Pore throat structure heterogeneity and its effect on gas-phase seepage capacity in tight sandstone reservoirs:A case study from the Triassic Yanchang Formation,Ordos Basin

The microscopic heterogeneity of pore-throat structures in tight sandstone is a crucial parameter for understanding the transport mechanism of fluid flow.In this work,we firstly developed the new procedure to characterize the pore size distribution(PSD)and throat size distribution(TSD)by combining the nuclear magnetic resonance(NMR),cast thin section(CTS),and constant-rate mercury injection(CRMI)tests,and used the permeability estimated model to verify the full-scale PSD and TSD.Then,we respectively analyzed the fractal feature of the pore and throat,and characterized the heterogeneity of pores and throats.Finally,we elaborated the effect of the pore and throat heterogeneity on the gas-phase seepage capacity base on the analysis of the simple capillary tube model and gas-flooding experiment.The results showed that(1)The PSD and TSD of the tight sandstone sample ranged from 0.01 to 10 mm and from 0.1 to 57 mm,respectively,mainly contributed by the micropores and mesopores.Meanwhile,the permeability estimated by the PSD and TSD was consistent with the experimental permeability,and relative error was lower than 8%.(2)The PSD and TSD exhibited multifractal characteristics,and singularity strength range,Δα,could be used as the indicator for characterizing the heterogeneity of pore and throat.Furthermore,the throat of the sample showed stronger heterogeneity than that the pore.(3)The throats played an important role for the fluid transport in the tight sandstone,and the effect of the throat heterogeneity on the gas-phase seepage capacity was different under the lower and higher injection pressure.The macropores and micropores maybe respectively become the preferential migration pathways at the lower and higher injection pressure.In the end,the identification plate was established in our paper,and could be described the relationship among the throat heterogeneity,injection pressure,permeability and flow path of the gas phase in the tight sandstone.

Gas-phase electrocatalytic reduction of carbon dioxide using electrolytic cell based on phosphoric acid-doped polybenzimidazole membrane

Carbon dioxide transformation to fuels or chemicals provides an attractive approach for its utilization as feedstock and its emission reduction. Herein, we report a gas-phase electrocatalytic reduction of CO2 in an electrolytic cell, constructed using phosphoric acid-doped polybenz- imidazole （PBI） membrane, which allowed operation at 170 ℃ Pt/C and PtMo/C with variable ratio of Pt/Mo were studied as the cathode catalysts. The results showed that PtMo/C catalysts significantly enhanced CO formation and inhibited CH4 formation compared with Pt/C catalyst. Characterization by X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy revealed that most Mo species existed as MoO3 in PtMo/C catalysts and the interaction between Pt and MoOx was likely responsible for the enhanced CO formation rate although these bicomponent catalysts in general had a larger particle size than Pt/C catalyst.

Synthesis of dimethyl carbonate by gas-phase oxidative carbonylation of methanol in the presence of solid catalyst I. Catalyst preparation and catalytic Properties

The gas-phase synthesis of dimethyl carbonate (DMC) from methanol, carbon monoxide and oXygen has here Studied in a flow system at atomspheric Pressure. A series of Catalyst used in this reaCtion have been prepared and evaluated. The influence of trivared carbon supporters, alkaline metal Promoters and operation conditions on DMC opthesis reaction has been discussed. Under the conditions of 130℃, CO/O2=1 .96, SV=3340h-1, the space-time yield (STY) of DMC over PdCl2-CuCl2-CH3COOK/ac. catalyst is 217g/l-cat h,which is higher than what is published in the literatUre so far.

Gas-phase dehydrochlorination of 1, 1, 2, 2-tetrachloroethane over the non-metal supported ionic liquid catalyst

Developing of non-metallic catalyst to replace metal catalyst is a meaningful and challenging direction.In this work,the non-metallic catalyst was synthetized successfully by loading ionic liquid onto the silica surface,which was applied for the gas-phase dehydrochlorination of 1,1,2,2-tetrachloroethane.The 12%TPPC/SiO2(wt%)showed the best results with the conversion of 1,1,2,2-tetrachloroethane reaching 100%.The selectivity of 1,1,2-trichloroethylene was 100%,and no deactivation was found during the evaluation period.The catalytic mechanism was investigated and possible reaction route was given,which was a reference for fabricating and design of solid base catalyst.

Anaerobic digestion of kitchen wastes in a single-phased anaerobic sequencing batch reactor(ASBR) with gas-phased absorb of CO_2

The performance of the single-stage anaerobic digestion of kitchen wastes was investigated in an anaerobic sequencing batch reactor(ASBR) with gas-phased absorb of CO 2. The ASBR was operated at four chemical oxygen demand(COD) loading rates, 2.8, 5.1, 6.2 and 8.4 g/(L·d) respectively. The COD loading rate was increased with the TS concentration and HRT changing. At maximum COD loading rate of 8.4 g/(L·d), the COD, total solid(TS) removal rate and methane gas yield were 69%, 68% and 2.5 L/(L·d) respectively. The operation of the reactor with gas-phased absorb of CO 2 was stable in spite of the low pH(2.6—3.9) and high concentration of TS(142 g/L) of input mixture. The output volatile fatty acid(VFA) concentration was between 2.7—4.7 g/L and had no inhibition on the methanogenic microorganism. The reactor without gas-phased absorb of CO 2 became acidified when the total COD loading rate was increased to 5.1 g/(L·d). Stoichiometry of the methanogenesis for kitchen wastes showed a considerable amount of alkaline will be required to keep pH in the appropriate range for the methanogenic microorganism based on theoretical calculation. Gas-phased absorb of CO 2 effectively reduced the alkaline consumption, hence avoided excessive cation into the reactor.

Gas-phase CO_(2)activation with single electrons,metal atoms,clusters,and molecules

In this review,the history and outlook of gas-phase CO_(2)activation using single electrons,metal atoms,clusters(mainly metal hydride clusters),and molecules are discussed on both of the experimental and theoretical fronts.Although the development of bulk solid-state materials for the activation and conversion of CO_(2)into value-added products have enjoyed great success in the past several decades,this review focuses only on gas-phase studies,because isolated,well-defined gas-phase systems are ideally suited for high-resolution experiments using state-of-the-art spectrometric and spectroscopic techniques,and for simulations employing modern quantum theoretical methods.The unmatched high complementarity and comparability of experiment and theory in the case of gas-phase investigations bear an enormous potential in providing insights in the reactions of CO_(2)activation at the atomic level.In all of these examples,the reduction and bending of the inert neutral CO_(2)molecule is the critical step determined by the frontier orbitals of reaction participants.Based on the results and outlook summarized in this review,we anticipate that studies of gas-phase CO_(2)activations will be an avenue rich with opportunities for the rational design of novel catalysts based on the knowledge obtained on the atomic level.

Industrial Preparation and Acid Resistance of Ultra-stable Y Zeolite with Small Cell Size Produced by Gas-phase Method

Small-cell HSY-S zeolite prepared by the gas-phase ultra-stable method had been researched and developed,and industrial preparation tests of HSY-S have been successfully carried out for the first time.The acid resistance of industrially prepared HSY-S was investigated by acid solutions with different pH values.The structures and properties of HSY-S and its acid-treated samples were characterized by XRD,XRF,BET,and IR.Results show that the HSY-S samples have the characteristics of high crystallinity,good stability,large specific surface area,and good acid resistance.

GAS-PHASE ION-MOLECULE REACTIONS OF BUCKMINSTERFULLERENE(C_(60))WITH Si(CH_3)_n CL_(4-n)(n=2,3)IN MASS SPECTROMETER

Reactions of C60 with Si(CH_3)_nCl_(4-n) (n=2,3)in the ion source of the mass spectrometer have been studied.The corresponding adduct ions[C60Si(CH_3)_mCl3_(-m)]^+(m=1,2,3),[C60SiCl]^+ and[C60CH_3]^+ were observed and their possible structures were discussed.The results indicated that C60 is very reactive to electrophiles in the gas phase.

NOX -Catalyzed Gas-Phase Activation of Methane: the Formation of Hydrogen

NO_x-catalyzed oxidation of methane without a solid catalyst wasinvestigated, and a hydrogen selectivity of 27% was obtained with an overall methane conversion of34% and a free O_2 concentration of 1.7% at 700℃.

The structure optimization of gas-phase surface discharge and its application for dye degradation

A gas-phase surface discharge（GSD）was employed to optimize the discharge reactor structure and investigate the dye degradation.A dye mixture of methylene blue,acid orange and methyl orange was used as a model pollutant.The results indicated that the reactor structure of the GSD system with the ratio of tube inner surface area and volume of 2.48,screw pitch between a high-voltage electrode of 9.7 mm,high-voltage electrode wire diameter of 0.8 mm,dielectric tube thickness of2.0 mm and tube inner diameter of 16.13 mm presented a better ozone（O_3）generation efficiency.Furthermore,a larger screw pitch and smaller wire diameter enhanced the O_3generation.After the dye mixture degradation by the optimized GSD system,73.21%and 50.74%of the chemical oxygen demand（COD）and total organic carbon removal rate were achieved within 20 min,respectively,and the biochemical oxygen demand（BOD）and biodegradability（BOD/COD）improved.

AB INITIO STUDY ON GAS-PHASE FACTION OF Ca WITH HN_3

The reaction of Ca with HN3 has been investigated theoretically by an ah initio MO methodwith electron correlation being taken into account by second-order MLLER-PLESSET(MP2)perturbation theory Two possible product channels. CaN3+H. CaNH+N2, on the potential energysurfaces(PESs) have been examined and the reaction mechanism discussed. Values of tile HN-NZ,HN3, Ca-N3 and Ca-AH bond dissociation energy are also calculated, which are in good agreement withexperiment

A Condensed Gas-Phase Chemical Model and Its Application

Using the 'lumped mechanism' and 'counting species' methods, we developed a condensed gas-phase chemical model based on a simplified one. The modified quasi-steady-state approximation (QSSA) scheme and the error redistribution mass conservation technique are adopted to solve the atmospheric chemistry kinetic equations. Results show that the condensed model can well simulate concentration variations of gas species such as SO2, NOX, O-3, H2O2 and conversion rates of SO2 and NOX transformation to H2SO4 and HNO3. These results are in good agreement with those from the simplified model. The conversion rates of SO2 and NOX under different initial concentrations and meteorological conditions are computed, and the results can be directly applied to regional acid deposition model.

Gas-Phase Conversion of the U(VI), Sr, Mo, and Zr Oxides in Nitrating Atmosphere

The gas-phase conversion of U3O8, MoO3, SrO, and their mechanical mixtures, and also of ZrO2 into water-soluble compounds in the atmosphere of (NOx + vapor H2O) or HNO3 (vapor) was studied. In the course of gas-phase conversion, U3O8 and SrO transform into water-soluble compounds (nitrates, hydroxonitrates), whereas MoO3 and ZrO2 undergo no changes. The principal possibility of separating U from Mo and Zr by gas-phase conversion of the oxides in the atmosphere of (NOx + vapor H2O) or HNO3 (vapor) was demonstrated.

2-42 Gas-phase Chemistry Study of Ruthenium and Rhodium Carbonyls

In this work, gas-phase chemistry of ruthenium and rhodium was studied using online isothermal chromatographyapparatus at low temperature coupled to the 252Cf SF source[1] at IMP (Fig. 1). Apart from the interferenceof precursor effect[2], 109?110Ru and 111?112Rh were chosen as the representative isotopes for the two elementsrespectively. An improved Monte Carlo molecular simulation program was compiled according to the gas-phasechemistry model[3], and was used in the optimization of the experimental condition. The adsorption enthalpies ofpentacarbonyl ruthenium and tetracarbonyl rhodium on the FEP surface were obtained.

Characterization of a smog chamber for studying formation of gas-phase products and secondary organic aerosol

Smog chambers provide a potent approach to explore the secondary organic aerosol formation under varied conditions.This study describes the construction and characterization of a new smog chamber facility for studying the formation mechanisms of gas-phase products and secondary organic aerosol from the photooxidation of volatile organic compounds.The chamber is a 5.4 m^(3) Fluorinated Ethylene Propylene(FEP)Teflon reactor with the potential to perform photooxidation experiments at controlled temperature and relative humidity.Detailed characterizations were conducted for evaluation of stability of environmental parameters,mixing time,background contamination,light intensity,and wall losses of gases and particles.The photolysis rate of NO_(2)(J_(NO2))ranged from(1.02-3.32)×10^(-3)sec^(-1),comparable to the average J_(NO2)in ambient environment.The wall loss rates for NO,NO_(2),and O_(3)were 0.47×10^(-4),0.37×10^(-4),and 1.17×10^(-4)min^(-1),while wall loss of toluene was obsoletely found in a 6 hr test.The particle number wall loss rates are(0.01-2.46)×10^(-3)min^(-1)for 40-350 nm with an average lifetime of more than one day.A series of toluene photooxidation experiments were carried out in absence of NO_xunder dry conditions.The results of the simulation experiments demonstrated that the chamber is well designed to simulate photolysis progress in the atmosphere.

A review of gas-phase chemical mechanisms commonly used in atmospheric chemistry modelling

The atmospheric chemical mechanism is an essential component of airshed models used for investigating the chemical behaviors and impacts of species.Since the first tropospheric chemical mechanism was proposed in the 1960s,various mechanisms including Master Chemical Mechanism(MCM),Carbon Bond Mechanism(CBM),Statewide Air Pollution Research Center(SAPRC)and Regional Atmospheric Chemistry Mechanism(RACM)have been developed for different research purposes.This work summarizes the development and applications of these mechanisms,introduces their compositions and lumping methods,and compares the ways the mechanisms treat radicals with box model simulations.CBM can reproduce urban pollution events with relatively low cost compared to SAPRC and RACM,whereas the chemical behaviors of radicals and the photochemical production of ozone are described in detail in RACM.The photolysis rates of some oxygenated compounds are low in SAPRC07,which may result in underestimation of radical levels.As an explicit chemical mechanism,MCM describes the chemical processes of primary pollutants and their oxidation products in detail.MCM can be used to investigate certain chemical processes;however,due to its large size,it is rarely used in regional model simulations.A box model case study showed that the chemical behavior of OH and HO_(2)radicals and the production of ozone were well described by all mechanisms.CBM and SAPRC underestimated the radical levels for different chemical treatments,leading to low ozone production values in both cases.MCM and RACM are widely used in box model studies,while CBM and SAPRC are often selected in regional simulations.

One-step gas-phase construction of carbon-coated Fe3O4 nanoparticle/carbon nanotube composite with enhanced electrochemical energy storage

Carbon nanotubes(CNTs)as superior support materials for functional nanoparticles(NPs)have been widely demonstrated.Nevertheless,the homogeneous loading of these NPs is still frustrated due to the inert surface of CNTs.In this work,a facile gas-phase pyrolysis strategy that the mixture of ferrocene and CNTs are confined in an isolated reactor with rising temperature is developed to fabricate a carbon-coated Fe3O4 nanoparticle/carbon nanotube(Fe3O4@C/CNT)composite.It is found the ultra-small Fe3O4 NPs(<10 nm)enclosed in a thin carbon layer are uniformly anchored on the surface of CNTs.These structural benefits result in the excellent lithium-ion storage performances of the Fe3O4@C/CNT composite.It delivers a stable reversible capacity of 861 mA·h·g^-1 at the current density of 100 mA·g^-1 after 100 cycles.The capacity retention reaches as high as 54.5%even at 6000 mA·g^-1.The kinetic analysis indicates that the featured structural modification improves the surface condition of the CNT matrix,and contributes to greatly decreased interface impendence and faster charge transfer.In addition,the post-morphology observation of the tested sample further confirms the robustness of the Fe3O4@C/CNT configuration.

Determination of 15 phthalate esters in air by gas-phase and particle-phase simultaneous sampling

Based on previous research, the sampling and analysis methods for phthalate esters （PAEs） were improved by increasing the sampling flow of indoor air from 1 to 4 L/min, shortening the sampling duration from 8 to 2 hr. Meanwhile, through the optimization of chromatographic conditions, the concentrations of 9 additional PAE pollutants in indoor air were measured. The optimized chromatographic conditions required a similar amount of time for analysis as before, but gave high responsivity, the capability of simultaneously distinguishing 15 kinds of PAEs, and a high level of discrimination between individual sample peaks, as well as stable peak generation. The recovery rate of all gas-phase and particle-phase samples of the 15 kinds of PAEs ranged from 91.26% to 109.42%, meeting the quantitative analysis requirements for indoor and outdoor air sampling and analysis. For the first time, investigation of the concentration levels as well as characteristics of 15 kinds of PAEs in the indoor air from four different traffic micro-environments （private vehicles, busses, taxis and subways） was carried out, along with validation of the optimized sampling and analytical method. The results show that all the 9 additional PAEs could be detected at relatively high pollution levels in the indoor air from the four traffic micro-environments. As none of the pollution levels of the 15 kinds of PAEs in the indoor air from the 4 traffic micro-environments should be neglected, it is of great significance to increase the types of PAEs able to be detected in indoor air.

Advances in scalable gas-phase manufacturing and processing of nanostructured solids： A review

Although the gas-phase production of nanostructured solids has already been carried out in industry for decades, only in recentyears has research interest in this topic begun to increase. Nevertheless, despite the remarkable scientific progress made recently, many long-established processes are still used in industry. Scientific advancements can potentially lead to the improvement of existing industrial processes, but also to the development of completely new routes. This paper aims to review state-of-the-art synthesis and processing technologies, as well as the recent developments in academic research. Flame reactors that produce inorganic nanoparticles on industrial- and lab-scales are described, alongside a detailed overview of the different systems used for the production of carbon nanotubes and graphene. We discuss the problems of agglomeration and mixing of nanoparticles, which are strongly related to synthesis and processing. Finally, we focus on two promising processing techniques, namely nanoparticle fluidization and atomic layer deposition.

Theoretical studies on the mechanism of α-hydroxy-acid gas-phase elimination process and its substituent effect

The α-hydroxy-acid gas-phase elimination process has been studied theoretically by HF/3-21G.The calculated results can be summed up as follows:(1) The elimination process is a stepwise reaction.In the first step,a 3-membered ring intermediate is formed via a 5-membered ring transition state;while the product is formed in the second step via a 3-membered ring transition state.(2) The obtained results of the substituent effect show that the increase of electronic donation of the alkyl groups is favorable for the reaction.Other substituents which show the electron-withdrawing inductive effect (e.g.-Cl,-CN,-CF3) are unfavorable for this process.