As information acquisition terminals for artificial olfaction,chemiresistive gas sensors are often troubled by their cross-sensitivity,and reducing their cross-response to ambient gases has always been a difficult and...As information acquisition terminals for artificial olfaction,chemiresistive gas sensors are often troubled by their cross-sensitivity,and reducing their cross-response to ambient gases has always been a difficult and important point in the gas sensing area.Pattern recognition based on sensor array is the most conspicuous way to overcome the cross-sensitivity of gas sensors.It is crucial to choose an appropriate pattern recognition method for enhancing data analysis,reducing errors and improving system reliability,obtaining better classification or gas concentration prediction results.In this review,we analyze the sensing mechanism of crosssensitivity for chemiresistive gas sensors.We further examine the types,working principles,characteristics,and applicable gas detection range of pattern recognition algorithms utilized in gas-sensing arrays.Additionally,we report,summarize,and evaluate the outstanding and novel advancements in pattern recognition methods for gas identification.At the same time,this work showcases the recent advancements in utilizing these methods for gas identification,particularly within three crucial domains:ensuring food safety,monitoring the environment,and aiding in medical diagnosis.In conclusion,this study anticipates future research prospects by considering the existing landscape and challenges.It is hoped that this work will make a positive contribution towards mitigating cross-sensitivity in gas-sensitive devices and offer valuable insights for algorithm selection in gas recognition applications.展开更多
Significant challenges are posed by the limitations of gas sensing mechanisms for trace-level detection of ammonia(NH3).In this study,we propose to exploit single-atom catalytic activation and targeted adsorption prop...Significant challenges are posed by the limitations of gas sensing mechanisms for trace-level detection of ammonia(NH3).In this study,we propose to exploit single-atom catalytic activation and targeted adsorption properties to achieve highly sensitive and selective NH3 gas detection.Specifically,Ni singleatom active sites based on N,C coordination(Ni-N-C)were interfacially confined on the surface of two-dimensional(2D)MXene nanosheets(Ni-N-C/Ti_(3)C_(2)Tx),and a fully flexible gas sensor(MNPE-Ni-N-C/Ti_(3)C_(2)Tx)was integrated.The sensor demonstrates a remarkable response value to 5 ppm NH3(27.3%),excellent selectivity for NH3,and a low theoretical detection limit of 12.1 ppb.Simulation analysis by density functional calculation reveals that the Ni single-atom center with N,C coordination exhibits specific targeted adsorption properties for NH3.Additionally,its catalytic activation effect effectively reduces the Gibbs free energy of the sensing elemental reaction,while its electronic structure promotes the spill-over effect of reactive oxygen species at the gas-solid interface.The sensor has a dual-channel sensing mechanism of both chemical and electronic sensitization,which facilitates efficient electron transfer to the 2D MXene conductive network,resulting in the formation of the NH3 gas molecule sensing signal.Furthermore,the passivation of MXene edge defects by a conjugated hydrogen bond network enhances the long-term stability of MXene-based electrodes under high humidity conditions.This work achieves highly sensitive room-temperature NH3 gas detection based on the catalytic mechanism of Ni single-atom active center with N,C coordination,which provides a novel gas sensing mechanism for room-temperature trace gas detection research.展开更多
With the development of science and technology,the scale of industrial production continues to grow,and the types and quantities of gas raw materials used in industrial production and produced during the production pr...With the development of science and technology,the scale of industrial production continues to grow,and the types and quantities of gas raw materials used in industrial production and produced during the production process are also constantly increasing.These gases include flammable and explosive gases,and even contain toxic gases.Therefore,it is very important and necessary for gas sensors to detect and monitor these gases quickly and accurately.In recent years,a new two-dimensional material called MXene has attracted widespread attention in various applications.Their abundant surface functional groups and sites,excellent current conductivity,tunable surface chemistry,and outstanding stability make them promising for gas sensor applications.Since the birth of MXene materials,researchers have utilized the efficient and convenient solution etching preparation,high flexibility,and easily functionalize MXene with other materials to pre-pare composites for gas sensing.This has opened a new chapter in high-performance gas sensing materials and provided a new approach for advanced sensor research.However,previous reviews on MXene-based composite materials in gas sensing only focused on the performance of gas sensing,without systematically explaining the gas sensing mechanisms generated by different gases,as well as summarizing and predicting the advantages and disadvantages of MXene-based composite materials.This article reviews the latest progress in the application of MXene-based composite materials in gas sensing.Firstly,a brief summary was given of the commonly used methods for preparing gas sens-ing device structures,followed by an introduction to the key attributes of MXene related to gas sensing performance.This article focuses on the performance of MXene-based composite materials used for gas sensing,such as MXene/graphene,MXene/Metal oxide,MXene/Transition metal sulfides(TMDs),MXene/Metal-organic framework(MOF),MXene/Polymer.It summarizes the advantages and disadvantages of MXene com-posite materials with different composites and discusses the possible gas sensing mechanisms of MXene-based composite materials for different gases.Finally,future directions and inroads of MXenes-based composites in gas sensing are presented and discussed.展开更多
Highly sensitive gas sensors with remarkably low detection limits are attractive for diverse practical application fields including real-time environmental monitoring,exhaled breath diagnosis,and food freshness analys...Highly sensitive gas sensors with remarkably low detection limits are attractive for diverse practical application fields including real-time environmental monitoring,exhaled breath diagnosis,and food freshness analysis.Among various chemiresistive sensing materials,noble metal-decorated semiconducting metal oxides(SMOs)have currently aroused extensive attention by virtue of the unique electronic and catalytic properties of noble metals.This review highlights the research progress on the designs and applications of different noble metal-decorated SMOs with diverse nanostructures(e.g.,nanoparticles,nanowires,nanorods,nanosheets,nanoflowers,and microspheres)for high-performance gas sensors with higher response,faster response/recovery speed,lower operating temperature,and ultra-low detection limits.The key topics include Pt,Pd,Au,other noble metals(e.g.,Ag,Ru,and Rh.),and bimetals-decorated SMOs containing ZnO,SnO_(2),WO_(3),other SMOs(e.g.,In_(2)O_(3),Fe_(2)O_(3),and CuO),and heterostructured SMOs.In addition to conventional devices,the innovative applications like photo-assisted room temperature gas sensors and mechanically flexible smart wearable devices are also discussed.Moreover,the relevant mechanisms for the sensing performance improvement caused by noble metal decoration,including the electronic sensitization effect and the chemical sensitization effect,have also been summarized in detail.Finally,major challenges and future perspectives towards noble metal-decorated SMOs-based chemiresistive gas sensors are proposed.展开更多
Atomic layer deposition(ALD) is a versatile technique to deposit metals and metal oxide sensing materials at the atomic scale to achieve improved sensor functions. This article reviews metals and metal oxide semicondu...Atomic layer deposition(ALD) is a versatile technique to deposit metals and metal oxide sensing materials at the atomic scale to achieve improved sensor functions. This article reviews metals and metal oxide semiconductor(MOS) heterostructures for gas sensing applications in which at least one of the preparation steps is carried out by ALD. In particular, three types of MOS-based heterostructures synthesized by ALD are discussed, including ALD of metal catalysts on MOS, ALD of metal oxides on MOS and MOS core–shell(C–S) heterostructures.The gas sensing performances of these heterostructures are carefully analyzed and discussed.Finally, the further developments required and the challenges faced by ALD for the synthesis of MOS gas sensing materials are discussed.展开更多
A flower-like SnO_(2)–SnO/porous Ga N(FSS/PGaN) heterojunction was fabricated for the first time via a facile spraying process, and the whole process also involved hydrothermal preparation of FSS and electrochemical ...A flower-like SnO_(2)–SnO/porous Ga N(FSS/PGaN) heterojunction was fabricated for the first time via a facile spraying process, and the whole process also involved hydrothermal preparation of FSS and electrochemical wet etching of GaN,and SnO_(2)–SnO composites with p–n junctions were loaded onto PGaN surface directly applied to H_(2)S sensor. Meanwhile,the excellent transport capability of heterojunction between FSS and PGaN facilitates electron transfer, that is, a response time as short as 65 s and a release time up to 27 s can be achieved merely at 150℃ under 50 ppm H_(2)S concentration, which has laid a reasonable theoretical and experimental foundation for the subsequent PGaN-based heterojunction gas sensor.The lowering working temperature and high sensitivity(23.5 at 200 ppm H2S) are attributed to the structure of PGaN itself and the heterojunction between SnO_(2)–SnO and PGaN. In addition, the as-obtained sensor showed ultra-high test stability.The simple design strategy of FSS/PGaN-based H_(2)S sensor highlights its potential in various applications.展开更多
A new silicon beam resonator design for a novel gas sensor based on simultaneous conductivity and mass change measurement is investigated. High selectivity and sensitivity in gas detection can be obtained by measuring...A new silicon beam resonator design for a novel gas sensor based on simultaneous conductivity and mass change measurement is investigated. High selectivity and sensitivity in gas detection can be obtained by measuring the charge-to-mass ratio of gas molecules. Structures of silicon beam resonators are designed, simulated, and optimized. This gas sensor is fabricated using sacrificial layer microelectronmechanical system technology, and the resonant frequency of the microbeam is measured.展开更多
Three-dimensional (3D) hierarchical Co3O4 microcrystal with radial dendritic morphologies was prepared through hydrothermal reactions followed by subsequent annealing treatment. Structural and morphological characte...Three-dimensional (3D) hierarchical Co3O4 microcrystal with radial dendritic morphologies was prepared through hydrothermal reactions followed by subsequent annealing treatment. Structural and morphological characterizations were performed by X-ray diffraction, scan-ning electron microscopy and transmission electron microscopy. The gas sensing properties of the as-obtained microcrystal were investigated at 110 oC, which revealed that the 3D hierarchical porous Co3O4 microcrystal exhibited high sensitivity to ammonia, as well as a short response time of 10 s. The response characteristic indicates that the sensor has a good stability and reversibility. Detections of toxic and flammable gases, such as ethanol, acetone and benzene were also carried out at a relative low temperature. The results indicate that such hierarchical Co3O4 microcrystal would be a potential material in the field of gas sensing.展开更多
In order to simplify the fabrication process,distribute the temperature uniformly and reduce the power consumption of the micro-hotplate(MHP) gas sensor,a planar-type gas sensor based on SnO2 thin film with suspende...In order to simplify the fabrication process,distribute the temperature uniformly and reduce the power consumption of the micro-hotplate(MHP) gas sensor,a planar-type gas sensor based on SnO2 thin film with suspended structure is designed through a MEMS process.Steady-state thermal analysis of the gas sensor and the closed membrane type sensor where the membrane overlaps the Si substrate is carried out with the finite element model,and it is shown that the suspended planar-type gas sensor has a more homogeneous temperature distribution and a lower power consumption.When the maximum temperature on the sensor reaches 383℃,the power consumption is only 7 mW,and the temperature gradient across the thin film is less than 14℃.To overcome the fragility of the suspended beams,a novel fabrication process in which the deposition of the gas sensing film occurs prior to the formation of suspended beams is proposed.The back side of the Si substrate is etched through deep reactive ion etching(DRIE) to avoid chemical pollution of the front side.The fabrication steps in which only four masks are used for the photolithography are described in detail.The Fe doped SnO2 thin film synthesized by sol-gel spin-coating is used as the gas sensing element.The device is tested on hydrogen and exhibits satisfactory sensing performance.The sensitivity increases with the rise of the concentration from 50×10-6 to 2000×10-6,and reaches about 30 at 2000×10-6.展开更多
In-system programmable devices are products that combined modern electronic techniques and semiconductor techniques.They are indispensable devices in designing modern circuits and systems.This paper presents two pract...In-system programmable devices are products that combined modern electronic techniques and semiconductor techniques.They are indispensable devices in designing modern circuits and systems.This paper presents two practical circuits designed with programmable devices and its design method.By introducing programmable devices into gas sensor circuits,we can further improve system reliability,stability,sensitivity and integration degree,and enhance flexibility of system design.展开更多
SnO2 nanofibers were synthesized by electrospinning and modified with Co3O4 via impregnation in this work. Chemical composition and morphology of the nanofibers were system- atically characterized, and their gas sensi...SnO2 nanofibers were synthesized by electrospinning and modified with Co3O4 via impregnation in this work. Chemical composition and morphology of the nanofibers were system- atically characterized, and their gas sensing properties were investigated. Results showed that Co3O4 modification significantly enhanced the sensing performance of SnO2 nanofibers to ethanol gas. For a sample with 1.2 mol% Co3O4, the response to 100 ppm ethanol was 38.0 at 300 ℃, about 6.7 times larger than that of SnO2 nanofibers. In addition, the response/recovery time was also greatly reduced. A power-law dependence of the sensor response on the ethanol concentration as well as excellent ethanol selectivity was observed for the Co3O4/SnO2 sensor. The enhanced ethanol sensing performance may be attributed to the formation of p-n heterojunctions between the two oxides.展开更多
Room-temperature gas sensors have aroused great attention in current gas sensor technology because of deemed demand of cheap,low power consumption and portable sensors for rapidly growing Internet of things applicatio...Room-temperature gas sensors have aroused great attention in current gas sensor technology because of deemed demand of cheap,low power consumption and portable sensors for rapidly growing Internet of things applications.As an important approach,light illumination has been exploited for room-temperature operation with improving gas sensor's attributes including sensitivity,speed and selectivity.This review provides an overview of the utilization of photoactivated nanomaterials in gas sensing field.First,recent advances in gas sensing of some exciting different nanostructures and hybrids of metal oxide semiconductors under light illumination are highlighted.Later,excellent gas sensing performance of emerging two-dimensional materialsbased sensors under light illumination is discussed in details with proposed gas sensing mechanism.Originated impressive features from the interaction of photons with sensing materials are elucidated in the context of modulating sensing characteristics.Finally,the review concludes with key and constructive insights into current and future perspectives in the light-activated nanomaterials for optoelectronic gas sensor applications.展开更多
Nitrogen dioxide(NO2),a hazardous gas with acidic nature,is continuously being liberated in the atmosphere due to human activity.The NO2 sensors based on traditional materials have limitations of high-temperature requ...Nitrogen dioxide(NO2),a hazardous gas with acidic nature,is continuously being liberated in the atmosphere due to human activity.The NO2 sensors based on traditional materials have limitations of high-temperature requirements,slow recovery,and performance degradation under harsh environmental conditions.These limitations of traditional materials are forcing the scientific community to discover future alternative NO2 sensitive materials.Molybdenum disulfide(MoS2)has emerged as a potential candidate for developing next-generation NO2 gas sensors.MoS2 has a large surface area for NO2 molecules adsorption with controllable morphologies,facile integration with other materials and compatibility with internet of things(IoT)devices.The aim of this review is to provide a detailed overview of the fabrication of MoS2 chemiresistance sensors in terms of devices(resistor and transistor),layer thickness,morphology control,defect tailoring,heterostructure,metal nanoparticle doping,and through light illumination.Moreover,the experimental and theoretical aspects used in designing MoS2-based NO2 sensors are also discussed extensively.Finally,the review concludes the challenges and future perspectives to further enhance the gas-sensing performance of MoS2.Understanding and addressing these issues are expected to yield the development of highly reliable and industry standard chemiresistance NO2 gas sensors for environmental monitoring.展开更多
With the rapid development of the Internet of Things,there is a great demand for portable gas sensors.Metal oxide semiconductors(MOS)are one of the most traditional and well-studied gas sensing materials and have been...With the rapid development of the Internet of Things,there is a great demand for portable gas sensors.Metal oxide semiconductors(MOS)are one of the most traditional and well-studied gas sensing materials and have been widely used to prepare various commercial gas sensors.However,it is limited by high operating temperature.The current research works are directed towards fabricating high-performance flexible room-temperature(FRT)gas sensors,which are effective in simplifying the structure of MOS-based sensors,reducing power consumption,and expanding the application of portable devices.This article presents the recent research progress of MOS-based FRT gas sensors in terms of sensing mechanism,performance,flexibility characteristics,and applications.This review comprehensively summarizes and discusses five types of MOS-based FRT gas sensors,including pristine MOS,noble metal nanoparticles modified MOS,organic polymers modified MOS,carbon-based materials(carbon nanotubes and graphene derivatives)modified MOS,and two-dimensional transition metal dichalcogenides materials modified MOS.The effect of light-illuminated to improve gas sensing performance is further discussed.Furthermore,the applications and future perspectives of FRT gas sensors are also discussed.展开更多
Real-time rapid detection of toxic gases at room temperature is particularly important for public health and environmental monitoring.Gas sensors based on conventional bulk materials often suffer from their poor surfa...Real-time rapid detection of toxic gases at room temperature is particularly important for public health and environmental monitoring.Gas sensors based on conventional bulk materials often suffer from their poor surface-sensitive sites,leading to a very low gas adsorption ability.Moreover,the charge transportation efficiency is usually inhibited by the low defect density of surface-sensitive area than that in the interior.In this work,a gas sensing structure model based on CuS quantum dots/Bi_(2)S_(3) nanosheets(CuS QDs/Bi_(2)S_(3) NSs)inspired by artificial neuron network is constructed.Simulation analysis by density functional calculation revealed that CuS QDs and Bi_(2)S_(3) NSs can be used as the main adsorption sites and charge transport pathways,respectively.Thus,the high-sensitivity sensing of NO_(2) can be realized by designing the artificial neuron-like sensor.The experimental results showed that the CuS QDs with a size of about 8 nm are highly adsorbable,which can enhance the NO_(2) sensitivity due to the rich sensitive sites and quantum size effect.The Bi_(2)S_(3) NSs can be used as a charge transfer network channel to achieve efficient charge collection and transmission.The neuron-like sensor that simulates biological smell shows a significantly enhanced response value(3.4),excellent responsiveness(18 s)and recovery rate(338 s),low theoretical detection limit of 78 ppb,and excellent selectivity for NO_(2).Furthermore,the developed wearable device can also realize the visual detection of NO2 through real-time signal changes.展开更多
Gas identification and concentration measurements are important for both understanding and monitoring a variety of phenomena from industrial processes to environmental change.Here a novel mid-IR plasmonic gas sensor w...Gas identification and concentration measurements are important for both understanding and monitoring a variety of phenomena from industrial processes to environmental change.Here a novel mid-IR plasmonic gas sensor with on-chip direct readout is proposed based on unity integration of narrowband spectral response,localized field enhancement and thermal detection.A systematic investigation consisting of both optical and thermal simulations for gas sensing is presented for the first time in three sensing modes including refractive index sensing,absorption sensing and spectroscopy,respectively.It is found that a detection limit less than 100 ppm for CO2 could be realized by a combination of surface plasmon resonance enhancement and metal-organic framework gas enrichment with an enhancement factor over 8000 in an ultracompact optical interaction length of only several microns.Moreover,on-chip spectroscopy is demonstrated with the compressive sensing algorithm via a narrowband plasmonic sensor array.An array of 80 such sensors with an average resonance linewidth of 10 nm reconstructs the CO2 molecular absorption spectrum with the estimated resolution of approximately 0.01 nm far beyond the state-of-the-art spectrometer.The novel device design and analytical method are expected to provide a promising technique for extensive applications of distributed or portable mid-IR gas sensor.展开更多
Ammonia detection possesses great potential in atmosphere environmental protection,agriculture,industry,and rapid medical diagnosis.However,it still remains a great challenge to balance the sensitivity,selectivity,wor...Ammonia detection possesses great potential in atmosphere environmental protection,agriculture,industry,and rapid medical diagnosis.However,it still remains a great challenge to balance the sensitivity,selectivity,working temperature,and response/recovery speed.In this work,Berlin green(BG)framework is demonstrated as a highly promising sensing material for ammonia detection by both density functional theory simulation and experimental gas sensing investigation.Vacancy in BG framework offers abundant active sites for ammonia absorption,and the absorbed ammonia transfers sufficient electron to BG,arousing remarkable enhancement of resistance.Pristine BG framework shows remarkable response to ammonia at 50–110°C with the highest response at 80°C,which is jointly influenced by ammonia’s absorption onto BG surface and insertion into BG lattice.The sensing performance of BG can hardly be achieved at room temperature due to its high resistance.Introduction of conductive Ti3CN MXene overcomes the high resistance of pure BG framework,and the simply prepared BG/Ti3CN mixture shows high selectivity to ammonia at room temperature with satisfying response/recovery speed.展开更多
An analysis of the response of surface acoustic wave sensors coated with polymer film based on new coating deposition (self-assemble and molecularly imprinted technology) is described and the response formulas are h...An analysis of the response of surface acoustic wave sensors coated with polymer film based on new coating deposition (self-assemble and molecularly imprinted technology) is described and the response formulas are hence deduced. Using the real part of shear modulus, the polymer can be classified into three types: glassy film, glassy-rubbery film and rubbery film, Experimental results show that the attenuation response is in better consistence with the simulation than in Martin's theory, but the velocity response does not accord with the calculation exactly. Maybe it is influenced by the experimental methods and environment. In addition, simulations of gas sorption for polymer films are performed. As for glassy film, the SAW sensor response increases with increasing fihn thickness, and the relationship between the sensor response and the concentration of gas is pretty linear, while as for glassy-rubbery flint and rubbery film, the relationship between the sensor sensitivity anti concentration of gas is very complicated. The ultimately calculated results indicate that the relationship between the sensor response and frequency is not always linear due to the viscoelastic prooerties of the polymer.展开更多
The sensitivity and selectivity to H_2 of a new In_2O_3-based gas sensor were improvedsignificantly by surface chemical modification. A dense layer of SiO_2 near the surface of the porousIn_2O_3 bead was formed by che...The sensitivity and selectivity to H_2 of a new In_2O_3-based gas sensor were improvedsignificantly by surface chemical modification. A dense layer of SiO_2 near the surface of the porousIn_2O_3 bead was formed by chemical vapor deposition(CVD)of diethoxydimethysilane(DEMS).The dense layer functioned as a molecular sieve, thereby the diffusion of gases with large moleculardiameters,except for H_2, was effectively controlled, resulting in a prominent selectivity and highsensitivity for H_2. The working mechanism of the sensor was also presented.展开更多
Hazardous gases have been strongly associated with being a detriment to human life within the environment The development of a reliable gas sensor with high response and selectivity is of great signifcance for detecti...Hazardous gases have been strongly associated with being a detriment to human life within the environment The development of a reliable gas sensor with high response and selectivity is of great signifcance for detecting different hazardous gases.TiO_(2) nanomaterials are promising candidates with great potential and excellent per-formance in gas sensor applications,such as hydrogen,acetone,ammonia,and ethanol detection.This review begins with a detailed discussion of the di ferent dimensional morphologies of TiO_(2),whitch affect the gas sensing performance of TiO_(2) sensors.The diverse morphologies of TiO_(2) can easily be tuned by regulating the manufacturing conditions.Meanwhile,they exhibit unique characteristics for detecting gases,including large specific suface area,superior elecron tr ansport rates,extraordinary pemmeability,and active reaction sites,which offer new opportunities to improve the gas sensing properties.In addition,a variety of efforts have been made to functional TiO_(2) nanomaterials to further enhance sensing properties,including TiO_(2)-based composites and light-assisted gas sensors.The enhanced gas sensing mechanisms of multi-component composite nano-materials based on TiO_(2) include loaded noble metals,doped elements,constructed heterojunctions,and com-pounded with other functional materials.Finally,several studies have been summarized to demonstate the compar ative sensing properties of TiO_(2)-based gas sensors.展开更多
基金supported by the National Key Research and Development Program of China(2021YFB3200400)the National Natural Science Foundation of China(62371299,62301314,and 62020106006)the China Postdoctoral Science Foundation(2023M732198).
文摘As information acquisition terminals for artificial olfaction,chemiresistive gas sensors are often troubled by their cross-sensitivity,and reducing their cross-response to ambient gases has always been a difficult and important point in the gas sensing area.Pattern recognition based on sensor array is the most conspicuous way to overcome the cross-sensitivity of gas sensors.It is crucial to choose an appropriate pattern recognition method for enhancing data analysis,reducing errors and improving system reliability,obtaining better classification or gas concentration prediction results.In this review,we analyze the sensing mechanism of crosssensitivity for chemiresistive gas sensors.We further examine the types,working principles,characteristics,and applicable gas detection range of pattern recognition algorithms utilized in gas-sensing arrays.Additionally,we report,summarize,and evaluate the outstanding and novel advancements in pattern recognition methods for gas identification.At the same time,this work showcases the recent advancements in utilizing these methods for gas identification,particularly within three crucial domains:ensuring food safety,monitoring the environment,and aiding in medical diagnosis.In conclusion,this study anticipates future research prospects by considering the existing landscape and challenges.It is hoped that this work will make a positive contribution towards mitigating cross-sensitivity in gas-sensitive devices and offer valuable insights for algorithm selection in gas recognition applications.
基金supported by the National Key Research and Development Program of China(2022YFB3205500)the National Natural Science Foundation of China(62371299,62301314 and 62101329)+2 种基金the China Postdoctoral Science Foundation(2023M732198)the Natural Science Foundation of Shanghai(23ZR1430100)supported by the Center for High-Performance Computing at Shanghai Jiao Tong University.
文摘Significant challenges are posed by the limitations of gas sensing mechanisms for trace-level detection of ammonia(NH3).In this study,we propose to exploit single-atom catalytic activation and targeted adsorption properties to achieve highly sensitive and selective NH3 gas detection.Specifically,Ni singleatom active sites based on N,C coordination(Ni-N-C)were interfacially confined on the surface of two-dimensional(2D)MXene nanosheets(Ni-N-C/Ti_(3)C_(2)Tx),and a fully flexible gas sensor(MNPE-Ni-N-C/Ti_(3)C_(2)Tx)was integrated.The sensor demonstrates a remarkable response value to 5 ppm NH3(27.3%),excellent selectivity for NH3,and a low theoretical detection limit of 12.1 ppb.Simulation analysis by density functional calculation reveals that the Ni single-atom center with N,C coordination exhibits specific targeted adsorption properties for NH3.Additionally,its catalytic activation effect effectively reduces the Gibbs free energy of the sensing elemental reaction,while its electronic structure promotes the spill-over effect of reactive oxygen species at the gas-solid interface.The sensor has a dual-channel sensing mechanism of both chemical and electronic sensitization,which facilitates efficient electron transfer to the 2D MXene conductive network,resulting in the formation of the NH3 gas molecule sensing signal.Furthermore,the passivation of MXene edge defects by a conjugated hydrogen bond network enhances the long-term stability of MXene-based electrodes under high humidity conditions.This work achieves highly sensitive room-temperature NH3 gas detection based on the catalytic mechanism of Ni single-atom active center with N,C coordination,which provides a novel gas sensing mechanism for room-temperature trace gas detection research.
基金supported by the National Natural Science Foundation of China(No.11375136).
文摘With the development of science and technology,the scale of industrial production continues to grow,and the types and quantities of gas raw materials used in industrial production and produced during the production process are also constantly increasing.These gases include flammable and explosive gases,and even contain toxic gases.Therefore,it is very important and necessary for gas sensors to detect and monitor these gases quickly and accurately.In recent years,a new two-dimensional material called MXene has attracted widespread attention in various applications.Their abundant surface functional groups and sites,excellent current conductivity,tunable surface chemistry,and outstanding stability make them promising for gas sensor applications.Since the birth of MXene materials,researchers have utilized the efficient and convenient solution etching preparation,high flexibility,and easily functionalize MXene with other materials to pre-pare composites for gas sensing.This has opened a new chapter in high-performance gas sensing materials and provided a new approach for advanced sensor research.However,previous reviews on MXene-based composite materials in gas sensing only focused on the performance of gas sensing,without systematically explaining the gas sensing mechanisms generated by different gases,as well as summarizing and predicting the advantages and disadvantages of MXene-based composite materials.This article reviews the latest progress in the application of MXene-based composite materials in gas sensing.Firstly,a brief summary was given of the commonly used methods for preparing gas sens-ing device structures,followed by an introduction to the key attributes of MXene related to gas sensing performance.This article focuses on the performance of MXene-based composite materials used for gas sensing,such as MXene/graphene,MXene/Metal oxide,MXene/Transition metal sulfides(TMDs),MXene/Metal-organic framework(MOF),MXene/Polymer.It summarizes the advantages and disadvantages of MXene com-posite materials with different composites and discusses the possible gas sensing mechanisms of MXene-based composite materials for different gases.Finally,future directions and inroads of MXenes-based composites in gas sensing are presented and discussed.
基金supported by the National Key R&D Program of China(No.2020YFB2008604,2021YFB3202500)the National Natural Science Foundation of China(No.61874034)the International Science and Technology Cooperation Program of Shanghai Science and Technology Innovation Action Plan(No.21520713300)。
文摘Highly sensitive gas sensors with remarkably low detection limits are attractive for diverse practical application fields including real-time environmental monitoring,exhaled breath diagnosis,and food freshness analysis.Among various chemiresistive sensing materials,noble metal-decorated semiconducting metal oxides(SMOs)have currently aroused extensive attention by virtue of the unique electronic and catalytic properties of noble metals.This review highlights the research progress on the designs and applications of different noble metal-decorated SMOs with diverse nanostructures(e.g.,nanoparticles,nanowires,nanorods,nanosheets,nanoflowers,and microspheres)for high-performance gas sensors with higher response,faster response/recovery speed,lower operating temperature,and ultra-low detection limits.The key topics include Pt,Pd,Au,other noble metals(e.g.,Ag,Ru,and Rh.),and bimetals-decorated SMOs containing ZnO,SnO_(2),WO_(3),other SMOs(e.g.,In_(2)O_(3),Fe_(2)O_(3),and CuO),and heterostructured SMOs.In addition to conventional devices,the innovative applications like photo-assisted room temperature gas sensors and mechanically flexible smart wearable devices are also discussed.Moreover,the relevant mechanisms for the sensing performance improvement caused by noble metal decoration,including the electronic sensitization effect and the chemical sensitization effect,have also been summarized in detail.Finally,major challenges and future perspectives towards noble metal-decorated SMOs-based chemiresistive gas sensors are proposed.
基金financially supported by the National Natural Science Foundation of China (Nos. 61971252 and51972182)the Shandong Provincial Natural Science Foundation (ZR2020JQ27 and ZR2021YQ42)the Youth Innovation Team Project of Shandong Provincial Education Department (2020KJN015)。
文摘Atomic layer deposition(ALD) is a versatile technique to deposit metals and metal oxide sensing materials at the atomic scale to achieve improved sensor functions. This article reviews metals and metal oxide semiconductor(MOS) heterostructures for gas sensing applications in which at least one of the preparation steps is carried out by ALD. In particular, three types of MOS-based heterostructures synthesized by ALD are discussed, including ALD of metal catalysts on MOS, ALD of metal oxides on MOS and MOS core–shell(C–S) heterostructures.The gas sensing performances of these heterostructures are carefully analyzed and discussed.Finally, the further developments required and the challenges faced by ALD for the synthesis of MOS gas sensing materials are discussed.
基金supported by the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications (Grant Nos. XK1060921115 and XK1060921002)Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 62204125)+1 种基金the National Key R&D Program of China (Grant No. 2022YFB3605404)the Natural Science Foundation of Guangdong Province, China (Grant No. 2019A1515010790)。
文摘A flower-like SnO_(2)–SnO/porous Ga N(FSS/PGaN) heterojunction was fabricated for the first time via a facile spraying process, and the whole process also involved hydrothermal preparation of FSS and electrochemical wet etching of GaN,and SnO_(2)–SnO composites with p–n junctions were loaded onto PGaN surface directly applied to H_(2)S sensor. Meanwhile,the excellent transport capability of heterojunction between FSS and PGaN facilitates electron transfer, that is, a response time as short as 65 s and a release time up to 27 s can be achieved merely at 150℃ under 50 ppm H_(2)S concentration, which has laid a reasonable theoretical and experimental foundation for the subsequent PGaN-based heterojunction gas sensor.The lowering working temperature and high sensitivity(23.5 at 200 ppm H2S) are attributed to the structure of PGaN itself and the heterojunction between SnO_(2)–SnO and PGaN. In addition, the as-obtained sensor showed ultra-high test stability.The simple design strategy of FSS/PGaN-based H_(2)S sensor highlights its potential in various applications.
文摘A new silicon beam resonator design for a novel gas sensor based on simultaneous conductivity and mass change measurement is investigated. High selectivity and sensitivity in gas detection can be obtained by measuring the charge-to-mass ratio of gas molecules. Structures of silicon beam resonators are designed, simulated, and optimized. This gas sensor is fabricated using sacrificial layer microelectronmechanical system technology, and the resonant frequency of the microbeam is measured.
基金ACKNOWLEDGMENTS This work was supported by the 211 project of Anhui University, the National Natural Science Foundation of China (No.11374013, No.61290301, No.51072001, No.51272001, and No.51272003), Anhui Provincial Natural Science Fund (No.l1040606M49), Higher Educational Natural Science Foundation of Anhui Province (No.KJ2012A007), and the PhD Start-up Fund of Anhui University (No.33190209). Ming-zai Wu thanks Dr. Fan-li Meng and Miss Hui-hua Li from the Institute of Intelligent Machines, CAS for the help with gas sensing experiment.
文摘Three-dimensional (3D) hierarchical Co3O4 microcrystal with radial dendritic morphologies was prepared through hydrothermal reactions followed by subsequent annealing treatment. Structural and morphological characterizations were performed by X-ray diffraction, scan-ning electron microscopy and transmission electron microscopy. The gas sensing properties of the as-obtained microcrystal were investigated at 110 oC, which revealed that the 3D hierarchical porous Co3O4 microcrystal exhibited high sensitivity to ammonia, as well as a short response time of 10 s. The response characteristic indicates that the sensor has a good stability and reversibility. Detections of toxic and flammable gases, such as ethanol, acetone and benzene were also carried out at a relative low temperature. The results indicate that such hierarchical Co3O4 microcrystal would be a potential material in the field of gas sensing.
基金The National Natural Science Foundation of China (No.58175122)the Natural Science Foundation of Jiangsu Province (No.BK2007185)+1 种基金the Natural Science Foundation of Higher Education Institutions of Jiangsu Province(No.07KJB460044)the Scientific Research Innovation Project for College Graduates in Jiangsu Province (No.CXZZ11_0340)
文摘In order to simplify the fabrication process,distribute the temperature uniformly and reduce the power consumption of the micro-hotplate(MHP) gas sensor,a planar-type gas sensor based on SnO2 thin film with suspended structure is designed through a MEMS process.Steady-state thermal analysis of the gas sensor and the closed membrane type sensor where the membrane overlaps the Si substrate is carried out with the finite element model,and it is shown that the suspended planar-type gas sensor has a more homogeneous temperature distribution and a lower power consumption.When the maximum temperature on the sensor reaches 383℃,the power consumption is only 7 mW,and the temperature gradient across the thin film is less than 14℃.To overcome the fragility of the suspended beams,a novel fabrication process in which the deposition of the gas sensing film occurs prior to the formation of suspended beams is proposed.The back side of the Si substrate is etched through deep reactive ion etching(DRIE) to avoid chemical pollution of the front side.The fabrication steps in which only four masks are used for the photolithography are described in detail.The Fe doped SnO2 thin film synthesized by sol-gel spin-coating is used as the gas sensing element.The device is tested on hydrogen and exhibits satisfactory sensing performance.The sensitivity increases with the rise of the concentration from 50×10-6 to 2000×10-6,and reaches about 30 at 2000×10-6.
文摘In-system programmable devices are products that combined modern electronic techniques and semiconductor techniques.They are indispensable devices in designing modern circuits and systems.This paper presents two practical circuits designed with programmable devices and its design method.By introducing programmable devices into gas sensor circuits,we can further improve system reliability,stability,sensitivity and integration degree,and enhance flexibility of system design.
基金This work was supported by the National Natural Science Foundation of China (No.U1432108) and the Fundamental Research Funds for the Central Universities (No.WK2320000034).
文摘SnO2 nanofibers were synthesized by electrospinning and modified with Co3O4 via impregnation in this work. Chemical composition and morphology of the nanofibers were system- atically characterized, and their gas sensing properties were investigated. Results showed that Co3O4 modification significantly enhanced the sensing performance of SnO2 nanofibers to ethanol gas. For a sample with 1.2 mol% Co3O4, the response to 100 ppm ethanol was 38.0 at 300 ℃, about 6.7 times larger than that of SnO2 nanofibers. In addition, the response/recovery time was also greatly reduced. A power-law dependence of the sensor response on the ethanol concentration as well as excellent ethanol selectivity was observed for the Co3O4/SnO2 sensor. The enhanced ethanol sensing performance may be attributed to the formation of p-n heterojunctions between the two oxides.
基金the financial support of the Department of Science and Engineering Research Board (SERB) (Sanction Order No. CRG/2019/000112)。
文摘Room-temperature gas sensors have aroused great attention in current gas sensor technology because of deemed demand of cheap,low power consumption and portable sensors for rapidly growing Internet of things applications.As an important approach,light illumination has been exploited for room-temperature operation with improving gas sensor's attributes including sensitivity,speed and selectivity.This review provides an overview of the utilization of photoactivated nanomaterials in gas sensing field.First,recent advances in gas sensing of some exciting different nanostructures and hybrids of metal oxide semiconductors under light illumination are highlighted.Later,excellent gas sensing performance of emerging two-dimensional materialsbased sensors under light illumination is discussed in details with proposed gas sensing mechanism.Originated impressive features from the interaction of photons with sensing materials are elucidated in the context of modulating sensing characteristics.Finally,the review concludes with key and constructive insights into current and future perspectives in the light-activated nanomaterials for optoelectronic gas sensor applications.
基金the Department of Atomic Energy(DAE)under Project No.34/20/09/2015/BRNSthe Department of Physics,IIT Ropar for providing financial support and the research facility。
文摘Nitrogen dioxide(NO2),a hazardous gas with acidic nature,is continuously being liberated in the atmosphere due to human activity.The NO2 sensors based on traditional materials have limitations of high-temperature requirements,slow recovery,and performance degradation under harsh environmental conditions.These limitations of traditional materials are forcing the scientific community to discover future alternative NO2 sensitive materials.Molybdenum disulfide(MoS2)has emerged as a potential candidate for developing next-generation NO2 gas sensors.MoS2 has a large surface area for NO2 molecules adsorption with controllable morphologies,facile integration with other materials and compatibility with internet of things(IoT)devices.The aim of this review is to provide a detailed overview of the fabrication of MoS2 chemiresistance sensors in terms of devices(resistor and transistor),layer thickness,morphology control,defect tailoring,heterostructure,metal nanoparticle doping,and through light illumination.Moreover,the experimental and theoretical aspects used in designing MoS2-based NO2 sensors are also discussed extensively.Finally,the review concludes the challenges and future perspectives to further enhance the gas-sensing performance of MoS2.Understanding and addressing these issues are expected to yield the development of highly reliable and industry standard chemiresistance NO2 gas sensors for environmental monitoring.
基金This work is supported by This work was supported by the National Key R&D Program of China(Nos.2020YFB2008604 and 2021YFB3202500)the National Natural Science Foundation of China(Nos.61874034 and 51861135105)+1 种基金the International Science and Technology Cooperation Program of Shanghai Science and Technology Innovation Action Plan(No.21520713300)Fudan University-CIOMP Joint Fund(E02632Y7H0).
文摘With the rapid development of the Internet of Things,there is a great demand for portable gas sensors.Metal oxide semiconductors(MOS)are one of the most traditional and well-studied gas sensing materials and have been widely used to prepare various commercial gas sensors.However,it is limited by high operating temperature.The current research works are directed towards fabricating high-performance flexible room-temperature(FRT)gas sensors,which are effective in simplifying the structure of MOS-based sensors,reducing power consumption,and expanding the application of portable devices.This article presents the recent research progress of MOS-based FRT gas sensors in terms of sensing mechanism,performance,flexibility characteristics,and applications.This review comprehensively summarizes and discusses five types of MOS-based FRT gas sensors,including pristine MOS,noble metal nanoparticles modified MOS,organic polymers modified MOS,carbon-based materials(carbon nanotubes and graphene derivatives)modified MOS,and two-dimensional transition metal dichalcogenides materials modified MOS.The effect of light-illuminated to improve gas sensing performance is further discussed.Furthermore,the applications and future perspectives of FRT gas sensors are also discussed.
基金supported by the National Natural Science Foundation of China(61971284)the Oceanic Interdisciplinary Program of Shanghai Jiao Tong University(SL2020ZD203 and SL2020MS031)+2 种基金Scientific Research Fund of Second Institute of Oceanography,Ministry of Natural Resources of P.R.China(SL2003)Shanghai Sailing Program(21YF1421400)Startup Fund for Youngman Research at Shanghai Jiao Tong University.
文摘Real-time rapid detection of toxic gases at room temperature is particularly important for public health and environmental monitoring.Gas sensors based on conventional bulk materials often suffer from their poor surface-sensitive sites,leading to a very low gas adsorption ability.Moreover,the charge transportation efficiency is usually inhibited by the low defect density of surface-sensitive area than that in the interior.In this work,a gas sensing structure model based on CuS quantum dots/Bi_(2)S_(3) nanosheets(CuS QDs/Bi_(2)S_(3) NSs)inspired by artificial neuron network is constructed.Simulation analysis by density functional calculation revealed that CuS QDs and Bi_(2)S_(3) NSs can be used as the main adsorption sites and charge transport pathways,respectively.Thus,the high-sensitivity sensing of NO_(2) can be realized by designing the artificial neuron-like sensor.The experimental results showed that the CuS QDs with a size of about 8 nm are highly adsorbable,which can enhance the NO_(2) sensitivity due to the rich sensitive sites and quantum size effect.The Bi_(2)S_(3) NSs can be used as a charge transfer network channel to achieve efficient charge collection and transmission.The neuron-like sensor that simulates biological smell shows a significantly enhanced response value(3.4),excellent responsiveness(18 s)and recovery rate(338 s),low theoretical detection limit of 78 ppb,and excellent selectivity for NO_(2).Furthermore,the developed wearable device can also realize the visual detection of NO2 through real-time signal changes.
基金We are grateful for financial supports from National Key Research and Development Program of China(No.2019YFB2203402)National Natural Science Foundation of China(Nos.11774383,11774099,11874029)+3 种基金Guangdong Science and Technology Program International Cooperation Program(2018A050506039)Guangdong Natural Science Founds for Distinguished Young Scholars(No.2020B151502074),Pearl River Talent Plan Program of Guangdong(No.2019QN01X120)Fundamental Research Funds for the Central Universities,Royal Society Newton Advanced Fellowship(No.NA140301)Key Frontier Scientific Research Program of the Chinese Academy of Sciences(No.QYZDBSSW-JSC014).
文摘Gas identification and concentration measurements are important for both understanding and monitoring a variety of phenomena from industrial processes to environmental change.Here a novel mid-IR plasmonic gas sensor with on-chip direct readout is proposed based on unity integration of narrowband spectral response,localized field enhancement and thermal detection.A systematic investigation consisting of both optical and thermal simulations for gas sensing is presented for the first time in three sensing modes including refractive index sensing,absorption sensing and spectroscopy,respectively.It is found that a detection limit less than 100 ppm for CO2 could be realized by a combination of surface plasmon resonance enhancement and metal-organic framework gas enrichment with an enhancement factor over 8000 in an ultracompact optical interaction length of only several microns.Moreover,on-chip spectroscopy is demonstrated with the compressive sensing algorithm via a narrowband plasmonic sensor array.An array of 80 such sensors with an average resonance linewidth of 10 nm reconstructs the CO2 molecular absorption spectrum with the estimated resolution of approximately 0.01 nm far beyond the state-of-the-art spectrometer.The novel device design and analytical method are expected to provide a promising technique for extensive applications of distributed or portable mid-IR gas sensor.
基金The research was supported by the National Natural Science Foundation of China(Grant Nos.61435010,61675135,and 62005177)the National Natural Science Foundation for Young Scientists of China(Grant No.61905161)the Science and Technology Innovation Commission of Shenzhen(JCYJ20190808142415003).Authors also acknowledge the support from Instrumental Analysis Center of Shenzhen University(Xili Campus).
文摘Ammonia detection possesses great potential in atmosphere environmental protection,agriculture,industry,and rapid medical diagnosis.However,it still remains a great challenge to balance the sensitivity,selectivity,working temperature,and response/recovery speed.In this work,Berlin green(BG)framework is demonstrated as a highly promising sensing material for ammonia detection by both density functional theory simulation and experimental gas sensing investigation.Vacancy in BG framework offers abundant active sites for ammonia absorption,and the absorbed ammonia transfers sufficient electron to BG,arousing remarkable enhancement of resistance.Pristine BG framework shows remarkable response to ammonia at 50–110°C with the highest response at 80°C,which is jointly influenced by ammonia’s absorption onto BG surface and insertion into BG lattice.The sensing performance of BG can hardly be achieved at room temperature due to its high resistance.Introduction of conductive Ti3CN MXene overcomes the high resistance of pure BG framework,and the simply prepared BG/Ti3CN mixture shows high selectivity to ammonia at room temperature with satisfying response/recovery speed.
基金This work was supported by National Natural Science Foundation (No. 10374100).
文摘An analysis of the response of surface acoustic wave sensors coated with polymer film based on new coating deposition (self-assemble and molecularly imprinted technology) is described and the response formulas are hence deduced. Using the real part of shear modulus, the polymer can be classified into three types: glassy film, glassy-rubbery film and rubbery film, Experimental results show that the attenuation response is in better consistence with the simulation than in Martin's theory, but the velocity response does not accord with the calculation exactly. Maybe it is influenced by the experimental methods and environment. In addition, simulations of gas sorption for polymer films are performed. As for glassy film, the SAW sensor response increases with increasing fihn thickness, and the relationship between the sensor response and the concentration of gas is pretty linear, while as for glassy-rubbery flint and rubbery film, the relationship between the sensor sensitivity anti concentration of gas is very complicated. The ultimately calculated results indicate that the relationship between the sensor response and frequency is not always linear due to the viscoelastic prooerties of the polymer.
文摘The sensitivity and selectivity to H_2 of a new In_2O_3-based gas sensor were improvedsignificantly by surface chemical modification. A dense layer of SiO_2 near the surface of the porousIn_2O_3 bead was formed by chemical vapor deposition(CVD)of diethoxydimethysilane(DEMS).The dense layer functioned as a molecular sieve, thereby the diffusion of gases with large moleculardiameters,except for H_2, was effectively controlled, resulting in a prominent selectivity and highsensitivity for H_2. The working mechanism of the sensor was also presented.
基金National Natural Science Foundation of China(No.61761047 and 41876055)the Yunnan Provincial Depart-ment of Science and Technology through the Key Project for the Science and Technology(Grant No.2017FA025)Program for hnovative Research Team(in Science and Technology)in University of Yunnan Province.
文摘Hazardous gases have been strongly associated with being a detriment to human life within the environment The development of a reliable gas sensor with high response and selectivity is of great signifcance for detecting different hazardous gases.TiO_(2) nanomaterials are promising candidates with great potential and excellent per-formance in gas sensor applications,such as hydrogen,acetone,ammonia,and ethanol detection.This review begins with a detailed discussion of the di ferent dimensional morphologies of TiO_(2),whitch affect the gas sensing performance of TiO_(2) sensors.The diverse morphologies of TiO_(2) can easily be tuned by regulating the manufacturing conditions.Meanwhile,they exhibit unique characteristics for detecting gases,including large specific suface area,superior elecron tr ansport rates,extraordinary pemmeability,and active reaction sites,which offer new opportunities to improve the gas sensing properties.In addition,a variety of efforts have been made to functional TiO_(2) nanomaterials to further enhance sensing properties,including TiO_(2)-based composites and light-assisted gas sensors.The enhanced gas sensing mechanisms of multi-component composite nano-materials based on TiO_(2) include loaded noble metals,doped elements,constructed heterojunctions,and com-pounded with other functional materials.Finally,several studies have been summarized to demonstate the compar ative sensing properties of TiO_(2)-based gas sensors.