JC/T 494-92(96) 1 ScopeThis standard specifies the technical requirements, test methods, inspection rules, marking, packing, transportation, and storage of fused cast alumina refractory products for glass melting furn...JC/T 494-92(96) 1 ScopeThis standard specifies the technical requirements, test methods, inspection rules, marking, packing, transportation, and storage of fused cast alumina refractory products for glass melting furnace. This standard is applicable to the fused cast alumina refractory products for glass melting furnace (called products for short).2 Normative ReferencesGB 2997 Test method for apparent porosity, water absorption, bulk density and true porosity of dense shaped refractory productsGB 5072 Test method for cold crushing strength of dense shaped refractory productsGB 5989 Test method for refractoriness under load of dense shaped refractory products (Differential, with rising temperature)GB 7320 Test method for thermal expansion of refractory productsGB 10204 Test method for corrosion resistance of refractories for glass melting furnace to molten glassGB 10325 Stacking, sampling, acceptance, storage and transportation of shaped refractory productsGB 10326 Inspections of dimension, appearance and section of refractory productsGB/T 14351 Chemical analysis method of fused cast alumina refractoriesYB 4015 Sample preparation for testing of refractory products for glass melting furnaceYB 4016 Sampling and inspection of refractory products for glass melting furnaceJC 493 Fused cast zirconia corundum refractory products for glass melting furnace展开更多
1 Subject and Scope The standard specifies the requirement, testing method, inspection rule and requirements for the labeling, packing, shipping and storing of the fused cast alumina refractory products for glass tanks.
An innovative in-flight glass melting technology with induced thermal plasmas was developed for the purpose of energy conservation and environmental protection. Two-dimensional modeling was used to simulate the thermo...An innovative in-flight glass melting technology with induced thermal plasmas was developed for the purpose of energy conservation and environmental protection. Two-dimensional modeling was used to simulate the thermofluid fields in the plasma torch. The in-flight melting behavior of glass raw material was investigated by various analysis methods. Results showed that the plasma temperature was up to 10000 K with a maximum velocity over 30 m/s, which made it possible to melt the granulated glass raw material within milliseconds. The carbonates in the raw material decomposed completely and the compounds in the raw material attainted 100% vitrification during the in-flight time from the nozzle exit to substrate. The particle melting process is similar to the unreacted-core shrinking model.展开更多
An innovative in-flight glass melting technology with a multi-phase AC arc plasma was developed to save energy and reduce emissions for the glass industry. The effect of the injection position on the in-flight melting...An innovative in-flight glass melting technology with a multi-phase AC arc plasma was developed to save energy and reduce emissions for the glass industry. The effect of the injection position on the in-flight melting behavior of granulated powders was investigated. Results show that the injection position has a strong effect on the melting behavior of alkali-free glass raw material. With the increase in injection distance, the vitrification, decomposition, and particle shrinkage of initial powders are improved. Longer injection distance causes much energy to transfer to particles due to a longer residence time of powder in the high temperature zone. The high vitrification and decomposition degrees indicate that the new in-flight melting technology with 12-phase AC arc can substantially reduce the melting and refining time for glass production.展开更多
On July 16, 2013, the first low-E energy saving glass deep processing line of Hubei Zhongyi Glass Co., Ltd. was put into production in Changyang County of Hubei Province. Low-E glass is a kind of new glass featured wi...On July 16, 2013, the first low-E energy saving glass deep processing line of Hubei Zhongyi Glass Co., Ltd. was put into production in Changyang County of Hubei Province. Low-E glass is a kind of new glass featured with good lighting, thermal insulation, and ultraviolet radiation resistance. So far contracts worth about CNY 50 million have been signed.展开更多
文摘JC/T 494-92(96) 1 ScopeThis standard specifies the technical requirements, test methods, inspection rules, marking, packing, transportation, and storage of fused cast alumina refractory products for glass melting furnace. This standard is applicable to the fused cast alumina refractory products for glass melting furnace (called products for short).2 Normative ReferencesGB 2997 Test method for apparent porosity, water absorption, bulk density and true porosity of dense shaped refractory productsGB 5072 Test method for cold crushing strength of dense shaped refractory productsGB 5989 Test method for refractoriness under load of dense shaped refractory products (Differential, with rising temperature)GB 7320 Test method for thermal expansion of refractory productsGB 10204 Test method for corrosion resistance of refractories for glass melting furnace to molten glassGB 10325 Stacking, sampling, acceptance, storage and transportation of shaped refractory productsGB 10326 Inspections of dimension, appearance and section of refractory productsGB/T 14351 Chemical analysis method of fused cast alumina refractoriesYB 4015 Sample preparation for testing of refractory products for glass melting furnaceYB 4016 Sampling and inspection of refractory products for glass melting furnaceJC 493 Fused cast zirconia corundum refractory products for glass melting furnace
文摘1 Subject and Scope The standard specifies the requirement, testing method, inspection rule and requirements for the labeling, packing, shipping and storing of the fused cast alumina refractory products for glass tanks.
基金the New Energy and Industrial Technology Development Organization of Japan(No.A0006)
文摘An innovative in-flight glass melting technology with induced thermal plasmas was developed for the purpose of energy conservation and environmental protection. Two-dimensional modeling was used to simulate the thermofluid fields in the plasma torch. The in-flight melting behavior of glass raw material was investigated by various analysis methods. Results showed that the plasma temperature was up to 10000 K with a maximum velocity over 30 m/s, which made it possible to melt the granulated glass raw material within milliseconds. The carbonates in the raw material decomposed completely and the compounds in the raw material attainted 100% vitrification during the in-flight time from the nozzle exit to substrate. The particle melting process is similar to the unreacted-core shrinking model.
基金supported by the New Energy and Industrial Technology Development Organization of Japan and the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry of China
文摘An innovative in-flight glass melting technology with a multi-phase AC arc plasma was developed to save energy and reduce emissions for the glass industry. The effect of the injection position on the in-flight melting behavior of granulated powders was investigated. Results show that the injection position has a strong effect on the melting behavior of alkali-free glass raw material. With the increase in injection distance, the vitrification, decomposition, and particle shrinkage of initial powders are improved. Longer injection distance causes much energy to transfer to particles due to a longer residence time of powder in the high temperature zone. The high vitrification and decomposition degrees indicate that the new in-flight melting technology with 12-phase AC arc can substantially reduce the melting and refining time for glass production.
文摘On July 16, 2013, the first low-E energy saving glass deep processing line of Hubei Zhongyi Glass Co., Ltd. was put into production in Changyang County of Hubei Province. Low-E glass is a kind of new glass featured with good lighting, thermal insulation, and ultraviolet radiation resistance. So far contracts worth about CNY 50 million have been signed.