,在充分研究汉明窗加权的线性FDA(...针对频控阵(frequency diverse array,FDA)在对与目标位置相近的平台外干扰进行抑制时,传统FDA与非线性频偏结合不能实现距离-角度去耦合、对数递增FDA主瓣展宽较大和汉明窗加权FDA距离维旁瓣过高的问题,在充分研究汉明窗加权的线性FDA(Hamming linear FDA,HL-FDA)方案的基础上,对4种频偏方案的性能进行了分析,提出采用FDA多输入多输出结构代替传统的一维均匀线性FDA结构,通过结合最小方差无失真响应(minimum variance distortion free respinse,MVDR)准则,将HL-FDA应用到MVDR自适应波束形成层面,对平台外干扰进行抑制。仿真验证了HL-FDA在结合MVDR自适应波束形成算法后能有效地对抗距离-角度二维平台外干扰。展开更多
聚丙烯(PP)是微流控芯片常用的加工材料,但由于PP表面非极性,表面能低,使得PP材料的微流控芯片胶粘接强度较差,难以满足使用要求。等离子体处理是聚合物表面改性常用的一种方法,系统研究了等离子体处理对于PP胶粘接强度的影响。利用光...聚丙烯(PP)是微流控芯片常用的加工材料,但由于PP表面非极性,表面能低,使得PP材料的微流控芯片胶粘接强度较差,难以满足使用要求。等离子体处理是聚合物表面改性常用的一种方法,系统研究了等离子体处理对于PP胶粘接强度的影响。利用光学接触角测量仪和扫描电子显微镜等对比分析了等离子体处理前后PP表面的接触角、自由能和微观形貌的变化,实验发现等离子体处理后PP表面去离子水的接触角由99°减小到了75°,表面自由能由31 m J/m2增大到了49 m J/m2,PP表面由疏水性变为了亲水性,并且表面出现了大量的纳米级凸起和凹坑,从而揭示了等离子体处理对于提高PP胶粘接强度的机理。对等离子体处理的工艺参数进行了优化,利用T剥离强度试验方法对PP的胶粘接强度进行了测试,PP的平均胶粘接强度提高了24%。展开更多
基金The National Key R&D Project under contract No.2017YFC1404201
文摘The effects of hurricane forward speed(V)and approach angle(θ)on storm surge are important and a systematic investigation covering possible and continuous ranges of these parameters has not been done before.Here we present such a study with a numerical experiment using the Finite Volume Community Ocean Model(FVCOM).The hurricane track is simplified as a straight line,such that V andθfully define the motion of the hurricane.The maximum surge is contributed by both free waves and a forced storm surge wave moving with the hurricane.Among the free waves,Kelvin-type waves can only propagate in the down-coast direction.Simulations show that those waves can only have a significant positive storm surge when the hurricane velocity has a down-coast component.The optimal values of V andθthat maximize the storm surge in an idealized semi-circular ocean basin are functions of the bathymetry.For a constant bathymetry,the maximum surge occurs when the hurricane approaches the coast from the normal direction when the free wave generation is minimal;for a stepped bathymetry,the maximum surge occurs at a certain acute approach angle which maximizes the duration of persistent wind forcing;a step-like bathymetry with a sloped shelf is similar to the stepped bathymetry,with the added possibility of landfall resonance when the free and forced waves are moving at about the same velocity.For other cases,the storm surge is smaller,given other parameters(hurricane size,maximum wind speed,etc.)unchanged.
基金The authors would like to thank the National Natural Science Foundation of China for Distinguished Young Scholar (No.50225518), NSFC (59775055) and Doctorate Foundation of Northwestern Polytechnical University for support to enable the perform ing of this research.
文摘Tube inversion including free deformation under conical die is an advanced forming process for manufacturing complicated thin-walled parts with high strength/weight ratio, high efficiency, and good flexibility for size changing.However, the successful reality of forming process, the change of deforming mode and shape and size of part formedare mainly on the die angle. Based on the analysis of the forming process, the model of rigid-plastic FEM (finiteelement method) is established and a numerical simulation system is developed. The effect of die angle on the tubeinversion forming process is investigated with the code developed. The results of the effect of half die angle on shapeof free deformation zone and on deforming load are obtained. There is an optimal die angle (about 75 deg), whichmakes the forming load minimum.
文摘Let 0<γ<π be a fixed pythagorean angle. We study the abelian group Hr of primitive integral triangles (a,b,c) for which the angle opposite side c is γ. Addition in Hr is defined by adding the angles β opposite side b and modding out by π-γ. The only Hr for which the structure is known is Hπ/2, which is free abelian. We prove that for generalγ, Hr has an element of order two iff 2(1- cosγ) is a rational square, and it has elements of order three iff the cubic (2cosγ)x3-3x2+1=0 has a rational solution 0<x<1. This shows that the set of values ofγ for which Hr has two-torsion is dense in [0, π], and similarly for three-torsion. We also show that there is at most one copy of either Z2 or Z3 in Hr. Finally, we give some examples of higher order torsion elements in Hr.
文摘From the mixed variational principle, by the selection of the state variables and its dual variables, the Hamiltonian canonical equation for the dynamic analysis of shear deformable antisymmetric angle-ply laminated plates is derived, leading to the mathematical frame of symplectic geometry and algorithms, and the exact solution for the arbitrary boundary conditions is also derived by the adjoint orthonormalized symplectic expansion method. Numerical results are presented with the emphasis on the effects of length/thickness ratio, arbitrary boundary conditions, degrees of anisotropy, number of layers, ply-angles and the corrected coefficients of transverse shear.
基金supported by National Natural Science Foundation of China (Grant No. 10972124)Shandong Provincial Natural Science Foundation of China (Grant Nos. Y2006F37, ZR2011EEM031)Science & Technology Project of Shandong Provincial Education Department of China (Grant No. J08LB04)
文摘Smart structure with active materials embedded in a rotating composite thin-walled beam is a class of typical structure which is using in study of vibration control of helicopter blades and wind turbine blades. The dynamic behavior investigation of these structures has significance in theory and practice. However, so far dynamic study on the above-mentioned structures is limited only the rotating composite beams with piezoelectric actuation. The free vibration of the rotating composite thin-walled beams with shape memory alloy（SMA） fiber actuation is studied. SMA fiber actuators are embedded into the walls of the composite beam. The equations of motion are derived based on Hamilton＇s principle and the asymptotically correct constitutive relation of single-cell cross-section accounting for SMA fiber actuation. The partial differential equations of motion are reduced to the ordinary differential equations of motion by using the Galerkin＇s method. The formulation for free vibration analysis includes anisotropy, pitch and precone angle, centrifugal force and SMA actuation effect. Numerical results of natural frequency are obtained for two configuration composite beams. It is shown that natural frequencies of the composite thin-walled beam decrease as SMA fiber volume and initial strain increase and the decrease in natural frequency becomes more significant as SMA fiber volume increases. The actuation performance of SMA fibers is found to be closely related to the rotational speeds and ply-angle. In addition, the effect of the pitch angle appears to be more significant for the lower-bending mode ones. Finally, in all cases, the precone angle appears to have marginal effect on free vibration frequencies. The developed model can be capable of describing natural vibration behaviors of rotating composite thin-walled beam with active SMA fiber actuation. The present work extends the previous analysis done for modeling passive rotating composite thin-walled beam.
基金This work was financially supported by the Key Technologies R&D Programme of Tianjin(06YFGZGX02400).
文摘Cu-Zn,Cu-Zn-Sn,Cu-Zn-Ni alloys were melted by vacuum smelter.The effect factors to the surface free energy of the alloys such as chemical composition,crystal structure and surface crystal lattice distortion etc.were investigated by OCA30 automatic contact angle test instrument,metallography microscope and XRD instrument etc.Results suggests:adding alloy element to Cu may increase its surface free energy,and the more kinds of alloy elements are added,the more surface free energy increases;the alloy element Sn an increase the surface free energy of Cu-Zn alloy;Cu-Zn alloy with fir-tree crystal structure,great phase discrepancy and obvious composition aliquation has greater surface free energy;Cu-Zn alloy with compounds and serious surface crystal lattice distortion has greater surface free energy.
基金Supported by the Foundation for the Author of National Excellent Doctoral Dissertation of China (Grant No. 200352)
文摘In this study, the contact angles of three different reference liquids （including distilled water, diiodomethane, and formamide） and PF resin on the surfaces of Chinese fir （Cunningharnia lanceolata） samples untreated or treated with different concentrations of ACQ-D （ammoniacal copper quat Type D） solutions were measured. Then, the surface free energy was calculated by two approaches： acid-base approach and geometric mean approach. ACQ-D treatment caused higher contact angles and lower surface free energies at a retention level corresponding to the commodity treated wood products. When wood was treated with much higher concentrations of ACQ-D, the total surface free energy of wood would be higher than the untreated control. Acid-base/polar components related with the hydrogen bonding state in wood were considered to be responsible for the observed changes according to the applied approaches. The hydrophobic properties and also higher contact angles of PF resin drop on wood surfaces after ACQ-D treatment at a reasonable retention level confirms the changes on surface free energy.
文摘A super-hydrophilic functional ceramic was prepared by adjusting the chemical components of ceramic glaze. Effect of surface free energy of ceramic glaze on oil droplet shape and its behavior in water were studied. The results show that water can spread on ceramic surface with high surface free energy, and oil droplet can aggregate rapidly and separate from the ceramic surface in water. For the ceramic with lower surface free energy, the polar shares are dependant on its easy-cleaning property. The higher the polar shares, the better the easy-cleaning property, and the easier the droplet separates from the ceramic surface in water.
文摘针对频控阵(frequency diverse array,FDA)在对与目标位置相近的平台外干扰进行抑制时,传统FDA与非线性频偏结合不能实现距离-角度去耦合、对数递增FDA主瓣展宽较大和汉明窗加权FDA距离维旁瓣过高的问题,在充分研究汉明窗加权的线性FDA(Hamming linear FDA,HL-FDA)方案的基础上,对4种频偏方案的性能进行了分析,提出采用FDA多输入多输出结构代替传统的一维均匀线性FDA结构,通过结合最小方差无失真响应(minimum variance distortion free respinse,MVDR)准则,将HL-FDA应用到MVDR自适应波束形成层面,对平台外干扰进行抑制。仿真验证了HL-FDA在结合MVDR自适应波束形成算法后能有效地对抗距离-角度二维平台外干扰。
文摘聚丙烯(PP)是微流控芯片常用的加工材料,但由于PP表面非极性,表面能低,使得PP材料的微流控芯片胶粘接强度较差,难以满足使用要求。等离子体处理是聚合物表面改性常用的一种方法,系统研究了等离子体处理对于PP胶粘接强度的影响。利用光学接触角测量仪和扫描电子显微镜等对比分析了等离子体处理前后PP表面的接触角、自由能和微观形貌的变化,实验发现等离子体处理后PP表面去离子水的接触角由99°减小到了75°,表面自由能由31 m J/m2增大到了49 m J/m2,PP表面由疏水性变为了亲水性,并且表面出现了大量的纳米级凸起和凹坑,从而揭示了等离子体处理对于提高PP胶粘接强度的机理。对等离子体处理的工艺参数进行了优化,利用T剥离强度试验方法对PP的胶粘接强度进行了测试,PP的平均胶粘接强度提高了24%。
