Heat transfer and temperature evolution in underground mininginduced overburden fracture and ground fissures: Optimal time window of UAV infrared monitoring

Heat transfer and temperature evolution in overburden fracture and ground fissures are one of the essential topics for the identification of ground fissures via unmanned aerial vehicle(UAV) infrared imager. In this study, discrete element software UDEC was employed to investigate the overburden fracture field under different mining conditions. Multiphysics software COMSOL were employed to investigate heat transfer and temperature evolution of overburden fracture and ground fissures under the influence of mining condition, fissure depth, fissure width, and month alternation. The UAV infrared field measurements also provided a calibration for numerical simulation. The results showed that for ground fissures connected to underground goaf(Fissure Ⅰ), the temperature difference increased with larger mining height and shallow buried depth. In addition, Fissure Ⅰ located in the boundary of the goaf have a greater temperature difference and is easier to be identified than fissures located above the mining goaf. For ground fissures having no connection to underground goaf(Fissure Ⅱ), the heat transfer is affected by the internal resistance of the overlying strata fracture when the depth of Fissure Ⅱ is greater than10 m, the temperature of Fissure Ⅱ gradually equals to the ground temperature as the fissures’ depth increases, and the fissures are difficult to be identified. The identification effect is most obvious for fissures larger than 16 cm under the same depth. In spring and summer, UAV infrared identification of mining fissures should be carried out during nighttime. This study provides the basis for the optimal time and season for the UAV infrared identification of different types of mining ground fissures.

Crack mechanism of ground fissures in loess layer of Fenwei Basin, China

The Fenwei Basin, covered by loess, experiences severe ground fissure disasters. These disasters disrupt the continuity of the loess and pose significant threats to engineering construction safety along transportation routes. Nevertheless, the crack characteristics and the influence zone of ground fissures in the loess layer remain inadequately investigated. To effectively prevent and control ground fissure disasters, physical model tests and the PFC(particle flow code) numerical simulation method are used to investigate the crack mechanism of buried ground fissures in the loess layer. The results show that there are two main cracks in the layer profile, which have a Y-shape morphology. As the dip angle of the preset cracks increased from 60° to 90°, the main deformation zone at the surface gradually shifted towards the footwall. The process of crack propagation from depth to surface is divided into five stages. Additionally, the results confirm the accuracy of the width of the rupture zone d2in the footwall calculated by the cantilever beam theory. These findings can offer theoretical guidance for determining the avoidance distance of ground fissures in loess regions, as well as for implementing disaster prevention and corresponding control measures for various stages of buried ground fissure propagation.

Ground fissure development regularity and formation mechanism of shallow buried coal seam mining with Karst landform in Jiaozi coal mine: a case study

A comprehensive study was undertaken at Jiaozi coal mine to investigate the development regularity of ground fissures in shallow buried coal seam mining with Karst landform,shedding light on the development type,geographical distribution,dynamic development process,and failure mechanism of these ground fissures by employing field monitoring,numerical simulation,and theoretical analysis.The findings demonstrate that ground fissure development has an obvious feature of subregion,and its geographical distribution is significantly affected by topography.Tensile type,open type,and stepped type are three different categories of ground fissure.Ground fissures emerge dynamically as the panel advances,and they typically develop with a distance of less than periodic weighting step distance in advance of panel advancing position.Ground fissures present the dynamic development feature,temporary fissure has the ability of self-healing.The dynamic development process of ground fissure with closed-distance coal seam repeated mining is expounded,and the development scale is a dynamic development stage of“closure→expansion→stabilized”on the basis of the original development scale.From the perspective of topsoil deformation,the computation model considering two points movement vectors towards two directions of the gob and the ground surface is established,the development criterion considering the critical deformation value of topsoil is obtained.The mechanical model of hinged structure of inclined body is proposed to clarify the ground fissure development,and the interaction between slope activity and ground fissure development is expounded.These research results fulfill the gap of ground fissures about development regularity and formation mechanism,and can contribute to ground fissure prevention and treatment with Karst landform.

Research on ground fissure origins and mechanisms in Hebei Plain,P.R.China

Ground fissure hazards frequently emerge in Hebei Plain, which damage roads, dams, buildings and farmland. The paper reviews and analyses current state of knowledge and research into ground fissure and geological environment in Hebei Plain. It is shown that the level of research and investigation is in some aspects insufficient. Knowledge is lacking in the use of corresponding geological concept models for specific ground fissures, three-dimensional numerical simulations of ground fissures caused by pumping through soil with pre-existing fractures, numerical simulations of ground fissures caused by dislocation in intersection faults, and the failure criterion and the constitutive relationship of rock and soil. Furthermore, we put forward geological concept models for ground fissure formation following the dislocation of a buried intersection fault, over-exploitation of groundwater and its compound origin mechanisms in order to provide scientific evidence for the quantitative analysis.

Mechanical behavior of underground pipe gallery structure considering ground fissure

The mechanical behavior of underground pipe gallery is a key research issue due to the static/dynamic states which exist in a ground fissure area.This study took an underground pipe gallery project in Xi’an,China as the research object.We analyzed the stress/strain characteristics of the pipe gallery structure and surrounding soil under static/dynamic conditions by the numerical simulation methods in detail.Based on the results,we proposed a theoretical calculation model for the pipe gallery structure considering the influence of the ground fissure,and combined with engineering examples for calculation and discussion.Subsequent results showed that:(1)the effective activity range of ground fissure on the deformation of the pipe gallery structure was mainly from 0.0 m(horizontal direction of ground fissure)to 32.0 m.In activity range,the pipe gallery structure is prone to failure,owing to the large soil deformation in the vertical direction;(2)with the increase of ground fissure settlement,a stress reduction area near the ground fissure appeared at the bottom of the hanging wall of the pipe gallery structure,and a local void phenomenon was revealed.The length of the local void is 6.0 m to 8.0 m under the maximum settlement(0.8 m)of the ground fissure;(3)Compared with the static conditions,the vertical and horizontal displacements of the pipe gallery structure and surrounding soil under the seismic action were little,and there were tensioncompression and torsion-shear effects in corner of the square pipe gallery structure(with a stress concentration phenomenon).The deformation law of pipe gallery structure and surrounding soil considering ground fissure and the theoretical model of pipe gallery structure established in this paper can provide reference for practical engineering.

Ground fissure hazards in USA and China

Tremendous losses were caused by ground fissure hazard both in USA and China. Six states of southwestern USA and seven provinces of central China were affected by the destructive ground fissures. The aseismic ground fissure hazards usually take place in land subsidence area. The comparison of the two countries' ground fissures were given including ground fissure formation, evolution, mechanics of destruction and countermeasures against them. The destructive ground fissures occurred about a half century earlier in USA than in China The mechanisms of various ground fissures were analyzed with interdisciplinary studies. It has been found that the preexisted faults are serving as the bases of forming modem ground fissure, and human activities, e.g. over pumping ground water, or oil, can accelerate the creeping of the fissures and make them destructive to many kinds of civil engineering. The countermeasures to mitigate ground fissure hazard were put forward, not only in science and technology but also in social administration. The successful practices in the two countries were introduced as examples.

Model test study on the formation and development of underground erosion ground fissures in the Kenya Rift Valley

The Kenya Rift Valley is relatively prone to underground erosion ground fissures and associated disasters,which gravely hinder local engineering construction and economic development.In this research,we performed field and experimental studies on ground fissures in the Kenya Rift Valley area,and determined the structural characteristics of underground erosion fissures.Based on a geological survey of the area,we generalized a geological model for typical ground fissures and reproduced the intermediate process of ground fissure propagation using a large-scale physical model test.Further,the development process of underground erosion fissures were categorized into four stages:uniform infiltration,preferential infiltration,cavity expansion,and collapse formation stages.During the development of underground erosion fissures,water content was distributed symmetrically along the fissures,and these fissures acted as the primary infiltration paths of water.When the ground collapsed,the increase in negative pore water pressure was greater,whereas the increase in positive pore water pressure was less in the shallow soil;moreover,in the deep soil,the increase in positive pore water pressure was greater than that of negative pore water pressure.Additionally,the earth pressure increment initially increased and then decreased with the development of erosion.During underground erosion collapse,the water content and pore water pressure appeared to increase and decrease rapidly.These results can be employed to predict the occurrence of underground erosion ground fissures and the resulting soil collapse.

A Comprehensive Method for the Risk Assessment of Ground Fissures:Case Study of the Eastern Weihe Basin

Ground fissures are influenced by the coupling of geological factors and human activi-ties.They threaten the safety of infrastructure and restrict town planning in many areas in China.One of the area most severely affected by ground fissures is the Weihe Basin in North China,which has the most extensive distribution of ground fissures and all the elements that control their occurrence,pro-viding an ideal study area for the study of ground fissures.In this study,we took the eastern Weihe Ba-sin as the study area and determined the distribution and hazard characteristics of ground fissures via field investigation.Based on the analytic hierarchy process,we propose a multi-level,comprehensive method for evaluating the hazards of ground fissures.This method considers the geological back-ground,development status,and triggering factors of ground fissures,including all nine currently known assessment indices of ground fissures.We used judgment matrices to rank the constructed ground fissure assessment index system at the single and total levels and quantified the nine assessment indices of ground fissures according to the field survey data.Finally,we plotted the ground fissure risk zoning map and evaluated the ground fissure risk at the study area.Our findings indicated that the proposed method could facilitate ground fissure hazard assessment and prediction and provide support for hazard prevention and urban/rural planning.

Influences of soil hydraulic and mechanical parameters on land subsidence and ground fissures caused by groundwater exploitation

In order to study the influences of hydraulic and mechanical parameters on land subsidence and ground fissure caused by groundwater exploitation, based on the Biot＇s consolidation theory and combined with the nonlinear rheological theory of soil, the constitutive relation in Biot＇s consolidation theory is extended to include the viscoelastic plasticity, and the dynamic relationship among the porosity, the hydraulic conductivity, the parameters of soil deformation and effective stress is also considered, a three-dimensional full coupling mathematical model is established and applied to the study of land subsidence and ground fissures of Cangzhou in Hebei Province, through the analysis of parameter sensitivity, the influences of soil hydraulic and mechanical parame-ters on land subsidence and ground fissure are revealed. It is shown that the elastic modulus E , the Poisson ratio, the specific yield m and the soil cohesion c have a great influence on the land subsidence and the ground fissures. In addition, the vertical hydraulic conductivity zk and the horizontal hydraulic conductivity ks also have a great influence on the land subsidence and the ground fissures.

Formation Mechanism of Ground Fissures Originated from the Hanging Wall of Normal Fault:A Case in Fen-Wei Basin,China

This paper takes Fen-Wei Basin(FWB)as a case to study the ground fissures controlled by normal fault.Based on the field investigation,geophysical exploration,drilling,GNSS data and numerical calculation,the characteristics and mechanism of ground fissures originated from the hanging wall of normal faults are revealed.The results show that the distribution of ground fissures in the hanging wall and heading wall of the active faults is not uniform.Ground fissures are mostly distributed in the hanging wall of active faults and show a linear distribution on the surface,their strike is consistent with the fault,mainly characterized by vertical offset and horizontal tension.Ground fissures destroy the farmland and building foundation through which they pass and cause the rupture or displacement.In profile section,the ground fissure shows the characteristics of normal faults and dislocates the strata,and is connected with the underlying faults.Numerical analysis shows that the vertical displacement of normal fault activity in hanging wall is much larger than that in heading wall,which is the reason that tectonic ground fissures mainly originate from hanging wall.The range of dangerous area of ground fissures is controlled by the depth of fault,the strength of the ground fissures disaster is mainly controlled by the activity of fault.The formation of the ground fissures originated from the hanging wall of the fault experienced three stages:the main fault activity stage,the secondary fault activity stage and the fissure formation stage.

Horizontal aquifer movement induced by groundwater pumping and its applications to the analysis of some geological disasters

Based on Darcy Gersevanov law concerning a flow relation between water and solids, we derive the horizontal movement of solid frame resulted from a discharging well in a Theis Thiem confined system, and further analyze the relations among the horizontal movements and pumped time t as well as radius r from the discharging well. As applications of the theory, we propose some new interperations for ground fissure activity and casing failures induced by groundwater withdrawal or injection.

Seismogenic Structure of the April 20, 2013, Lushan Ms7 Earthquake in Sichuan

At 08：02 on April 20, 2013, a Ms7.0 earthquake occurred in Lushan, Ya＇an, in the Longmenshan fault zone, Sichuan. The epicenter was located between Taiping Town and Shuangshi Town, Lushan County and the maximum earthquake intensity at the epicenter reached class IX. Field investigations in the epicenter area found that, although buildings were seriously damaged, no obvious surface rupture structure was produced, only some ground fissures and sand blows and water ejection phenomena being seen. An integrated analysis of high-resolution remote sensing image interpretation, mainshock and aftershock distribution, and focal mechanism solutions indicated that this earthquake was an independent rupturing event in the southwestern segment of the Longmenshan fault zone, belonging to the thrust-type earthquake. Ruptures occurred along the south-central segment of the Shuangshi-Dachuan fault and the principal rupture plane dipped SW at 33-43% It is inferred that the Lushan earthquake might be related to the ramp activity of the basal detachment zone （13-19 kin） of the Longmenshan fault zone. Historically, there occurred at least two Ms6-6.5 earthquakes along the Shuangshi-Dachuan fault zone; thus it is thought that the Lushan earthquake, different from the Wenchuan earthquake, was a characteristic one in the southwestern segment of the Longmenshan fault zone. In-situ stress measurements indicated the Lushan earthquake was the result of stress release of the southwestern segment of the Longmenshan fault zone after the Wenchuan earthquake. This paper analyzes the tectonic setting of the seismogenic structure of this earthquake.

Two-Dimensional Ground Deformation Monitoring in Shanghai Based on SBAS and MSBAS InSAR Methods

Shanghai has experienced the greatest land subsidence in China in the past sixty years and produced undesirable environmental impact. However, horizontal ground deformation has not been understood yet. Therefore ground deformation monitoring together with the analysis of its driving forces are critical for geo-hazards early-warning, city planning and sustainable urbanization in Shanghai. In this paper, two-dimensional ground deformation monitoring was performed in Shanghai with SBAS and MSBAS InSAR methods. Twenty-nine Multi-Look Fine 6 （MF6） Radarsat-2 SLC data acquired during 2011-2013 were used to derive vertical ground deformation. Meanwhile, six descending Multi-Look Fine 6 （MF6） and four ascending Multi-Look Fine 2 （MF2） spanning April to August, 2008, were used to derive vertical and horizontal ground deformation during the observation period. The results indicate that vertical and horizontal deformations in 2008 were not homogeneously distributed in different districts ranging from 0-2 cm/year. Vertical deformation rate during 2011-2013 were decreased to less than 1 cm/year in most district of Shanghai area. Activities from groundwater exploitation and rapid urbanization are responsible for most of the ground deformation in Shanghai. Thus, future ground deformation in vertical and horizontal directions should be warranted.

The ground deformation field induced by a listric thrust fault with an overburden soil layer

The surface deformation field induced by a listric thrust fault with a thick, overburden soil layer is studied in this paper by the finite element method （FEM）. The results show： （a） The maximum slip induced by the buried fault is not located at upper tip of the fault, but below it. （b） The vertical displacement changes remarkably near the fault, forming a fault scarp. With the increase of the soil layer thickness, the height of the scarp is decreased for the same earthquake magnitude. （c） The strong strain zone on the surface is localized near the projection of the fault tip on the ground surface. The horizontal strains in the zone are in tension above the hanging wall and in compression above the foot wall, and the vertical strains in the zone are vice versa, which is favorable for tensile- shear, compression-shear fissures above hanging wall and foot wall, respectively.

PIV TECHNIQUE AND ITS APPLICATION IN SHIP HYDRODYNAMICS

As one of up to date measurement technique, PIV techniques has been widely accepted and applied. There are a good many diffculties when it is implemented in complicated engineering, e.g.,in naval hydrodynamics. Especially, it is quite a technical challenge to utilize PIV technique in large towing tank. This paper presents a brief overview of a large PIV system used in and outside large towing tank at the National Laboratory of Hydrodynamics, Wuxi, China. Several examples are given to illustrate the wonderful possibilities of using the PIV technique in hydrodynamics research. KEY WORDS: PIV, flow visualization, seeding particle, towing tank, circulating water channelh the whole.The self similarity is of predictive significance to the study of the further development of ground fissures in the study area.