Winter wheat yield improvement by genetic gain across different provinces in China

The replacement of winter wheat varieties has contributed significantly to yield improvement worldwide,with remarkable progress in China.Drawing on two sets of data,production yield from the National Bureau of Statistics of China and experimental yield from literature,this study aims to(1)illustrate the increasing patterns of production yield among different provinces from 1978 to 2018 in China,(2)explore the genetic gain in yield and yield relevant traits through the variety replacement based on experimental yield from 1937 to 2016 in China,and(3)compare the yield gap between experimental yield and production yield.The results show that both the production and experimental yields significantly increased along with the variety replacement.The national annual yield increase ratio for the production yield was 1.67%from 1978 to 2018,varying from 0.96%in Sichuan Province to 2.78%in Hebei Province;such ratio for the experimental yield was 1.13%from 1937 to 2016.The yield gap between experimental and production yields decreased from the 1970s to the 2010s.This study reveals significant increases in some yield components consequent to variety replacement,including thousand-grain weight,kernel number per spike,and grain number per square meter;however,no change is shown in spike number per square meter.The biomass and harvest index consistently and significantly increased,whereas the plant height decreased significantly.

Preweaning period is a critical window for rumen microbial regulation of average daily gain in Holstein heifer calves

Background Rumen bacterial groups can affect growth performance,such as average daily gain(ADG),feed intake,and efficiency.The study aimed to investigate the inter-relationship of rumen bacterial composition,rumen fermentation indicators,serum indicators,and growth performance of Holstein heifer calves with different ADG.Twelve calves were chosen from a trail with 60 calves and divided into higher ADG(HADG,high pre-and post-weaning ADG,n=6)and lower ADG(LADG,low pre-and post-weaning ADG,n=6)groups to investigate differences in bacterial composition and functions and host phenotype.Results During the preweaning period,the relative abundances of propionate producers,including g_norank_f_Butyricicoccaceae,g_Pyramidobacter,and g_norank_f_norank_o_Clostridia_vadin BB60_group,were higher in HADG calves(LDA>2,P<0.05).Enrichment of these bacteria resulted in increased levels of propionate,a gluconeogenic precursor,in preweaning HADG calves(adjusted P<0.05),which consequently raised serum glucose concentrations(adjusted P<0.05).In contrast,the relative abundances of rumen bacteria in post-weaning HADG calves did not exert this effect.Moreover,no significant differences were observed in rumen fermentation parameters and serum indices between the two groups.Conclusions The findings of this study revealed that the preweaning period is the window of opportunity for rumen bacteria to regulate the ADG of calves.

Domestic Oral Care Brands Are Regaining Lost Ground

Domestic toothpastes forced to retreat The stories of domestic toothpastes are not as good as soda water. Due to the strength of domestic drinks in recent years, soda water are regaining power. Two Cola brands made other drinks lose grounds in the market. Nowadays, the latest domestic drinks keep emerging and the competition in the market is getting fierce.

Topological laser on square lattice with gain–loss-induced higher-order corner modes

We investigate the higher-order topological laser in the two-dimensional(2D) coupled-cavity array. By adding staggered on-site gain and loss to the 2D Hermitian array with a trivial phase, the system will emerge degenerate topological corner modes, which are protected by bulk band gap. For such a non-Hermitian model, by adjusting the parameters of the system and introducing the pumping into the cavity at the corner, a single-mode lasing with topological protection emerges.Furthermore, single-mode lasing exists over a wide range of pumping strengths. No matter where the cavity is initially stimulated, after enough time evolution, all the cavities belonging to the topological corner mode can emit a stable laser.

A Stroke-Limitation AMD Control System with Variable Gain and Limited Area for High-Rise Buildings

Collisions between a moving mass and an anti-collision device increase structural responses and threaten structural safety.An active mass damper(AMD)with stroke limitations is often used to avoid collisions.However,a strokelimited AMD control system with a fixed limited area shortens the available AMD stroke and leads to significant control power.To solve this problem,the design approach with variable gain and limited area(VGLA)is proposed in this study.First,the boundary of variable-limited areas is calculated based on the real-time status of the moving mass.The variable gain(VG)expression at the variable limited area is deduced by considering the saturation of AMD stroke.Then,numerical simulations of a stroke-limited AMD control system with VGLA are conducted on a high-rise building structure.These numerical simulations show that the proposed approach has superior strokelimitation performance compared with a stroke-limited AMD control system with a fixed limited area.Finally,the proposed approach is validated through experiments on a four-story steel frame.

基于GAIN-LSTM网络的雷达PRI序列还原及识别方法

开展脉冲重复间隔(Pulse Repetition Interval,PRI)模式识别工作是电子支援系统的一项重要任务。现代复杂电磁环境下,受雷达辐射源部署和接收设备本身影响,雷达脉冲丢失率极高,导致分选后PRI序列调制规律被破坏,现有的PRI模式识别方法准确率不足。针对上述问题,从PRI序列还原角度出发,并结合PRI序列本质是时序序列的特点,提出GAIN-LSTM(Generative Adversarial Imputation Nets and Long Short Term Memory)网络架构,其先对丢失脉冲位置进行补全操作,恢复PRI调制规律,然后对还原后PRI序列进行调制模式识别。仿真结果表明,提出的GAIN-LSTM网络架构在脉冲丢失率70%时仍保持95%的正确识别率。

ANovel Non-Isolated Cubic DC-DC Converter with High Voltage Gain for Renewable Energy Power Generation System

In recent years,switched inductor(SL)technology,switched capacitor(SC)technology,and switched inductor-capacitor(SL-SC)technology have been widely applied to optimize and improve DC-DC boost converters,which can effectively enhance voltage gain and reduce device stress.To address the issue of low output voltage in current renewable energy power generation systems,this study proposes a novel non-isolated cubic high-gain DC-DC converter based on the traditional quadratic DC-DC boost converter by incorporating a SC and a SL-SC unit.Firstly,the proposed converter’s details are elaborated,including its topology structure,operating mode,voltage gain,device stress,and power loss.Subsequently,a comparative analysis is conducted on the voltage gain and device stress between the proposed converter and other high-gain converters.Then,a closed-loop simulation system is constructed to obtain simulation waveforms of various devices and explore the dynamic performance.Finally,an experimental prototype is built,experimental waveforms are obtained,and the experimental dynamic performance and conversion efficiency are analyzed.The theoretical analysis’s correctness is verified through simulation and experimental results.The proposed converter has advantages such as high voltage gain,low device stress,high conversion efficiency,simple control,and wide input voltage range,achieving a good balance between voltage gain,device stress,and power loss.The proposed converter is well-suited for renewable energy systems and holds theoretical significance and practical value in renewable energy applications.It provides an effective solution to the issue of low output voltage in renewable energy power generation systems.

Design of a Low Power Low-Noise Amplifier with Improved Gain/Noise Ratio

This work details the development of a broad-spectrum LNA (Low Noise Amplifier) circuit using a 65 nm CMOS technology. The design incorporates an inductive degeneracy circuit, employing a theoretical approach to enhance gain, minimize noise levels, and uphold low power consumption. The progression includes a shift to a cascode structure to further refine LNA parameters. Ultimately, with a 1.8 V bias, the achieved performance showcases a gain-to-noise figure ratio of 16 dB/0.5 dB, an IIP3 linearity at 5.1 dBm, and a power consumption of 3 mW. This architecture is adept at operating across a wide frequency band spanning from 0.5 GHz to 6 GHz, rendering it applicable in diverse RF scenarios.

Joint Beamforming Design for Dual-Functional Radar-Communication Systems Under Beampattern Gain Constraints

The joint beamforming design challenge for dual-functional radar-communication systems is addressed in this paper.The base station in these systems is tasked with simultaneously sending shared signals for both multi-user communication and target sensing.The primary objective is to maximize the sum rate of multi-user communication,while also ensuring sufficient beampattern gain at particular angles that are of interest for sensing,all within the constraints of the transmit power budget.To tackle this complex non-convex problem,an effective algorithm that iteratively optimizes the joint beamformers is developed.This algorithm leverages the techniques of fractional programming and semidefinite relaxation to achieve its goals.The numerical results confirm the effectiveness of the proposed algorithm.

Analysis of the Effects of Maternal Body Mass Index and Gestational Weight Gain on Maternal and Neonatal Outcomes in Twin Pregnancy

Objective:To investigate the effects of maternal body mass index(BMI)and gestational weight gain on maternal and neonatal outcomes in twin pregnancies.Methods:Five hundred cases of twin pregnancies were divided into a low body weight group(68 cases),a normal weight group(355 cases),an overweight group(65 cases),and an obesity group(12 cases)according to the World Health Organization(WHO)Body Mass Index(BMI)classification guidelines Results:Comparison of weight gain during different pregnancies revealed that pregnant women were mainly of low weight and average weight.The higher the BMI before pregnancy,the higher the incidence of excessive weight gain during pregnancy.The incidences of gestational diabetes mellitus(GDM)and premature rupture of membranes in women with low weight gain were significantly higher than those in women with average weight gain and high weight gain(P<0.05).The incidences of gestational hypertension,preeclampsia,and anemia in women with high weight gain were significantly higher than those in women with low weight gain and average weight gain(P<0.05).The incidence of neonatal birth weight,fetal distress,and macrosomia in the high weight gain group was significantly higher than those in the low weight gain and average weight gain groups(P<0.05).The birth weight of newborns in low-weight gain mothers was significantly lower than that of normal-weight gain mothers(P<0.05).Conclusion:Poor maternal and infant outcomes were common in women with insufficient or excessive weight gain during pregnancy.Therefore,for women with twin pregnancies,weight management is crucial to ensure maternal and infant health.

Hierarchical Media Ethics in the Digital Age: An Analysis of the “Primary School Student Lost Homework in Paris” Incident

In the digital age,traditional media ethics norms lack sufficient explanatory power and binding force in practice.This paper uses the“Primary School Student Lost Homework in Paris”incident as a case study to explore the ethical controversies surrounding the dissemination of this event.By adopting a hierarchical media ethics perspective,the paper dynamically examines the ethical conduct of various communicators,elucidates the ethical responsibilities of each party involved,and reveals the complexity of communication ethics in the digital age.

Lost City低温热液场——一种新的海底热液活动类型

综述了新近发现的海底热液活动的新类型——Lost City低温热液场。该低温热液场坐落于距洋中脊15km远的轴外洋底上，下伏的橄榄石经蛇纹石化反应所产生的热能是驱动该热液场的热源。低温热液场烟囱结构的矿物组分主要为方解石、文石和水镁石，热液流的温度为40～75℃．并以高pH值以及高氢、高甲烷含量为特征。Lost City低温热液场，为研究者们了解早期地球热液过程与它们所支撑的生命系统关系，探讨蛇纹石化、碳酸盐沉淀、微生物活动之间关系提供了天然实验室。

Microstructure and mechanical properties of Mg-Gd-Y-Zr alloy cast by metal mould and lost foam casting

The microstructure and mechanical properties of Mg-10.1Gd-3.74Y-0.25Zr （mass fraction, %） alloy （GW104 alloy） cast by metal mould casting （MMC） and lost foam casting （LFC） were evaluated, respectively. It is revealed that different forming modes do not influence the phase composition of as-cast alloy. In the as-cast specimens, the microstructures are similar and composed of α-Mg solid solution, eutectic compound of α-Mg＋Mg 24 （Gd, Y） 5 and cuboid-shaped Mg 5 （Gd, Y） phase; whereas the average grain size of the alloy produced by metal mould casting is smaller than that by lost foam casting. The eutectic compound of the alloy is completely dissolved after solution treatment at 525 ℃for 6 h, while the Mg 5 （Gd, Y） phase still exists after solution treatment. After peak-ageing, the lost foam cast alloy exhibits the maximum ultimate tensile strength of 285 MPa, and metal mould cast specimen 325 MPa at room temperature, while the tensile yield strengths of them are comparable. It can be concluded that GW104 alloy cast by lost foam casting possesses similar microstructure and evidently lower mechanical strength compared with metal mould cast alloy, due to slow solidification rate and proneness to form shrinkage porosities during lost foam casting process.

GAINS中重力传感器信息的扰动改正

重力辅助惯性导航系统GAINS(Gravity Aided Inertial Navigation System)是利用地球物理特征信息──重力来完成水下运动载体的辅助惯性导航与定位。为实现重力匹配以校正惯性导航随时间累积的误差,首先必须对重力传感器输出信息进行扰动改正。分析了水下运动状态下重力传感器受到的各种重力扰动,如垂直扰动加速度、水平扰动加速度以及厄特弗斯效应影响所产生的原因,研究了扰动误差模型与INS导航精度之间的关系,并通过计算,提出了可直接以INS输出数据而无需其它外部有源导航信息进行扰动分离的方法。

A Ka Broadband High Gain Monolithic LNA with a Noise Figure of 2dB

A four-stage monolithic microwave integrated circuits （MMIC） low noise amplifier （LNA） operating from 23 to 36GHz is reported using commercially available 0.15μm PHEMT technology. The LNA is self-biased. To achieve a low noise characteristic, careful optimizations of gate width are performed to reduce gate resistance. Absorption circuits and an elaborate bias structure with a resistor-capacitor network are employed to improve stability. Multiple resonance points and negative feedback technologies are used to widen the bandwidth. Measurements show a noise figure （NF） of less than 2.0dB,and the lowest NF is only 1.6dB at a frequency of 31GHz. In the whole operation band,the LNA has a gain of higher than 26dB,and an input return loss and output return loss of more than 11 and 13dB,respectively. The output power at ldB compression gain of 36GHz is about 14dBm. The chip area is 2.4mm ×1mm.

外语教学中的非词语化现象研究——以常用词gain,run为例

非词语化是大部分常用词汇的主要意义趋向和行为特征,是搭配词之间在使用中意义共享的必然结果。本文基于语料库,以常用词gain,run为例,研究外语教学中的非词语化现象及其对词汇产出的影响,发现常用词的非词语化用法是词汇意义变化的趋势,但也是中国英语学习者的难点所在。非词语化用法普遍存在难以产出的现象。

Approximate Well Width and Optical Gain Formulas of 1 .555μm In_(1-x-y )Ga_y Al_x As Compressively Strained Quantum- Well Laser

Using Harrison's model and anisotropic parabolic approximation,the band structure of In1- x- y Gay Alx As compressively strained quantum wells is calculated.To design lasers with1.55μm wavelength,it is necessary to an- alyze the well width,differential gain,transparency carrier density and the characteristic gain for an arbitrary com- position.Some useful empirical formulas are also presented.

Gain and Noise Properties of Bidirectional EDFAs

The rate equation model is setup for the signal gain, pump absorption and output noise spectrum of bidirectional EDFA (Bi EDFA) including numbers of signals, pumps of arbitrary direction, amplified spontaneous emission (ASE) and inherent loss. The influence of erbium doped fiber length, input signal power, pump style and pump power on the gain characteristics of Bi EDFA is analyzed. Forward and backward noise figure for different pump style versus bidirectional input signal power is investigated.

Single-Stage Wide-Range CMOS VGA with Temperature Compensation and Linear-in-dB Gain Control

A novel wide-range CMOS variable gain amplifier （VGA） topology is presented. The proposed VGA is composed of a variable transconductor and a novel variable output resistor and can offer a high gain variation range of 80dB while using a single variable-gain stage. Temperature-compensation and decibel-linear gain characteristic are achieved by using a control circuit that provides a gain error lower than ±1.5dB over the full temperature and gain ranges. Realized in 0.25μm CMOS technology, a prototype of the proposed VGA provides a total gain range of 64.5dB with 55.6dB-linear range,a P-1dB varying from - 17.5 to 11.5dBm,and a 3dB-bandwith varying from 65 to 860MHz while dissipating 16.5mW from a 2.5V supply voltage.