Epithermal gold deposits are typical precious metal deposits related to volcanic and subvolcanic magmatism.Due to the lack of direct geological and petrographic evidences,the origin of the ore-forming fluid is deduced...Epithermal gold deposits are typical precious metal deposits related to volcanic and subvolcanic magmatism.Due to the lack of direct geological and petrographic evidences,the origin of the ore-forming fluid is deduced from the spatial diagenesis-mineralization relationship,chronological data,physicochemical characteristics of mineral fluid inclusions,mineral or rock elements and isotopic geochemical characteristics.By objectively examining this scientific problem via a geological field survey and petrographic analysis of the Gaosongshan epithermal gold deposit,we recently discovered and verified the following points:(1) Pyrite-bearing spherical quartz aggregates (PSQA) occur in the rhyolitic porphyry;(2) the mineralization is structurally dominated by WNW- and ENE-trending systems and occurs mostly in hydrothermal breccias and pyrite-quartz veins,and the ore types are mainly hematite-crusted quartz,hydrothermal breccia,massive pyrite-quartz,etc.;(3) the alteration types consist of prevalent silicification,sericitization,propylitization and carbonation,with local adularization and illitization.The ore minerals are mainly pyrite,primary hematite,native gold,and electrum,with lesser amounts of chalcopyrite,magnetite,sphalerite,and galena,indicating a characteristic epithermal low-sulfidation deposit.The ore-forming fluid may have been primarily derived from magmatic fluid exsolved from a crystallizing rhyolitic porphyry magma.Further zircon U-Pb geochronology,fluid inclusion,physicochemical and isotopic geochemical analyses revealed that (1) rhyolitic porphyry magmatism occurred at 104.6 ± 1.0 Ma,whereas the crystallization of the PSQA occurred at 100.8 ± 2.1 Ma;(2) the hydrothermal fluid of the pre-ore stage was an exsolved CO2-bearing H2O-NaCl magmatic fluid that produced inclusions mainly composed of pure vapor (PV),vapor-rich (WV) and liquid-rich (WL) inclusions with a small number of melt-(M) and solid-bearing (S) inclusions;mineralization-stage quartz contains WL and rare PV,WV and pure liquid (PL) inclusions characterized by the H2O-NaCl system with low formation temperatures and low salinities;(3) the characteristics of hydrogen,oxygen,sulfur,and lead isotopes and those of rare earth elements (REEs) provide insight into the affinity between PSQA and orebodies resulting from juvenile crust or enriched mantle.Combined with previous research on the mineralogenetic epoch (99.32 ± 0.01 Ma),we further confirm that the mineralization of the deposit occurred in the late Early Cretaceous,which coincides with the extension of the continental margin induced by subduction of the Pacific Plate beneath the Eurasian Plate.The formation of the ore deposit was proceeded by a series of magmatic and hydrothermal events,including melting of enriched juvenile crust,upwelling,the eruption and emplacement of the rhyolitic magma,the exsolution and accumulation of magmatic hydrothermal fluid,decompression,the cooling and immiscibility/boiling of the fluid,and mixing of the magmatic fluid with meteoric water,in association with water-rock interaction.展开更多
The Weiquan Ag-polymetallic deposit is located on the southern margin of the Central Asian Orogenic Belt and in the western segment of the Aqishan-Yamansu arc belt in East Tianshan,northwestern China. Its orebodies, c...The Weiquan Ag-polymetallic deposit is located on the southern margin of the Central Asian Orogenic Belt and in the western segment of the Aqishan-Yamansu arc belt in East Tianshan,northwestern China. Its orebodies, controlled by faults, occur in the lower Carboniferous volcanosedimentary rocks of the Yamansu Formation as irregular veins and lenses. Four stages of mineralization have been recognized on the basis of mineral assemblages, ore fabrics, and crosscutting relationships among the ore veins. Stage I is the skarn stage(garnet + pyroxene), Stage Ⅱ is the retrograde alteration stage(epidote + chlorite + magnetite ± hematite 士 actinolite ± quartz),Stage Ⅲ is the sulfide stage(Ag and Bi minerals + pyrite + chalcopyrite + galena + sphalerite + quartz ± calcite ± tetrahedrite),and Stage IV is the carbonate stage(quartz + calcite ± pyrite). Skarnization,silicification, carbonatization,epidotization,chloritization, sericitization, and actinolitization are the principal types of hydrothermal alteration. LAICP-MS U-Pb dating yielded ages of 326.5±4.5 and 298.5±1.5 Ma for zircons from the tuff and diorite porphyry, respectively. Given that the tuff is wall rock and that the orebodies are cut by a late diorite porphyry dike, the ages of the tuff and the diorite porphyry provide lower and upper time limits on the age of ore formation. The δ13C values of the calcite samples range from-2.5‰ to 2.3‰, the δ18OH2 Oand δDVSMOWvalues of the sulfide stage(Stage Ⅲ) vary from 1.1‰ to 5.2‰ and-111.7‰ to-66.1‰, respectively,and the δ13C, δ18OH2 Oand δDV-SMOWvalues of calcite in one Stage IV sample are 1.5‰,-0.3‰, and-115.6‰, respectively. Carbon, hydrogen, and oxygen isotopic compositions indicate that the ore-forming fluids evolved gradually from magmatic to meteoric sources. The δ34SV-CDTvalues of the sulfides have a large range from-6.9‰ to 1.4‰, with an average of-2.2‰, indicating a magmatic source, possibly with sedimentary contributions. The206Pb/204Pb,207Pb/204Pb, and208Pb/204Pb ratios of the sulfides are 17.9848-18.2785,15.5188-15.6536, and 37.8125-38.4650, respectively, and one whole-rock sample at Weiquan yields206Pb/204Pb,207Pb/204Pb, and208Pb/204Pb ratios of 18.2060, 15.5674, and 38.0511,respectively. Lead isotopic systems suggest that the ore-forming materials of the Weiquan deposit were derived from a mixed source involving mantle and crustal components. Based on geological features, zircon U-Pb dating, and C-H-OS-Pb isotopic data, it can be concluded that the Weiquan polymetallic deposit is a skarn type that formed in a tectonic setting spanning a period from subduction to post-collision. The ore materials were sourced from magmatic ore-forming fluids that mixed with components derived from host rocks during their ascent, and a gradual mixing with meteoric water took place in the later stages.展开更多
The Huoshenmiao δeposit is Mo skarn δeposit, located in the western part of the Luanchuan ore δistrict.Mineralization process can be δivided into a skarn and a quartz-sulfide episodes with six stages: prograde(I),...The Huoshenmiao δeposit is Mo skarn δeposit, located in the western part of the Luanchuan ore δistrict.Mineralization process can be δivided into a skarn and a quartz-sulfide episodes with six stages: prograde(I), retrograde(II), quartz-K-feldspar(III), quartz-molybdenite(IV), quartz-pyrite(V), and quartzcalcite(VI). A combined study of geochronology, fluid inclusion(FI), and stable isotopes was conducted to constrain the mineralization age, source of ore materials, as well as the origin and evolution of the ore-forming fluids. Molybdenite Ree Os δating indicates that the δeposit was formed in the Late Jurassic(~145 Ma). The δ^(34)S values of sulfides range from 3.0‰ to 7.1‰, implying that the ore materials in the δeposit are magmatic in origin. Three types and six subtypes of FIs are δistinguished, namely, aqueous two-phase(W_1-and W_2-type), δaughter mineral-bearing multiphase(S_1-and S_2-type), and CO_2-bearing three-phase(C_1-and C_2-type). In stages I and II, the W_1-type FIs δisplay homogenization temperatures(Th) from 496°C to >600°C, with salinities of 14.9-18.3 wt.% NaCl eqv. The FIs in stages III, IV and early stage V composed of coeval S-, C-and W-types, respectively homogenize at similar Th, suggesting the occurrence of boiling. The W1-type FIs in late stage V and stage VI, yield Th of 102-406°C and salinities of 0-4.7 wt.% NaCl eqv. The δD_(H_2O)and δ^(18) O(H_2O)values of the ore-forming fluids in quartz-sulfide episode vary from-112‰ to-76‰, and 11.0‰ to 1.0‰, respectively. All these above observations reveal that the early ore-forming fluids are magmatic in origin, and characterized by high temperature and moderate to high salinity, and gradually evolve to low temperature, low salinity meteoric water. The Huoshenmiao Mo δeposit is associated with the magmatism event induced by the protracted subduction of the Izanagi plate beneath the eastern China continent. The δecrease in temperature, salinity and f(O_2), as well as change of p H δue to boiling and fluid-rock interaction, are the main factors controlling Mo δeposition.展开更多
The Yinchanggou-Qiluogou Pb-Zn deposit,located in the western Yangtze Block,southwest China,is hosted by the Upper Sinian Dengying Formation dolostone.Ore bodies occur in the Qiluogou anticline and the NS-and NNW-tren...The Yinchanggou-Qiluogou Pb-Zn deposit,located in the western Yangtze Block,southwest China,is hosted by the Upper Sinian Dengying Formation dolostone.Ore bodies occur in the Qiluogou anticline and the NS-and NNW-trending faults.Sulfide ores mainly consist of sphalerite,pyrite,galena and calcite,with subordinate dolomite and quartz.Seventeen ore bodies have been discovered to date and they have a combined 1.0 million tons of sulfide ores with average grades of 2.27wt%Zn and 6.89wt%Pb.The δD(H2O-SMOW) and δ18O(H2O-SMOW) values of fluid inclusions in quartz and calcite samples range from-68.9‰ to-48.7‰ and 7.3‰ to 15.9‰,respectively,suggesting that H2O in the hydrothermal fluids sourced from metamorphic water.Calcite samples have δ13C(PDB) values ranging from-6.2‰ to-4.1‰ and δ18O(SMOW) values ranging from 15.1‰ to 17.4‰,indicating C and O in the hydrothermal fluids likely derived from a mixed source of metamorphic fluids and the host carbonates.The δ34S(CDT) values of sulfide minerals range from 5.5‰ to 20.3‰,suggesting that thermal chemical reduction of sulfate minerals in evaporates were the most probable source of S in the hydrothermal fluids.The 206Pb/204Pb,207Pb/204Pb and 208Pb/204Pb ratios of sulfide minerals fall in the range of 18.11 to 18.40,15.66 to 15.76 and 38.25 to 38.88,respectively.The Pb isotopic data of the studied deposit plot near the upper crust Pb evolution curve and overlap with the age-corrected Proterozoic basement rocks and the Upper Sinian Dengying Formation hosting dolostone.This indicates that the Pb originated from a mixed source of the basement metamorphic rocks and the ore-hosting carbonate rocks.The ore geology and C-H-O-S-Pb isotopic data suggest that the YinchanggouQiluogou deposit is an unusual carbonate-hosted,strata-bound and epigenetic deposit that derived ore-forming materials from a mixed source of the underlying Porterozoic basements and the Sinian hosting carbonates.展开更多
Thermochemical sulfate reduction (TSR) in geological deposits can account for the accumulation of H2S in deep sour gas reservoirs. In this paper, thermal simulation experiments on the reaction of CH4-CaSO4 were carri...Thermochemical sulfate reduction (TSR) in geological deposits can account for the accumulation of H2S in deep sour gas reservoirs. In this paper, thermal simulation experiments on the reaction of CH4-CaSO4 were carried out using an autoclave at high temperatures and high pressures. The products were characterized with analytical methods including carbon isotope analysis. It is found that the reaction can proceed to produce H2S, H2O and CaCO3 as the main products. Based on the experimental results, the carbon kinetic isotope fractionation was investigated, and the value of Ki (kinetic isotope effect) was calculated. The results obtained in this paper can provide useful information to explain the occurrence of H2S in deep carbonate gas reservoirs.展开更多
TheWulong lode deposit contains over 80 tonnes of gold with an average grade of 5.35 g/t.It is one of the largest deposits in Dandong City,Liaoning Province in northeast China.Previous studies on the deposit focused o...TheWulong lode deposit contains over 80 tonnes of gold with an average grade of 5.35 g/t.It is one of the largest deposits in Dandong City,Liaoning Province in northeast China.Previous studies on the deposit focused on its geological characteristics,geochemistry,fluid inclusions,and the timing of gold mineralization.However,controversy remains regarding the origin of the ore-forming fluids and metals,and the genesis of the gold deposit.This paper presents zircon UePb and pyrite RbeSr ages and S,Pb,He,and Ar isotopic results along with quartz H and O isotopic data for all litho-units associated with the deposit.Laser ablation inductively coupled mass spectrometry measurements yielded zircon UePb dates for samples of pre-mineralization rocks like granite porphyry dike,the Sanguliu granodiorite,fine-grained diorite,and syn-mineralization diorite,as well as post-mineralization dolerite,and lamprophyre;their emplacement ages are 1261 Ma,1241 Ma,1231 Ma,1201 Ma,1192 Ma,and 1152 Ma,respectively.The pyrite RbeSr isochron age is 1191 Ma,indicating that both magmatism and mineralization occurred during the Early Cretaceous.The d18OH2O values of ore-forming hydrothermal fluids from the quartzepolymetallic sulfide vein stage vary from 4.8&to 6.5&,and the dDV-SMOW values are between67.7&and75.9&,indicating that the ore-forming fluids were primarily magmatic.The noble gas isotope compositions of fluid inclusions hosted in pyrite suggest that the ore-forming fluids were dominantly derived from crustal sources with minor mantle input.Sulfur isotopic values of pyrite vary between 0.2&and 3.5&,suggesting that S was derived from a homogeneous magmatic source or possibly from fluids derived from the crust.The Pb isotopic compositions of sulfides(207Pb/204Pb?15.51 e15.71,206Pb/204Pb?17.35e18.75,208Pb/204Pb?38.27e40.03)indicate that the Pb of the Wulong gold deposit is a mixture of crust and mantle components.Geochronological and geochemical data,together with the regional geological history,indicate that Early Cretaceous magmatism and mineralization of the Wulong gold deposit occurred during the rollback of the subducting Paleo-Pacific Plate,which resulted in lithospheric thinning and the destruction of the North China Craton(NCC),which indicates that the deposit is of magmaticehydrothermal origin.展开更多
The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inc...The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ^(18)O_(H_2O) values and δD values of the fluid range from -6.94‰ to -5.33‰ and from -95.31‰ to -48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from -0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.展开更多
The barium deposits in Ankang and Xunyang counties,Shaanxi Province,China,occur in the northernmost part of the world-class barium metallogenic belt in south Qinling.The deposits are hosted by the Lower Silurian carbo...The barium deposits in Ankang and Xunyang counties,Shaanxi Province,China,occur in the northernmost part of the world-class barium metallogenic belt in south Qinling.The deposits are hosted by the Lower Silurian carbonaceous siliceous rocks,with a unique combination of barite and witherite.The homogenization temperatures of fluid inclusions in the barite are mainly concentrated between 135 and 155 ℃,whereas those from the witherite have two peaks of 165-175 ℃,and 215-225℃,respectively.Laser Raman analysis of fluid inclusions indicates that the vapor phase of fluid inclusions in barite is dominated by H_2O,although some contains N_2,H_2S,and CH_4.The compositions of the vapor and liquid phases of fluid inclusions in witherite can be divided into two end-members,one dominated by H_2O without other volatiles,and the other containing CH_4,C_2H_6,C_3H_8,C_2H_4,and C_6H_6 in addition to H_2O.CO_2,H_2S,and some CH_4 are interpreted as products of chemical reactions during mineralization.Organic gases(CH_4,C_2H_6,C_3H_8,C_2H_4,and C_6H_6) in the fluids were critical in the formation of barium sulfate versus carbonate.The δ^(34)S values of barite range from 38.26‰ to54.23‰(CDT),the δ^(34)S values of sulfides coexisting with barium minerals vary from 22.44‰ to25.11‰(CDT),and those in the wall rock from 11.60‰ to 19.06‰(CDT).We propose that the SO_4^(2-)generally experienced bacterial sulfate reduction in seawater before mineralization,and some SO_4^(2-)also experienced thermochemical sulfate reduction in hydrothermal system during mineralization.The δ^(13)C values of witherite range from-27.30‰ to-11.80‰(PDB),suggesting that carbon was sourced from organic substances(like CH_4,C_2H_4,and C_2H_6).The formation of witherite was possibly associated with thermochemical sulfate reduction,which caused the consumption of the organic gases and SO_4^(2-) in the hydrothermal solutions,consequently inhibiting barite formation.The important conditions for forming witherite include high fluid temperatures,high Ba^(2+) concentrations,CO_2 in the fluids,low HS^- concentrations,and the subsequent rapid diffusion of H_2S during thermochemical sulfate reduction of the fluids.展开更多
The Jinman deposit is a Ag-bearing copper vein deposit located at the north marginof the Lanping-Simao back-arc basin in West Yunnan. Systematic studies of fluid inclusions andstable isotopes are presented in this pap...The Jinman deposit is a Ag-bearing copper vein deposit located at the north marginof the Lanping-Simao back-arc basin in West Yunnan. Systematic studies of fluid inclusions andstable isotopes are presented in this paper. The filling-replacement stage and the boiling-exhala-tive precipitation stage of mineralization took place at T1 = 140 - 280℃ and T2 = 94 - 204℃under pressure of (600 - 1200) ×105 Pa. The salinity of ore-forming solutions ranges from 5 wt%-20. 8 wt% (NaCl). Sulphide δ34S(CDT) values are in the rang of - 9.6‰ - + 11.03% witha range of 22. 66‰ showing an apparent "pagoda"-shaped distribution in histogram. Mean-while, the δ34S values of the various sulphides are consistent with the characters of isotope equi-librium fractionation, i. e., δ34SPy>δ34 SCp> δ34SBn. The TS/TOC ratios of the ores are widelyvariable between 0.16 and 5. 54 with no correlation of any kind can be established. Accirding to themodel of Ohmoto, the oxidation-reduction ratios of sulfur species in ore-forming solutions at the twomineralization stages were calculated to be R’1 = 2. 16×10(-17) and R’2 = 1. 55×104. δ13CCO2 (PDB)values obtained from fluid inclusions in calcite and quartz are between - 8.12‰ - - 3. 18‰, av-eraging - 5. 26‰, which are comparable with the isotopic composition of mantle-derived CO2.Inclusions in quartz yield δ13CCH4(PDB) between - 32. 11‰ and - 22. 04‰ (averaging- 26. 69‰),similar to that of methane in modern geothermal gases. For the ore-forming soutions, δ18OH2O(SMOW) values are between - 10. 57‰ and + 9. 77‰ and δDH2O(SMOW) are between - 51‰and - 135‰. Considering the effect of isotope exchange during waterrock reactions, most ofthe data are plotted along or close to the line defined by the reaction of meteoric water withclastic rocks, while a small part of the points fall near the reaction line of magmatic water withclastic rocks. In δ13C vs. δ18O diagram, the ore-forming soutions are plotted for the most partinto the mixing area between the meteoric fluid and the deep-seated fluid and partially on themixing line of P = 1.展开更多
基金financially supported by the National Key Research and Development Program of China (Grant No.2017YFC0601306)the National Natural Science Foundation of China (Grant No.41390444)+1 种基金the Program of the China Geological Survey(Grant No.DD20160344)supported by Team 707, Heilongjiang Bureau of Geological Exploration for Nonferrous Metals
文摘Epithermal gold deposits are typical precious metal deposits related to volcanic and subvolcanic magmatism.Due to the lack of direct geological and petrographic evidences,the origin of the ore-forming fluid is deduced from the spatial diagenesis-mineralization relationship,chronological data,physicochemical characteristics of mineral fluid inclusions,mineral or rock elements and isotopic geochemical characteristics.By objectively examining this scientific problem via a geological field survey and petrographic analysis of the Gaosongshan epithermal gold deposit,we recently discovered and verified the following points:(1) Pyrite-bearing spherical quartz aggregates (PSQA) occur in the rhyolitic porphyry;(2) the mineralization is structurally dominated by WNW- and ENE-trending systems and occurs mostly in hydrothermal breccias and pyrite-quartz veins,and the ore types are mainly hematite-crusted quartz,hydrothermal breccia,massive pyrite-quartz,etc.;(3) the alteration types consist of prevalent silicification,sericitization,propylitization and carbonation,with local adularization and illitization.The ore minerals are mainly pyrite,primary hematite,native gold,and electrum,with lesser amounts of chalcopyrite,magnetite,sphalerite,and galena,indicating a characteristic epithermal low-sulfidation deposit.The ore-forming fluid may have been primarily derived from magmatic fluid exsolved from a crystallizing rhyolitic porphyry magma.Further zircon U-Pb geochronology,fluid inclusion,physicochemical and isotopic geochemical analyses revealed that (1) rhyolitic porphyry magmatism occurred at 104.6 ± 1.0 Ma,whereas the crystallization of the PSQA occurred at 100.8 ± 2.1 Ma;(2) the hydrothermal fluid of the pre-ore stage was an exsolved CO2-bearing H2O-NaCl magmatic fluid that produced inclusions mainly composed of pure vapor (PV),vapor-rich (WV) and liquid-rich (WL) inclusions with a small number of melt-(M) and solid-bearing (S) inclusions;mineralization-stage quartz contains WL and rare PV,WV and pure liquid (PL) inclusions characterized by the H2O-NaCl system with low formation temperatures and low salinities;(3) the characteristics of hydrogen,oxygen,sulfur,and lead isotopes and those of rare earth elements (REEs) provide insight into the affinity between PSQA and orebodies resulting from juvenile crust or enriched mantle.Combined with previous research on the mineralogenetic epoch (99.32 ± 0.01 Ma),we further confirm that the mineralization of the deposit occurred in the late Early Cretaceous,which coincides with the extension of the continental margin induced by subduction of the Pacific Plate beneath the Eurasian Plate.The formation of the ore deposit was proceeded by a series of magmatic and hydrothermal events,including melting of enriched juvenile crust,upwelling,the eruption and emplacement of the rhyolitic magma,the exsolution and accumulation of magmatic hydrothermal fluid,decompression,the cooling and immiscibility/boiling of the fluid,and mixing of the magmatic fluid with meteoric water,in association with water-rock interaction.
基金funded by the China Geological Survey (No. 1212011220731)
文摘The Weiquan Ag-polymetallic deposit is located on the southern margin of the Central Asian Orogenic Belt and in the western segment of the Aqishan-Yamansu arc belt in East Tianshan,northwestern China. Its orebodies, controlled by faults, occur in the lower Carboniferous volcanosedimentary rocks of the Yamansu Formation as irregular veins and lenses. Four stages of mineralization have been recognized on the basis of mineral assemblages, ore fabrics, and crosscutting relationships among the ore veins. Stage I is the skarn stage(garnet + pyroxene), Stage Ⅱ is the retrograde alteration stage(epidote + chlorite + magnetite ± hematite 士 actinolite ± quartz),Stage Ⅲ is the sulfide stage(Ag and Bi minerals + pyrite + chalcopyrite + galena + sphalerite + quartz ± calcite ± tetrahedrite),and Stage IV is the carbonate stage(quartz + calcite ± pyrite). Skarnization,silicification, carbonatization,epidotization,chloritization, sericitization, and actinolitization are the principal types of hydrothermal alteration. LAICP-MS U-Pb dating yielded ages of 326.5±4.5 and 298.5±1.5 Ma for zircons from the tuff and diorite porphyry, respectively. Given that the tuff is wall rock and that the orebodies are cut by a late diorite porphyry dike, the ages of the tuff and the diorite porphyry provide lower and upper time limits on the age of ore formation. The δ13C values of the calcite samples range from-2.5‰ to 2.3‰, the δ18OH2 Oand δDVSMOWvalues of the sulfide stage(Stage Ⅲ) vary from 1.1‰ to 5.2‰ and-111.7‰ to-66.1‰, respectively,and the δ13C, δ18OH2 Oand δDV-SMOWvalues of calcite in one Stage IV sample are 1.5‰,-0.3‰, and-115.6‰, respectively. Carbon, hydrogen, and oxygen isotopic compositions indicate that the ore-forming fluids evolved gradually from magmatic to meteoric sources. The δ34SV-CDTvalues of the sulfides have a large range from-6.9‰ to 1.4‰, with an average of-2.2‰, indicating a magmatic source, possibly with sedimentary contributions. The206Pb/204Pb,207Pb/204Pb, and208Pb/204Pb ratios of the sulfides are 17.9848-18.2785,15.5188-15.6536, and 37.8125-38.4650, respectively, and one whole-rock sample at Weiquan yields206Pb/204Pb,207Pb/204Pb, and208Pb/204Pb ratios of 18.2060, 15.5674, and 38.0511,respectively. Lead isotopic systems suggest that the ore-forming materials of the Weiquan deposit were derived from a mixed source involving mantle and crustal components. Based on geological features, zircon U-Pb dating, and C-H-OS-Pb isotopic data, it can be concluded that the Weiquan polymetallic deposit is a skarn type that formed in a tectonic setting spanning a period from subduction to post-collision. The ore materials were sourced from magmatic ore-forming fluids that mixed with components derived from host rocks during their ascent, and a gradual mixing with meteoric water took place in the later stages.
基金funded by the National Key R&D Plan (Nos. 2017YFC0601403 and 2016YFC0600106)the National Natural Science Foundation of China (No. 41272110)the basic research program of the First Institute of Oceanography (No. 2015T02)
文摘The Huoshenmiao δeposit is Mo skarn δeposit, located in the western part of the Luanchuan ore δistrict.Mineralization process can be δivided into a skarn and a quartz-sulfide episodes with six stages: prograde(I), retrograde(II), quartz-K-feldspar(III), quartz-molybdenite(IV), quartz-pyrite(V), and quartzcalcite(VI). A combined study of geochronology, fluid inclusion(FI), and stable isotopes was conducted to constrain the mineralization age, source of ore materials, as well as the origin and evolution of the ore-forming fluids. Molybdenite Ree Os δating indicates that the δeposit was formed in the Late Jurassic(~145 Ma). The δ^(34)S values of sulfides range from 3.0‰ to 7.1‰, implying that the ore materials in the δeposit are magmatic in origin. Three types and six subtypes of FIs are δistinguished, namely, aqueous two-phase(W_1-and W_2-type), δaughter mineral-bearing multiphase(S_1-and S_2-type), and CO_2-bearing three-phase(C_1-and C_2-type). In stages I and II, the W_1-type FIs δisplay homogenization temperatures(Th) from 496°C to >600°C, with salinities of 14.9-18.3 wt.% NaCl eqv. The FIs in stages III, IV and early stage V composed of coeval S-, C-and W-types, respectively homogenize at similar Th, suggesting the occurrence of boiling. The W1-type FIs in late stage V and stage VI, yield Th of 102-406°C and salinities of 0-4.7 wt.% NaCl eqv. The δD_(H_2O)and δ^(18) O(H_2O)values of the ore-forming fluids in quartz-sulfide episode vary from-112‰ to-76‰, and 11.0‰ to 1.0‰, respectively. All these above observations reveal that the early ore-forming fluids are magmatic in origin, and characterized by high temperature and moderate to high salinity, and gradually evolve to low temperature, low salinity meteoric water. The Huoshenmiao Mo δeposit is associated with the magmatism event induced by the protracted subduction of the Izanagi plate beneath the eastern China continent. The δecrease in temperature, salinity and f(O_2), as well as change of p H δue to boiling and fluid-rock interaction, are the main factors controlling Mo δeposition.
基金financially supported by the National Basic Research Program of China(973 Program,No. 2014CB440905)the Key Program of National Natural Science Foundation(No.41430315)the National Natural Science Foundation of China(Nos.41272111 and 41163001)
文摘The Yinchanggou-Qiluogou Pb-Zn deposit,located in the western Yangtze Block,southwest China,is hosted by the Upper Sinian Dengying Formation dolostone.Ore bodies occur in the Qiluogou anticline and the NS-and NNW-trending faults.Sulfide ores mainly consist of sphalerite,pyrite,galena and calcite,with subordinate dolomite and quartz.Seventeen ore bodies have been discovered to date and they have a combined 1.0 million tons of sulfide ores with average grades of 2.27wt%Zn and 6.89wt%Pb.The δD(H2O-SMOW) and δ18O(H2O-SMOW) values of fluid inclusions in quartz and calcite samples range from-68.9‰ to-48.7‰ and 7.3‰ to 15.9‰,respectively,suggesting that H2O in the hydrothermal fluids sourced from metamorphic water.Calcite samples have δ13C(PDB) values ranging from-6.2‰ to-4.1‰ and δ18O(SMOW) values ranging from 15.1‰ to 17.4‰,indicating C and O in the hydrothermal fluids likely derived from a mixed source of metamorphic fluids and the host carbonates.The δ34S(CDT) values of sulfide minerals range from 5.5‰ to 20.3‰,suggesting that thermal chemical reduction of sulfate minerals in evaporates were the most probable source of S in the hydrothermal fluids.The 206Pb/204Pb,207Pb/204Pb and 208Pb/204Pb ratios of sulfide minerals fall in the range of 18.11 to 18.40,15.66 to 15.76 and 38.25 to 38.88,respectively.The Pb isotopic data of the studied deposit plot near the upper crust Pb evolution curve and overlap with the age-corrected Proterozoic basement rocks and the Upper Sinian Dengying Formation hosting dolostone.This indicates that the Pb originated from a mixed source of the basement metamorphic rocks and the ore-hosting carbonate rocks.The ore geology and C-H-O-S-Pb isotopic data suggest that the YinchanggouQiluogou deposit is an unusual carbonate-hosted,strata-bound and epigenetic deposit that derived ore-forming materials from a mixed source of the underlying Porterozoic basements and the Sinian hosting carbonates.
文摘Thermochemical sulfate reduction (TSR) in geological deposits can account for the accumulation of H2S in deep sour gas reservoirs. In this paper, thermal simulation experiments on the reaction of CH4-CaSO4 were carried out using an autoclave at high temperatures and high pressures. The products were characterized with analytical methods including carbon isotope analysis. It is found that the reaction can proceed to produce H2S, H2O and CaCO3 as the main products. Based on the experimental results, the carbon kinetic isotope fractionation was investigated, and the value of Ki (kinetic isotope effect) was calculated. The results obtained in this paper can provide useful information to explain the occurrence of H2S in deep carbonate gas reservoirs.
基金supported by the National Key Research and Development Program (Grand Nos. 2018YFC0603804, 2016YFC0600108-09)the National Natural Science Foundation of China (41502093)the Geological Investigation Project of the China Geological Survey (DD20160049)
文摘TheWulong lode deposit contains over 80 tonnes of gold with an average grade of 5.35 g/t.It is one of the largest deposits in Dandong City,Liaoning Province in northeast China.Previous studies on the deposit focused on its geological characteristics,geochemistry,fluid inclusions,and the timing of gold mineralization.However,controversy remains regarding the origin of the ore-forming fluids and metals,and the genesis of the gold deposit.This paper presents zircon UePb and pyrite RbeSr ages and S,Pb,He,and Ar isotopic results along with quartz H and O isotopic data for all litho-units associated with the deposit.Laser ablation inductively coupled mass spectrometry measurements yielded zircon UePb dates for samples of pre-mineralization rocks like granite porphyry dike,the Sanguliu granodiorite,fine-grained diorite,and syn-mineralization diorite,as well as post-mineralization dolerite,and lamprophyre;their emplacement ages are 1261 Ma,1241 Ma,1231 Ma,1201 Ma,1192 Ma,and 1152 Ma,respectively.The pyrite RbeSr isochron age is 1191 Ma,indicating that both magmatism and mineralization occurred during the Early Cretaceous.The d18OH2O values of ore-forming hydrothermal fluids from the quartzepolymetallic sulfide vein stage vary from 4.8&to 6.5&,and the dDV-SMOW values are between67.7&and75.9&,indicating that the ore-forming fluids were primarily magmatic.The noble gas isotope compositions of fluid inclusions hosted in pyrite suggest that the ore-forming fluids were dominantly derived from crustal sources with minor mantle input.Sulfur isotopic values of pyrite vary between 0.2&and 3.5&,suggesting that S was derived from a homogeneous magmatic source or possibly from fluids derived from the crust.The Pb isotopic compositions of sulfides(207Pb/204Pb?15.51 e15.71,206Pb/204Pb?17.35e18.75,208Pb/204Pb?38.27e40.03)indicate that the Pb of the Wulong gold deposit is a mixture of crust and mantle components.Geochronological and geochemical data,together with the regional geological history,indicate that Early Cretaceous magmatism and mineralization of the Wulong gold deposit occurred during the rollback of the subducting Paleo-Pacific Plate,which resulted in lithospheric thinning and the destruction of the North China Craton(NCC),which indicates that the deposit is of magmaticehydrothermal origin.
基金financially supported by the National Key R&D Program of China(2017YFC0601201-2)funds from the Chinese Ministry of Land and Resources for public welfare industry research(201411026-1)the Chinese Geological Survey Project(DD20160071)
文摘The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ^(18)O_(H_2O) values and δD values of the fluid range from -6.94‰ to -5.33‰ and from -95.31‰ to -48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from -0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.
基金jointly supported by the National Natural Science Foundation of China(grant nos. 41173062 and 40573032)the 111 project under the Ministry of Education and the State Administration of Foreign Experts Affairs,China(grant no.B07011)
文摘The barium deposits in Ankang and Xunyang counties,Shaanxi Province,China,occur in the northernmost part of the world-class barium metallogenic belt in south Qinling.The deposits are hosted by the Lower Silurian carbonaceous siliceous rocks,with a unique combination of barite and witherite.The homogenization temperatures of fluid inclusions in the barite are mainly concentrated between 135 and 155 ℃,whereas those from the witherite have two peaks of 165-175 ℃,and 215-225℃,respectively.Laser Raman analysis of fluid inclusions indicates that the vapor phase of fluid inclusions in barite is dominated by H_2O,although some contains N_2,H_2S,and CH_4.The compositions of the vapor and liquid phases of fluid inclusions in witherite can be divided into two end-members,one dominated by H_2O without other volatiles,and the other containing CH_4,C_2H_6,C_3H_8,C_2H_4,and C_6H_6 in addition to H_2O.CO_2,H_2S,and some CH_4 are interpreted as products of chemical reactions during mineralization.Organic gases(CH_4,C_2H_6,C_3H_8,C_2H_4,and C_6H_6) in the fluids were critical in the formation of barium sulfate versus carbonate.The δ^(34)S values of barite range from 38.26‰ to54.23‰(CDT),the δ^(34)S values of sulfides coexisting with barium minerals vary from 22.44‰ to25.11‰(CDT),and those in the wall rock from 11.60‰ to 19.06‰(CDT).We propose that the SO_4^(2-)generally experienced bacterial sulfate reduction in seawater before mineralization,and some SO_4^(2-)also experienced thermochemical sulfate reduction in hydrothermal system during mineralization.The δ^(13)C values of witherite range from-27.30‰ to-11.80‰(PDB),suggesting that carbon was sourced from organic substances(like CH_4,C_2H_4,and C_2H_6).The formation of witherite was possibly associated with thermochemical sulfate reduction,which caused the consumption of the organic gases and SO_4^(2-) in the hydrothermal solutions,consequently inhibiting barite formation.The important conditions for forming witherite include high fluid temperatures,high Ba^(2+) concentrations,CO_2 in the fluids,low HS^- concentrations,and the subsequent rapid diffusion of H_2S during thermochemical sulfate reduction of the fluids.
文摘The Jinman deposit is a Ag-bearing copper vein deposit located at the north marginof the Lanping-Simao back-arc basin in West Yunnan. Systematic studies of fluid inclusions andstable isotopes are presented in this paper. The filling-replacement stage and the boiling-exhala-tive precipitation stage of mineralization took place at T1 = 140 - 280℃ and T2 = 94 - 204℃under pressure of (600 - 1200) ×105 Pa. The salinity of ore-forming solutions ranges from 5 wt%-20. 8 wt% (NaCl). Sulphide δ34S(CDT) values are in the rang of - 9.6‰ - + 11.03% witha range of 22. 66‰ showing an apparent "pagoda"-shaped distribution in histogram. Mean-while, the δ34S values of the various sulphides are consistent with the characters of isotope equi-librium fractionation, i. e., δ34SPy>δ34 SCp> δ34SBn. The TS/TOC ratios of the ores are widelyvariable between 0.16 and 5. 54 with no correlation of any kind can be established. Accirding to themodel of Ohmoto, the oxidation-reduction ratios of sulfur species in ore-forming solutions at the twomineralization stages were calculated to be R’1 = 2. 16×10(-17) and R’2 = 1. 55×104. δ13CCO2 (PDB)values obtained from fluid inclusions in calcite and quartz are between - 8.12‰ - - 3. 18‰, av-eraging - 5. 26‰, which are comparable with the isotopic composition of mantle-derived CO2.Inclusions in quartz yield δ13CCH4(PDB) between - 32. 11‰ and - 22. 04‰ (averaging- 26. 69‰),similar to that of methane in modern geothermal gases. For the ore-forming soutions, δ18OH2O(SMOW) values are between - 10. 57‰ and + 9. 77‰ and δDH2O(SMOW) are between - 51‰and - 135‰. Considering the effect of isotope exchange during waterrock reactions, most ofthe data are plotted along or close to the line defined by the reaction of meteoric water withclastic rocks, while a small part of the points fall near the reaction line of magmatic water withclastic rocks. In δ13C vs. δ18O diagram, the ore-forming soutions are plotted for the most partinto the mixing area between the meteoric fluid and the deep-seated fluid and partially on themixing line of P = 1.