Multi-objective Optimization of Multi-Agent Elevator Group Control System Based on Real-time Particle Swarm Optimization Algorithm

In order to get a globally optimized solution for the Elevator Group Control System (EGCS) scheduling problem, an algorithm with an overall optimization function is needed. In this study, Real-time Particle Swarm Optimization (RPSO) is proposed to find an optimal solution to the EGCS scheduling problem. Different traffic patterns and controller mechanisms for EGCS are analyzed. This study focuses on up-peak traffic because of its critical importance to modern office buildings. Simulation results show that EGCS based on Multi-Agent Systems (MAS) using RPSO gives good results for up-peak EGCS scheduling problem. Besides, the elevator real-time scheduling and reallocation functions are realized based on RPSO in case new information is available or the elevator becomes busy because it is unavailable or full. This study contributes a new scheduling algorithm for EGCS, and expands the application of PSO.

Group control for procedural rules:parameterized complexity and consecutive domains

We consider GROUP CONTROL BY ADDING INDIVIDUALS(GCAI)in the setting of group identification for two procedural rules-the consensus-start-respecting rule and the liberal-start-respecting rule.It is known that GCAI for both rules are NP-hard,but whether they are fixed-parameter tractable with respect to the number of distinguished individuals remained open.We resolve both open problems in the affirmative.In addition,we strengthen the NP-hardness of GCAI by showing that,with respect to the natural parameter the number of added individuals,GCAI for both rules are W[2]-hard.Notably,the W[2]-hardness for the liberal-startrespecting rule holds even when restricted to a very special case where the qualifications of individuals satisfy the so-called consecutive ones property.However,for the consensus-startrespecting rule,the problem becomes polynomial-time solvable in this special case.We also study a dual restriction where the disqualifications of individuals fulfill the consecutive ones property,and show that under this restriction GCAI for both rules turn out to be polynomial-time solvable.Our reductions for showing W[2]-hardness also imply several algorithmic lowerbounds.

Group Hybrid Coordination Control of Multi-Agent Systems With Time-Delays and Additive Noises

A new kind of group coordination control problemgroup hybrid coordination control is investigated in this paper.The group hybrid coordination control means that in a whole multi-agent system(MAS)that consists of two subgroups with communications between them,agents in the two subgroups achieve consensus and containment,respectively.For MASs with both time-delays and additive noises,two group control protocols are proposed to solve this problem for the containment-oriented case and consensus-oriented case,respectively.By developing a new analysis idea,some sufficient conditions and necessary conditions related to the communication intensity betw een the two subgroups are obtained for the following two types of group hybrid coordination behavior:1)Agents in one subgroup and in another subgroup achieve weak consensus and containment,respectively;2)Agents in one subgroup and in another subgroup achieve strong consensus and containment,respectively.It is revealed that the decay of the communication impact betw een the two subgroups is necessary for the consensus-oriented case.Finally,the validity of the group control results is verified by several simulation examples.

Optimization of group control strategy and analysis of energy saving in refrigeration plant

This study proposes a group control system optimization strategy coupled with a refrigeration plant model for a primary pump variable flow system,in order to improve the automation level of the refrigeration plant and maximize the energy saving potential.First,the control variables,optimization objectives,and operational con-straints of the entire system were analyzed.Then,by collecting the operational data for each component and combining these data with theoretical analysis,the sub models were designed and the input parameters,output parameters,and optimization variables of each sub-model were defined.Next,the sub-models were coupled and the control variables of the operational combination,leading to the lowest overall system energy consumption,were obtained using a particle swarm optimization algorithm.Finally,considering a medical building in North China as an example,the application effectiveness of the optimal control strategy of the refrigeration plant was analyzed.The results showed that the energy-savings of the group control system after the optimization of the re-frigerator,chilled water pump,cooling water pump,and cooling tower could reach 9.42,8.04,5.67,and 14.64%,respectively.This is a remarkable energy-savings benefit.The research described in this study also provides some reference for the design of group control systems in refrigeration plants.

GROUP VELOCITY CONTROL SCHEME WITH LOW DISSIPATION

In order to prevent smearing the discontinuity, a modified term is added to the third order Upwind Compact Difference scheme to lower the dissipation error. Moreover, the dispersion error is controled to hold back the non physical oscillation by means of the group velocity control. The scheme is used to simulate the interactions of shock density stratified interface and the disturbed interface developing to vortex rollers. Numerical results are satisfactory.

Elevator Group-Control Policy Based on Neural Network Optimized by Genetic Algorithm

Aiming at the diversity and nonlinearity of the elevator system control target, an effective group method based on a hybrid algorithm of genetic algorithm and neural network is presented in this paper. The genetic algorithm is used to search the weight of the neural network. At the same time, the multi-objective-based evaluation function is adopted, in which there are three main indicators including the passenger waiting time, car passengers number and the number of stops. Different weights are given to meet the actual needs. The optimal values of the evaluation function are obtained, and the optimal dispatch control of the elevator group control system based on neural network is realized. By analyzing the running of the elevator group control system, all the processes and steps are presented. The validity of the hybrid algorithm is verified by the dynamic imitation performance.

A Dynamic Active Multicast Group Access Control Framework Based on Trust Management System

The current multicast model provides no access control mechanism. Any host can send data directly to a multicast address or join a multicast group to become a member, which brings safety problems to multicast. In this paper, we present a new active multicast group access control mechanism that is founded on trust management. This structure can solve the problem that exists in multicast members＇ access control and distributing authorization of traditional IP multicast.

QoE Assessment of Group Synchronization Control Scheme with Prediction in Work Using Haptic Media

This paper proposes a group synchronization control scheme with prediction in work using haptic media. The scheme adjusts the output timing among multiple terminals and keeps the interactivity high. It outputs position information by predicting the future position later than the position included in the last-received information by a fixed amount of time. It also advances the output time of position information at each local terminal by the same amount of time. We deal with two different types of work using haptic media so as to demonstrate the effectiveness of the scheme. We assess the output quality of haptic media for the two types of work subjectively and objectively by Quality of Experience (QoE) assessment. We further clarify the relationship between subjective and objective assessment results.

Controllability of heterogeneous interdependent group systems under undirected and directed topology

The controllability problem of heterogeneous interdependent group systems with undirected and directed topology is investigated in this paper. First, the interdependent model of the heterogeneous system is set up according to the difference of individual characteristics. An extended distributed protocol with the external sliding-mode control is designed, under which it is shown that a heterogeneous interdependent group system is controllable when the corresponding communication topology is controllable. Then, using the network eigenvalue method, the driving individuals are determined for a heterogeneous system with undirected topology. Under directed topology, the maximum match method is utilized to confirm the driving individuals. Some sufficient and necessary conditions are presented to assure that the heterogeneous interdependent group system is structurally controllable. Via theoretical analysis, the controllability of heterogeneous interdependent systems is related to the interdependent manner and the structure of the heterogeneous system. Numerical simulations are provided to demonstrate the effectiveness of the theoretical results.

Origin and controlling factors of chlorite coatings—an example from the reservoir of T_3x Group of the Baojie area,Sichuan Basin,China

The study of the chlorite coatings always attracts scholars in China and other countries because the chlorite coatings play an important role in the preservation of residual primary pores in sandstone reservoirs.At present,the study of the origin and the controlling factors is relatively few.The occurrence,time of formation,genesis,controlling factors,and the mechanism of chlorite coatings inhibiting quartz overgrowths were studied in detail with thin section and SEM analysis.Samples were from the sandstone reservoirs of the T3x Group in the Baojie area,the transitional zone from the middle to the south of Sichuan Basin.The results indicate that the chlorite coatings on the walls of the pore spaces are oriented perpendicular to grain surfaces in the form of isopachous(even-thickness) grain-coating,while the chlorite coatings at the contacts between adjacent detrital grains are arranged with a preferred orientation tangential to the surface of detrital grains.The chlorite coatings were formed in the eogenetic stage.They were formed by recrystallization of Fe-rich clay films during the syndepositional period,and chlorite cements would be recrystallized after the coatings’ formation.The formation of chlorite coatings was mainly controlled by the depositional environment,provenance conditions,and diagenetic environment.The presence of chlorite coatings could result in the preservation of primary pores in deeply buried sandstone reservoirs by effectively inhibiting quartz overgrowths and the development of compaction and pressure solution.

THE CONTROL OF POLYMETHACRYLATE MOLECULAR STRUCTURE BY GROUP TRANSFER POLYMERIZATION

INTRODUCTION Group transfer polymerization (GTP) is a method for controlling the structure of acrylic polymers in which reactive chain ends are covalentiy bound to a trimethylsilyl group. In the presence of a catalyst, monomer inserts into these chain ends between the silyl group and the last monomer unit. The process is illustrated by equation (1) for methyl methacrylate. GTP is a living polymerization, i. e., there is little or no chain termination and no chain transfer. A significant advantage of GTP is that it

Some Group Runs Based Multivariate Control Charts for Monitoring the Process Mean Vector

In this article, we propose two control charts namely, the “Multivariate Group Runs’ (MV-GR-M)” and the “Multivariate Modified Group Runs’ (MV-MGR-M)” control charts, based on the multivariate normal processes, for monitoring the process mean vector. Methods to obtain the design parameters and operations of these control charts are discussed. Performances of the proposed charts are compared with some existing control charts. It is verified that, the proposed charts give a significant reduction in the out-of-control “Average Time to Signal” (ATS) in the zero state, as well in the steady state compared to the Hotelling’s T2 and the synthetic T2 control charts.

Analysis of the Effect of Subgroup Size on the X-Bar Control Chart Using Forensic Science Laboratory Sample Influx Data

This paper analyzes the effect of subgroup size on the x-bar chart characteristics using sample influx (SIF) into forensic science laboratory (FSL). The characteristics studied include changes in out-or-control points (OCP), upper control limit UCLx, and zonal demarcations. Multi-rules were used to identify the number of out-of-control-points, Nocp as violations using five control chart rules applied separately. A sensitivity analysis on the Nocp was applied for subgroup size, k, and number of sigma above the mean value to determine the upper control limit, UCLx. A computer code was implemented using a FORTRAN code to create x-bar control-charts and capture OCP and other control-chart characteristics with increasing k from 2 to 25. For each value of k, a complete series of average values, Q(p), of specific length, Nsg, was created from which statistical analysis was conducted and compared to the original SIF data, S(t). The variation of number of out-of-control points or violations, Nocp, for different control-charts rules with increasing k was determined to follow a decaying exponential function, Nocp = Ae–α, for which, the goodness of fit was established, and the R2 value approached unity for Rule #4 and #5 only. The goodness of fit was established to be the new criteria for rational subgroup-size range, for Rules #5 and #4 only, which involve a count of 6 consecutive points decreasing and 8 consecutive points above the selected control limit (σ/3 above the grand mean), respectively. Using this criterion, the rational subgroup range was established to be 4 ≤ k ≤ 20 for the two x-bar control chart rules.

Bone Marrow Transplant Long-Term Survivors’ Satisfaction with Quality of Life: Comparison with a Control Group

Purpose: To evaluate the global quality of life (QoL) of survivors with 10-year or more post-transplant, and to identify risk factors that interfere with well-being. Methods: This is a prospective analytic transversal study with 214 survivors of Bone Marrow Transplant (BMT) and 264 healthy people identified among blood donors, treated as the control group, of both sexes, 18 years or older. The protocol includes a demographic-socioeconomic questionnaire, World Health Organization Quality of Life (WHOQOL) and the Karnofsky Performance Status Scale. Results: 53.7% of the survivor group members are satisfied with their QoL. A similar result can be found in the control group (54.2%). Chronological maturity, anxiety, sexual difficulty, and being a provider are factors that interfere negatively in the QoL of male survivors. In female survivors, the risk factors are anxiety, low educational level, not having a stable partner, being a provider, and not being Caucasian. Conclusions: Survivors are as satisfied with their QoL as the control group. QoL is understood as a perceptive process composed of objective (functional and relational capacity) and subjective phenomenon (perceptive composition).

Consensus intuitionistic fuzzy group decision-making method for aircraft cockpit display and control system evaluation

A novel group decision-making （GDM） method based on intuitionistic fuzzy sets （IFSs） is developed to evaluate the ergonomics of aircraft cockpit display and control system （ACDCS）. The GDM process with four steps is discussed. Firstly, approaches are proposed to transform four types of common judgement representations into a unified expression by the form of the IFS, and the features of unifications are analyzed. Then, the aggregation operator called the IFSs weighted averaging （IFSWA） operator is taken to synthesize decision-makers’ （DMs’） preferences by the form of the IFS. In this operator, the DM’s reliability weights factors are determined based on the distance measure between their preferences. Finally, an improved score function is used to rank alternatives and to get the best one. An illustrative example proves the proposed method is effective to valuate the ergonomics of the ACDCS.

基于分组控制策略的风电场储能容量优化配置

为解决风电出力的波动性和不确定性问题,提出一种基于电池储能分组控制策略并计及其运行不平衡性的风电场电池储能容量优化配置方法。首先,在比较分析不同电池储能分组策略基础上,提出风储联合系统三电池组分组控制策略及充放电运行模式,并构建计及经济成本、衰减指标和寿命期限的多目标电池储能容量配置优化模型;然后,采用变分模态分解法处理风电数据,并通过非支配排序遗传算法与CRITIC-TOPSIS综合决策法联合求解获取最佳的电池储能容量配置方案;最后,通过与现有分组控制策略对比,验证该文所提出的三电池分组策略在改善电池储能充放电不平衡性以及减缓损耗方面的有效性,并对比不同目标和不同决策方法下的电池储能配置方案,结果表明该文提出的多目标优化模型与综合决策方法在延长电池使用寿命的同时保证经济性方面具有明显优势。

企业数字化转型促进了资本跨区域流动吗——基于异地并购视角的研究

加快资本跨区域流动对构建以国内大循环为主体、国内国际双循环相互促进的新发展格局具有重要的战略意义。本文以2008—2022年中国A股上市公司为样本,借助异地并购这一重要的资本跨区域流动形式,考察新发展格局下企业数字化转型对资本跨区域流动的影响。研究发现:企业数字化转型通过降低并购交易成本和提高集团管控能力,有效地促进了异地并购决策,尤其对跨省并购决策的促进作用更显著。异质性分析结果表明,当并购企业所在地区市场化程度更高、税负水平更低、数字金融发展水平更高以及目标企业所在地区营商环境更好时,企业数字化转型对异地并购决策的促进作用更强;同时,这一促进作用在民营企业、非高新技术企业以及高管具有金融背景或海外背景的企业中更显著。本研究丰富了数字经济时代资本跨区域流动驱动因素的研究,从异地并购视角提供了企业数字化转型促进资本跨区域流动的微观证据。

机力通风冷却塔风机自寻优群控方法研究

机力通风冷却塔以占地面积小的显著优点,在中小型基建工程中得到广泛应用。为提升中小型基建工程外冷系统的节能性和可靠性、改进传统多风机控制方法,创新性地提出了一种基于累计运行时间的机力通风冷却塔风机自寻优群控方法。将多风机整体化控制改进为顺序化联动控制,可有效降低风机启动门槛出力、消除整体化控制固有缺陷,满足非线性、时变性、大滞后系统控制的节能、可靠需求。经工程验证:该方法是一种契合纯变频电机配置冷却塔系统的多风机控制方法。该方法风机出力柔和、控制线性度好、系统易镇定、稳态偏差小;能够通过累计运行时间参数比对,实现风机自动交互运行,运行可靠性高。该方法的提出与实际应用可对配置机力通风冷却塔的中小型基建工程的安全节能运行提供借鉴。

国内集团管控研究的热点问题及演进趋势

集团管控体系作为集团企业持续发展的基石,是企业效益和竞争力的动力来源.以2002—2023年CNKI数据库收录的与国内集团管控相关的期刊论文为样本,利用信息可视化软件CiteSpace分析有关集团管控的研究主题,梳理近二十年的研究和不同阶段研究的特点,研究发现国内集团管控研究群体正处在高速发展时期,集团管控研究机构主要集中在大型国央企、研究院所和高校,研究热点集中于集团治理结构、集团公司战略管理、集团公司内部控制、集团公司管控模式与机制、集团公司创新管控五个方面,研究视角趋向多元化,并呈现多学科交叉的趋势.在新形势下,企业集团的数字化管控和国际化管控是值得关注的方向.