A Au/Bi4Ti3O12/n-Si structure is fabricated in order to investigate its current voltage （IV） characteristics in a temperature range of 300 K-400 K. Obtained I-V data are evaluated by the thermionic emission （TE） t...A Au/Bi4Ti3O12/n-Si structure is fabricated in order to investigate its current voltage （IV） characteristics in a temperature range of 300 K-400 K. Obtained I-V data are evaluated by the thermionic emission （TE） theory. Zero-bias barrier height （Ф0） and ideality factor （n） calculated from I-V characteristics, are found to be temperature-dependent such that ФB0 increases with temperature increasing, whereas n decreases. The obtained temperature dependence of ФB0 and linearity in ФB0 versus the n plot, together with a lower barrier height and Richardson constant values obtained from the Richardson plot, indicate that the barrier height of the structure is inhomogeneous in nature. Therefore, I-V characteristics are explained on the basis of Caussian distribution of barrier height.展开更多
It was analyzed that the finite element-cellular automaton （CAFE） method was used to simulate 3D-microstructures in solidification processes. Based on this method, the 3D-microstructure of 9SMn28 free-cutting steel ...It was analyzed that the finite element-cellular automaton （CAFE） method was used to simulate 3D-microstructures in solidification processes. Based on this method, the 3D-microstructure of 9SMn28 free-cutting steel was simulated in solidification processes and the simulation results are consistent with the experimental ones. In addition, the effects of Gaussian distribution parameters were also studied. The simulation results show that the higher the mean undercooling, the larger the columnar dendrite zones, and the larger the maximum nucleation density, the smaller the size of grains. The larger the standard deviation, the less the number of minimum grains is. However, the uniformity degree decreases first, and then increases gradually.展开更多
基金Project supported by the Diizce University Scientific Research Project(Grant Nos.2010.05.02.056 and 2012.05.02.110)
文摘A Au/Bi4Ti3O12/n-Si structure is fabricated in order to investigate its current voltage （IV） characteristics in a temperature range of 300 K-400 K. Obtained I-V data are evaluated by the thermionic emission （TE） theory. Zero-bias barrier height （Ф0） and ideality factor （n） calculated from I-V characteristics, are found to be temperature-dependent such that ФB0 increases with temperature increasing, whereas n decreases. The obtained temperature dependence of ФB0 and linearity in ФB0 versus the n plot, together with a lower barrier height and Richardson constant values obtained from the Richardson plot, indicate that the barrier height of the structure is inhomogeneous in nature. Therefore, I-V characteristics are explained on the basis of Caussian distribution of barrier height.
基金supported by the National Natural Science Foundation of China (No.50874007, 50774109)
文摘It was analyzed that the finite element-cellular automaton （CAFE） method was used to simulate 3D-microstructures in solidification processes. Based on this method, the 3D-microstructure of 9SMn28 free-cutting steel was simulated in solidification processes and the simulation results are consistent with the experimental ones. In addition, the effects of Gaussian distribution parameters were also studied. The simulation results show that the higher the mean undercooling, the larger the columnar dendrite zones, and the larger the maximum nucleation density, the smaller the size of grains. The larger the standard deviation, the less the number of minimum grains is. However, the uniformity degree decreases first, and then increases gradually.
