期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
GS6, A Member of the GRAS Gene Family,Negatively Regulates Grain Size in Rice 被引量:44
1
作者 Lianjun Sun Xiaojiao Li +6 位作者 Yongcai Fu Zuofeng Zhu Lubin Tan Fengxia Liu Xianyou Sun Xuewen Sun Chuanqing Sun 《Journal of Integrative Plant Biology》 SCIE CAS CSCD 2013年第10期938-949,共12页
Grain size is an important yield-related trait in rice. Intensive artificial selection for grain size during domestication is evidenced by the larger grains of most of today's cultivars compared with their wild relat... Grain size is an important yield-related trait in rice. Intensive artificial selection for grain size during domestication is evidenced by the larger grains of most of today's cultivars compared with their wild relatives. However, the molecular genetic control of rice grain size is still not well characterized. Here, we report the identification and cloning of Grain Size 6 (GS6), which plays an important role in reducing grain size in rice. A premature stop at the +348 position in the coding sequence (CDS) of GS6 increased grain width and weight significantly. Alignment of the CDS regions of GS6 in 90 rice materials revealed three GS6 alleles. Most japonica varieties (95%) harbor the Type I haplotype, and 62.9% of indica varieties harbor the Type II haplotype. Association analysis revealed that the Type I haplotype tends to increase the width and weight of grains more than either of the Type II or Type III haplotypes. Further investigation of genetic diversity and the evolutionary mechanisms of GS6 showed that the GS6 gene was strongly selected in japonica cultivars. In addition, a "ggc" repeat region identified in the region that encodes the GRAS domain of GS6 played an important historic role in the domestication of grain size in rice. Knowledge of the function of GS6 might aid efforts to elucidate the molecular mechanisms that control grain development and evolution in rice plants, and could facilitate the genetic improvement of rice yield. 展开更多
关键词 DOMESTICATION gs6 grain size HAPLOTYPE Oryza sativa rice.
原文传递
GS豫粳6号水稻的丰产稳产性及产量结构分析 被引量:2
2
作者 魏国庆 王书玉 张栩 《河南农业科学》 CSCD 2000年第7期6-7,共2页
利用河南省粳稻区域试验、生产示范及国家北方中晚粳区域试验资料 ,对GS豫粳 6号的丰产性、稳产性和产量结构进行了分析。结果表明 :GS豫粳 6号在产量构成三要素中 ,有效穗数对产量的直接作用最大 ,千粒重次之 ,穗粒数的直接作用最小。... 利用河南省粳稻区域试验、生产示范及国家北方中晚粳区域试验资料 ,对GS豫粳 6号的丰产性、稳产性和产量结构进行了分析。结果表明 :GS豫粳 6号在产量构成三要素中 ,有效穗数对产量的直接作用最大 ,千粒重次之 ,穗粒数的直接作用最小。因此 ,在高产栽培上 ,应主攻亩成穗数 ,同时兼顾穗粒数 ( 1 0 0粒左右 )和千粒重 ( 2 6g左右 )。 展开更多
关键词 水稻 GS豫粳6号 丰产性 稳产性 产量结构
下载PDF
活性嫩黄P-6GS及其中间体的合成研究 被引量:2
3
作者 金伟龙 卢沪萍 +3 位作者 刘玉石 李洪林 杨建 吴国栋 《染料与染色》 CAS 2012年第6期16-19,共4页
本文对活性嫩黄P-6GS及其中间体的合成路线进行了阐述,对其中间体的合成进行了深入研究。优化的工艺条件为中间体不经盐析析出,直接进行偶合、取代反应。合成的产品质量与国外样品相同。本工艺采用原浆喷雾干燥,属于清洁生产工艺。
关键词 活性嫩黄P-6GS 吡啶酮 偶合取代
下载PDF
GS24Mn6V钢铸件热处理工艺研究
4
作者 刘啟平 曾会书 +2 位作者 阳权 唐朝 叶建军 《铸造》 CAS CSCD 北大核心 2014年第11期1181-1184,共4页
通过一系列热处理试验,对GS24Mn6V钢铸件传统热处理工艺进行了大幅度改进:去掉退火或正火预处理工艺,提高了淬火和回火加热温度,缩短了淬火、回火保温时间,最后确定其最佳热处理工艺为:950℃×1 h盐水冷+630℃×2 h盐水冷(装炉... 通过一系列热处理试验,对GS24Mn6V钢铸件传统热处理工艺进行了大幅度改进:去掉退火或正火预处理工艺,提高了淬火和回火加热温度,缩短了淬火、回火保温时间,最后确定其最佳热处理工艺为:950℃×1 h盐水冷+630℃×2 h盐水冷(装炉量控制在1.5 t左右)。通过该工艺处理的GS24Mn6V钢铸件不仅力学性能和金相组织完全满足技术要求,而且大大缩短了生产周期,节约了生产成本,提高了工件的热处理质量,节能降耗的效果也非常显著。 展开更多
关键词 GS24Mn6V钢 铸件 淬火 加热温度
下载PDF
情喜:别克君威GS3.0V6旗舰板
5
作者 萧恩 《汽车与你》 2003年第2期66-72,共7页
关键词 别克君威GS3.0V6 旗舰板 轿车
下载PDF
君临天下——君威GS3.0V6
6
作者 陈欢 李耕 《轿车情报》 2003年第1期22-27,共6页
关键词 君威GS3.0V6 别克轿车 外形 内饰 舒适度
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部