The goal of the arterial graft design problem is to find an optimal graft built on an occluded artery, which can be mathematically modeled by a fluid based shape optimization problem. The smoothness of the graft is on...The goal of the arterial graft design problem is to find an optimal graft built on an occluded artery, which can be mathematically modeled by a fluid based shape optimization problem. The smoothness of the graft is one of the important aspects in the arterial graft design problem since it affects the flow of the blood significantly. As an attractive design tool for this problem, level set methods are quite efficient for obtaining better shape of the graft. In this paper, a cubic spline level set method and a radial basis function level set method are designed to solve the arterial graft design problem. In both approaches, the shape of the arterial graft is implicitly tracked by the zero-level contour of a level set function and a high level of smoothness of the graft is achieved. Numerical results show the efficiency of the algorithms in the arterial graft design.展开更多
By dynamic method under UV irradiation, commercial melt-blown polypropylene (PPMB) filter element was modified with acrylamide (AAm) using benzophenone (BP) as initiator. Attenuated total reflection-Fourier tran...By dynamic method under UV irradiation, commercial melt-blown polypropylene (PPMB) filter element was modified with acrylamide (AAm) using benzophenone (BP) as initiator. Attenuated total reflection-Fourier transform infrared spectroscopy and scanning electron microscope verified that polyacrylamide chain was grafted on the fiber surface of PPMB filter element. Elemental content analysis with energy dispersive X-ray of fibers revealed that the polymerization content in the inner part of filter element was relatively higher than that in the outer. Degree of grafting changed with initiator concentration, monomer concentration, reaction temperature and reached 2.6% at the reaction condition: CBp=0.06 mol/L, CAAm=2.0 mol/L, irradiation time: 80 min, temperature: 60℃. Relative water flux altered with the hydrophilicity and pore size of filter element. In the antifouling test, the modified filter gave greater flux recovery (approximately 70%) after filtration of the water extract of Liuweidihuang, suggesting that the fouling layer was more easily reversible due to the hydrophilic nature of the modified filter.展开更多
目的:观察比较腋窝皱襞切口薄皮瓣法及小切口全厚皮片法用于腋臭治疗的疗效。方法:选取2016年11月-2021年11月笔者医院行腋臭手术治疗的78例患者,依据手术方式不同分为观察组和对照组,每组39例。观察组行腋窝皱襞切口薄皮瓣法,对照组行...目的:观察比较腋窝皱襞切口薄皮瓣法及小切口全厚皮片法用于腋臭治疗的疗效。方法:选取2016年11月-2021年11月笔者医院行腋臭手术治疗的78例患者,依据手术方式不同分为观察组和对照组,每组39例。观察组行腋窝皱襞切口薄皮瓣法,对照组行小切口全厚皮片法。比较两组患者临床疗效、围术期各项指标、温哥华瘢痕量表(Vancouver scar scale,VSS)评分、患者与观察者瘢痕评估量表(Scar assessment scale for patients and observers,POSAS)评分及并发症发生情况。结果:观察组总有效率高于对照组,复发率低于对照组,手术时间、拆线时间、愈合时间均短于对照组,出血量少于对照组,瘢痕长度短于对照组,并发症总发生率低于对照组,差异均有统计学意义(P<0.05);术后6个月,观察组VSS、PSAS、OSAS评分均低于对照组(P<0.05)。结论:腋窝皱襞切口薄皮瓣法治疗腋臭疗效优于小切口全厚皮片法,该法复发率低,瘢痕轻,并发症少,是治疗腋臭较为理想的一种术式。展开更多
Silylated Ti-grafted hexagonal mesoporous silica (HMS) catalyst was prepared by the chemical vapor deposition (CVD) using TIC14 as titanium source and hexamethyldisilazane (HMDSZ) as silylating agent. The sample...Silylated Ti-grafted hexagonal mesoporous silica (HMS) catalyst was prepared by the chemical vapor deposition (CVD) using TIC14 as titanium source and hexamethyldisilazane (HMDSZ) as silylating agent. The samples were characterized by XRD, N2- adsorption, PTIR, 29Si NMR, DR UV-vis, and evaluated by epoxidation of styrene, propylene, cyclohexene, and 1-hexene with cumene hydroperoxide (CLIP) as oxidant, respectively. It is revealed that the catalyst possesses typical mesoporous structure, high hydrophobicity and highly dispersed tetracoordinated titanium sites and hence exhibits excellent performance in epoxidation of olefins.展开更多
Superabsorbents starch grafted sodium polyacrylate was synthesized by inverse suspension polymerization, using toluene as the continuous phase, potassium persulfate as the initiator. The effect of reaction parameters,...Superabsorbents starch grafted sodium polyacrylate was synthesized by inverse suspension polymerization, using toluene as the continuous phase, potassium persulfate as the initiator. The effect of reaction parameters, such as starch pretreatment temperature, neutralization degree of monomer, reaction time and temperature, concentration of initiator, molar ratio of monomer and starch, on water absorbency of the starch grafted polymer was studied. The effects of the last two parameters were investigated by uniform design method, and the prediction equation was obtained.展开更多
Previously, Polyvinyl Alcohol (PVA) and phenolic resin were used for resin impregnated bamboo fiber reinforced PP composites which was manufactures for resin impregnated bamboo fiber with polypropylene (PP). Resin imp...Previously, Polyvinyl Alcohol (PVA) and phenolic resin were used for resin impregnated bamboo fiber reinforced PP composites which was manufactures for resin impregnated bamboo fiber with polypropylene (PP). Resin impregnation method can show improvement on tensile strength of fiber. However, to reduce the contact surface area and low inter-facial shear strength (IFSS) between impregnated resin and matrix, using 40% weight fraction of bamboo fiber in PP matrix, PVA impregnated composites with mean flexural and tensile strength 10% higher than untreated composites were produced butphenolic resin impregnated fiber reinforced composition’s mechanical properties were decreased. In this study maleic anhydride grafted polypropylene (MAPP) was used to increase interfacial shear strength between resin impregnated fiber and PP. With 10% MAPP, IFSS between resin impregnated fiber and PP increased more than 100% and reinforced composites. MAPP with untreated, phenolic resin and PVA impregnated cases showed similar mechanical properties. Yet in water absorption test, the PVA treatment with bamboo/PP composites increased water absorption ratio. But with 10% MAPP, matrix PP water absorption ratio decreased like phenolic resin impregnated fiber reinforced composites. 10% MAPP with resin impregnated bamboo fiber reinforced PP composites can improve IFSS, mechanical properties of composite and can decrease water absorption PVA resin impregnated bamboo fiber reinforced composites.展开更多
基金Supported by National Foundation of Natural Science(11471092)Natural Science Foundation of Zhejiang Province(LZ13A010003)Foundation of Zhejiang Educational Committee(Y201121891)
文摘The goal of the arterial graft design problem is to find an optimal graft built on an occluded artery, which can be mathematically modeled by a fluid based shape optimization problem. The smoothness of the graft is one of the important aspects in the arterial graft design problem since it affects the flow of the blood significantly. As an attractive design tool for this problem, level set methods are quite efficient for obtaining better shape of the graft. In this paper, a cubic spline level set method and a radial basis function level set method are designed to solve the arterial graft design problem. In both approaches, the shape of the arterial graft is implicitly tracked by the zero-level contour of a level set function and a high level of smoothness of the graft is achieved. Numerical results show the efficiency of the algorithms in the arterial graft design.
基金Project supported by the Natural Science Foundation of Beijing(No.2051002)Science and Technology Programme of Beijing(No.D0205004040421)
文摘By dynamic method under UV irradiation, commercial melt-blown polypropylene (PPMB) filter element was modified with acrylamide (AAm) using benzophenone (BP) as initiator. Attenuated total reflection-Fourier transform infrared spectroscopy and scanning electron microscope verified that polyacrylamide chain was grafted on the fiber surface of PPMB filter element. Elemental content analysis with energy dispersive X-ray of fibers revealed that the polymerization content in the inner part of filter element was relatively higher than that in the outer. Degree of grafting changed with initiator concentration, monomer concentration, reaction temperature and reached 2.6% at the reaction condition: CBp=0.06 mol/L, CAAm=2.0 mol/L, irradiation time: 80 min, temperature: 60℃. Relative water flux altered with the hydrophilicity and pore size of filter element. In the antifouling test, the modified filter gave greater flux recovery (approximately 70%) after filtration of the water extract of Liuweidihuang, suggesting that the fouling layer was more easily reversible due to the hydrophilic nature of the modified filter.
文摘目的:观察比较腋窝皱襞切口薄皮瓣法及小切口全厚皮片法用于腋臭治疗的疗效。方法:选取2016年11月-2021年11月笔者医院行腋臭手术治疗的78例患者,依据手术方式不同分为观察组和对照组,每组39例。观察组行腋窝皱襞切口薄皮瓣法,对照组行小切口全厚皮片法。比较两组患者临床疗效、围术期各项指标、温哥华瘢痕量表(Vancouver scar scale,VSS)评分、患者与观察者瘢痕评估量表(Scar assessment scale for patients and observers,POSAS)评分及并发症发生情况。结果:观察组总有效率高于对照组,复发率低于对照组,手术时间、拆线时间、愈合时间均短于对照组,出血量少于对照组,瘢痕长度短于对照组,并发症总发生率低于对照组,差异均有统计学意义(P<0.05);术后6个月,观察组VSS、PSAS、OSAS评分均低于对照组(P<0.05)。结论:腋窝皱襞切口薄皮瓣法治疗腋臭疗效优于小切口全厚皮片法,该法复发率低,瘢痕轻,并发症少,是治疗腋臭较为理想的一种术式。
文摘Silylated Ti-grafted hexagonal mesoporous silica (HMS) catalyst was prepared by the chemical vapor deposition (CVD) using TIC14 as titanium source and hexamethyldisilazane (HMDSZ) as silylating agent. The samples were characterized by XRD, N2- adsorption, PTIR, 29Si NMR, DR UV-vis, and evaluated by epoxidation of styrene, propylene, cyclohexene, and 1-hexene with cumene hydroperoxide (CLIP) as oxidant, respectively. It is revealed that the catalyst possesses typical mesoporous structure, high hydrophobicity and highly dispersed tetracoordinated titanium sites and hence exhibits excellent performance in epoxidation of olefins.
文摘Superabsorbents starch grafted sodium polyacrylate was synthesized by inverse suspension polymerization, using toluene as the continuous phase, potassium persulfate as the initiator. The effect of reaction parameters, such as starch pretreatment temperature, neutralization degree of monomer, reaction time and temperature, concentration of initiator, molar ratio of monomer and starch, on water absorbency of the starch grafted polymer was studied. The effects of the last two parameters were investigated by uniform design method, and the prediction equation was obtained.
文摘Previously, Polyvinyl Alcohol (PVA) and phenolic resin were used for resin impregnated bamboo fiber reinforced PP composites which was manufactures for resin impregnated bamboo fiber with polypropylene (PP). Resin impregnation method can show improvement on tensile strength of fiber. However, to reduce the contact surface area and low inter-facial shear strength (IFSS) between impregnated resin and matrix, using 40% weight fraction of bamboo fiber in PP matrix, PVA impregnated composites with mean flexural and tensile strength 10% higher than untreated composites were produced butphenolic resin impregnated fiber reinforced composition’s mechanical properties were decreased. In this study maleic anhydride grafted polypropylene (MAPP) was used to increase interfacial shear strength between resin impregnated fiber and PP. With 10% MAPP, IFSS between resin impregnated fiber and PP increased more than 100% and reinforced composites. MAPP with untreated, phenolic resin and PVA impregnated cases showed similar mechanical properties. Yet in water absorption test, the PVA treatment with bamboo/PP composites increased water absorption ratio. But with 10% MAPP, matrix PP water absorption ratio decreased like phenolic resin impregnated fiber reinforced composites. 10% MAPP with resin impregnated bamboo fiber reinforced PP composites can improve IFSS, mechanical properties of composite and can decrease water absorption PVA resin impregnated bamboo fiber reinforced composites.