The effect of functional loads on free spanning pipeline's VIV response

During the operation and installation of offshore pipelines, high axial forces and pressures are experienced, and their effects cannot be neglected. In this article, the effect of internal flow velocity and functional loads on vortex-induced vibration （VIV） response is investigated. On the basis of the Hamilton principle, a differential equation was derived to describe the motion of a pinned-pinned tensioned spanning pipeline conveying fluid. The VIV response was calculated according to DNV-RP-F105 under different functional loads. The results showed that functional loads influence free spanning pipeline VIV response by changing the natural frequency. Internal flow velocity was found less important for VIV response than other functional load factors, such as effective axial force, because the speed in reality is not high enough to be significant. The research may provide a reference for sensitivity studies of the effect of functional loads on allowable free span lengths.

The Effects of Fatigue Cracks on Fastener Loads during Cyclic Loading and on the Stresses Used for Crack Growth Analysis in Classical Linear Elastic Fracture Mechanics Approaches

High strength threaded fasteners are widely used in the aircraft industry, and service experience shows that for structures where shear loading of the joints is significant, like skin splices, fuselage joints or spar caps-web attachments, more cracks are initiated and grow from the edges of the fastener holes than from features like fillets radii and corners or from large access holes. The main causes of this cracking are the stress concentrations introduced by the fastener holes and by the threaded fasteners themselves, with the most common damage site being at the edge of the fastener holes. Intuitively, it is easy to visualize that after the crack initiation, during the growth stages, some of the load transferred initially by the fastener at the cracked hole will decrease, and it will be shed to the adjacent fasteners that will carry higher loads than in uncracked condition. Using currently available computer software, the method presented in this paper provides a relatively quick and quantitatively defined solution to account for the effects of crack length on the fastener loads transfer, and on the far field and bypass loads at each fastener adjacent to the crack. At each location, these variations are determined from the 3-dimensional distribution of stresses in the joint, and accounting for secondary bending effects and fastener tilt. Two cases of a typical skins lap splice with eight fasteners in a two rows configuration loaded in tension are presented and discussed, one representative for wing or fuselage skins configurations, and the second case representative for cost effective laboratory testing. Each case presents five cracking scenarios, with the cracks growing from approx. 0.03 inch to either the free edge, next hole or both simultaneously.

A hardening load transfer function for rock bolts and its calibration using distributed fiber optic sensing

Confinement of rock bolts by the surrounding rock formation has long been recognized as a positive contributor to the pull-out behavior,yet only a few experimental works and analytical models have been reported,most of which are based on the global rock bolt response evaluated in pull-out tests.This paper presents a laboratory experimental setup aiming to capture the rock formation effect,while using distributed fiber optic sensing to quantify the effect of the confinement and the reinforcement pull-out behavior on a more local level.It is shown that the behavior along the sample itself varies,with certain points exhibiting stress drops with crack formation.Some edge effects related to the kinematic freedom of the grout to dilate are also observed.Regardless,it was found that the mid-level response is quite similar to the average response along the sample.The ability to characterize the variation of the response along the sample is one of the many advantages high-resolution fiber optic sensing allows in such investigations.The paper also offers a plasticity-based hardening load transfer function,representing a"slice"of the anchor.The paper describes in detail the development of the model and the calibration/determination of its parameters.The suggested model captures well the coupled behavior in which the pull-out process leads to an increase in the confining stress due to dilative behavior.

3D seismic response of a 2D hill-valley staggered topography modeled by a 2.5D multi-domain IBEM

A two and a half dimensional(2.5D)multi-domain indirect boundary element method(IBEM)is developed to study the wave scattering of obliquely incident P-,SV-and SH-waves by a hill-valley staggered topography in a multi-layered half-space.The IBEM algorithm includes using 2.5D full-space and half-space Green’s functions to construct scattered fields in decomposed closed and opened half-space regions,respectively,and using the dynamic stiffness method to solve the free fields.All regions are finally integrated by introducing the compatibility conditions to obtain the total wave fields.The proposed 2.5D IBEM has the flexibility in dealing with complex boundaries by directly applying the fictitious loads on the regions’boundaries,with a less storage requirement compared to the full 3D models.Besides,by combining the specific advantages of the two kinds of Green’s functions,the method is well suitable for handling coupled topographies with high accuracy.The method is validated by comparison with published results for a single valley as well as a single hill topography.The effects of height-to-width ratio of hill and layering on dynamic responses are further parametrically investigated by numerical implementations in frequency domain.Results show that the interaction between valley and hills can lead to a more significant amplification within the valley region,and dynamic responses are deeply influenced by the height-to-width of hill,simultaneously depending on incident angle and frequency.Besides,the site effects become more complex when the stratification feature is taken into account.

Maintenance Management Research of a Large-span Continuous Rigid Frame Bridge Based on Reliability Assessment by Using Strain Monitored Data

When the bridge components needing maintenance are the world problem at present,and the health monitoring system is considered to be a very help­ful tool for solving this problem.In this paper,a large number of strain data acquired from the structural health monitoring system(SHMS)installed on a continuous rigid frame bridge are adopted to do reliability assessment.Firstly,a calculation method of punctiform time-dependent reliability is proposed based on the basic reliability theory,and introduced how to cal­culate reliability of the bridge by using the stress data transformed from the strain data.Secondly,combined with“Three Sigma”principle and the basic pressure safety reserve requirement,the critical load effects distribu­tion function of the bridge is defined,and then the maintenance reliability threshold for controlling the unfavorable load state which appears in the early operation stage of this type bridge is suggested,and then the combi­nation of bridge maintenance management and health monitoring system is realized.Finally,the transformed stress distribution certifies that the load effects of concrete bridges practically have a normal distribution;as for the concrete continuous rigid frame bridge with C50 strength grade concrete,the retrofit reliability threshold should be valued at 6.13.The methodology suggested in this article can help bridge engineers do effective maintenance of bridges,which can effectively extend the service life of the bridge and bring better economic and social benefits.

Construction of homogeneous loading functions for elastoplastic damage models for concrete

Over the past 2 decades,tight restriction has been imposed on strength criteria of concrete by the combination of plasticity and damage in one theory.The present study aims at constructing plastic/damage loading functions for elastoplastic damage models for concrete that can perform more satisfactorily in 3D stress states.Numerous strength criteria of concrete are reorganized according to their simplest representations as Cartesian,cylindrical,mixed cylindrical-Cartesian,and other forms,and the homogeneity of loading functions discussed.It is found that under certain supplementary conditions from physical meanings,an unambiguous definition of the cohesion in a strength criterion,which is demanded in an elastoplastic damage model,is usually available in an explicit or implicit form,and in each case the loading function is still homogeneous.To apply and validate the presented theory,we construct the respective homogeneous damage and plastic loading functions and implant them into some widely used elastoplastic damage models for concrete,and their performances in triaxial compression prove to have improved significantly.

Static response of a layered magneto-electro-elastic half-space structure under circular surface loading

A cylindrical system of vector functions, the stiffness matrix method and the corresponding recursive algorithm are proposed to investigate the static response of transversely isotropic,layered magneto-electro-elastic（MEE） structures over a homogeneous half-space substrate subjected to circular surface loading. In terms of the system of vector functions, we expand the extended displacements and stresses, and deduce two sets of ordinary differential equations, which are related to the expansion coeficients. The solution to one of the two sets of these ordinary differential equations can be evaluated by using the stiffness matrix method and the corresponding recursive algorithm. These expansion coeficients are then integrated by adaptive Gaussian quadrature to obtain the displacements and stresses in the physical domain. Two types of surface loads, mechanical pressure and electric loading,are considered in the numerical examples. The calculated results show that the proposed technique is stable and effective in analyzing the layered half-space MEE structures under surface loading.

Assessment of the fraction of bed load concentration towards the sediment transport of a monsoon-dominated river basin of Eastern India

Given the challenges of re-creating complex bed load(BL)transport processes in rivers,models are preferred over gathering and examining field data.The highlight of the present research is to develop an approach to determine the ungauged bed load concentration(BLC_(u))utilizing the measured suspended sediment concentration(SSC)and hydraulic variables of the last four decades for the Mahanadi River Basin.This technique employs shear stress and SSC equations for turbulent open channel flow.Besides,the predicted BLC_(u)is correlated with SSC using a power relation to estimate BLC_(u)on the river and tributaries.Eventually,different BL functions(BLF)efficiency is assessed across stations.The model predicted BLC_(u)is comparable with the published data for sandy rivers and falls within±20%.Outliers in hydraulic and sedimentological statistics significantly influence estimating the BL fraction apart from higher relative ratios and catchment geology.The constants of power functions are physically linked to sediment transport configuration,mechanism,and inflow to the stream.The stream power-based BLF best predicts the BL transport,followed by shear stress and unit discharge approaches.The disparity in the estimation of BLC_(u)results from station-specific physical factors,sampling data dispersion,and associated uncertainties.

Application of SNi PER framework to BESⅢ physics analysis

A fast physics analysis framework has been developed based on SNi PER to process the increasingly large data sample collected by BESⅢ.In this framework,a reconstructed event data model with Smart Ref is designed to improve the speed of Input/Output operations,and necessary physics analysis tools are migrated from BOSS to SNi PER.A real physics analysis e~＋e^-→ π~＋π^-J/ψ is used to test the new framework,and achieves a factor of10.3 improvement in Input/Output speed compared to BOSS.Further tests show that the improvement is mainly attributed to the new reconstructed event data model and the lazy-loading functionality provided by Smart Ref.

Ontology-Driven Discovering Model for Geographical Information Services

This paper proposes an ontology-driven discovering model for the geographical information services to improve their recall ratio and precision ratio. This model uses the geographical information service ontology. In this paper, first we study the multilevel matching arithmetic of geographical information services. This arithmetic is used for filtering and matching the services in the service register center according to the similarity between services selected and services requested from the definition of the function similarity and credit standing similarity. The matching arithmetic, geographical information service ontology and semantic description constitute the discovering model. Finally, we test and analyze the model from the recall ratio, precision ratio, responsivity and load balance. The result indicates that the ontology-driven discovering model is excellent in recall ratio and precision ratio, and can maintain the dynamic load balance of service copy.