Manure substitution improves maize yield by promoting soil fertility and mediating the microbial community in lime concretion black soil

Synthetic nitrogen(N)fertilizer has made a great contribution to the improvement of soil fertility and productivity,but excessive application of synthetic N fertilizer may cause agroecosystem risks,such as soil acidification,groundwater contamination and biodiversity reduction.Meanwhile,organic substitution has received increasing attention for its ecologically and environmentally friendly and productivity benefits.However,the linkages between manure substitution,crop yield and the underlying microbial mechanisms remain uncertain.To bridge this gap,a three-year field experiment was conducted with five fertilization regimes:i)Control,non-fertilization;CF,conventional synthetic fertilizer application;CF_(1/2)M_(1/2),1/2 N input via synthetic fertilizer and 1/2 N input via manure;CF_(1/4)M_(3/4),1/4 N input synthetic fertilizer and 3/4 N input via manure;M,manure application.All fertilization treatments were designed to have equal N input.Our results showed that all manure substituted treatments achieved high soil fertility indexes(SFI)and productivities by increasing the soil organic carbon(SOC),total N(TN)and available phosphorus(AP)concentrations,and by altering the bacterial community diversity and composition compared with CF.SOC,AP,and the soil C:N ratio were mainly responsible for microbial community variations.The co-occurrence network revealed that SOC and AP had strong positive associations with Rhodospirillales and Burkholderiales,while TN and C:N ratio had positive and negative associations with Micromonosporaceae,respectively.These specific taxa are implicated in soil macroelement turnover.Random Forest analysis predicted that both biotic(bacterial composition and Micromonosporaceae)and abiotic(AP,SOC,SFI,and TN)factors had significant effects on crop yield.The present work strengthens our understanding of the effects of manure substitution on crop yield and provides theoretical support for optimizing fertilization strategies.

Effect of Rare-Earth Element Substitution in Superconducting R_(3)Ni_(2)O_(7) under Pressure

Recently,high temperature(T_(c)≈80 K)superconductivity(SC)has been discovered in La_(3)Ni_(2)O_(7)(LNO)under pressure.This raises the question of whether the superconducting transition temperature T_(c) could be further enhanced under suitable conditions.One possible route for achieving higher T_(c) is element substitution.Similar SC could appear in the Fmmm phase of rare-earth(RE)R_(3)Ni_(2)O_(7)(RNO,R=RE element)material series under suitable pressure.The electronic properties in the RNO materials are dominated by the Ni 3d orbitals in the bilayer NiO_(2) plane.In the strong coupling limit,the SC could be fully characterized by a bilayer single 3d_(x^(2)−y^(2))-orbital t–J‖–J⊥ model.With RE element substitution from La to other RE element,the lattice constant of the Fmmm RNO material decreases,and the resultant electronic hopping integral increases,leading to stronger superexchanges between the 3d_(x^(2)−y^(2)) orbitals.Based on the slave-boson mean-field theory,we explore the pairing nature and the evolution of T_(c) in RNO materials under pressure.Consequently,it is found that the element substitution does not alter the pairing nature,i.e.,the inter-layer s-wave pairing is always favored in the superconducting RNO under pressure.However,the T_(c) increases from La to Sm,and a nearly doubled T_(c) could be realized in SmNO under pressure.This work provides evidence for possible higher T_(c) R_(3)Ni_(2)O_(7) materials,which may be realized in further experiments.

Atom substitution of the solid-state electrolyte Li_(10)GeP_(2)S_(12)for stabilized all-solid-state lithium metal batteries

Solid-state electrolyte Li_(10)GeP_(2)S_(12)(LGPS)has a high lithium ion conductivity of 12 mS cm^(-1)at room temperature,but its inferior chemical stability against lithium metal anode impedes its practical application.Among all solutions,Ge atom substitution of the solid-state electrolyte LGPS stands out as the most promising solution to this interface problem.A systematic screening framework for Ge atom substitution including ionic conductivity,thermodynamic stability,electronic and mechanical properties is utilized to solve it.For fast screening,an enhanced model Dop Net FC using chemical formulas for the dataset is adopted to predict ionic conductivity.Finally,Li_(10)SrP_(2)S_(12)(LSrPS)is screened out,which has high lithium ion conductivity(12.58 mS cm^(-1)).In addition,an enhanced migration of lithium ion across the LSr PS/Li interface is found.Meanwhile,compared to the LGPS/Li interface,LSrPS/Li interface exhibits a larger Schottky barrier(0.134 eV),smaller electron transfer region(3.103?),and enhanced ability to block additional electrons,all of which contribute to the stabilized interface.The applied theoretical atom substitution screening framework with the aid of machine learning can be extended to rapid determination of modified specific material schemes.

Synthesis and Modulation of Low-Dimensional Transition Metal Chalcogenide Materials via Atomic Substitution

In recent years,low-dimensional transition metal chalcogenide(TMC)materials have garnered growing research attention due to their superior electronic,optical,and catalytic properties compared to their bulk counterparts.The controllable synthesis and manipulation of these materials are crucial for tailoring their properties and unlocking their full potential in various applications.In this context,the atomic substitution method has emerged as a favorable approach.It involves the replacement of specific atoms within TMC structures with other elements and possesses the capability to regulate the compositions finely,crystal structures,and inherent properties of the resulting materials.In this review,we present a comprehensive overview on various strategies of atomic substitution employed in the synthesis of zero-dimensional,one-dimensional and two-dimensional TMC materials.The effects of substituting elements,substitution ratios,and substitution positions on the structures and morphologies of resulting material are discussed.The enhanced electrocatalytic performance and photovoltaic properties of the obtained materials are also provided,emphasizing the role of atomic substitution in achieving these advancements.Finally,challenges and future prospects in the field of atomic substitution for fabricating low-dimensional TMC materials are summarized.

Atomically Substitutional Engineering of Transition Metal Dichalcogenide Layers for Enhancing Tailored Properties and Superior Applications

Transition metal dichalcogenides(TMDs)are a promising class of layered materials in the post-graphene era,with extensive research attention due to their diverse alternative elements and fascinating semiconductor behavior.Binary MX2 layers with different metal and/or chalcogen elements have similar structural parameters but varied optoelectronic properties,providing opportunities for atomically substitutional engineering via partial alteration of metal or/and chalcogenide atoms to produce ternary or quaternary TMDs.The resulting multinary TMD layers still maintain structural integrity and homogeneity while achieving tunable(opto)electronic properties across a full range of composition with arbitrary ratios of introduced metal or chalcogen to original counterparts(0–100%).Atomic substitution in TMD layers offers new adjustable degrees of freedom for tailoring crystal phase,band alignment/structure,carrier density,and surface reactive activity,enabling novel and promising applications.This review comprehensively elaborates on atomically substitutional engineering in TMD layers,including theoretical foundations,synthetic strategies,tailored properties,and superior applications.The emerging type of ternary TMDs,Janus TMDs,is presented specifically to highlight their typical compounds,fabrication methods,and potential applications.Finally,opportunities and challenges for further development of multinary TMDs are envisioned to expedite the evolution of this pivotal field.

Design of low-alloying and high-performance solid solution-strengthened copper alloys with element substitution for sustainable development

Solid solution-strengthened copper alloys have the advantages of a simple composition and manufacturing process,high mechanical and electrical comprehensive performances,and low cost;thus,they are widely used in high-speed rail contact wires,electronic component connectors,and other devices.Overcoming the contradiction between low alloying and high performance is an important challenge in the development of solid solution-strengthened copper alloys.Taking the typical solid solution-strengthened alloy Cu-4Zn-1Sn as the research object,we proposed using the element In to replace Zn and Sn to achieve low alloying in this work.Two new alloys,Cu-1.5Zn-1Sn-0.4In and Cu-1.5Zn-0.9Sn-0.6In,were designed and prepared.The total weight percentage content of alloying elements decreased by 43%and 41%,respectively,while the product of ultimate tensile strength(UTS)and electrical conductivity(EC)of the annealed state increased by 14%and 15%.After cold rolling with a 90%reduction,the UTS of the two new alloys reached 576 and 627MPa,respectively,the EC was 44.9%IACS and 42.0%IACS,and the product of UTS and EC(UTS×EC)was 97%and 99%higher than that of the annealed state alloy.The dislocations proliferated greatly in cold-rolled alloys,and the strengthening effects of dislocations reached 332 and 356 MPa,respectively,which is the main reason for the considerable improvement in mechanical properties.

Atomic Ni directional-substitution on ZnIn_(2)S_(4) nanosheet to achieve the equilibrium of elevated redox capacity and efficient carrier-kinetics performance in photocatalysis

It is a challenge to coordinate carrier-kinetics performance and the redox capacity of photogenerated charges synchronously at the atomic level for boosting photocatalytic activity.Herein,the atomic Ni was introduced into the lattice of hexagonal ZnIn_(2)S_(4) nanosheets(Ni/ZnIn_(2)S_(4))via directionalsubstituting Zn atom with the facile hydrothermal method.The electronic structure calculations indicate that the introduction of Ni atom effectively extracts more electrons and acts as active site for subsequent reduction reaction.Besides the optimized light absorption range,the elevation of Efand ECBendows Ni/ZnIn_(2)S_(4) photocatalyst with the increased electron concentration and the enhanced reduction ability for surface reaction.Moreover,ultrafast transient absorption spectroscopy,as well as a series of electrochemical tests,demonstrates that Ni/ZnIn_(2)S_(4) possesses 2.15 times longer lifetime of the excited charge carriers and an order of magnitude increase for carrier mobility and separation efficiency compared with pristine ZnIn_(2)S_(4).These efficient kinetics performances of charge carriers and enhanced redox capacity synergistically boost photocatalytic activity,in which a 3-times higher conversion efficiency of nitrobenzene reduction was achieved upon Ni/ZnIn_(2)S_(4).Our study not only provides in-depth insights into the effect of atomic directional-substitution on the kinetic behavior of photogenerated charges,but also opens an avenue to the synchronous optimization of redox capacity and carrier-kinetics performance for efficient solar energy conversion.

Effects of long-term partial substitution of inorganic fertilizer with pig manure and/or straw on nitrogen fractions and microbiological properties in greenhouse vegetable soils

Partial substitution of inorganic fertilizers with organic amendments is an important agricultural management practice.An 11-year field experiment(22 cropping periods)was carried out to analyze the impacts of different partial substitution treatments on crop yields and the transformation of nitrogen fractions in greenhouse vegetable soil.Four treatments with equal N,P_(2)O_(5),and K_(2)O inputs were selected,including complete inorganic fertilizer N(CN),50%inorganic fertilizer N plus 50%pig manure N(CPN),50%inorganic fertilizer N plus 25%pig manure N and 25%corn straw N(CPSN),and 50%inorganic fertilizer N plus 50%corn straw N(CSN).Organic substitution treatments tended to increase crop yields since the 6th cropping period compared to the CN treatment.From the 8th to the 22nd cropping periods,the highest yields were observed in the CPSN treatment where yields were 7.5-11.1%greater than in CN treatment.After 11-year fertilization,compared to CN,organic substitution treatments significantly increased the concentrations of NO_(3)^(-)-N,NH_(4)^(+)-N,acid hydrolysis ammonium-N(AHAN),amino acid-N(AAN),amino sugar-N(ASN),and acid hydrolysis unknown-N(AHUN)in soil by 45.0-69.4,32.8-58.1,49.3-66.6,62.0-69.5,34.5-100.3,and 109.2-172.9%,respectively.Redundancy analysis indicated that soil C/N and OC concentration significantly affected the distribution of N fractions.The highest concentrations of NO_(3)^(-)-N,AHAN,AAN,AHUN were found in the CPSN treatment.Organic substitution treatments increased the activities ofβ-glucosidase,β-cellobiosidase,N-acetyl-glucosamidase,L-aminopeptidase,and phosphatase in the soil.Organic substitution treatments reduced vector length and increased vector angle,indicating alleviation of constraints of C and N on soil microorganisms.Organic substitution treatments increased the total concentrations of phospholipid fatty acids(PLFAs)in the soil by 109.9-205.3%,and increased the relative abundance of G^(+)bacteria and fungi taxa,but decreased the relative abundance of G-bacteria,total bacteria,and actinomycetes.Overall,long-term organic substitution management increased soil OC concentration,C/N,and the microbial population,the latter in turn positively influenced soil enzyme activity.Enhanced microorganism numbers and enzyme activity enhanced soil N sequestration by transforming inorganic N to acid hydrolysis-N(AHN),and enhanced soil N supply capacity by activating non-acid hydrolysis-N(NAHN)to AHN,thus improving vegetable yield.Application of inorganic fertilizer,manure,and straw was a more effective fertilization model for achieving sustainable greenhouse vegetable production than application of inorganic fertilizer alone.

The gradual subduction-collision evolution model of Proto-South China Sea and its control on oil and gas

This study involved outcrop,drilling,seismic,gravity,and magnetic data to systematically document the geological records of the subduction process of Proto-South China Sea(PSCS)and establish its evolution model.The results indicate that a series of arc-shaped ophiolite belts and calcalkaline magmatic rocks are developed in northern Borneo,both of which have the characteristics of gradually changing younger from west to east,and are direct signs of subduction and collision of PSCS.At the same time,the subduction of PSCS led to the formation of three accretion zones from the south to the north in Borneo,the Kuching belt,Sibu belt,and Miri belt.The sedimentary formation of northern Borneo is characterized by a three-layer structure,with the oceanic basement at the bottom,overlying the deep-sea flysch deposits of the Rajang–Crocker group,and the molasse sedimentary sequence that is dominated by river-delta and shallow marine facies at the top,recording the whole subduction–collision–orogeny process of PSCS.Further,seismic reflection and tomography also confirmed the subduction and collision of PSCS.Based on the geological records of the subduction and collision of PSCS,combined with the comprehensive analysis of segmented expansion and key tectonic events in the South China Sea,we establish the“gradual”subduction-collision evolution model of PSCS.During the late Eocene to middle Miocene,the Zengmu,Nansha,and Liyue–Palawan blocks were separated by West Baram Line and Balabac Fault,which collided with the Borneo block and Kagayan Ridge successively from the west to the east,forming several foreland basin systems,and PSCS subducted and closed from the west to the east.The subduction and extinction of PSCS controlled the oil and gas distribution pattern of southern South China Sea(SSCS)mainly in three aspects.First,the“gradual”closure process of PSCS led to the continuous development of many large deltas in SSCS.Second,the deltas formed during the subduction–collision of PSCS controlled the development of source rocks in the basins of SSCS.Macroscopically,the distribution and scale of deltas controlled the distribution and scale of source rocks,forming two types of source rocks,namely,coal measures and terrestrial marine facies.Microscopically,the difference of terrestrial higher plants carried by the delta controlled the proportion of macerals of source rocks.Third,the difference of source rocks mainly controlled the distribution pattern of oil and gas in SSCS.Meanwhile,the difference in the scale of source rocks mainly controlled the difference in the amount of oil and gas discoveries,resulting in a huge amount of oil and gas discoveries in the basin of SSCS.Meanwhile,the difference of macerals of source rocks mainly controlled the difference of oil and gas generation,forming the oil and gas distribution pattern of“nearshore oil and far-shore gas”.

Gradual Bedside Reduction of Gastroschisis in a Resource Constrained Setting: Preliminary Results from 32 Cases

Introduction: Gastroschisis is one of the neonatal pathologies with bad prognosis in developing countries due to a lack of equipment. We aim to report one way of managing this malformation that could be practised everywhere, constituting an alternative approach to surgery in poor areas. Patients and Methods: This observational and descriptive study included newborn babies with gastroschisis who underwent gradual bedside reduction at the Paediatric Surgery Department of the Yaounde Central Hospital. Results: Our cohort was constituted by 32 newborn babies with a mean age of 18.12 hours on admission. The Lefort type 2 was the most frequent in 81.25% of cases. The mean time for oral feeding after complete reduction was 17.4 days and the duration of hospital stay was 24.91 days. Survival rates were at 40.63%, with a residual hernia after healing in 38.46% of cases. Conclusion: Despite the high rate of mortality, gradual reduction of gastroschisis at the bedside seems to be an opportunity for resource constrained areas and can be an alternative solution to surgery.

Development and characterization of wheat–Aegilops kotschyi 1U^(k)(1A)substitution line with positive dough quality parameters

Exploring novel high molecular weight glutenin subunits(HMW-GSs)from wild related species is a strategy to improve wheat processing quality.The objective of the present investigation was to identify the chromosomes of the wheatalien introgression line N124,derived from the hybridization between Triticum aestivum with Aegilops kotschyi,and characterize the effects on quality-related traits.Fluorescence in situ hybridization karyotypes showed that N124 is a disomic 1U^(k)(1A)substitution line.Sodium dodecyl sulfate polyacrylamide gel electrophoresis(SDS-PAGE)and reversedphase high-performance liquid chromatography verified N124 expressed two HMW-GSs of the Ae.kotschyi parent.PacBio RNA sequencing and phylogenetic analysis confirmed that the two HMW-GSs were U^(k)x and U^(k)y.Compared to the wheat parent,the substitution line had no obvious agronomic defects except fewer grains per spike but improved several major quality parameters.It can be served as a donor or bridge material for wheat quality improvement.

Securing Healthcare Data in IoMT Network Using Enhanced Chaos Based Substitution and Diffusion

Patient privacy and data protection have been crucial concerns in Ehealthcare systems for many years.In modern-day applications,patient data usually holds clinical imagery,records,and other medical details.Lately,the Internet of Medical Things(IoMT),equipped with cloud computing,has come out to be a beneficial paradigm in the healthcare field.However,the openness of networks and systems leads to security threats and illegal access.Therefore,reliable,fast,and robust security methods need to be developed to ensure the safe exchange of healthcare data generated from various image sensing and other IoMT-driven devices in the IoMT network.This paper presents an image protection scheme for healthcare applications to protect patients’medical image data exchanged in IoMT networks.The proposed security scheme depends on an enhanced 2D discrete chaotic map and allows dynamic substitution based on an optimized highly-nonlinear S-box and diffusion to gain an excellent security performance.The optimized S-box has an excellent nonlinearity score of 112.The new image protection scheme is efficient enough to exhibit correlation values less than 0.0022,entropy values higher than 7.999,and NPCR values around 99.6%.To reveal the efficacy of the scheme,several comparison studies are presented.These comparison studies reveal that the novel protection scheme is robust,efficient,and capable of securing healthcare imagery in IoMT systems.

欧盟PFAS限制提案解读及其对制冷空调行业影响与应对

在《〈关于消耗臭氧层物质的蒙特利尔议定书〉基加利修正案》的履约和“双碳”目标的双重驱动下,制冷剂替代是制冷空调领域最为关注的热点之一。采用热物性相近的低GWP的HFOs制冷剂和天然制冷剂作为替代品,实现HFCs的削减被认为是较为合适的替代技术路线;但随着2023年2月欧盟出台的PFAS限制提案,引发了对HFOs制冷剂替代前景的担忧,这可能影响全球制冷剂替代发展。因此,首先对PFAS物质进行了介绍,分析了含氟制冷剂与PFASs的关系,并对PFAS法案的形成脉络和关键内容进行了解读,总结了不同领域对此的观点,希望对未来制冷剂替代方案的制定提供一定思辨意义和参考价值。

新能源汽车对成品油替代的区域性研究

2023年,中国新能源汽车已进入全面市场拓展期。目前,中国新能源汽车正处于“两高一强”的发展阶段,对成品油的替代呈现“一家独大”的现状。将全国分为东北、西北、西南、华东、华南、华北六个区域,构建“长期看保有,中期看销量,短期看运营车”的分析框架,从短期、中期、长期三个维度对不同区域、不同省份的新能源汽车的成品油替代作用展开细化分析研究。建议成品油销售企业根据各区域新能源汽车发展特色制定油品销售规划,分区域推进综合能源服务站的布局与建设,同时助力公共领域新能源汽车的应用推广工作,以应对新能源汽车对成品油的替代,加快世界一流综合性国际能源公司的建设。

数据要素、新型基础设施与产业结构调整路径

数据要素和新型基础设施在各个产业发挥日益重要的作用。不同产业对数据要素和新型基础设施的应用方式和利用效率存在差异,影响产业结构调整路径。文章构建包含两个生产部门的动态一般均衡模型,用于代表不同产业或同一产业内的不同企业。每个部门将数据作为新生产要素、将新型基础设施作为数据扩展型技术,与传统生产要素结合形成新的生产函数。不同部门的数据产出弹性、数据和传统要素的替代弹性存在差异,这是影响产业结构调整路径的重要因素。通过理论模型推导和数值模拟研究,文章发现:在不同产业之间,由于产品替代弹性较低,提高数据要素和新型基础设施的数量会导致数据产出弹性较高、数据和传统要素的替代弹性较高的产业产出提高,但其产品价格和名义产出降低,促使资本和劳动力流向数据利用效率低的产业。这一过程将改变资本和劳动力的价格,影响劳动收入份额。在同一产业内部,由于不同企业间的产品替代弹性较高,数据要素和新型基础设施导致资本和劳动力流向数据利用效率高的企业,优化生产要素配置,推动整个产业的数字化转型。新型基础设施建设对产业结构调整的推动作用受到数据要素的调节,且最终的影响方向和路径与数据要素一致,可以通过调整需求结构引导更具针对性和长效的产业结构调整。最后,文章提出数据要素、新型基础设施建设的相关政策建议,并对产业结构调整可能导致的问题提出对策。

PFAS在石油工业的应用及其替代研究进展

介绍了欧盟PFAS限制提案进展。综述了目前非聚合含氟化学品和含氟聚合物在石油工业中的应用,以及非氟类替代品在石油工业的应用情况,并对替代品进行了初步评估。

论减轻损失规则

减轻损失规则的重要内容是减轻损失义务,包含两方面的意思:第一,原告有义务采取积极措施(positive steps)将被告违约所致损失降至最低范围;第二,在被告适当履行合同的情况下,原告实施某些行为是适当的,但在被告已经违约的场合,原告倘若再实施这些行为,就会不公正地扩大违约造成的损失(unjustifiably augment the loss)。减轻损失义务大多源自法律的规定,也有基于当事人的约定产生的情形。减轻损失的措施可以类型化为停止履行、替代安排、守约方与违约方再协商、继续履行。守约方应当采取什么样减轻损失的措施,要取决于周围情事。其措施是否适当,宜以一个理性人、经济人的认识作为判断标准比较合理,并且对这种适当的要求不宜太高。在程序方面,要根据双方当事人提供的证据做出事实的认定。是否需要将选择措施之事预先通知违约方,主流观点主张,虽然通知并非“坏事”,但这充其量只是看整个行为是否合理的其中一个因素,而且不一定是重要因素。守约方采取减轻损失的措施支出的合理费用,应由违约方负责赔偿。守约方违反减轻损失的义务,不向违约方就此承担违约责任,但由此扩大的损失无权请求违约方予以赔偿。

饲用微生态制剂的研究进展及应用

近年来,随着“限抗令”的实施,更多的饲用替抗产品被研发并投入使用,微生态制剂即为其中之一。饲用微生态制剂以其维持肠道菌群平衡、提高免疫力等功效跻身饲用替抗产品行列。文中着重论述了微生态制剂的分类、作用机理和在养殖业的应用,为今后的饲料添加剂的研发应用提供理论基础。

PFI磨预处理提高桉木浆纤维反应活性的研究

采用PFI磨对桉木漂白化学浆进行预处理后,以丙烯酰氯为酯化试剂,在球磨机中进行酯化反应,通过纤维质量分析仪、光学显微镜、X射线衍射(XRD)和傅里叶红外光谱(FT-IR)对纤维的形貌和结构进行了分析,并进一步考察了酯化条件对纤维素反应活性的影响。研究结果表明:随着PFI磨转数的增加,纤维长度、纤维宽度减小,细小纤维比例显著提高,由19.86%增大至38.47%。经PFI磨打浆后,纸浆纤维表面纤丝化明显,其结晶区域部分遭破坏,结晶度由72.7%降低至66.9%;XRD结果表明:反应过程中酯化产物的结晶结构发生了改变。FT-IR结果表明:PFI磨解纤维与丙烯酰氯经球磨发生酯化反应得到丙烯酰基纤维素。酯化产物的取代度(D_(S))随着PFI磨转数的增加而增大;与未经预处理纤维相比,反应产物的D_(S)明显增加,最高可达2.38,此时的反应条件为PFI磨预处理24000 r,纤维素与丙烯酰氯的物质的量比1∶6,球磨反应时间48 h。

新型N-取代靛红杂合喹唑啉类化合物的合成及其抗肿瘤活性

以N′-(2-氰基-4-碘苯基)-N,N-二甲基甲脒和靛红为起始原料,N′-(2-氰基-4-碘苯基)-N,N-二甲基甲脒先与芳胺发生Dimroth重排,再进行Suzuki偶联生成化合物4a~4c;靛红经1-位取代、3-位成腙生成化合物7a~7c;最后经化合物4a~4c和7a~7c之间的亲核加成,合成了9个新型N-取代的靛红杂合喹唑啉类化合物8a~8i。利用核磁共振、红外光谱和高分辨质谱对目标化合物进行表征,并以SW480、A431、NCI-H1975和A549人肿瘤细胞为受试细胞,采用MTT法对9个目标化合物的抗肿瘤活性进行评价。结果表明:大部分化合物均具有较强的肿瘤细胞增殖抑制作用,其中化合物8a、8b、8e、8g对4种受试细胞均具有良好的生长抑制作用,优于阳性对照拉帕替尼和吉非替尼。可见,当在喹唑啉单元4-位引入3-乙炔基苯氨基时,对肿瘤细胞的增殖抑制活性较好;当引入3-氯-4-氟苯氨基和3-氯-4-(3-氟苄氧基)苯氨基时,对肿瘤细胞的增殖抑制活性次之。当靛红单元5-位无取代基或被F取代时,对肿瘤细胞的增殖抑制活性较好;当被Cl取代时,对肿瘤细胞的增殖抑制活性较差。