Layer-by-layer fabrication of montmorillonite coating immobilizing Cu_(2)O nanoparticles for continuously catalyzing glycerol to dihydroxyacetone

Microreactors are increasingly used for green and safe chemical processes owing to their benefits of superior mass and heat transfer,increased yield,safety,and simplicity of control.However,immobilizing catalysts in microreactors remains challenging.In this investigation,a technique for creating Cu_(2)O/montmorillonite catalyst coating,using electrostatic attraction for layer-by-layer self-assembly,was proposed.The montmorillonite film's morphology and thickness could be efficiently regulated by adjusting the degree of exfoliation and surface charge of montmorillonite,alongside layer-by-layer coating times.The Cu_(2)O nanoparticles were immobilized using the flow deposition approach.The resulting Cu_(2)O@montmorillonite-film-coated capillary microreactor successfully transformed glycerol into dihydroxyacetone.The conversion of glycerol and product selectivity could be controlled by adjusting the molar ratio of reactants,temperature,residence time,and Cu_(2)O loading.The maximum glycerol conversion observed was 47.6%,with a 27%selectivity toward dihydroxyacetone.The study presents a technique for immobilizing montmorillonite-based catalyst coatings in capillary tubing,which can serve as a foundation for the future application of microreactors in glycerol conversion.

Complete kinetic model for esterification reaction of lauric acid with glycerol to synthesize glycerol monolaurate

Glycerol monolaurate(GML)is a widely used industrial chemical with excellent emulsification and antibacterial effect.The direct esterification of glycerol with lauric acid is the main method to synthesize GML.In this work,the kinetic process of direct esterification was systematically studied using p-toluenesulfonic acid as catalyst.A complete kinetic model of consecutive esterification reaction has been established,and the kinetic equation of acid catalysis was deduced.The isomerization reactions of GML and glycerol dilaurate were investigated.It was found that the reaction was an equilibrium reaction and the reaction rate was faster than the esterification reaction.The kinetic equations of the consecutive esterification reaction were obtained by experiments as k_(1)=(276+92261Xcat)exp(-37720/RT)and k_(2)=(80+4413Xcat)exp(-32240/RT).The kinetic results are beneficial to the optimization of operating conditions and reactor design in GML production process.

Understanding the catalytic performance and deactivation behaviour of second-promoter doped Pt/WO_(χ)/γ-Al_(2)O_(3) catalysts in the glycerol hydrogenolysis for selective and cleaner production of 1,3-propanediol

The selective aqueous-phase glycerol hydrogenolysis is a promising reaction to produce commercially useful 1,3-propanediol(1,3-PDO).The Pt-WOx bifunctional catalyst can catalyse the glycerol hydrogenol-ysis but the catalyst deactivation via sintering,metal leaching,and coking can predominantly occur in the aqueous phase reaction.In this work,the effect of reaction temperature,pressure and second promoter(Cu,Fe,Rh,Mn,Re,Ru,Ir,Sn,B,and P)on catalytic performance and deactivation behaviour of Pt/WOx/-Al2O3 was investigated.When doped with Rh,Mn,Re,Ru,Ir,B,and P,the second promoter boosts catalytic activity by promoting great dispersion of Pt on support and increasing Pt surface area.The increased Bronsted acid sites lead to selective synthesis of 1,3-PDO than 1,2-propanediol(1,2-PDO).The characterization studies of fresh and spent catalysts reveal that the main cause of catalyst deactivation is the Pt sintering,as interpreted based on XRD,CO chemisorption,and TEM analyses.The Pt sintering is affected depending on the second promoter that can either or reduce the interaction between Pt,WO_(χ)/γ and Al_(2)O_(3).As an electron acceptor of Pt in Pt/WO_(χ)/γ-Al_(2)O_(3),Re and Mn as second promoters resulted in increased Pt^(2+) on the catalytic surface,which strengthens the contact between Pt andγ-Al_(2)O_(3) and WO_(χ),resulting in a decrease in Pt sintering.The metal leaching and coking are not affected by the presence of second promoter.The catalyst modified with a second promoter possesses improved catalytic activity and 1,3-PDO production,however the stability continues to remain a challenge.The present work unrav-elled the determining parameters of catalytic activity and deactivation,thus providing a promising pro-tocol toward effective catalysts for glycerol hydrogenolysis.

Vertical 3D Nanostructures Boost Efficient Hydrogen Production Coupled with Glycerol Oxidation Under Alkaline Conditions

Hydrogen production from electrolytic water is an important sustainable technology to realize renewable energy conversion and carbon neutrality.However,it is limited by the high overpotential of oxygen evolution reaction(OER)at the anode.To reduce the operating voltage of electrolyzer,herein thermodynamically favorable glycerol oxidation reaction(GOR)is proposed to replace the OER.Moreover,vertical Ni O flakes and NiMoNH nanopillars are developed to boost the reaction kinetics of anodic GOR and cathodic hydrogen evolution,respectively.Meanwhile,excluding the explosion risk of mixed H_2/O_(2),a cheap organic membrane is used to replace the expensive anion exchange membrane in the electrolyzer.Impressively,the electrolyzer delivers a remarkable reduction of operation voltage by 280 mV,and exhibits good long-term stability.This work provides a new paradigm of hydrogen production with low cost and good feasibility.

Optimized Electronic Modification of S-Doped CuO Induced by Oxidative Reconstruction for Coupling Glycerol Electrooxidation with Hydrogen Evolution

Glycerol(electrochemical) oxidation reaction(GOR) producing organic small molecule acid and coupling with hydrogen evolution reaction is a critical aspect of ensuring balanced glycerol capacity and promoting hydrogen generation on a large scale. However, the development of highly efficient and selective non-noble metal-based GOR electrocatalysts is still a key problem. Here, an S-doped CuO nanorod array catalyst(S-CuO/CF) constructed by sulfur leaching and oxidative remodeling is used to drive GOR at low potentials: It requires potentials of only 1.23 and 1.33 V versus RHE to provide currents of 100 and 500 mA cm^(-2), respectively. Moreover, it shows satisfactory comprehensive performance(at 100 mA cm^(-2), V_(cell) = 1.37 V) when assembled as the anode in asymmetric coupled electrolytic cell. Furthermore, we propose a detailed cycle reaction pathway(in alkaline environment) of S-doped CuO surface promoting GOR to produce formic acid and glycolic acid. Among them, the C–C bond breaking and lattice oxygen deintercalation steps frequently involved in the reaction pathway are the key factors to determine the catalytic performance and product selectivity. This research provides valuable guidance for the development of transition metal-based electrocatalysts for GOR and valuable insights into the glycerol oxidation cycle reaction pathway.

Zeolite-assisted etherification of glycerol with butanol for biodiesel oxygenated additives production

This research was focused on the valorisation of glycerol,exploring the feasibility of an efficient route for oxygenated additives production based on its etherification with bio-butanol.A home-made BEA zeolite sample with a tuneable acidity has been proposed as the catalytic system,being tested in a stirred reactor under different etherification conditions.Although a reaction temperature as high as 200℃resulted to be beneficial in terms of glycerol conversion(-90%),only by operating at milder conditions the product selectivity to glycerol-ethers can be better controlled,in order to obtain a bio-fuel complying with the requirements for mixing with fossil diesel or biodiesel,without any need of purification from large amount of by-products.A comprehensive identification of all the compounds formed during the reaction was performed by a GC-MS analysis,on the basis of the complex network of consecutive and parallel reaction paths leading not only to the desired ethers,but also to many side products not detected in similar acid-catalyzed reactions in liquid phase and not available in the most used mass-spectra libraries.

Rhodium Nanoparticle-Loaded Carbon Black Electrocatalyst for the Glycerol Oxidation Reaction in Alkaline Medium

Rhodium nanoparticle-loaded carbon black (Rh/CB) was prepared by a wet method, and its activity and durability for glycerol oxidation reaction (GOR) in alkaline medium were compared with Pt, Pd and Au nanoparticle-loaded CB (Pt/CB, Pd/CB and Au/CB). In the cyclic voltammogram of the Rh/CB electrode, the redox waves due to hydrogen adsorption/desorption and the surface OH monolayer formation/reduction were observed at more negative potentials than the Pt/CB and Pd/CB electrodes. The onset and peak potentials of the GOR current densities for the Rh/CB electrode were ca. –0.55 and –0.30 V vs. Hg/HgO, respectively, which were 0.10 and 0.20 V more negative than the Pt/CB electrode whose GOR activity was the best, indicating that Rh was a fascinating metal for reducing the overpotential for GOR. In the electrostatic electrolysis with the Rh/CB and Pt/CB electrodes, the decrease in the GOR current density in the former with time was suppressed compared to that in the latter, suggesting that the tolerance to poisoning for the Rh/CB electrode was superior to that for the Pt/CB electrode.

PtAg Nanoparticle Electrocatalysts for the Glycerol Oxidation Reaction in Alkaline Medium

To improve the activity for glycerol oxidation reaction (GOR) of Pt, PtAg (mole ratio of Pt/Ag = 3 and 1) alloy nanoparticle-loaded carbon black (Pt/CB, PtAg(3:1)/CB, PtAg(1:1)/CB) catalysts were prepared by a wet method. The resultant catalysts, moreover, were heat-treated in a N2 atmosphere at 200°C. The alloying of Pt with Ag for each PtAg/CB was confirmed by X-ray diffractometry and electron dispersive X-ray spectrometry. The heat-treatment did not change the crystal structure of the PtAg alloys and increased their particle size. X-ray photoelectron spectroscopy exhibited that stabilizers were completely removed from the PtAg alloy surface, and the Pt4f and Ag3d doublets due to metallic Pt and Ag, respectively, shifted to lower binding energies, supporting the alloying of Pt with Ag. Both PtAg/CB electrodes had two oxidation waves of glycerol irrespective of heat-treatment, which was different from the Pt/CB electrode. The onset potential of the first oxidation wave was -0.60 V, which was 0.20 V less positive than that for the Pt/CB electrode, indicating the alloying of Pt with Ag greatly improved the GOR activity of Pt. The heat-treated PtAg(3:1)/ CB electrode improved the GOR current density of the second oxidation peak. In the potentiostatic electrolysis at -0.1 and 0 V for both PtAg/CB electrodes, the ratio of oxidation current density at 60 min to that at 5 min (j60/j5), an indicator of the catalyst deterioration, at 0 V was higher than that at -0.1 V, because the adsorbed oxidation intermediates were greatly consumed at the larger overpotential. The heat-treatment of the PtAg(3:1)/CB electrode increased the j60/j5 value at -0.1 V but decreased that at 0 V. This could be attributed to the formation of high-order oxidation intermediates which might have stronger poisoning effect.

Economic Analysis of Biodiesel and Glycerol Carbonate Production Plant by Glycerolysis

Techno-economic analysis of an indirect use of carbon dioxide within the route of glycerolysis of glycerol with urea is investigated. The results show that the net present value of the biodiesel-glycerol carbonate production by glycerolysis is higher than the biodiesel-glycerol carbonate production by direct carboxylationat at the end of the 12-year operation with similar capacities. The stochastic model has predicted that using glycerolysis route for the synthesis of glycerol carbonate production might increase the probability of getting positive net present value by about 15%.

Catalytic conversion of cellulose-based biomass and glycerol to lactic acid

Catalytic transformation of cellulose into value-added chemicals is of great importance for utilization of renewable and abundant biomass. Due to the high oxygen content, cellulose serves as an ideal candidate for the production of oxygenates, in particular lactic acid which is a versatile building block in chemical industry. The efficient conversion of cellulose to lactic acid generally requires selective activation of specific C-O and C-C bonds, and therefore multifunctional catalysts that combine several key reactions including hydrolysis, isomerization and retro-aldol fragmentation are highly desirable. This review article highlights the recently developed catalytic systems and catalysts for the selective transformation of cellulose and cellulose-derived carbohydrates into lactic acid, lactates and/or its esters. Emphases will be put on the reaction mechanism and key factors that exert effects on the catalytic performances. In addition, the catalytic transformation of glycerol, a C3 compound over-supplied from biodiesel industry, will also be surveyed. Recent advances in the development of new catalysts or strategies are analyzed and discussed to gain insight into the transformation of C3 compound to lactic acid.

Sustainable value-added C3 chemicals from glycerol transformations:A mini review for heterogeneous catalytic processes

It is of importance to convert glycerol,the primary by-product from biodiesel manufacturing,to various valuable C3 chemicals,such as acrolein via dehydration,lactic acid,1,3-dihydroxyacetone via oxidation,and 1,3-propanediol,allyl alcohol via hydrogenolysis.As compared to petroleum-based resources,C3 chemicals from glycerol provide a benign,sustainable and atomically economic feature.Extensive heterogeneous catalysts have been designed,prepared and tested for these transformations.In recent five years,great progress,including high yields to target products over appropriate catalysts,insight into reaction mechanism and network,has been achieved.The present review systematically covers recent research progress on sustainable C3 chemical production from catalytic glycerol transformations.We hope that it will benefit future research on transformations of glycerol as well as other polyols.

Glycerol steam reforming over calcium hydroxyapatite supported cobalt and cobalt-cerium catalysts

Calcium hydroxyapatite（HAp） supported cobalt and cobalt-cerium catalysts were examined for hydrogen production in glycerol steam reforming. The catalysts were synthesized by incipient wetness impregnation method and characterized through X-ray diffraction, adsorption-desorption isotherms of N2 and temperature-programmed reduction of H2. Catalytic properties were examined in terms of glycerol conversion, selectivity toward hydrogen and C-containing products in temperature range of 650-800 ℃.The effect of active metal reduction and residence time（thereby flow feed rate） was analysed. It was found that the growth of residence time increased the hydrogen selectivity in the whole temperatures range whereas the catalyst reduction, before the catalytic process, decreased the hydrogen selectivity at temperatures lower than 750 ℃. The cerium addition improved the catalytic behaviour for hydrogen production via glycerol steam reforming. Cerium oxide suppressed the sintering of cobalt particles and as a result Co-Ce/HAp ensured higher stability and H2 selectivity than Co/HAp. Under reaction conditions investigated in this study, the highest selectivity toward hydrogen at 650 ℃ was obtained for 7.5 Co-Ce/HAp catalyst.

Selective synthesis of triacetin from glycerol catalyzed by HZSM-5/MCM-41 micro/mesoporous molecular sieve

HZSM-5/MCM-41 molecular sieve (H-ZM) catalysts with well-defined micro/mesoporous structures were synthesized and showed high performance for selective synthesis of triacetin via the esterification reaction of glycerol with acetic acid. The conversion of glycerol was demonstrated to be 100% and the triacetin selectivity was over 91%, which can be attributed to the synergistic effect regarding suitable acidic property, excellent diffusion efficiency and good stability derived from the combined advantages of microporous molecular sieve HZSM-5 and mesoporous molecular sieve MCM-41.

Glycerol carbonate synthesis from glycerol and dimethyl carbonate using guanidine ionic liquids

A large number of surplus glycerol from the biodiesel production can be used as renewable feedstock to produce glycerol carbonate. In this paper, a series of guanidine-based ionic liquids were synthesized to catalyze the transesterification of glycerol and dimethyl carbonate. The tunable basicity and the anion–cation cooperative effect were responsible for the obtained results. The [TMG][TFE] showed the best activity turnover frequency(TOF)of 1754.0 h^(-1), glycerol(GL) conversion of 91.8%, glycerol carbonate(GC) selectivity of 95.5%) at 80 °C with 0.1 mol% catalyst for 30 min. The reaction mechanism of the transesterification was also proposed.

Syngas production by dry reforming of the mixture of glycerol and ethanol with CaCO3

The reduction of CO2 emission is crucial for the mitigation of climate change.A considerable amount of industrial CO2 can be absorbed in the form of carbonates through high-temperature sorption processes.In this regard,the efficient conversion of carbonates to value-added products will provide an economically viable method for the sustainable usage of carbon compounds.Herein,we report a promising solution involving the use of a glycerol and ethanol mixture as a hydrogen donor in the dry reforming process with CaCO3 to produce syngas.A series of metal active components,including Ni,Fe,Co,Cu,Pt,Pd,Ru,and Rh,was used to promote this reaction.Ni showed comparable performance with that of Pd,but outperformed Co,Fe,Cu,Rh,Ru,and Pt.Approximately 100%conversion of glycerol and ethanol,~92%selectivity of synthesis gas(H2 and CO),and a H2/CO ratio of^1.2 were achieved over CaCO3 containing10 wt%Ni(10Ni-CaCO3).Meanwhile,the CO2 concentration was less than 5 vol%,indicating that most of the CO2 captured by the carbonate can be transformed into chemicals;however,they cannot simply be emitted.The CO2 released from the decomposition of CaCO3 not only adjusted the ratio of H2 to CO but also eliminated cokes to guarantee the CO2 absorption-conversion cyclic stability in the absence of steam and at high temperatures.

Aquaporin-3 Deletion Reduces Glycerol and ATP Content in Mouse Sciatic Nerve

We reported the expression and function of aquaglyceroporin AQP3 in mouse peripheral nervous system.AQP3 mRNA was identified in freshly isolated mouse sciatic nerve by RT-PCR.Immunofluorescence using AQP3 antibody localized the protein expression in the myelin sheathe of sciatic nerve fibers.Although primary morpholo-gical evaluation of sciatic nerves from AQP3-knockout and wildtype mice revealed no significant difference,biochemical analysis demonstrated remarkably decreased glycerol and ATP contents in freshly isolated AQP3-knockout sciatic nerve.The study indicates an important role of facilitated glycerol transport mechanism in peripheral nerve energy metabolism.

Hydrogen production by glycerol reforming in supercritical water over Ni/MgO-ZrO_2 catalyst

Nano ZrO2 and MgO-ZrO2 were prepared by a self-assembly route and were employed as the support for Ni catalysts used in hydrogen production from glycerol reforming in supercritical water （SCW）. The reforming experiments were conducted in a tubular fixed-bed flow reactor over a temperature range of 600-800 ℃. The influences of process variables such as temperature, contact time, and water to glycerol ratio on hydrogen yield were investigated and the catalysts were charactered by ICP, BET, XRD and SEM. The results showed that high hydrogen yield was obtained from glycerol by reforming in supercritical water over the Ni/MgO-ZrO2 catalysts in a short contact time. The MgO in the catalyst showed significant promotion effect for hydrogen production likely due to the formation of the alkaline active site. Even when the glycerol feed concentration was up to 45 wt%, glycerol was completely gasified and transfered to the gas products containing hydrogen, carbon dioxide, and methane along with small amounts of carbon monoxide. At a diluted feed concentration of 5 wt%, near theoretical yield of 7 mole of H2/mol of glycerol could be obtained.

Cardiogenic differentiation of mesenchymal stem cells on elastomeric poly (glycerol sebacate)/collagen core/shell fibers

AIM: To facilitate engineering of suitable biomaterials to meet the challenges associated with myocardial infarction. METHODS: Poly (glycerol sebacate)/collagen (PGS/ collagen) core/shell fibers were fabricated by core/ shell electrospinning technique, with core as PGS and shell as collagen polymer; and the scaffolds were characterized by scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), contact angle and tensile testing for cardiac tissue engineering. Collagen nanofibers were also fabricated by electrospinning for comparison with core/shell fibers. Studies on cell-scaffold interaction were carriedout using cardiac cells and mesenchymal stem cells (MSCs) co-culture system with cardiac cells and MSCs separately serving as positive and negative controls respectively. The co-culture system was characterized for cell proliferation and differentiation of MSCs into cardiomyogenic lineage in the co-culture environment using dual immunocytochemistry. The co-culture cells were stained with cardiac specific marker proteins like actinin and troponin and MSC specific marker protein CD 105 for proving the cardiogenic differentiation of MSCs. Further the morphology of cells was analyzed using SEM.RESULTS: PGS/collagen core/shell fibers, core is PGS polymer having an elastic modulus related to that of cardiac fibers and shell as collagen, providing natural environment for cellular activities like cell adhesion, proliferation and differentiation. SEM micrographs of electrospun fibrous scaffolds revealed porous, beadless, uniform fibers with a fiber diameter in the range of 380 ± 77 nm and 1192 ± 277 nm for collagen fibers and PGS/collagen core/shell fibers respectively. The obtained PGS/collagen core/shell fibrous scaffolds were hydrophilic having a water contact angle of 17.9 ± 4.6° compared to collagen nanofibers which had a contact angle value of 30 ± 3.2°. The PGS/collagen core/shell fibers had mechanical properties comparable to that of native heart muscle with a young's modulus of 4.24 ± 0.7 MPa, while that of collagen nanofibers was comparatively higher around 30.11 ± 1.68 MPa. FTIR spectrum was performed to confirm the functional groups present in the electrospun scaffolds. Amide Ⅰ and amide Ⅱ of collagen were detected at 1638.95 cm -1 and 1551.64 cm -1 in the electrospun collagen fibers and at 1646.22 cm -1 and 1540.73 cm -1 for PGS/collagen core/shell fibers respectively. Cell culture studies performed using MSCs and cardiac cells co-culture environment, indicated that the cellproliferation significantly increased on PGS/collagen core/shell scaffolds compared to collagen fibers and the cardiac marker proteins actinin and troponin were expressed more on PGS/collagen core/shell scaffolds compared to collagen fibers alone. Dual immunofluorescent staining was performed to further confirm the cardiogenic differentiation of MSCs by employing MSC specific marker protein, CD 105 and cardiac specific marker protein, actinin. SEM observations of cardiac cells showed normal morphology on PGS/collagen fibers and providing adequate tensile strength for the regeneration of myocardial infarction. CONCLUSION: Combination of PGS/collagen fibers and cardiac cells/MSCs co-culture system providing natural microenvironments to improve cell survival and differentiation, could bring cardiac tissue engineering to clinical application.

Distribution of glycerol dialkyl glycerol tetraethers in Tibetan hot springs

Isoprenoidal glycerol dialkyl glycerol tetraethers （iGDGTs） from the Gulu hot springs （23--83.6 ℃, pH 〉 7） and Yangbajing hot springs （80-128 ℃, pH 〉 7） were analyzed in order to investigate the distribution of archaeal lipids among different hot springs in Tibet. A soil sample from Gulu was incubated at different temperatures and analyzed for changes in iGDGTs to help evaluate whether surrounding soil may contribute to the iGDGTs in hot springs. The sources of bacterial GDGTs （bGDGTs） in these hot springs were also investigated. The results revealed different profiles ofiGDGTs between Gulu and Yangbajing hot springs. Core iGDGTs and polar iGDGTs also presented different patterns in each hot spring. The PCA analysis showed that the structure of polar iGDGTs can be explained by three factors and suggested multiple sources of these compounds. Bivariate correlation analysis showed significant positive correlations between polar and core bGDGTs, suggesting the in situ production of bGDGTs in the hot springs. Furthermore, in the soil incubation experiment, temperature had the most significant influence on concentration of bGDGTs rather than iGDGTs, and polar bGDGTs had greater variability than core bGDGTs with changing temperature. Our results indicated that soil input had little influence on the composition of GDGTs in Tibetan hot springs.

Glycerol effects on optical,weight and geometrical properties of skin tissue

Complex study of glycerol effects on the skin tissue was performed.The change in optical,weight and geometrical parameters of the rat skin under the action of the glycerol solutions was studied ex vivo.Possible mechanisms of the skin optical clearing under the action of glycerol solutions of different concentrations were discussed.The results can be helpful for refinement of models developed to evaluate the effective diffusion coefficients of glycerol in tissues.