Comparison of Satellite Cloud Image and Radar of Precipitation Process on July 31st,2007

Based on the data of satellite cloud image and Doppler radar,the rainstorm process from July 31st,2007 to August 1st,2007 in Liaoning was analyzed.The precipitation in Fushun and Haicheng was more than 100 mm,and 6 h precipitation in Fushun and Dandong was more than 50 mm.Through the analysis of strong precipitation period,the structure of clouds had a little decline from the stage of development to maturity.The gray value and gradient degree around were both larger in the center of heavy precipitation.

Cloudiness regime shift during 1946—1992 recorded by coral in the South China Sea

By extracting and comparing long-term trend components of coral gray value, sea surface temperature, cloudiness, and net heat flux for the period of 1946-1992, the relationships among them are addressed. There exists a prominent regime shift in the cloudiness associated with the corresponding variabilities of sea surface temperature and net heat flux occurred in the mid-1960s, which can be successfully recorded by coral gray value, a climatic proxy. Long-term cloudiness variations in the South China Sea are completely opposite to the equatorial western Pacific in the past five decades, whereas they share a similar trend to that over Asian monsoon prevailing waters. The fact that the coral gray value is highly correlated to cloudiness provides a unique perspective on utilizing this coral to study cloudiness variations in the pre-instrumental period.

X-ray Microtomography of the Carbonation Front Shape Evolution of Cement Mortar and Modeling of Accelerated Carbonation Reaction

In situ monitoring of the microstructure evolution of cement mortar in accelerated carbonation reaction for different carbonation ages was carried out by X-ray computed tomography （XCT）. And the carbonation degrees of different time were measured by the volume fraction of uncarbonated and carbonated parts. Meanwhile, we presented a model for the carbonation of cement mortar by means of X-ray computed tomography （XCT）. Based on the principles of chemical engineering processes, the reacted products become a solid inert ash layer. Finally, the model was validated with results of accelerated carbonation of cement mortar. The model is thus able to reasonably predict the carbonation ohenomena for accelerated conditions.

Nondestructive Microstructure Analysis of the Carbonation Evolution Process in Hardened Binder Paste Containing Blast-furnace Slag by X-ray CT

We used micro-XCT（X-ray computed tomography） to in-situ investigate the microstructure evolution of hardened binder paste containing different contents （0%, 30%, 50% and 70%） of blast-furnace slag at different carbonation time （O, 3, 7 and 14 days）, respectively. The carbonation front shape, the degrees of carbonation and cracks spatial distribution were studied for hardened binder paste containing BFS. In addition, the porosity and pore volume distribution of macro-pore were measured at different carbonation ages. The results reveal that the degree of carbonation at different times can be measured by the volume fraction of the uncarbonated and carbonated parts.

3D particle streak velocimetry by defocused imaging

Particle streak velocimetry (PSV) has become one of the important branches of flow filed measurements. It extracts velocity information from particle trajectories captured by single frame long exposure images. Since the defocus of moving particle is inevitable during a long exposure time and under a large magnification, a novel three-dimensional (3D) velocity measurement method named defocusing particle streak velocimetry (DPSV) is proposed in this paper. On the one hand, an extension from two-dimensional (2D) to 3D velocity measurement with a monocular system is carried out. The depth information of the particle, which reflects the position in the third dimension, is indicated by the defocusing degree (characteristic parameter σ) of the particle images. The variation of σ along the trajectory is recognized by surface fitting of the gray value distribution of particle images, assuming that σ varies linearly along the trajectory. On the other hand, based on the linear fitting for the straight trajectory, an arc fitting model is developed for curved trajectories which are commonly captured in turbulent flow. The relationship between σ and the particle depth position z is experimentally calibrated using a LED light and a diaphragm. Finally, the DPSV method is verified in a submerged jet flow field as well as in a microchannel flow field to obtain the 3D velocity field with single monocular system.

The role of varied metal protrusions on the conductor surfaces in corona discharge subjected to DC high voltages

Conductor corona performance is significant in the evaluation of electromagnetic environment for high voltage power transmission lines. The influence of artificial contaminated conductors on corona discharge was studied and turned out to be complicated. The ionized field strength on the corona cage was measured by field mill. Meanwhile, photos of corona plumes were photographed and grayed to quantitate the corona discharge intensity. Subsequently, a calculation model for equivalent electric field strength coefficient was established to evaluate the discharge intensity of conductors in coaxial cylindrical electrode. It could be found the computational results achieved an agreement with the observed experimental phenomena. By means of simulation results, a reasonable explanation was given to the finding that the closer the distance between the two protrusions was, the lower the corona discharge intensity and higher corona inception voltage of the conductors would be. In summary, the distributions of corona sources played an important role in the corona discharge and this work would provide an important reference for the evaluation of corona effects on the surface of contaminated conductors.