Radiation-induced acoustic computed tomography(RACT)is an evolving biomedical imaging modality that aims to reconstruct the radiation energy deposition in tissues.Traditional backprojection(BP)reconstructions carry no...Radiation-induced acoustic computed tomography(RACT)is an evolving biomedical imaging modality that aims to reconstruct the radiation energy deposition in tissues.Traditional backprojection(BP)reconstructions carry noisy and limited-view artifacts.Model-based algorithms have been demonstrated to overcome the drawbacks of BPs.However,model-based algorithms are relatively more complex to develop and computationally demanding.Furthermore,while a plethora of novel algorithms has been developed over the past decade,most of these algorithms are either not accessible,readily available,or hard to implement for researchers who are not well versed in programming.We developed a user-friendly MATLAB-based graphical user interface(GUI;RACT2D)that facilitates back-projection and model-based image reconstructions for twodimensional RACT problems.We included numerical and experimental X-ray-induced acoustic datasets to demonstrate the capabilities of the GUI.The developed algorithms support parallel computing for evaluating reconstructions using the cores of the computer,thus further accelerating the reconstruction speed.We also share the MATLAB-based codes for evaluating RACT reconstructions,which users with MATLAB programming expertise can further modify to suit their needs.The shared GUI and codes can be of interest to researchers across the globe and assist them in e±cient evaluation of improved RACT reconstructions.展开更多
In this review, five graphical user interfaces(GUIs) used in radiation therapy practices and researches are introduced. They are:(1) the treatment time calculator, superficialx-ray treatment time calculator(SUPCALC) u...In this review, five graphical user interfaces(GUIs) used in radiation therapy practices and researches are introduced. They are:(1) the treatment time calculator, superficialx-ray treatment time calculator(SUPCALC) used in the superficial X-ray radiation therapy;(2) the monitor unit calculator, electron monitor unit calculator(EMUC) used in the electron radiation therapy;(3) the multileaf collimator machine file creator, sliding window intensity modulated radiotherapy(SWIMRT) used in generating fluence map for research and quality assurance in intensity modulated radiation therapy;(4) the treatment planning system, DOSCTP used in the calculation of 3D dose distribution using Monte Carlo simulation; and(5) the monitor unit calculator, photon beam monitor unit calculator(PMUC) used in photon beam radiation therapy. One common issue of these GUIs is that all user-friendly interfaces are linked to complex formulas and algorithms based on various theories, which do not have to be understood and noted by the user. In that case, user only needs to input the required information with help from graphical elements in order to produce desired results. SUPCALC is a superficial radiation treatment time calculator using the GUI technique to provide a convenient way for radiation therapist to calculate the treatment time, and keep a record for the skin cancer patient. EMUC is an electron monitor unit calculator for electron radiation therapy. Instead of doing hand calculation according to pre-determined dosimetric tables, clinical user needs only to input the required drawing of electron field in computer graphical file format, prescription dose, and beam parameters to EMUC to calculate the required monitor unit for the electron beam treatment. EMUC is based on a semi-experimental theory of sector-integration algorithm. SWIMRT is a multileaf collimator machine file creator to generate a fluence map produced by a medical linear accelerator. This machine file controls the multileaf collimator to deliver intensity modulated beams for a specific fluence map used in quality assurance or research. DOSCTP is a treatment planning system using the computed tomography images. Radiation beams(photon or electron) with different energies and field sizes produced by a linear accelerator can be placed in different positions to irradiate the tumour in the patient. DOSCTP is linked to a Monte Carlo simulation engine using the EGSnrc-based code, so that 3D dose distribution canbe determined accurately for radiation therapy. Moreover, DOSCTP can be used for treatment planning of patient or small animal. PMUC is a GUI for calculation of the monitor unit based on the prescription dose of patient in photon beam radiation therapy. The calculation is based on dose corrections in changes of photon beam energy, treatment depth, field size, jaw position, beam axis, treatment distance and beam modifiers. All GUIs mentioned in this review were written either by the Microsoft Visual Basic.net or a MATLAB GUI development tool called GUIDE. In addition, all GUIs were verified and tested using measurements to ensure their accuracies were up to clinical acceptable levels for implementations.展开更多
This paper deals with a problem of application generation together with their Graphic User Interface （GUI）. Particularly, the source code generator based on dynamic frames was improved for more effective specificati...This paper deals with a problem of application generation together with their Graphic User Interface （GUI）. Particularly, the source code generator based on dynamic frames was improved for more effective specification of GUI. It＇s too demanding for the developers to have specification of the application that contain all physical coordinates and other details of buttons and other GUI elements. The developed solution for this problem is based on post-processing of generated source code using iterators for specifying coordinates and other values of graphic elements. The paper includes two examples of generating web applications and their GUI.展开更多
In this paper, the design of a Graphical User Interface for CAN data frame monitoring is presented. The GUI has been developed in the Qt Creator IDE. A touch screen for visualization and control is used, which in turn...In this paper, the design of a Graphical User Interface for CAN data frame monitoring is presented. The GUI has been developed in the Qt Creator IDE. A touch screen for visualization and control is used, which in turn is controlled by a development board with a SoC Cyclone V, through which a Linux operating system is executed.展开更多
This paper aims at the presentation of an interface to simulate cardiovascular respiratory system. The authors are interested in the resolution of optimal control problem related to the performance of a 30 years old w...This paper aims at the presentation of an interface to simulate cardiovascular respiratory system. The authors are interested in the resolution of optimal control problem related to the performance of a 30 years old woman. The results show in the most case the determinant parameters of cardiovascular respiratory system reach the equilibrium value due to its controls that is heart rate and alveolar ventilation.展开更多
The user-computer interface for color selection is of great significance for the use of colors in computer graphics, particularly in some fields where the used colors have to be selected carefully. This paper discusse...The user-computer interface for color selection is of great significance for the use of colors in computer graphics, particularly in some fields where the used colors have to be selected carefully. This paper discusses what factors have to be considered to design an effective user interface for color selec- tion. It also presents a method which shows how to represent 3D color spaces according to the psychol- ogy of color perception. Two examples of user interface for color selection are given. One is based on the CLELUV uniform color space, the other is based on RGB-rotated color model.展开更多
Python作为一种跨平台的计算机程序设计语言,凭借其方便的安装和简洁的语法,被广泛应用于各个领域,且它的Tkinter工具包在可视化界面程序开发中也广受编程者的青睐。利用Python语言和Tkinter工具包设计身份证真伪验证系统,并结合SQLite...Python作为一种跨平台的计算机程序设计语言,凭借其方便的安装和简洁的语法,被广泛应用于各个领域,且它的Tkinter工具包在可视化界面程序开发中也广受编程者的青睐。利用Python语言和Tkinter工具包设计身份证真伪验证系统,并结合SQLite数据库进行数据操作,理解图形用户界面(Graphical User Interface,GUI)编程的逻辑思路,将代码以可视化的形式呈现,不受编程环境影响,从而实现人机交互。展开更多
This paper introduces a new version of the open-source educational software, LESM (Linear Elements Structure Model), developed in MATLAB for structural analysis of one-dimensional models such as frames, trusses, and g...This paper introduces a new version of the open-source educational software, LESM (Linear Elements Structure Model), developed in MATLAB for structural analysis of one-dimensional models such as frames, trusses, and grillages. The updated program includes dynamic analysis, which incorporates inertial and damping effects, time-dependent load conditions, and a transient solver with multiple time integration schemes. The software assumes small displacements and linear-elastic material behavior. The paper briefly explains the theoretical basis for these developments and the reorganization of the source code using Object-Oriented Programming (OOP). The updated Graphical User Interface (GUI) allows interactive use of dynamic analysis features and displays new results such as animations, envelope diagrams of internal forces, phase portraits, and the response of degrees-of-freedom in time and frequency domain. The new version was used in a structural dynamics course, and new assignments were elaborated to improve students’ understanding of the subject.展开更多
基金supported by the National Institute of Health (R37CA240806)and American Cancer Society (133697-RSG-19-110-01-CCE)support from UCI Chao Family Comprehensive Cancer Center (P30CA062203).
文摘Radiation-induced acoustic computed tomography(RACT)is an evolving biomedical imaging modality that aims to reconstruct the radiation energy deposition in tissues.Traditional backprojection(BP)reconstructions carry noisy and limited-view artifacts.Model-based algorithms have been demonstrated to overcome the drawbacks of BPs.However,model-based algorithms are relatively more complex to develop and computationally demanding.Furthermore,while a plethora of novel algorithms has been developed over the past decade,most of these algorithms are either not accessible,readily available,or hard to implement for researchers who are not well versed in programming.We developed a user-friendly MATLAB-based graphical user interface(GUI;RACT2D)that facilitates back-projection and model-based image reconstructions for twodimensional RACT problems.We included numerical and experimental X-ray-induced acoustic datasets to demonstrate the capabilities of the GUI.The developed algorithms support parallel computing for evaluating reconstructions using the cores of the computer,thus further accelerating the reconstruction speed.We also share the MATLAB-based codes for evaluating RACT reconstructions,which users with MATLAB programming expertise can further modify to suit their needs.The shared GUI and codes can be of interest to researchers across the globe and assist them in e±cient evaluation of improved RACT reconstructions.
文摘In this review, five graphical user interfaces(GUIs) used in radiation therapy practices and researches are introduced. They are:(1) the treatment time calculator, superficialx-ray treatment time calculator(SUPCALC) used in the superficial X-ray radiation therapy;(2) the monitor unit calculator, electron monitor unit calculator(EMUC) used in the electron radiation therapy;(3) the multileaf collimator machine file creator, sliding window intensity modulated radiotherapy(SWIMRT) used in generating fluence map for research and quality assurance in intensity modulated radiation therapy;(4) the treatment planning system, DOSCTP used in the calculation of 3D dose distribution using Monte Carlo simulation; and(5) the monitor unit calculator, photon beam monitor unit calculator(PMUC) used in photon beam radiation therapy. One common issue of these GUIs is that all user-friendly interfaces are linked to complex formulas and algorithms based on various theories, which do not have to be understood and noted by the user. In that case, user only needs to input the required information with help from graphical elements in order to produce desired results. SUPCALC is a superficial radiation treatment time calculator using the GUI technique to provide a convenient way for radiation therapist to calculate the treatment time, and keep a record for the skin cancer patient. EMUC is an electron monitor unit calculator for electron radiation therapy. Instead of doing hand calculation according to pre-determined dosimetric tables, clinical user needs only to input the required drawing of electron field in computer graphical file format, prescription dose, and beam parameters to EMUC to calculate the required monitor unit for the electron beam treatment. EMUC is based on a semi-experimental theory of sector-integration algorithm. SWIMRT is a multileaf collimator machine file creator to generate a fluence map produced by a medical linear accelerator. This machine file controls the multileaf collimator to deliver intensity modulated beams for a specific fluence map used in quality assurance or research. DOSCTP is a treatment planning system using the computed tomography images. Radiation beams(photon or electron) with different energies and field sizes produced by a linear accelerator can be placed in different positions to irradiate the tumour in the patient. DOSCTP is linked to a Monte Carlo simulation engine using the EGSnrc-based code, so that 3D dose distribution canbe determined accurately for radiation therapy. Moreover, DOSCTP can be used for treatment planning of patient or small animal. PMUC is a GUI for calculation of the monitor unit based on the prescription dose of patient in photon beam radiation therapy. The calculation is based on dose corrections in changes of photon beam energy, treatment depth, field size, jaw position, beam axis, treatment distance and beam modifiers. All GUIs mentioned in this review were written either by the Microsoft Visual Basic.net or a MATLAB GUI development tool called GUIDE. In addition, all GUIs were verified and tested using measurements to ensure their accuracies were up to clinical acceptable levels for implementations.
文摘This paper deals with a problem of application generation together with their Graphic User Interface （GUI）. Particularly, the source code generator based on dynamic frames was improved for more effective specification of GUI. It＇s too demanding for the developers to have specification of the application that contain all physical coordinates and other details of buttons and other GUI elements. The developed solution for this problem is based on post-processing of generated source code using iterators for specifying coordinates and other values of graphic elements. The paper includes two examples of generating web applications and their GUI.
文摘In this paper, the design of a Graphical User Interface for CAN data frame monitoring is presented. The GUI has been developed in the Qt Creator IDE. A touch screen for visualization and control is used, which in turn is controlled by a development board with a SoC Cyclone V, through which a Linux operating system is executed.
文摘This paper aims at the presentation of an interface to simulate cardiovascular respiratory system. The authors are interested in the resolution of optimal control problem related to the performance of a 30 years old woman. The results show in the most case the determinant parameters of cardiovascular respiratory system reach the equilibrium value due to its controls that is heart rate and alveolar ventilation.
文摘The user-computer interface for color selection is of great significance for the use of colors in computer graphics, particularly in some fields where the used colors have to be selected carefully. This paper discusses what factors have to be considered to design an effective user interface for color selec- tion. It also presents a method which shows how to represent 3D color spaces according to the psychol- ogy of color perception. Two examples of user interface for color selection are given. One is based on the CLELUV uniform color space, the other is based on RGB-rotated color model.
文摘Python作为一种跨平台的计算机程序设计语言,凭借其方便的安装和简洁的语法,被广泛应用于各个领域,且它的Tkinter工具包在可视化界面程序开发中也广受编程者的青睐。利用Python语言和Tkinter工具包设计身份证真伪验证系统,并结合SQLite数据库进行数据操作,理解图形用户界面(Graphical User Interface,GUI)编程的逻辑思路,将代码以可视化的形式呈现,不受编程环境影响,从而实现人机交互。
文摘This paper introduces a new version of the open-source educational software, LESM (Linear Elements Structure Model), developed in MATLAB for structural analysis of one-dimensional models such as frames, trusses, and grillages. The updated program includes dynamic analysis, which incorporates inertial and damping effects, time-dependent load conditions, and a transient solver with multiple time integration schemes. The software assumes small displacements and linear-elastic material behavior. The paper briefly explains the theoretical basis for these developments and the reorganization of the source code using Object-Oriented Programming (OOP). The updated Graphical User Interface (GUI) allows interactive use of dynamic analysis features and displays new results such as animations, envelope diagrams of internal forces, phase portraits, and the response of degrees-of-freedom in time and frequency domain. The new version was used in a structural dynamics course, and new assignments were elaborated to improve students’ understanding of the subject.
