Response characteristics of gas pressure under simultaneous static and dynamic load:Implication for coal and gas outburst mechanism

Coal and gas outbursts are dynamic disasters in which a large mass of gas and coal suddenly emerges in a mining space within a split second.The interaction between the gas pressure and stress environment is one of the key factors that induce coal and gas outbursts.In this study,first,the coupling relationship between the gas pressure in the coal body ahead of the working face and the dynamic load was investigated using experimental observations,numerical simulations,and mine-site investigations.It was observed that the impact rate of the dynamic load on the gas-bearing coal can significantly change the gas pressure.The faster the impact rate,the speedier the increase in gas pressure.Moreover,the gas pressure rise was faster closer to the impact interface.Subsequently,based on engineering background,we proposed three models of stress and gas pressure distribution in the coal body ahead of the working face:static load,stress disturbance,and dynamic load conditions.Finally,the gas pressure distribution and outburst mechanism were investigated.The high concentration of gas pressure appearing at the coal body ahead of the working face was caused by the dynamic load.The gas pressure first increased gradually to a peak value and then decreased with increasing distance from the working face.The increase in gas pressure plays a major role in outburst initiation by resulting in the ability to more easily reach the critical points needed for outburst initiation.Moreover,the stronger the dynamic load,the greater the outburst initiation risk.The results of this study provide practical guidance for the early warning and prevention of coal and gas outbursts.

Experimental investigations on effects of gas pressure on mechanical behaviors and failure characteristic of coals

The mechanical behavior of coal is the key factor affecting underground coal mining and coalbed methane extraction.In this study,triaxial compression and seepage tests were carried out on coal at different gas pressures.The mechanical properties and failure process of coal were studied,as well as the acoustic emission(AE)and strain energy.The influence of gas pressure on the mechanical parameters of this coal was analyzed.Based on the conventional energy calculation formula,the pore pressure was introduced through the effective stress formula,and each energy component of coal containing gas was refined innovatively.The contribution of gas pressure to the total energy input and dissipation during loading was quantitatively described.Finally,the influence of gas pressure on coal strength was theo-retically analyzed from the perspectives of MohreCoulomb criterion and fracture mechanics.The results show that the total absorbed energy comprises the absorbed energy in the axial pressure direction(positive)and in the confining pressure direction(negative),as well as that induced by the pore pressure(initially negative and then positive).The absorbed energy in the axial pressure direction accounts for the main proportion of the total energy absorbed by coal.The quiet period of AE in the initial stage shortens,and AE activity increases during the pre-peak stage under high gas pressure.The fractal characteristics of AE in three stages are studied using the correlation dimension.The AE process has different forms of self-similarity in various deformation stages.

Self-absorption effects of laser-induced breakdown spectroscopy under different gases and gas pressures

The self-absorption effect is one of the main factors affecting the quantitative analysis accuracy of laser-induced breakdown spectroscopy.In this paper,the self-absorption effects of laserinduced 7050 Al alloy plasma under different pressures in air,Ar,and N2have been studied.Compared with air and N2,Ar significantly enhances the spectral signal.Furthermore,the spectral self-absorption coefficient is calculated to quantify the degree of self-absorption,and the influences of gas species and gas pressure on self-absorption are analyzed.In addition,it is found that the spectral intensity fluctuates with the change of pressure of three gases.It can also be seen that the fluctuation of spectral intensity with pressure is eliminated after correcting,which indicates that the self-absorption leads to the fluctuation of spectral intensity under different pressures.The analysis shows that the evolution of optical thin spectral lines with pressure in different gases is mainly determined by the gas properties and the competition between plasma confinement and Rayleigh–Taylor instability.

Revaluating coal permeability-gas pressure relation under various gas pressure differential conditions

Identifying changes in coal permeability with gas pressure and accurately codifying mean efective stresses in laboratory samples are crucial in predicting gas-fow behavior in coal reservoirs. Traditionally, coal permeability to gas is assessed using the steady-state method, where the equivalent gas pressure in the coal is indexed to the average of upstream and downstream pressures of the coal, while ignoring the nonlinear gas pressure gradient along the gas fow path. For the fow of a compressible gas, the traditional method consistently underestimates the length/volume-averaged pressure and overestimates mean efective stress. The higher the pressure diferential within the sample, the greater the error between the true mean pressure for a compressible fuid and that assumed as the average between upstream and downstream pressures under typical reservoir conditions. A correction coefcient for the compressible fuid pressure asymptotes to approximately 1.3%, representing that the error in mean pressure and efective stress can be on the order of approximately 30%, particularly for highly pressure-sensitive permeabilities and compressibilities, further amplifying errors in evaluated reservoir properties. We utilized this volume-averaged pressure and efective stress to correct permeability and compressibility data reported in the literature. Both the corrected initial permeability and the corrected pore compressibility were found to be smaller than the uncorrected values, due to the underestimation of the true mean fuid pressure, resulting in an overestimation of reservoir permeability if not corrected. The correction coefcient for the initial permeability ranges from 0.6 to 0.1 (reservoir values are only approximately 40% to 90% of laboratory values), while the correction coefcient for pore compressibility remains at approximately 0.75 (reservoir values are only approximately 25% of laboratory value). Errors between the uncorrected and corrected parameters are quantifed under various factors, such as confning pressure, gas sorption, and temperature. By analyzing the evolutions of the initial permeability and pore compressibility, the coupling mechanisms of mechanical compression, adsorption swelling, and thermal expansion on the pore structure of the coal can be interpreted. These fndings can provide insights that are useful for assessing the sensitivity of coal permeability to gas pressure as truly representative of reservoir conditions.

Experimental research into the effect of gas pressure,particle size and nozzle area on initial gas-release energy during gas desorption

Coal and gas outburst is a violent disaster driven by released energy from gas desorption.The initial expansion energy of released gas(IEERG)is a new method to predict coal and gas outburst.In this paper,an instrument for IEERG measurement was developed.Compared with previous setups,the new one which is equipped with three convergent nozzles and quick-release mechanism gets improved in data acquisition and gas sealing and releasing performance.To comprehensively know the effect of gas pressure,particle size,and nozzle area on IEERG,a series of experiments were carried out with this new setup.The variable control test results indicated that the gas pressure-IEERG curves remain the linear trend and the particle size-IEERG curves maintain the negative exponential trend for nozzle areas at 1.13,2.26,and3.39 mm2,respectively.The increase in nozzle area leads to deceases in value of IEERG and absolute value of slope of fitting curves in each test.In addition,the orthogonal experiment showed that the influence of gas pressure,nozzle area,and particle size on IEERG decreases in turn.Only gas pressure had a marked impact on IEERG.This work offers great importance in improving the accuracy of prediction of coal and gas outburst.

Influence of Argon Gas Pressure on the ZnO:Al Films Deposited on Flexible TPT Substrates at Room Temperature by Magnetron Sputtering

Aluminium doped ZnO thin films（ZnO︰Al） were deposited on transparent polymer substrates at room temperature by rf magnetron sputtering method from a ZnO target with Al2O3 of 2.0 wt%. Argon gas pressure varied from 0.5 Pa to 2.5 Pa with radio frequency power of 120 W. XRD results showed that all the ZnO︰Al films had a polycrystalline hexagonal structure and a （002） preferred orientation with the c-axis perpendicular to the substrate. The grain sizes of the films were 6.3-14.8 nm.SEM images indicated the ZnO︰Al film with low Argon gas pressure was denser and the deposition rate of the films depended strongly on the Argon gas pressure, increasing firstly and then decreasing with increasing the pressure. The highest deposition rate was 5.2 nm/min at 1 Pa. The optical transmittance of the ZnO︰Al films increased and the blue shift of the absorption edge appeared when the Argon gas pressure increased. The highest transmittance of obtained ZnO︰Al films at 2.5 Pa was about 85% in the visible region. The electrical properties of the films were worsened with the increase of the Argon gas power from 1 Pa to 2.5 Pa. The resistivity of obtained film at 1.0 Pa was 2.79×10-2 Ω·cm.

Effect of carrier gas pressure on vapor condensation and mass flow-rate in sonic nozzle

Non-equilibrium vapor condensation of moist gas through a sonic nozzle is a very complicated phenomenon and is related to the measurement accuracy of sonic nozzle.A gas-liquid two-phase model for the moist gas condensation flow was built and validated by moist nitrogen experiment of homogeneous nucleation through a transonic nozzle.The effects of carrier gas pressure on position and status of condensation onset in sonic nozzle were investigated in detail.The results show that condensation process is not easy to occur at lower carrier pressure and throat diameter.The main factors influencing condensation onset are boundary layer thickness,heat capacity of carrier gas and expansion rate.All of results can be used to further analyze the effect of condensation on mass flow-rate of sonic nozzle.

Effect of gas pressure on ion energy at substrate side of Ag target radio-frequency and very-high-frequency magnetron sputtering discharge

The effect of gas pressure on ion energy distribution at the substrate side of Ag target radio-frequency(RF)and very-high-frequency(VHF)magnetron sputtering discharge was investigated.At lower pressure,the evolution of maximum ion energy(E)with discharge voltage(V)varied with the excitation frequency,due to the joint contribution of the ion generation in the bulk plasma and the ion movement across the sheath related to the ion transit sheath timeτiand RF periodτRF.At higher pressure,the evolution of E–V relationships did not vary with the excitation frequency,due to the balance between the energy lost through collisions and the energy gained by acceleration in the electric field.Therefore,for RF and VHF magnetron discharge,lower gas pressure can have a clear influence on the E–V relationship.

Influence of Ground Stress on Coal Seam Gas Pressure and Gas Content

The influence of ground stress was quantitatively analyzed on coal seam gas pressure and gas content in this paper.Mining activities in coal mine can result in stress concentration in the coal(rock)body around the mining space,but porosity of the coal seam would not change too much.Therefore,gas pressure and gas content in the coal seam are slightly affected.Studies showed that the free gas was gradually transformed into adsorbed gas,and the gas adsorption volume was small,and then gas pressure increases roughly linearly when the porosity decreased because of stress influence.Additionaly,when porosity of coal seam reduced to 40%,the amount of adsorbed gas accounted for no more than 10%of coal seam gas content,and the increase of gas pressure did not exceed 15%of the original gas pressure.

Effects of gas pressure on plasma characteristics in dual frequency argon capacitive glow discharges at low pressure by a self-consistent fluid model

A self-consistent fluid model for dual radio frequency argon capacitive glow discharges at low pressure is established. Numerical results are obtained by using a finite difference method to solve the model numerically, and the results are analyzed to study the effect of gas pressure on the plasma characteristics. It shows that when the gas pressure increases from 0.3 Torr （1 Torr=1.33322102 Pa） to 1.5 Torr, the cycle-averaged plasma density and the ionization rate increase; the cycle-averaged ion current densities and ion energy densities on the electrodes electrode increase; the cycle-averaged electron temperature decreases. Also, the instantaneous electron density in the powered sheath region is presented and discussed. The cycle-averaged electric field has a complex behavior with the increasing of gas pressure, and its changes take place mainly in the two sheath regions. The cycle-averaged electron pressure heating, electron ohmic heating, electron heating, and electron energy loss are all influenced by the gas pressure. Two peaks of the electron heating appear in the sheath regions and the two peaks become larger and move to electrodes as the gas pressure increases.

Analysis of influence of RF power and buffer gas pressure on sensitivity of optically pumped cesium magnetometer

A further study is conducted on two factors which respectively influence the sensitivity of optically pumped cesium magnetometer （CsOPM）. The influence of radio frequency （RF） power and the buffer gas pressure on the sensitivity is theoretically analyzed, and some properties are predicted. Based on the established measurement system and the visible Zeeman spectrum, not only is the real influence of these factors studied, but also, under our experimental condition, optimum parameters based on the measured curves are ascertained. The properties of these measured curves match the theoretical result very well. Our research attempts to provide theory reference to help magnetometer designers determine optimum parameters under certain conditions.

Effects of direct current discharge on the spatial distribution of cylindrical inductively-coupled plasma at different gas pressures

Stable operations of single direct current （DC） discharge, single radio frequency （RF） discharge and DC ＋ RF hybrid discharge are achieved in a specially-designed DC enhanced inductively- coupled plasma （DCE-ICP） source. Their plasma characteristics, such as electron density, electron temperature and the electron density spatial distribution profiles are investigated and compared experimentally at different gas pressures. It is found that under the condition of single RF discharge, the electron density distribution profiles show a ＇convex＇ shape and ＇saddle＇ shape at gas pressures of 3 mTorr and 150 mTorr respectively. This result can be attributed to the transition of electron kinetics from nonlocal to local kinetics with an increase in gas pressure. Moreover, in the operation of DC q- RF hybrid discharge at different gas pressures, the DC discharge has different effects on plasma uniformity. The plasma uniformity can be improved by modulating DC power at a high pressure of 150 mTorr where local electron kinetics is dominant, whereas plasma uniformity deteriorates at a low pressure of 3 mTorr where nonlocal electron kinetics prevails. This phenomenon, as analyzed, is due to the obvious nonlinear enhancement effect of electron density at the chamber center, and the inherent radial distribution difference in the electron density with single RF discharge at different gas pressures.

Effect of rock joints on lined rock caverns subjected to high internal gaspressure

The storage of hydrogen gas in lined rock caverns(LRCs)may enable the implementation of the firstlarge-scale fossil-free steelmaking process in Sweden,but filling such storage causes joints in the rockmass to open,concentrating strains in the lining.The structural interaction between the LRC componentsmust be able to reduce the strain concentration in the sealing steel lining;however,this interaction iscomplex and difficult to predict with analytical methods.In this paper,the strain concentration in LRCsfrom the opening of rock joints is studied using finite element(FE)analyses,where the large-and small-scale deformation behaviors of the LRC are coupled.The model also includes concrete crack initiation anddevelopment with increasing gas pressure and rock joint width.The interaction between the jointed rockmass and the reinforced concrete,the sliding layer,and the steel lining is demonstrated.The results showthat the rock mass quality and the spacing of the rock joints have the greatest influence on the straindistributions in the steel lining.The largest effect of rock joints on the maximum strains in the steellining was observed for geological conditions of“good”quality rock masses.

Recovery of zinc from Zn-Al-Fe alloys by gas pressure filtration

The recovery of zinc from galvanizing dross and the removal of iron contained dross particles by gas pressure filtration were investigated using the model of Zn-Fe-Al alloys.The majority of molten zinc was separated after filtration,and the residue intercepted by the filter consisting mostly of dross particles.The effects of the pressure differential(p),separation temperature(T)and alloy composition on the zinc recovery and iron removal were investigated.At p=0.30 MPa and T=723 K,86.2 wt.%zinc was recovered from the Zn-4Al-2Fe alloy,and up to 99.9 wt.%of the iron was concentrated in the residue.Applying a higher pressure differential led to the improved filtration efficiency,and the desired separation temperature was about 723 K.The aluminum content in the Zn-Al-Fe alloy had little effect on separation efficiency,whereas increasing the iron content led to a decrease in the separation efficiency.Our findings demonstrate the potential of the gas pressure filtration method for the recovery of zinc from galvanizing dross.

Structural integrity evaluation of irradiated LEU targets for the production of molybdenum‑99 using thermo‑mechanical behavior simulation coupled with pressure of fission gas release calculation

Irradiated low-enriched uranium as target plates is used to produce,via neutron radiation and from the molybdenum-99 fission product,technetium-99m,which is a radio-element widely used for diagnosis in the field of nuclear medicine.The behavior of this type of target must be known to prevent eventual failures during radiation.The present study aims to assess,via prediction,the thermal–mechanical behavior,physical integrity,and geometric stability of targets under neutron radiation in a nuclear reactor.For this purpose,a numerical simulation using a three-dimensional finite element analysis model was performed to determine the thermal expansion and stress distribution in the target cladding.The neutronic calculation results,target material properties,and cooling parameters of the KAERI research group were used as inputs in our developed model.Thermally induced stress and deflection on the target were calculated using Ansys-Fluent codes,and the temperature profiles,as inputs of this calculation,were obtained from a CFD thermal–hydraulic model.The stress generated,induced by the pressure of fission gas release at the interface of the cladding target,was also estimated using the Redlich–Kwong equation of state.The results obtained using the bonded and unbonded target models considering the effect of the radiation heat combined with a fission gas release rate of approximately 3%show that the predicted thermal stress and deflection values satisfy the structural performance requirement and safety design.It can be presumed that the integrity of the target cladding is maintained under these conditions.

Measurement of transient neutral gas puff pressure in the NUDT＿IPPTx by a fast ionization gauge

A gas injector was designed for the 400 J/pulse prototype of the planar inductive pulsed plasma thruster（IPPT） developed by the National University of Defense Technology（NUDT_IPPTx）.As the gas puff distribution over the coil surface is critical to the NUDT_IPPTx functioning efficiently, a fast ionization gauge was developed to investigate the neutral gas pressure profiles to seek the critical time when the thruster is ignited. The gauge was calibrated for argon by using a capacitance manometer. Time-resolved pressure profiles have been acquired in the condition of the gas puff mass matching with the discharge energy and the drive coil parameters of the NUDT_IPPTx. It is demonstrated that the gas injector can supply a gas puff with a sufficiently steep（dp/dt？≈？770 kPa s-1） leading and trailing edge, and the gas puff can be compressed against the drive coil as expected. The critical ignition moment is considered to appear at some instant between 525 μs and 650 μs after the valve trigger.

Pressure dependent modulation instability in photonic crystal fiber filled with argon gas

By using the designed photonic crystal fiber filled with argon gas, the effect of gas pressure on modulation instability（MI） gain is analyzed in detail. The MI gain bandwidth increases gradually as the argon gas pressure rises from 1 P0 to 400 P0（P0 is one standard atmosphere）, while its gain amplitude slightly decreases. Moreover, the increase of the incident light power also results in the increase of MI gain bandwidth in the Stokes or anti-Stokes region when the incident power increases from 1 W to 200 W. Making use of the optimal parameters including the higher argon gas pressure（400 P0） and the incident light power（200 W）, we finally obtain a 100 nm broadband MI gain. These results indicate that controlling the MI gain characteristic by changing the argon gas pressure in PCF is an effective way when the incident light source is not easy to satisfy the requirement of practical application. This method of controlling MI gain can be used in optical communication and laser shaping.

An experimental study on microscopic characteristics of gas-bearing sediments under different gas reservoir pressures

Gas-bearing sediments are widely distributed in five continents all over the world.Most of the gases exist in the soil skeleton in the form of discrete large bubbles.The existence of gas-phase may increase or decrease the strength of the soil skeleton.So far,bubbles’structural morphology and evolution characteristics in soil skeleton lack research,and the influence of different gas reservoir pressures on bubbles are still unclear.The micro characteristics of bubbles in the same sediment sample were studied using an industrial CT scanning test system to solve these problems.Using the image processing software,the micro variation characteristics of gas-bearing sediments in gas reservoir pressure change are obtained.The results show that the number and volume of bubbles in different equivalent radius ranges will change regularly under different gas reservoir pressure.With the increase of gas reservoir pressure,the number and volume of tiny bubbles decrease.In contrast,the number and volume of large bubbles increase,and the gas content in different positions increases and occupies a dominant position,driving the reduction of pore water and soil skeleton movement.

Self-sealing of fractures in indurated claystones measured by water and gas flow

Self-sealing of fractures in the indurated Callovo-Oxfordian(COX)and Opalinus(OPA)claystones,which are considered as host rocks for disposal of radioactive waste,was investigated on artificially fractured samples.The samples were extracted from four lithological facies relatively rich in clay mineral,carbonate and quartz,respectively.The self-sealing of fractures was measured by fracture closure,water permeability variation,gas penetration,and recovery of gas-induced pathways.Most of the fractured samples exhibited a dramatic reduction inwater permeability to low levels that is close to that of intact rock,depending on their mineralogical composition,fracture intensity,confining stress,and load duration.The self-sealing capacity of the clay-rich samples is higher than that of the carbonate-rich and sandy ones.Significant effects of sample size and fracture intensity were identified.The sealed fractures become gas-tight for certain in-jection pressures.However,the measured gas breakthrough pressures are still lower than the confining stresses.The gas-induced pathways can recover when contacting water.These important findings imply that fractures in such indurated claystones can effectively recover to hinder water transport but allow gas release under relatively low pressures without compromising the rock integrity.

Intelligent production optimization method for a low pressure and low productivity shale gas well

Shale gas wells frequently suffer from liquid loading and insufficient formation pressure in the late stage of production.To address this issue,an intelligent production optimization method for low pressure and low productivity shale gas well is proposed.Based on the artificial intelligence algorithms,this method realizes automatic production and monitoring of gas well.The method can forecast the production performance of a single well by using the long short-term memory neural network and then guide gas well production accordingly,to fulfill liquid loading warning and automatic intermittent production.Combined with adjustable nozzle,the method can keep production and pressure of gas wells stable automatically,extend normal production time of shale gas wells,enhance automatic level of well sites,and reach the goal of refined production management by making production regime for each well.Field tests show that wells with production regime optimized by this method increased 15%in estimated ultimate reserve(EUR).Compared with the development mode of drainage after depletion recovery,this method is more economical and can increase and stabilize production effectively,so it has a bright application prospect.