An Expression for Gravity Generated by an Anomalous Geological Body and Its Application in Bathymetry Inversion

The gravity anomaly and vertical gravity gradient due to anomalous geological bodies are mainly computed by numerical methods,so it is difficult and time-consuming to use the gravity-geological method to invert seafloor topography.This paper addresses this issue by deriving an expression for gravity generated by a cylinder based on a series expansion.The choice of number for terms in the series is estimated by comparing with the numerical method,especially when the depth H=4000m,the accuracy of 1 mGal(1 Gal=10^(-2)m/s^(2))can be achieved when the series are 9.The expressions can be used to establish the relationships between the shape of an anomalous body and the generated vertical gravity and vertical gravity gradient,respectively.Finally,the potential applications of the expressions in inverting seafloor topography are illustrated by synthetic examples.

“Extreme utilization” theory and practice in gas storages with complex geological conditions

Based on more than 20-year operation of gas storages with complex geological conditions and a series of research findings, the pressure-bearing dynamics mechanism of geological body is revealed. With the discovery of gas-water flowing law of multi-cycle relative permeability hysteresis and differential utilization in zones, the extreme utilization theory targeting at the maximum amount of stored gas, maximum injection-production capacity and maximum efficiency in space utilization is proposed to support the three-in-one evaluation method of the maximum pressure-bearing capacity of geological body, maximum well production capacity and maximum peak shaving capacity of storage space. This study realizes the full potential of gas storage(storage capacity) at maximum pressure, maximum formation-wellbore coordinate production, optimum well spacing density match with finite-time unsteady flow, and peaking shaving capacity at minimum pressure, achieving perfect balance between security and capacity. Operation in gas storages, such as Hutubi in Xinjiang, Xiangguosi in Xinan, and Shuang6 in Liaohe, proves that extreme utilization theory has promoted high quality development of gas storages in China.

Cybernetics of Engineering Geological Bodies

ＣｙｂｅｒｎｅｔｉｃｓｏｆＥｎｇｉｎｅｅｒｉｎｇＧｅｏｌｏｇｉｃａｌＢｏｄｉｅｓＢｙＬｉａｎｇＪｉｏｎｇｊｉｕｎ；ＨｕａｎｇＤｉｎｇｃｈｅｎｇ；ＸｉｎｇＮｉａｎｘｉｎｉａｎｄＬｉｎＸｕａｎｑｉｎｇ（ＩｎｓｌｉｔｕｔｅｏｆＤｅｓｉｇｎａｎｄＲｅｓｅａｒ...

Highlighting display of geologic bodies based on directivity filtering

To make a geologic body more outstanding, it is necessary to preserve edges when filtering. For this reason, a filtering method based on anisotropic diffusion is introduced. The key point of this method is that diffusion filtering will be made along the edge while diffusion is forbidden in the direction perpendicular to the edge, so the filtering has directionality. When doing anisotropic diffusion filtering, parameters like diffusion coefficient and threshold have great impacts on the results, so the anisotropic diffusion model parameters are discussed, the diffusion coefficient equation is introduced, and the diffusion threshold selection criterion is derived and analyzed. In addition, this method was used with the diffusion coefficient equation＇s proper diffusion threshold to highlight the tidal channel geobodies in the XX area, sand body in the YY area, and faults in the ZZ area. The good delineation results prove that the diffusion threshold selection criterion introduced in this paper is reasonable.

Study on the scales of heterogeneous geologic bodies in random media

In order to study the scale characteristics of heterogeneities in complex media, a random medium is constructed using a statistical method and by changing model parameters （autocorrelation lengths a and b）, the scales of heterogeneous geologic bodies in the horizontal and the vertical Cartesian directions may be varied in the medium. The autocorrelation lengths a and b represent the mean scale of heterogeneous geologic bodies in the horizontal and vertical Cartesian directions in the randQm medium, respectively. Based on this model, the relationship between model autocorrelation lengths and heterogeneous geologic body scales is studied by horizontal velocity variation and standard deviation. The horizontal velocity variation research shows that velocities are in random perturbation. The heterogeneous geologic body scale increases with increasing autocorrelation length. The recursion equation for the relationship between autocorrelation lengths and heterogeneous geologic body scales is determined from the velocity standard deviation research and the actual heterogeneous geologic body scale magnitude can be estimated by the equation.

From the new Austrian tunneling method to the geoengineering condition evaluation and dynamic controlling method

The new Austrian tunneling method （NATM） is widely applied in design and construction of underground engineering projects. When the type and distribution of unfavorable geological bodies （UGBs） associated with their influences on geoengineering are complicated or unfortunately are overlooked, we should pay more attentions to internal features of rocks grades IV and V （even in local but mostly controlling zones）. With increasing attentions to the characteristics, mechanism and influences of engineering construction-triggered geohazards, it is crucial to fully understand the disturbance of these geohazards on project construction. A reasonable determination method in construction procedure, i.e. the shape of working face, the type of engineering support and the choice of feasible procedure, should be considered in order to mitigate the construction-triggered geohazards. Due to their high sensitivity to groundwater and in-situ stress, various UGBs exhibit hysteretic nature and failure modes. To give a complete understanding on the internal causes, the emphasis on advanced comprehensive geological forecasting and overall reinforcement treatment is therefore of more practical significance. Compre- hensive evaluation of influential factors, identification of UGB, and measures of discontinuity dynamic controlling comprises the geoengineering condition evaluation and dynamic controlling method. In a case of a cut slope, the variations of UGBs and the impacts of key environmental factors are presented, where more severe construction-triggered geohazards emerged in construction stage than those predicted in design and field investigation stages. As a result, the weight ratios of different influential factors with respect to field investigation, design and construction are obtained.

Tectonic evolution and the analysis of unfavorable geology in a tunnel

Based on the theory of geomechanics and using geologic analytical methods,analyed the fault characteristics, mechanical properties, displacement mode, tectonic system, structural pattern, activity mode of stress, tectonic activity, and tectonic evolution ofthe area of the Xiamen submarine tunnel, the strike NWW 295^(。), which is the main unfavorable geological structure that affects the safety of the tunnel construction; the macrogeological prediction concludes that weathered troughs and groundwater-rich zonesformed by its larger-scale fault fracture zones are the main unfavorable geological bodiesprovides a basis for preventing the geo-logical hazards in the tunnel construction.

Recognition and depiction of special geologic bodies of Member 3 of Dongying Formation in Littoral Slope Zone,Qikou Sag

The purpose of this study is to forecast the profitable oil and gas reservoir,which is the key of finding hydrocarbon,based on the conception of special geologic bodies.With the guiding methodology of the research thinking of integration of point-line-surface by using the methods and techniques of logging,seismic,seismic attribute,and logging constrained inversion in 3D data volume,the special geologic bodies of Member 3 of Dongying Formation in Littoral Slope Zone of Qikou Sag,which has important hydrocarbon exploration potential,are recognized and described under the constraint of sequence stratigraphic framework.As a result,the developed scale,geometric shape and space distribution feature of the special geologic bodies are forecasted;the inner structure and sequence structure patterns of the geologic bodies are also ascertained.From the lowstand system tract (LST) and lacustrine expanding system tract (EST) to the highstand system tract (HST),the geologic bodies have evolved from relative centralization of lake basin reducing period to three relative dispersive isolated parts of broad lake basin period.According to the relevance and regularity of the development of geologic bodies,the conclusions can be obtained that three types of potential profitable reservoir traps,including the lithologic lens traps,lithologic updip pinchout traps and structural-lithologic composite traps,are forecasted.In addition,scientific basis for further hydrocarbon exploration in new area (few-well area and no-well area) is offered in the guidance of sequence stratigraphic model.

Architecture of Sandstone Bodies of Paleogene Shahejie Formation in Northern Qikou Sag, Northeast China

The conception of special geologic bodies has been applied in this study to define and illustrate economic oil and gas reservoirs in sandbodies, which is helpful for hydrocarbon forecast and exploration. Using the comprehensive analysis of drilling, logging, seismic, seismic attribute extraction, and logging constrained inversion in 3D data volume, the special geologic bodies of the Shahejie Formation（Ps^1s） in northern Qikou sag, which have good hydrocarbon potential, are identified and described under the constraint of sequence stratigraphic framework. The dimensions, geometry, and spatial distribution features of the special geologic bodies, as well as their inner architectures and sequence-structure patterns, are also ascertained. The geologic bodies evolved from relative centralization in the middle part of the lacustrine basin in the early stage of Ps1~s Formation, to several dispersive isolated parts in the later stage. This shows a small cycle interval（~2.5 Ma） at the end of the whole transgressive depositional process of Ps1（~7.5 Ma） during the expansion of the lake and relative lake level rise, with the control of sediments supply and fault-related subsidence, which effect the evolution of the sedimentary system. According to the relevance and regularity of the geologic bodies＇ development, different types of potential profitable reservoir traps, including the lithologic lenticular traps, lithologic updip pinchout traps, and structural-lithologic composite traps, can be preserved in the study area. In addition, the internal architecture models provide scientific basis for further hydrocarbon exploration in the frontier basin without enough data.