Geologic Characteristics of Volcanic Hydrocarbon Reservoirs and Exploration Directions in China

Volcanic rocks are distributed widely in China, which are important exploration targets. By analyzing many discovered volcanic hydrocarbon reservoirs all over the world, the authors summarized the geologic characteristics of the formation of volcanic hydrocarbon reservoirs in China, and gave further exploration directions and advices. （1） There are mainly Carboniferous-Permian, Jurassic-Cretaceous, Paleogene-Neogene volcanic rocks in oil- and gas-bearing basins in China, which are mainly distributed in the Junggar Basin, Songliao Basin, Bohai Bay Basin, etc. There are mainly intermediate rocks and acidic rocks in east China, and intermediate rocks and basic rocks in west China. They primarily develop in intracontinentai rift settings and island arc environments. （2） Porefissure reservoirs are distributed widely in basins, which are volcanic rocks mainly in explosive and effusive facies. （3） Volcanic hydrocarbon reservoirs are chiefly near-source lithostratigraphic hydrocarbon reservoirs, and the oil and gas accumulation is predominantly controlled by lithotypes, faults and structural positions. （4） Deep-seated oil and gas reservoirs in the Songliao Basin and Carboniferous volcanic hydrocarbon reservoirs in the Junggar Basin are potential giant volcanic gas provinces, the volcanic hydrocarbon reservoirs in the Bohai Bay Basin and Santanghu Basin are favorable for oil and gas reserves increase, and volcanic rocks in the Turpan Basin, Sichuan Basin, Tarim Basin have exploration potentiality. （5） The technology series of oil and gas exploration in volcanic rocks have been preliminarily formed.

Geological characteristics of the southern segment of the Late Sinian–Early Cambrian Deyang-Anyue rift trough in Sichuan Basin, SW China

Based on the latest drilling, seismic and field outcrop data, the geological characteristics(e.g. strata, development and sedimentary evolution) of the southern segment of the Late Sinian–Early Cambrian Deyang–Anyue rift trough in the Sichuan Basin are analyzed. First, the strata in the southern segment are complete. The first to second members of Dengying Formation(Deng 1 + Deng 2) are found with relatively stable thickness(400–550 m), and the third to fourth members(Deng 3+ Deng 4) show great thickness difference between the marginal trough and the inner trough, which is up to 250 m. The Cambrian Maidiping Formation and Qiongzhusi Formation in southern Sichuan Basin are relatively thin, with the thickness changing greatly and frequently. Second, the Deyang–Anyue rift trough extended southward during the Deng 4 period, affecting southern Sichuan Basin. Compared to the middle and northern segments of the rift trough, the southern segment is generally wide, gentle and shallow, with multiple steps, and alternating uplifts and sags, which are distributed in finger shape. Third, the Deng 1 + Deng 2 in southern Sichuan Basin records the dominance of carbonate platform and unobvious sedimentary differentiation, and the Deng 4 exhibits obvious sedimentary differentiation, namely, basin–slope–secondary slope–slope–secondary slope–platform margin–restricted platform, from the inner trough to the marginal trough. Fourth, the rift trough in southern Sichuan Basin has evolved in four stages: stabilization of Deng 1–Deng 2, initialization of Deng 3–Deng 4, filling of Maidiping–Qiongzhusi, and extinction of Canglangpu Formation.

Geological and Geochemical Characteristics and Exploration Prospect of Coal-Derived Tight Sandstone Gas in China： Case Study of the Ordos, Sichuan, and Tarim Basins

This work extensively investigated global tight sandstone gas, and geologically and geochemically analyzed the tight sandstone gas in China＇s Ordos, Sichuan, and Tarim basins. We compared typical tight sandstone gas in China with that in North America. We proposed six conditions for the formation of China＇s tight sandstone gas, and illustrated the geological characteristics of tight sandstone gas. In China, gas-bearing tight sandstones were mainly deposited in continental lake deltas and marine-terrigenous facies basin environments, associated with coal-measure strata, and were mostly buried deeper than 2000 in under a formation pressure of 20-30 MPa, with pressure coefficients varying from overpressure to negative pressure. In other countries, tight gas bearing sandstones were dominantly deposited in marine to marine-terrigenous facies environments, occurred in coal-measure strata, and were mostly buried shallower than 2000 m in low-pressure systems. We systematically analyzed tight sandstone gas in the Ordos, Sichuan, and Tarim basins in terms of chemical compositions, geochemical characteristics of carbon isotopes, origins, and sources. Tight sandstone gas in China usually has a hydrocarbon content of 〉95%, with CH4 content 〉90%, and a generally higher dry coefficient. In the three above-mentioned large tight sandstone gas regions,δ13C1 and δJ3C2 mainly ranges from -42%o to -28%o and from -28%o to -21%o, respectively. Type III coal-measure source rocks that closely coexist with tight reservoirs are developed extensively in these gas regions. The organic petrology of source rocks and the carbon isotope compositions of gas indicate that tight sandstone gas in China is dominantly coal-derived gas generated by coal-measure strata. Our analysis of carbon isotope series shows that local isotope reversals are mainly caused by the mixing of gases of different maturities and that were generated at different stages. With increasing maturity, the reversal tendency becomes more apparent. Moreover, natural gas with medium-low maturity （e.g., Xujiahe Formation natural gas in the Sichuan Basin） presents an apparent reversal at a low-maturity stage, a normal series at a medium -maturity stage, and a reversal tendency again at a high-maturity stage. Finally, we proposed four conditions for preferred tight sandstone gas ＂sweep spots,＂ and illustrated the recoverable reserves, proven reserves, production, and exploration prospects of tight sandstone gas. The geological and geochemical characteristics, origins, sources, and exploration potential of tight sandstone gas in China from our research will be instructive for the future evaluation, prediction, and exploration of tight sandstone gas in China and abroad.

Geological characteristics and accumulation mechanisms of the "continuous" tight gas reservoirs of the Xu2 Member in the middle-south transition region,Sichuan Basin,China

＂Continuous＂ tight gas reservoirs are those reservoirs which develop in widespread tight sandstones with a continuous distribution of natural gas. In this paper, we summarize the geological features of the source rocks and ＂＇continuous＂ tight gas reservoirs in the Xujiahe Formation of the middle- south transition region, Sichuan Basin. The source rocks of the Xul Member and reservoir rocks of the Xu2 Member are thick （Xul Member： 40 m, Xu2 Member： 120 m） and are distributed continuously in this study area. The results of drilled wells show that the widespread sandstone reservoirs of the Xu2 Member are charged with natural gas. Therefore, the natural gas reservoirs of the Xu2 Member in the middle-south transition region are ＂continuous＂ tight gas reservoirs. The accumulation of ＂continuous＂ tight gas reservoirs is controlled by an adequate driving force of the pressure differences between source rocks and reservoirs, which is demonstrated by a ＂one-dimensional＂ physical simulation experiment. In this simulation, the natural gas of＂continuous＂ tight gas reservoirs moves tbrward with no preferential petroleum migration pathways （PPMP）, and the natural gas saturation of＂continuous＂ tight gas reservoirs is higher than that of conventional reservoirs.

Prediction of geological characteristics from shield operational parameters by integrating grid search and K-fold cross validation into stacking classification algorithm

This study presents a framework for predicting geological characteristics based on integrating a stacking classification algorithm(SCA) with a grid search(GS) and K-fold cross validation(K-CV). The SCA includes two learner layers: a primary learner’s layer and meta-classifier layer. The accuracy of the SCA can be improved by using the GS and K-CV. The GS was developed to match the hyper-parameters and optimise complicated problems. The K-CV is commonly applied to changing the validation set in a training set. In general, a GS is usually combined with K-CV to produce a corresponding evaluation index and select the best hyper-parameters. The torque penetration index(TPI) and field penetration index(FPI) are proposed based on shield parameters to express the geological characteristics. The elbow method(EM) and silhouette coefficient(Si) are employed to determine the types of geological characteristics(K) in a Kmeans++ algorithm. A case study on mixed ground in Guangzhou is adopted to validate the applicability of the developed model. The results show that with the developed framework, the four selected parameters, i.e. thrust, advance rate, cutterhead rotation speed and cutterhead torque, can be used to effectively predict the corresponding geological characteristics.

Geological and Geochemical Characteristics and Genesis of the Shaxi Porphyry Copper (Gold) Deposits, Anhui Province

The Shaxi porphyry copper (gold) deposits are a typical example of porphyry copper deposits associated with diorite in eastern China. Quartz diorite, which hosts the deposits, has a Rb-Sr isochron age of 127.9 ± 1.6 Ma. Geochemically, the rock is rich in alkalis (especially sodium), light rare earth elements (LREE) and large-ion lithophile elements (LILE), and has a relatively low initial strontium isotopic ratio (Isr=0.7058); thus it is the product of differentiation of crust-mantle mixing source magma. The model of alteration and mineralization zoning is similar to the Hollister (1974) diorite model. The ore fluids have a relatively high salinity and contain significant amounts of CO2, Ca2+, Na+ and ***CI?. The homogenization temperatures of fluid inclusions for the main mineralization stage range from 280 to 420°C, the δ18O values of the ore fluids vary from 3.51 to 5.52 %, the δD values are in the range between ?82.4 and ?59.8 %, the δ34S values of sulphides vary from ?0.3 to 2.49 %, and the δ13C values of CO2 in inclusions range between ?2.66 and ?6.53 %. Isotope data indicate that the hydrothermal ore fluids and ore substances of the Shaxi porphyry copper (gold) deposits were mainly derived from magmatic systems.

Geological and geochemical characteristics of Middle Jurassic granites in Bengbu uplift, Southeast of North China craton

1 Introduction The early formation and evolution of the North China craton has been widely concerned by scientists.The Bengbu uplift belt is located in the southeast of the craton,theresearch degree of the belt is relatively low and received increasing attention from many scholars in recent years.Through the author’s practical work and combined with

Geological characteristics and genesis of subbottom pinnoite deposit of Da Qaidam salt lake in Qaidam Basin

Da Qaidam salt lake is known for its both liquid and solid boron resource.Data from previous investigation of the Da Qaidam salt lake provided a comparable framework for this study that focused on investigating the section beneath the bottom of the perennial salt lake,including the timing,

Geological characteristics and the origin of ore-forming materials of(Laozhaiwan gold deposit, Yunnan Province

"Golden triangle"area bordered on Yunnan-Guizhou-Guangxi was one of the most important Carlin-type gold deposits concentration areas.Deep understanding of Carlin-type gold deposits in Guizhou and Guangxi Province had reached through several decades studies,but geological environment was very complex in the southeastern Yunnan,and Carlin-type gold deposits produced in the southeastern Yunnan were different from that of America,few studies were taken there.Based on a large number of field work,studies on the geological characteristics combining with geochemistry characteristics were taken,and analysis the genesis of Laozhaiwan gold deposit.The types of alteration in Laozhaiwan gold deposit were mainly silicification and pyritization,and Gold grade was high when silicification and pyritization were both occurred.It could be caculated that fluid density(g/cm3)varied from 0.7 to 4.9,salinity varied from 0.76%to 0.95%and ore-forming pressure(Pa)varied from 1.81×105 to 49.96×105 according to fluid inclusion test results,showed that Laozhaiwan gold deposit was hypabyssal hydrothermal deposit in low temperature and low salinity.According to composition of fluid inclusion analysis,combining with H-O isotope,made theδD-δ18O figure,showed that the fluid of the deposit rooted in formation water and mixed with meteoric waters later.

Geological Characteristics of Potassium-Bearing Salt Layers in the Well Block Quele of the Kuqa Depression and their Significance

Potash is one of the long-term scare deposits in China,and potash prospecting has long been listed as a key brainstorm project for our nation and geological prospecting units.There have been considerable studies in search for potash deposits in the Kuqa depression of the Tarim basin(Jackson et al.,1991;Gemmer et al.,2004;Vendeville,2005;Vendeville and Jackson,1992a,1992b),

Geochemical characteristics and geological significance of picritic rocks in Permian Tiaohu Formation from Santanghu Basin, Xinjiang, NW China

1 Introduction Santanghu Basin is located between the Armantai and Karamaili suture zone,at the junction of the Siberia,Kazakhstan and Tarim plates(Chen and Jahn,2004;Xiao et al.,2008).As an important part of the Central Asian

Types and Characteristics of Volcanostratigraphic Boundaries and Their Oil-Gas Reservoir Significance

Just like in sedimentary stratigraphy, the factor for constructing volcanostratigraphic volcanostratigraphic boundary is an important framework. The fundamental factor of volcanostratigraphic boundaries is to classify the types and define their characteristics. Based on field investigation and cross-wells section analysis of Mesozoic volcanostratigraphy in NE China, 5 types of volcanostratigraphic boundaries have been recognized, namely eruptive conformity boundary （ECB）, eruptive unconformity boundary （EUB）, eruptive interval unconformity boundary （EIUB）, tectonic unconformity boundary （TUB） and intrusive contacts boundary （ICB）. Except ICB, the unconformity boundaries can be divided into angular unconformity and paraconformity. The time spans and signs of these boundaries are analyzed by using age data of some volcanic fields that have been published. The time spans of ECB and EUB are from several minutes to years. In lava flows, cooling crust is distributed above and below ECB and EUB; in pyroclastic flows, airfalls and lahars, a fine layer below these boundaries has no discernable erosion at every part of the boundary. EUB may be curved or cross curved and jagged. The scale of ECB/EUB is dependent on the scale of lava flow or pyroclastic flows. The time span of EIUB is from decades to thousands of years. There is also weathered crust under EIUB and sedimentary rock beds overlie EIUB. In most instances, weathered crust and thin sedimentary beds are associated with each other laterally. The boundary is a smooth curved plane. The scale of EIUB is dependent on the scale of the volcano or volcano groups. The characteristics of TUB are similar to EIUB＇s. The time interval of TUB is from tens of thousands to millions of years. The scale of TUB depends on the scale of the basin or volcanic field. Both the lab data and logging data of wells in the Songliao Basin reveal that the porosity is greatly related to the boundaries in the lava flows. There is a high-porosity belt below ECB, EUB or EIUB, and the porosity decreases when it is apart from the boundary. The high-porosity belt below ECB and EUB is mainly contributed by primary porosity, such as vesicles. The high-porosity belt below EIUB is mainly contributed by primary and secondary porosity, such as association of vesicles and spongy pores, so the area near the boundary in lava flows is a very important target for reservoirs.

Geological Conditions and Prospect Forecast of Shale Gas Formation in Qiangtang Basin, Qinghai-Tibet Plateau

The presence of shale gas has been confirmed in almost every marine shale distribution area in North America.Formation conditions of shale gas in China are the most favorable for marine,organic-rich shale as well.But there has been little research focusing on shale gas in Qiangtang Basin,Qinghai-Tibet Plateau,where a lot of Mesozoic marine shale formations developed.Based on the survey results of petroleum geology and comprehensive test analysis data for Qinghai-Tibet Plateau,for the first time,this paper discusses characteristics of sedimentary development,thickness distribution,geochemistry,reservoir and burial depth of organic-rich shale,and geological conditions for shale gas formation in Qiangtang Basin.There are four sets of marine shale strata in Qiangtang Basin including Upper Triassic Xiaochaka Formation （T3x）,Middle Jurassic Buqu Formation （J2b）,Xiali Formation （J2x） and Upper Jurassic Suowa Formation （J3s）,the sedimentary types of which are mainly bathyal-basin facies,open platform-platform margin slope facies,lagoon and tidal-fiat facies,as well as delta facies.By comparing it with the indicators of gas shale in the main U.S.basins,it was found that the four marine shale formations in Qiangtang Basin constitute a multi-layer distribution of organic-rich shale,featuring a high degree of thickness and low abundance of organic matter,high thermal evolution maturity,many kinds of brittle minerals,an equivalent content of quartz and clay minerals,a high content of feldspar and low porosity,which provide basic conditions for an accumulation of shale gas resources.Xiaochaka Formation shale is widely distributed,with big thickness and the best gas generating indicators.It is the main gas source layer.Xiali Formation shale is of intermediate thickness and coverage area,with relatively good gas generating indicators and moderate gas formation potential.Buqu Formation shale and Suowa Formation shale are of relatively large thickness,and covering a small area,with poor gas generating indicators,and limited gas formation potential.The shale gas geological resources and technically recoverable resources were estimated by using geologic analogy method,and the prospective areas and potentially favorable areas for Mesozoic marine shale gas in Qiangtang Basin are forecast and analyzed.It is relatively favorable in a tectonic setting and indication of oil and gas,shale maturity,sedimentary thickness and gypsum-salt beds,and in terms of mineral association for shale gas accumulation.But the challenge lies in overcoming the harsh natural conditions which contributes to great difficulties in ground engineering and exploration,and high exploration costs.

Heterogeneous geological conditions and differential enrichment of medium and high maturity continental shale oil in China

Based on the comparison of basic geological conditions and enrichment characteristics of shale oil plays, the heterogeneity of source and reservoir conditions and differential enrichment of medium-high maturity continental shale oil plays in China have been confirmed.(1) Compared with the homogeneous geological settings and wide distribution of marine shale oil strata in North America, the continental medium and high maturity shale oil plays in China are significantly different in geological conditions generally;continental multi-cyclic tectonic evolution forms multiple types of lake basins in multi-stages, providing sites for large-scale development of continental shale oil, and giving rise to large scale high-quality source rocks, multiple types of reservoirs, and diverse source-reservoir combinations with significant heterogeneity.(2) The differences in sedimentary water environments lead to the heterogeneity in lithology, lithofacies, and organic material types of source rocks;the differences in material source supply and sedimentary facies belt result in reservoirs of different lithologies, including argillaceous and transition rocks, and tight siltstone, and complex source-reservoir combination types.(3) The heterogeneity of the source rock controls the differentiation of hydrocarbon generation and expulsion, the diverse reservoir types make reservoir performance different and the source-reservoir configurations complex, and these two factors ultimately make the shale oil enrichment patterns different. Among them, the hydrocarbon generation and expulsion capacity of high-quality source rocks affect the degree of shale oil enrichment. Freshwater hydrocarbon source rocks with TOC larger than 2.5% and saline hydrocarbon source rocks with TOC of 2% to 10% have a high content of retained hydrocarbons and are favorable.(4) High-abundance organic shale is the basis for the enrichment of shale oil inside the source. In addition to being retained in shale, liquid hydrocarbons migrate along laminae, diagenetic fractures, and thin sandy layers, and then accumulate in laminae of argillaceous siltstone, siltstone, and argillaceous dolomite, and dolomitic siltstone suites, etc. with low organic matter abundance in the shale strata, resulting in differences in enrichment pattern.

Development of unconventional gas and technologies adopted in China

This study analyses the geological characteristics and development progress of unconventional gas in China,summarizes the development theories and technologies,discusses the prospects and challenges of unconventional gas development,and puts forward the future trends of development technologies.Various technologies of unconventional gas development are available in China.Shale gas development technologies include comprehensive geological evaluation,volume fracturing of cluster horizontal wells under complex stress conditions,and factory-like operation of horizontal wells in complex mountainous area et al.Tight gas development technologies include fluid identification and quantitative prediction,optimization of well patterns,multi-layer fracturing in vertical well,staged fracturing in horizontal well,and drainage gas recovery.Coalbed methane(CBM)development technologies include the prediction of medium-high-and medium-low-rank CBM enrichment areas,rate-variable hydraulic fracturing,and quantitative drainage recovery with five stages,three pressures,and four controls.For economic and effective development of unconventional gas,further efforts should be made.First,intensified studies should be conducted on high-precision prediction and fine characterization technologies of high-quality shale reservoirs in deep marine,continental,and transitional facies.Second,key theories and technologies such as fast drilling and completion of wells with long laterals as well as large-scale volume fracturing should be developed to improve well productivity.Third,new technologies such as multiple well-type development,fluid injection,and nano-flooding should be developed to enhance the recovery.Fourth,effort should be made to identify the accumulation mechanism and large-scale effective development technologies for CBM.Fifth,the application of large amounts of data and artificial intelligence in the entire process of unconventional gas development should be considered to reduce the development cost.

An overview of the geology and production of the Fuling shale gas field,Sichuan Basin,China

The Fuling shale gas field in China is the largest shale gas field as well as the largest of its type discovered in any Lower Paleozoic formation.In this study,the geology and production of the upper and lower gas layers in the Fuling shale gas field are evaluated in terms of structure,shale quality,fault,initial production,and estimated ultimate recovery(EUR).The shale in the lower gas layer of the Jiaoshiba anticline is a high-quality reservoir,where the space is dominated by organic pores in kerogen,and the gas content is high.The shale gas wells reveal relatively high initial production and EUR.However,the shale in the upper gas layer of the Jiaoshiba anticline has reservoir space mainly composed of clay mineral pores and organic pores within bitumen,and the gas content is low.In terms of structure,primary gas migration may occur in the upper gas layer,resulting in free gas accumulation in the structural high,where the development effects are generally better than those in the structural low.The lower gas layer in the Pingqiao anticline,is the main interval for shale gas accumulation and development due to the high-quality shale.Under the influence of faults,the efficiency of exploration wells emplaced on top of the anticline is much lower a compared with those in the flanks.The residual synclines close to the Sichuan Basin,including the Baima and Baitao anticlines,are characterized by more recent uplifts,larger area,greater distance from the deep and large faults,and early fracture closure.Therefore,we recommend that the shale gas exploration and development should be carried out preferentially in areas close to the center of the residual synclines,featuring relatively high-pressure coefficient and moderate burial depth.

Resource Potential and Exploration Techniques of Stratigraphic and subtle Reservoirs in China

The onshore oil and gas exploration has stepped into a new stage in China, with equal attention paid to both stratigraphic and subtle reservoirs and structural reservoirs. In the past few years, the increases in oil reserves in most basins were found mainly in the stratigraphic and subtle reservoirs. Latest resource evaluation shows that the onshore stratigraphic and subtle reservoirs in China account for 42% of the total remaining resource, the highest in the four major exploration regions. Therefore, these reservoirs will be the most practical, potential and prevalent fields for long-lasting oil and gas exploration in onshore China. Among PetroChina's annual oil geologic reserves of 4.3 × 108t^4.6× 108t, the stratigraphic and subtle reservoirs account for more than 50%. In such basins as Songliao, Ordos, Bohai Bay, Junggar, Tarim, Sichuan and Erlian basins, stratigraphic and subtle reservoirs with geologic reserves ranging from 5×107t to 3×108t were discovered, including Ansai, Jing'an, Daqingzijing, Liuxi, well-21 area in Shinan, and Hadexun. Stratigraphic and subtle reservoirs in the four types of inland basins differ from each other in the formation conditions and the distribution patterns. While continental basins are controlled by unconformity surface, maximum flooding surface and fracture surface, the Paleozoic marine basins are influenced by paleouplift, unconformity surface, and fluctuation of the sea level. Through exploration practices and research, PetroChina has formed its own technique series focused on 3-D seismics and sequence stratigraphy.

Hard rock tunnel boring machine penetration test as an indicator of chipping process efficiency

The transition from grinding to chipping can be observed in tunnel boring machine(TBM) penetration test data by plotting the penetration rate(distance/revolution) against the net cutter thrust(force per cutter) over the full range of penetration rates in the test.Correlating penetration test data to the geological and geomechanical characteristics of rock masses through which a penetration test is conducted provides the ability to reveal the efficiency of the chipping process in response to changing geological conditions.Penetration test data can also be used to identify stress-induced tunnel face instability.This research shows that the strength of the rock is an important parameter for controlling how much net cutter thrust is required to transition from grinding to chipping.It also shows that the geological characteristics of a rock will determine how efficient chipping occurs once it has begun.In particular,geological characteristics that lead to efficient fracture propagation,such as fabric and mica contents,will lead to efficient chipping.These findings will enable a better correlation between TBM performance and geological conditions for use in TBM design,as a basis for contractual payments where penetration rate dominates the excavation cycle and in further academic investigations into the TBM excavation process.