Size-dependent behaviors of viscoelastic axially functionally graded Timoshenko micro-beam considering Poisson effects

A size-dependent continuum-based model is developed for the functionally graded(FG)Timoshenko micro-beams with viscoelastic properties,in which material parameters vary according to the power law along its axial direction.The size effect is incorporated by employing the modified couple stress theory and Kelvin-Voigt viscoelastic model,so that viscous components are included in the stress and the deviatoric segments of the symmetric couple stress tensors.The components of strain,curvature,stress and couple stress are formulated by combining them with the Timoshenko beam theory.Based on the Hamilton principle,the governing differential equations and boundary conditions for the micro-beam are expressed with arbitrary beam section shape and arbitrary type of loads.The size effect,FG effect,Poisson effect,and the influence of the beam section shape on the mechanical behaviors of viscoelastic FG micro-beams are investigated by taking the simply supported micro-beam subjected to point load as an example.Results show that the size effect on deflection,normal stress and couple stress are obvious when the size of the micro-beam is small enough,and the FG effects are obvious when the size of the micro-beam is large enough.Moreover,the Poisson ratio influences the size effect significantly and the beam section shape is also an important factor influencing the mechanical behavior of the micro-beam.

Stabilizing Buried Interface via Synergistic Effect of Fluorine and Sulfonyl Functional Groups Toward Efficient and Stable Perovskite Solar Cells

The interfacial defects and energy barrier are main reasons for interfacial nonradiative recombination.In addition,poor perovskite crystallization and incomplete conversion of PbI_(2) to perovskite restrict further enhancement of the photovoltaic performance of the devices using sequential deposition.Herein,a buried interface stabilization strategy that relies on the synergy of fluorine(F)and sulfonyl(S=O)functional groups is proposed.A series of potassium salts containing halide and non-halogen anions are employed to modify SnO_(2)/perovskite buried interface.Multiple chemical bonds including hydrogen bond,coordination bond and ionic bond are realized,which strengthens interfacial contact and defect passivation effect.The chemical interaction between modification molecules and perovskite along with SnO_(2) heightens incessantly as the number of S=O and F augments.The chemical interaction strength between modifiers and perovskite as well as SnO_(2) gradually increases with the increase in the number of S=O and F.The defect passivation effect is positively correlated with the chemical interaction strength.The crystallization kinetics is regulated through the compromise between chemical interaction strength and wettability of substrates.Compared with Cl−,all non-halogen anions perform better in crystallization optimization,energy band regulation and defect passivation.The device with potassium bis(fluorosulfonyl)imide achieves a tempting efficiency of 24.17%.

Harmful Effects of MSG on Function of Hypothalamus-Pituitary-Target Gland System

It has been demonstrated that neonatal administration of monosodium glutamate (MSG) results in a clearly defined lesion of the arcuate nucleus (AN) of the hypothalamus.The present study shows that fat was accumulated in the abdomen of male rats treated with MSG; weights of the body, pituitary and testis were lower, 6-EP content in hypothalamus decreased while L-EnK content increased, serum LH, FSH, TSH, GH and TS levels all decreased in varying degrees while serum PRL level significantly increased. The cAMP content lowered in pituitary, but nor in testes; clear histological changes occurred in testicular tissue; Se-GSH-Px activity in both testis and adrenal gland lowered while LPO level significantly increased. Both Se-GSH-Px activity and LPO level in liver increased.These results indicate that MSG is harmful to the function of the hypothalamus-pituitarytarget system of neonatal rats

Fermi level pinning effects at gate–dielectric interfaces influenced by interface state densities

The dependences of Fermi-level pinning on interface state densities for the metal-dielectric, ploycrystalline silicon-dielectric, and metal silicide-dielectric interfaces are investigated by calculating their effective work functions and their pinning factors. The Fermi-level pinning factors and effective work functions of the metal-dielectric interface are observed to be more susceptible to the increasing interface state densities, differing significantly from that of the ploycrystalline silicon-dielectric interface and the metal silicide-dielectric interface. The calculation results indicate that metal silicide gates with high-temperature resistance and low resistivity are a more promising choice for the design of gate materials in metal-oxide semiconductor（MOS） technology.

Forest biodiversity, relationships to structural and functional attributes, and stability in New England forests

Background： Forest biodiversity is the foundation of many ecosystem services, and the effect of biodiversity on ecosystem functioning and processes （BEF） has been a central issue in biodiversity studies. Although many hypotheses have been developed to interpret global gradients of biodiversity, there has not been complete agreement on mechanisms controlling biodiversity patterns and distributions. Differences may be due to limited observation data and inconsistencies of spatial scales in analysis. Methods： In this study, we take advantage of USDA Forest Service forest inventory and analysis （FIA） data for exploring regional forest biodiversity and BEF in New England forests. The FIA data provide detailed information of sampled plots and trees for the region, including 6000 FIA plots and more than 33,000 individual trees. Biodiversity models were used to analyze the data. Results： Tree species diversity increases from the north to the south at a rate about 2-3 species per latitudinal degree. Tree species diversity is better predicted by tree height than forest age or biomass. Very different distribution patterns of two common maple species, sugar maple （Acer sdcchorum） and red maple （Acer rubrum）, highlight the vulnerability of sugar maple and its potential replacement by red maple on New England landscapes. Red maple generally already outperforms sugar maple, and will likely and continuously benefit from a changing climate in New England. Conclusions： We conclude that forest structure （height） and resources （biomass） are more likely foundational characteristics supporting biodiversity rather than biodiversity determining forest productivity and/or biomass. The potential replacement of red maple for sugar maple in the New England areas could affect biodiversity and stability of forest ecosystem functioning because sugar maple plays important ecological roles distinct from red maple that are beneficial to other tree species in northern hardwood forests. Such a change may not affect forest resilience in terms of forest productivity and biomass as these are similar in red maple and sugar maple, however, it would almost certainly alter forest structure across the landscape.

Comprehensive Reliability Allocation Method for CNC Lathes Based on Cubic Transformed Functions of Failure Mode and Effects Analysis

Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components,which is not applicable in some conditions.Aiming at solving the problem of CNC lathes reliability allocating,a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis（FMEA）is presented.Firstly,conventional reliability allocation methods are introduced.Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated.Subsequently,a cubic transformed function is established in order to overcome these limitations.Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence.Designers can choose appropriate transform amplitudes according to their requirements.Finally,a CNC lathe and a spindle system are used as an example to verify the new allocation method.Seven criteria are considered to compare the results of the new method with traditional methods.The allocation results indicate that the new method is more flexible than traditional methods.By employing the new cubic transformed function,the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.

Evaluation of the Effects of Cypermethrin on Female Reproductive Function by Using Rabbit Model and of the Protective Role of Chinese Propolis

The prophylactic effects of Chinese propolis against cypermethrin toxicity were evaluated by performing ovary and uterus histopathology, as well as by characterizing ovarian function, embryos, and litters. Cypermethrin induced atypia in the ovary and uterus, and decreased the ovulation sites and the number of embryos. Cypermethrin-induced oxidative stress during pregnancy, decreased the parturition rate as well as the number and weight of offspring and increased the incidence of morphological malformations in the offspring. Administration of propolis to cypermethrin-treated animals mitigated cypermethrin-induced reproductive toxicity.

Effects of cancer therapy on hippocampus-related function

Cancer treatments such as chemotherapy and radiotherapy are widely used to treat primary and metastatic cancers.Epidemiological studies have demonstrated that these types of treatment can effectively and successfully extend the lifespan of cancer patients,but they are also associated with various neurological complications such as cognitive deficits, seizures, and emotional problems （Taphoorn and Klein, 2004; Yang and Moon, 2013; Son et al., 2015b）.

EFFECT OF STRUCTURE OF FUNCTIONAL POLYMER ACTIVE MATERIALS ON PROPERTIES OF GADOLINIUM ION SELECTIVE ELECTRODE

In this paper,the functional polymeric active materials were prepared by the grafting copolymerization and their structure and properties were studied.The results show that the structure and properties of these ac- tive materials have the relative large effects on the properties of gadolinium ion selective electrodes.

The Effect of Functional Training on the Performance of Female Handball Players’Shooting Skills

A randomized grouping experiment was conducted to study the effect of 8-week functional training on shooting performance of Beijing female handball players.According to the athletes’FMS(functional movement screening)scoring results,they were randomly divided into 2 groups.The experimental group adopted an 8-week functional training,aiming at strengthening their core strength,joint stability,and the power chain of shooting techniques.The control group adopted the traditional strength training mode.ANOVA(analysis of variance)was adopted to analyze the different performance of the athletes from two groups on their FMS scores,distances of throwing,and 7-meter shooting speed before and after the experiment.The results show that:(1)the total FMS scores of the experimental group athletes have been increased more significantly than those of the control group,and the injuries per capita has been significantly reduced;(2)the athletes in the experimental group have more significantly improved performance in handball throwing and 7-meter shooting speed than those in the control group.It shows that 8 weeks of functional training may effectively improve the physical function of Beijing female handball players and their performance in two special skills of handball throwing and shooting speed.

Protective effects of sodium ferulate in vascular endothelial function during cardiopulmonary bypass

Objective Cardiopulmonary bypass (CPB) and its related ischemia reperfusion injury may cause endothelial cell injury. To study the protective effects of sodium ferulate in vascular endothelial function during CPB by testing the changes of vascular endothelial cell(CEC) ,nitric oxide(NO) and endothelin-1 (ET-1) in children with congenital heart disease. Methods Sixty patients

Effects of Lead on Systolic and Diastolic Cardiac Functions

In this paper, both systolic and diastolic cardiac functions were cvaluatcd in 54 lead exposed and 24 non-exposed workers by Doppler cchocardiography. With regard to systolic cardiac function, the results suggested that cardiac systolic function increased in exposed groups as a compensatory response for the effecl of lead on myocardium. To study left ventriculaf diastolic function, 2.5 MHz pulsed Doppler analyses of transmitral flow velocity were performed from apical four-chamber view. The results showed that timerelated parameters were comparable among all groups, but blood flow velocity through the mitral valve and Doppler area fractions changed significantly in lead-exposed groups as cvidenced by increased value A, decreased value E and E/A ratio. The decrease of diastolic cardiac function was more significant in lead intoxication group. It was also observed in this study that the activity in serum of thc MB isoenzyme of creatine phosphokinase (CPK-MB), one of the indices of myocardial damage, was significantly highcr in exposed group than that in control (P (0.05), and a positive correlation was found between CPK-MB activity and Pb-B. It denoted that the inereasing of lead burden leads to more release of CPK-MB from the myocardial cells and suggested the existence of slight myocardial damage, which, conceivably, might cause harm to diastolic cardiac function

Radiation Effects on the Immunological Functions and Membranes of Alveolar Macrophages of Rats

Alveolar macrophages (AM) from BCG activated Wistar rat were irradiated with different doses of Gamma rays in vitro. The effects of radiation on their immunological functions and membrane damage were studied. The non-specific cytotoxicity and specific phagocytosis of AM irradiated with dose of 0, 100, 300 and 500 Gy decreased with the increase in dose. The relative fractions of Lactate Dehydrogenase and Beta-glucuronidase (β-glu) activity in supernatant increased with the increase in dose. There was a correlation between the suppression of immunological functions and the degree of damage of cytoplasmic and lysosomal membranes of AM after irradiation. Na2SeO3, a protective agent of cell membranes, alleviated this effect on the suppressive cytotoxicity indices of irradiated AM.

Modeling size-dependent behaviors of axially functionally graded Bernoulli-Euler micro-beam

This work focus on the mechanical behaviors,which are related to the size effect,functionally graded(FG)effect and Poisson effect,of an axially functionally graded(AFG)micro-beam whose elastic modulus varies according to sinusoidal law along its axial direction.The displacement field of the AFG micro-beam is set according to the Bernoulli-Euler beam theory.Employing the modified couple stress theory(MCST),the components of strain,curvature,stress and couple stress are expressed by the second derivative of the deflection of the AFG micro-beam.A size-dependent model related to FG effect and Poisson effect,which includes the formulations of bending stiffness,deflection,normal stress and couple stress,is developed to predict the mechanical behaviors of the AFG microbeam by employing the principle of minimum potential energy.The mechanical behaviors of a simply supported AFG micro-beam are numerically investigated using the developed model for demonstrating the size effects,FG effects and Poisson effects of the AFG micro-beam.Results show that the mechanical behaviors of AFG micro-beams are distinctly size-dependent only when the ratio of micro-beam height to material length-scale parameter is small enough.The FG parameter is an important factor that determines and regulates the size-dependent behaviors of AFG micro-beams.The influences of Poisson’s ratio on the mechanical behaviors of AFG micro-beams are not negligible,and should be also considered in the design and analysis of an AFG micro-beam.This work supplies a theoretical basis and a technical reference for the design and analysis of AFG micro-beams in the related regions.

Establishment of a Mathematical Model for Mulberry Balanced Fertilization in Hilly Areas of Sichuan Province

In order to increase mulberry leaf yield and production efficiency in hilly areas of Sichuan Province through scientific fertilization,＂3414＂,a quadratic regression design for modern fertilization,was employed to simulate the regression relationship between mulberry leaf yield and major fertilizer elements including nitrogen（N）,phosphor（P） and potassium（K） among which mulberry leaf yield was the objective function and N,P and K were the regulatory factors to fertilization level.As a result,7 types of ternary,binary and monadic quadratic fertilizer effect functions of N,P and K fertilizer elements were established.The weight of fertilizer factors in the optimal mulberry leaf yield obtained by various types of functions was in decreasing order of KPKPNPKNKNNP,and the weight of fertilizer factors in the ratio of leaf yield to input was in decreasing order of K〉PK〉NPK〉P〉NK〉NP〉N.To be specific,the ternary quadratic fertilizer effect function（Y=20 313＋0.25X1＋43.48 X2＋34.47X3-0.01X1^2-0.14X2^2-0.06X3^2＋0.05X1X2＋0.02X1X3-0.07X2X3,in which X1,X2 and X3 indicate the fertilizer factors N,P and K,respectively） was a model containing all factors,thereby being a recommended fertilization program for mulberry field.Single factor effect analysis indicated that K fertilizer had the highest influence on mulberry leaf yield and ratio of leaf yield to input.Therefore,among all the simulation functions,the monadic quadratic fertilizer effect function of K fertilizer factor（Y=25 002.27＋44.728X3-0.084X32） leads to the optimal leaf yield and maximum ratio of leaf yield to input.By using the optimal fertilization program with 600 kg/hm2 N,210 kg/hm2 P2O5 and 254.33 kg/hm2 K2O,the optimal economic leaf yield obtained is 30 945.00 kg/hm2,the cost of fertilizer input is 4 403.65 yuan/hm2,and the ratio of leaf yield to input is as high as 17.57.After verification by production practices,the recommended fertilization indicators in the optimal mulberry fertilization program can provide reference for the construction of high-yield mulberry field in hilly areas of Sichuan Province.

Effect of PTCA and stenting on left ventricular diastolic function in patients with CHD

Objective The aim of this study was to determine the effect of successful coronary revascularisation on left ventricular diastolic function.Methods We consecutively studied the diastolic function by Doppler echocardiography in 125 patients with one vessel disease before and 48 hours after selective coronary angioplasty. The following parameters of left ventricular diastolic function were evaluated: peak early (VE, m/s) and peak late diastolic (VA, m/s) flow velocity, E/A ratio, acceleration time (AT, ms), deceleration time (DT, ms) and isovolumetric relaxation time (IVRT, ms). Ejection fraction (EF; %) was determined and used to characterise systolic left ventricular function. Results All of the patients were initially successful treated with coronary angioplasty (residual stenosis <40% ). In 98 patients( 78.4% ) stents were used to improve an inadequate result after coronary angioplasty. Both patient groups (27 patients with coronary angioplasty and 98 patients with combined coronary angioplasty and stent implantation) showed no relevant differences concerning sex, age, atherosclerotic risk factors, exercise capacity and results of exercise electrocardiography. All patients who underwent stent implantation showed an early improvement of left ventricular diastolic function 48 hours after revascularisation. Surprisingly there was no significant short term improvement (48 hours) of diastolic function in patients with initially successful angioplasty.Conclusions We suppose that stent implantation might normalize coronary blood flow faster than that of coronary balloon angioplasty.

Nonlinear Stark effect observed for carbon monoxide chemisorbed on gold core/palladium shell nanoparticle film electrodes, using in situ surface-enhanced Raman spectroscopy

The potential （E）-dependent vibrational behavior of a saturated CO adlayer on Au-core Pd-shell nanoparticle film electrodes was investigated over a wide potential range, in acidic, neutral, and basic solutions, using in situ surface-enhanced Raman spectroscopy （SERS）. Over the whole of the examined potential region （-1.5 to 0.55 V vs. NHE）, the peak frequencies of both the C-OM and the Pd-COM band （here, M denotes the multiply-bonded configuration） displayed three distinct linear regions： dvc oM/dE decreased from -185-207 （from -1.5 to -1.2 V） to -83-84 cm-1/V （-1.2 to -0.15 V）, and then to 43 cm-1/V （-0.2 to 0.55 V）; on the other hand, dvpd coM/dE changed from -10 to -8 cm I/V （from -1.5 to -1.2 V） to ^-31 to -30 cm-1/V （-1.2 to -0.15 V）, and then to -15 cm-1/V （-0.2 to 0.55 V）. The simultaneously recorded cyclic voltammograms revealed that at E 〈 -1.2 V, a hydro- gen evolution reaction （HER） occurred. With the help of periodic density functional theory calcula- tions using two different （2 × 2）-3CO slab models with Pd（111）, the unusually high dvc-oM/dE and the small dVPd-CoM/dE in the HER region were explained as being due to the conversion of COad from bridge to hollow sites, which was induced by the co-adsorbed hydrogen atoms formed from dissociated water at negative potentials.

Model Building of the Initial Crown Effect Rate in 4-High Mill

The code for calculating the crown effect rate of hot strip steel Was developed using the effect function method. The effect of the initial crown on the crown of the product in hot strip rolling was investigated. The coefficients of a polynomial of degree six for calculating the base value of initial crown effect rate in 4-high mill were determined and the compensation factors of per unit width rolling force, bending force, work roll crown and draft on the initial crown effect rate were given. The difference between the calculation result by established model and theoretical value obtained by effect function method was 4.88 μm when the strip width was 1.85 m.

A time-dependent numerical model of the mild-slope equation

On the basis of the previous studies, the simplest hyperbolic mild-slope equation has been gained and the linear time - dependent numerical model for the water wave propagation has been established combined with different boundary conditions. Through computing the effective surface displacement and transforming into the real transient wave motion, related wave factors will be calculated. Compared with Lin＇s model, analysis shows that calculation stability of the present model is enhanced efficiently, because the truncation errors of this model are only contributed by the dissipation terms, but those of Lin＇s model are induced by the convection terms, dissipation terms and source terms. The tests show that the present model succeeds the merit in Lin＇ s model and the computational program is simpler, the computational time is shorter, and the computational stability is enhanced efficiently. The present model has the capability of simulating transient wave motion by correctly predicting at the speed of wave propagation, which is important for the real - time forecast of the arrival time of surface waves generated in the deep sea. The model is validated against analytical solution for wave diffraction and experimental data for combined wave refraction and diffraction over a submerged elliptic shoal on a slope. Good agreements are obtained. The model can be applied to the theory research an d engineering applications about the wave propagation in a biggish area.

A STUDY OF B-P UNIFIED VISCOPLASTIC CONSTITUTIVE MODEL

By combining the Bodner-Partom constitutive model and equivalent stressfunction, finite element methods and program on analyzing non-elastic deformation and stress forthermal viscoplastic material are studied in this paper, and it's the first time that this materialmodel is used in a kind of engineering software-MARC. Thermal viscoplastic behavior of hightemperature alloy GH536 specimen with gap is analyzed by this program. The research results show itis feasible to analyze thermal viscoplastic behavior of specimen or structure by applying B-P model.