Relativistic Effects in the Global Positioning System

The Global Positioning System (GPS) uses accurate atomic clocks in satellites and on the ground to provide world-wide position and time determination. These clocks have gravitational and motional frequency shifts which are so large that, without properly accounting for relativistic effects, the system would not work. As a practical matter, therefore, many individuals who use the GPS need to understand how relativistic effects accounted for in the system. This paper discusses relativistic effects arising from both special relativity and general relativity, and how these effects are incorporated in GPS operations. Two introductory sections on kinematics in special and general relativity, respectively, are followed by a section which describes how relativistic effects should be accounted for. The concept of synchroization in the Earth-Centered Inertial frame is discussed in detail. Numerical and experimental examples are given, showing the sizes of the various effects. The treatment of special and general relativity is sufficiently complete that a person should be able to follow the development without much reference to external material, except that a few standard results have been quoted from textbooks without derivation.

Modeling of Selective Availability for Global Positioning System

To degrade location accuracy for unauthorized GPS users, US government applied Selective Availability (SA) to Global Positioning System (GPS). In this paper we discuss an anti-SAapproach to improve location accuracy which is very important in landing position, and then we derived the SA error by eliminating almost all other errors including ionospheric and tropospheric timedelays and clock errors both in satellites and in receiver, etc. By means of the system identificationtheory, an SA errorl all SA error model with the second-order Gauss-Maukov stochastic process wasderived and simulated. With the selected parameters of the stochastic process) the simulation resultsshow that there is the excellent agreement between the simulated SA error model and that of reallyapplied in GPS system.

Locating Global System for Mobile Communication(GSM)Base Stations Using Geographic Information System(GIS)

The global system for mobile communication(GSM)is planned to meet the needs of the whole subscribers.The number of subscribers increased as the population increased due to the acceptance of GSM services by the subscribers.Thus,there should be a way to monitor base stations that will meet the increasing demand of subscribers in any area as a population surge will lead to more subscriptions.This will allow GSM network operators to serve their subscribers better and ease network congestion.This work presents a review of mobile evolution from the first generation to the fifth generation.A review of global positioning system(GPS)technology and its applications to geographic information systems(GIS)was done.The coordinates of these base stations were taken using a GPS device.These base station coordinates were then exported to QGIS for the design of the map.Thereafter,the output map was then integrated into the website.The discussions on the results followed and some useful suggestions given will go a long way to help the operators of GSM in Nigeria and in general.If the propositions given are adhered to,it will go a long way to help the operators reduce congestion on their network and thereby increase the satisfaction of the subscribers.

Applying Global Positioning System Real-Time Kinematic Technology to Collection and Analysis of Rowing Information

To obtain higher accuracy of information concerning boat motion, the use of global positioning system (GPS) real-time kinematic (RTK) technology was investigated. Through RTK technology, a measurement precision of the ±1 cm range can be achieved. The research equipment included a GPS receiver and a personal digital assistant as a data control and processing unit. Real-time GPS data was captured and processed to acquire various parameters, including the boat track, velocity curve, stroke rate, and stroke distance. Using this data, the quantitative information related to rowing training can be achieved. The results are helpful for analyzing the biomechanical parameters of rowing techniques and for evaluating training efficiency.

Absolute and relative sea-level rise in the New York City area by measurements from tide gauges and satellite global positioning system

The absolute and relative rates of rise of the sea level are computed for the New York City area by coupling global positioning system records of the position of fixed domes nearby tide gauges,with the tide gauges’records.Two tide gauges are considered,one long-term trend,more reliable,The Battery,in lower Manhattan,and one shorter,less reliable,Sandy Hook,in New Jersey.The relative rates of rise of the sea level are+2.851 and+4.076 mm/yr.The subsidence rates are-2.151 and-3.076 mm/yr.The absolute rates of rise of the sea level are+0.7 and+1.0 mm/yr.The relative sea-level acceleration,reliable only in The Battery,is about+0.008 mm/yr².This acceleration is about the same as the world average long-term trend tide gauge,as well as the average long-term trend tide gauge of the East Coast of North America.The absolute rate of rise of the sea level by 2050 in the lower Manhattan area will be likely less than 30 mm,and the absolute rate of rise of the sea level by 2100 likely less than 80 mm.The relative rate of rise of the sea level by 2050 in the Manhattan area will be likely 85 mm,and the relative rate of rise of the sea level by 2100 likely 228 mm,because of the overwhelming subsidence contribution.

Remote positioning system based on GPS/GPRS

Considering the need of target positioning,a remote positioning system is designed based on global positioning system(GPS)and general packet radio service(GPRS);The data collection terminal is based on microcontroller unit(MCU)PIC24FV301.It uses GPRS network to create wireless link and transmits GPS source information which is collected by LEA-5H board to monitor center on the Internet.The monitor center obtains the target information through processing and analysis of the calculated data.Actual operation results indicate that the designed system has excellent performance and achieves the goal of the remote location.

Analysis of Geo Positioning System Using RF &DA

Indoor positioning systems (IPSs) have been intended to provide position information of persons and devices. Higher user percentage of handheld devices such as tablets or mobile phones had led to the development of a number of indoor positioning systems. In this research a work on a real time portable RFID indoor positioning device such as on smartphone will be performed. The personal networks will be designed to meet the users’ needs and interconnect users’ devices equipped with different communications technologies in various places to form one network for better result. Radio frequency identification (RFID) with directional antenna has proved its potential for locating objects in indoor environment. Hence, the proposed device idea will be used to exploit various unknown locations in an indoor environment such as college campus;this interpretation will rely on Wireless LAN, Received Signal Strength values from Access Points (AP) in specific mentioned arenas;these APs will be monitored constantly by RFID with directional antenna (DA) and handheld devices. For obtaining the better results from existing devices, algorithms of Range Estimation are proposed, which can be used on various handheld devices for locating indoor objects.

Rapid Fault Analysis by Deep Learning-Based PMU for Smart Grid System

Smart Grids(SG)is a power system development concept that has received significant attention nationally.SG signifies real-time data for specific communication requirements.The best capabilities for monitoring and controlling the grid are essential to system stability.One of the most critical needs for smart-grid execution is fast,precise,and economically synchronized measurements,which are made feasible by Phasor Measurement Units(PMU).PMUs can pro-vide synchronized measurements and measure voltages as well as current phasors dynamically.PMUs utilize GPS time-stamping at Coordinated Universal Time(UTC)to capture electric phasors with great accuracy and precision.This research tends to Deep Learning(DL)advances to design a Residual Network(ResNet)model that can accurately identify and classify defects in grid-connected systems.As part of fault detection and probe,the proposed strategy uses a ResNet-50 tech-nique to evaluate real-time measurement data from geographically scattered PMUs.As a result of its excellent signal classification efficiency and ability to extract high-quality signal features,its fault diagnosis performance is excellent.Our results demonstrate that the proposed method is effective in detecting and classifying faults at sufficient time.The proposed approaches classify the fault type with a precision of 98.5%and an accuracy of 99.1%.The long-short-term memory(LSTM),Convolutional Neural Network(CNN),and CNN-LSTM algo-rithms are applied to compare the networks.Real-world data tends to evaluate these networks.

IAE-adaptive Kalman filter for INS/GPS integrated navigation system

A marine INS/GPS adaptive navigation system is presented. GPS with two antenna providing vessel＇ s altitude is selected as the auxiliary system fusing with INS to improve the performance of the hybrid system. The Kalman filter is the most frequently used algorithm in the integrated navigation system, which is capable of estimating INS errors online based on the measured errors between INS and GPS. The standard Kalman filter （SKF） assumes that the statistics of the noise on each sensor are given. As long as the noise distributions do not change, the Kalman filter will give the optimal estimation. However GPS receiver will be disturbed easily and thus temporally changing measurement noise will join into the outputs of GPS, which will lead to performance degradation of the Kalman filter. Many researchers introduce fuzzy logic control method into innovation-based adaptive estimation adaptive Kalman filtering （IAE-AKF） algorithm, and accordingly propose various adaptive Kalman filters. However how to design the fuzzy logic controller is a very complicated problem still without a convincing solution. A novel IAE-AKF is proposed herein, which is based on the maximum likelihood criterion for the proper computation of the filter innovation covariance and hence of the filter gain. The approach is direct and simple without having to establish fuzzy inference rules. After having deduced the proposed IAEAKF algorithm theoretically in detail, the approach is tested by the simulation based on the system error model of the developed INS/GPS integrated marine navigation system. Simulation results show that the adaptive Kalman filter outperforms the SKF with higher accuracy, robustness and less computation. It is demonstra- ted that this proposed approach is a valid solution for the unknown changing measurement noise exited in the Kalman filter.

The measurement of time spent outdoors in child myopia research： a systematic review

The purpose of this article is to summarize the methods most commonly used to measure time spent outdoors and provide a comprehensive review of time and activity recording methods with the aim of encouraging the development of new methods. PubMed, Embase and the Cochrane Library were searched from Jan. 1st, 1990 to Aug. 31th, 2017. Studies including the following specific terms： “outdoor”, “outside”, “outdoor activity”, “outside activity”, “outdoor time”, “outside time”, and “outdoor AND measurement of time spent outdoors” were considered for this review. In total, three kinds of outdoor time measurements were discussed. Questionnaires have the longest history and are the most thoroughly revised instruments for assessing time spent outdoors, but recall bias is their most substantial drawback. Global positioning system （GPS） tracking can distinguish between indoor and outdoor locations, but its utility is limited due to several factors such as subject compatibility. Light exposure measurement devices are newly emerging, but all of these devices require good subject cooperation. Further efforts and exploration are needed to develop better methods and new tools to record exposure to the outdoors in real time. Moreover, inventing a new device by combining two or more types of devices mentioned above and using the latest technology of en ergy supplementation and autoswitching may make the best use of the advantages and bypass the disadvantages of each tool.

Study on Federated Architecture for GPS/INS/TRN Integrated Navigation System

Based on the information fusion theory, a kind of integrated navigation system integration for cruise missile is presented in this paper. Besides, the way with which the system is integrated and the related data fusion technique are discussed. Information-fusion-based hybrid navigation system integration can fully utilize information provided by all kinds of navigation sensor subsystem and can improve the precision of the system effectively. Simultaneously, the reconstructing ability ensures the system of great reliability.

Driving Style Recognition System Using Smartphone Sensors Based on Fuzzy Logic

Every 24 seconds,someone dies on the road due to road accidents and it is the 8th leading cause of death and the first among children aged 15–29 years.1.35 million people globally die every year due to road traffic crashes.An additional 20–50 million suffer from non-fatal injuries,often resulting in longterm disabilities.This costs around 3%of Gross Domestic Product to most countries,and it is a considerable economic loss.The governments have taken various measures such as better road infrastructures and strict enforcement of motor-vehicle laws to reduce these accidents.However,there is still no remarkable reduction in the number of accidents.To ensure driver safety and achieve vision of zero accidents,there is a great need to monitor drivers’driving styles.Most of the existing driving behavior monitoring solutions are based on expensive hardware sensors.As most people are using smartphones in the modern era,a system based on mobile application is proposed,which can reduce the cost for developing intelligent transport systems(ITS)to a large extent.In this paper,we utilize the accelerometer sensor data and the global positioning system(GPS)sensor deployed in smartphones to recognize driving and speeding events.A driving style recognition system based on fuzzy logic is designed to classify different driving styles and control reckless driving by taking the longitudinal/lateral acceleration and speed as input parameters.Thus,the proposed system uses fuzzy logic rather than taking the crisp values of the sensors.Results indicate that the proposed system can classify reckless driving based on fuzzy logic and,therefore,reduce the number of accidents.

Outdoor position estimation based on a combination system of GPS-INS by using UPF

This paper proposes a technique that global positioning system(GPS)combines inertial navigation system(INS)by using unscented particle filter(UPF)to estimate the exact outdoor position.This system can make up for the weak point on position estimation by the merits of GPS and INS.In general,extended Kalman filter(EKF)has been widely used in order to combine GPS with INS.However,UPF can get the position more accurately and correctly than EKF when it is applied to real-system included non-linear,irregular distribution errors.In this paper,the accuracy of UPF is proved through the simulation experiment,using the virtual-data needed for the test.

Analysis of unmanned aerial vehicle navigation and height control system based on GPS

According to the characteristic of global positioning system（GPS） reflection signals,a GPS delay mapping receiver system scheme is put forward,which not only satisfies the unmanned aerial vehicle（UAV） guidance localization but also realizes height measurement.A code delay algorithm is put forward,which processes the direct and land reflected signal and outputs the navigation data and specular point.The GPS terrain reflected echo signal mathematical equation is inferred.The reflecting signal area,when the GPS signal passes the land,is analyzed.The height survey model reflected land surface characteristic is established.A simulation system which carries guidance localization of the UAV and the height measuring control through the GPS direct signal and the land reflected signal is designed,taken the GPS satellite as the illumination source,the receiver is put on the UAV.Then the UAV guidance signal,the GPS reflection signal and receiver＇s parallel processing are realized.The parallel processing reduces UAV＇s payload and raises system＇s operating efficiency.The simulation results confirms the validity of the model and also provides the basis for the UAV＇s optimization design.

Design on a Multi-Sensor Integrated Attitude Determination System for Small UAVs

This paper discusses the design and implementation of a low cost multi-sensor integrated attitude determination system for small unmanned aerial vehicles( UAVs),which uses strapdown inertial navigation system( SINS) based on micro electromechanical system( MEMS) inertial sensors,commercial GPS receiver,and 3-axis magnetometer.MEMS-SINS initial attitude determination cannot be well performed for the reason that the MEMS inertial sensors biases are time-varying and poor repeatability,therefore in this paper the magnetometer and inclinometer are used to assist the MEMS-SINS initial attitude determination and MEMS inertial sensors field calibration.Furthermore,the attitude determination algorithms are presented to estimate the full attitude during GPS signal outage and non-accelerating situation.Additionally,the attitude information estimation results are compared with the reference of the non-magnetic marble platform and 3-axis turntable.Then the attitude estimation precision satisfies the requirement of attitude measurement for small UAVs during GPS signal outage and availability.Finally,the small UAV autonomous flight test results show that the low cost and real-time attitude determination system can yield continuous,reliable and effective attitude information for small UAVs.

Review of satellite disciplined clock system

Satellite disciplined clock system(SDCS)composed of satellite timing receiver and local frequency synthesis is widely applied for its high accuracy and low cost.This paper provides a review of SDCS.Key technologies such as phase difference measurement,pulse noise process and frequency calibration are surveyed in detail.Disciplined clock model based on PI controller is built and disciplined process is analyzed.The methods of realizing the disciplined clock circuit are classified and summarized.A prototype based on FPGA is proposed.At last development trend of SDCS is discussed.

GPS观测得的2023年2月土耳其双震前后的地壳形变

2023年2月6日土耳其发生7.8级双震,相隔仅9小时、相距近,都是近直立断层走滑型地震,是利用GPS观测研究地震前后地壳形变稀有震例。利用美国网站得到131个GPS站欧亚(板块)参考框架位移数据,分析了2次地震前后的地壳形变。同震水平位移是分析大地震前兆地壳运动的关键现象。GPS分别观测得的2次地震同震位移,特征显著:水平位移最大达4.4 m;向西、向东和向南水平位移3个分区明显,与区域内3个板块构造运动密切相关;而垂直位移较小,无明显分区。2次地震前震中附近的水平位移分别出现(第一次地震)峰值和(第二次地震)闭锁2种类型,但无明显的垂直位移积累。与其他震例一样,在震前两种类型的水平位移区域,同震水平位移是震前位移在时间或空间上的(弹性)回跳,表明大地震有前兆形变。2次地震重合的孕震区内,有对2次地震同震水平位移影响相近的区域。GPS观测明确显示,地壳水平运动是2次大地震的成因。尽管观测不足和未能预报2次地震,但仍突显GNSS可在地震监测、预警和地震预测中发挥作用的优势。

Analysis of RFID Based Positioning Technique Using Received Signal Strength and Directional Antenna

Automatic robot navigation is being utilized in many industries for the purpose of high speed work delivery. Color follower, fix path follower robots are current solution to this activities but dynamic path configuration is not possible in these robots. Hence new system proposes effective and fully dynamic path follower robots using RFID and directional antenna. Radio Frequency Identification (RFID) system permits automatic identification of objects with RFID tags using radio waves which have been widely used in mobile robot navigation, localization and mapping both in indoor and outdoor environment. This article presents a navigation strategy for autonomous mobile robot using passive RFID system. Proposed robot system is provided with RFID tag functionality which will load tag number and direction instruction. At some turning point, user will put RF tag, this tag will be read by RF reader which is placed on robot. As per direction instruction robot will change the direction and reach to the destination. Also as per the movement, robot will send its GPS location to PC (Personal Computer) which will be displayed on PC. Hence main goal is to provide more reliable and low energy consumption based indoor positioning system which will be achieved using directional antenna.

GPS/VISNAV integrated relative navigation and attitude determination system for ultra-close spacecraft formation flying

For the improvement of accuracy and better fault-tolerant performance, a global position system （GPS）/vision navigation （VISNAV） integrated relative navigation and attitude determination approach is presented for ultra-close spacecraft formation flying. Onboard GPS and VISNAV system are adopted and a federal Kalman filter architecture is used for the total navigation system design. Simulation results indicate that the integrated system can provide a total improvement of relative navigation and attitude estimation performance in accuracy and fault-tolerance.

Influential nodes identification in complex networks based on global and local information

Identifying influential nodes in complex networks is essential for network robust and stability,such as viral marketing and information control.Various methods have been proposed to define the influence of nodes.In this paper,we comprehensively consider the global position and local structure to identify influential nodes.The number of iterations in the process of k-shell decomposition is taken into consideration,and the improved k-shell decomposition is then put forward.The improved k-shell decomposition and degree of target node are taken as the benchmark centrality,in addition,as is well known,the effect between node pairs is inversely proportional to the shortest path length between two nodes,and then we also consider the effect of neighbors on target node.To evaluate the performance of the proposed method,susceptible-infected(SI)model is adopted to simulate the spreading process in four real networks,and the experimental results show that the proposed method has obvious advantages over classical centrality measures in identifying influential nodes.